CO KVIC model based community biogas plant under Gobardhan plant under scheme of Swachh Bharat Mission at block Zainpora PH Awneera Civil Part

Earthwork in excavation by mechanical means (Hydraulic excavator )/ manual manua means over areas (exceeding 30cm in (exceedinc depth. 1.5m in width aswell Iatind1.5m nas in width as well as 10 sqm on plan) including getting out and disposal the excavated earth lead upto 50 m. and for all lift, as directed by Engineer in Charge

Extra for additional lift of 1.5 m or part thereof in excavation banking excavated or stacked materials

filing available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering. Lead upto 50m for all lift.

Providingand laying in position cement concrete of specified grade excluding the cost of centering and shuttering - Allwork 1 Cement: 3 corse sand 6 graded stone aggregate 20mm normal size crushed

Centering and shuttering including strutting, propping etc. and removal of form work for foundations, footings, bases for columns

Providing and laying in position cement concrete of specified grade including curing butexcluding the cost of centring and shuttering. All work upto plinth level with: 1:1.5:3 (1 cement 1.5 sand 3 graded stone aggregrate 1 nominal crurshed stone agg

einforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floo five level, excluding cost of centering, shuttering, finishing and reinforcement of specified grade 1:1.5:3(M20) of N/S stone aggregate 20 mm size including all carriages upto site of work

einforced cement concrete work in beams, suspended floors, roofs having slope up to 15" landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral staircases above plinth level up to floor five level excluding the cost of centering, shuttering. finishing and reinforcement, with 1:1.5:3 (1 cement: 1.5 coarse sand : Graded stone aggregrate (crushed 20mm N/S inc carriage

centering and Shuttering including strutting, propping etc. and removal of form for walls (any thickness) including attached pilasters, buttresses.plinth and string courses

Extra for shuttering in circular work (20% of respective centering and shuttering items

Extra for Lintels, Beams, plinth beams, girders, bressumets and cantilevers

Extra for columns, pillars, piers, abutments, posts and struts

steel and reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all hot rolled deformed bars

structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer

Providing and fixing 1 mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mmM.S. gusset plates at the setplate junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer

Providing corrugated galvanised iron sheets roofing inc vertical/ curved surface fixed with polymer coated J or L hooks,bolts and nuts 8mm dia with bitumen and G I limpet washers or with G I limpet wasers filled with white lead, inc a coat of approved steel primer and two coats of approved pait on over lapping of sheet complete upto any pitch in horizantal and vertical surface excuding the cost of purlins ,rafters and trusses 0.50mm thick with zinc coated not less than 275grms per square meter

Providing ridges or hips of width 60cm overall width plan G.S sheets fixed with polymer coated J or L hooks bolts and nuts 8mm dia with bitumen and G I limpet washers or with G I limpet wasers complete 0.50mm thick with zinc coated not less than 275grms per square meter

12mm cement plaster of mix 1:4 (1 cement: 4 fine sand)

20mm cement plaster of mix 1:4 (1 cement: 4 fine sand)

Finishing walls with water proofing cementpaint of required shade

Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M-30 grade made by block making machine with strong vibratory compaction, of approved size desian &shane size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge

Providing and laying at or near ground level factory made kerb eition to the stone of M-25 grade cement concrete in position to the required line, level and curvature, ne, level and curvature, jointed with cement mortar :3 1:3 (1 cement: 3 coarse sand). including making joints with or without grooves (thickness of joints except at sharp ot at sharp curve shall not to morethan 5 mm), including making drainage opening makindirection of Engineer- wherever required complete etc. as per direction hall be measured to in-charge (length of finished kerb edging shall be measur erb stone shall calculate volume for payment). (Precast C.C. kerb be approved by Engineer-in-charge

Earth work in excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. All kinds of soil :

Providing & laying of dry soling, hand packed, incl sand filling in voids in foundation including all leads , lifts and carriage head load etc upto site of work complete job

Providing and laying in position cement concrete of specified grade excluding the cost of Centering and shuttering all work up to plinth level 1:4:8 (1 cement: 4 course sand: 8 grade stone aggregate 20 mm nominal size(quarry) including all leads, lifts and carriage of material up to site of work)

Providing and laying in position cement concrete of specified grade excluding the cost of Centering and shuttering all work up to plinth level 1:2:4(1 cement: 2 course sand: 4 grade stone aggregate 20 mm nominal size(quarry) including all leads, lifts and carriage of material up to site of work)

Centering and shuttering including Strutting propping etc .and removal of form work for:-.Walls (any thickness )including attached plasters,buttresses,plinth and string course etc.

Providing and laying of 12 mm thick Plaster in 1:4 mix on inner and outer walls lincl carriage of all materials involved etc complete job.

Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-incharge. Made of G.I. wire of dia 4 mm

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work