Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹25.5 LAccepted-AOC | L1 | Accepted-AOC Being overall reasonable | |
| 2 | L2₹26.8 L+₹10,090 (0.38%)Rejected-Finance | L2 | Rejected-Finance Not lowest bidder | |
| 3 | L3₹27.3 L+₹64,948 (2.44%)Rejected-Finance SR NO 281 3 7 ANAND NAGAR NEAR DHANORI JAKAT NAKA LOHEGAON PUNE 411047 | PUNE | PUNE | MAHARASHTRA | 411047 | L3 | Rejected-Finance Not lowest bidder | |
| 4 | L4₹28.3 L+₹1.6 L (6.04%)Rejected-Finance 02 PADRI SHIV NAGAR SHIV NAGAR MAHARAJGANJ UTTAR PRADESH 273303 | MAHARAJGANJ | UTTAR PRADESH | 273303 | L4 | Rejected-Finance Not lowest bidder | |
| 5 | L5₹28.3 L+₹1.7 L (6.29%)Rejected-Finance GATE NO 454 01 TAPKIR NAGAR PUNE NASIK HIGHWAY NEAR GANDHARV NAGARI MOSHI PUNE 412 105 | PUNE | MAHARASHTRA | 412105 | L5 | Rejected-Finance Not lowest bidder |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
3 Sept 2024, 6:00 pmClosed
GE CENTRAL KHADKI
GE CENTRAL KHADKI RANGE HILLS ROAD KHADKI PUNE-411003
REPAIR/MAINT OF PUMP SETS INCLUDING REPLACEMENT OF PIPE LINES VALVES AND OTHER CONNECTED ACCESSORIES AT FILTERATION PLANT AT YPH UNDER AGE E/M-1 AT GE (C) KHADKI.
2024_MES_659443_2
8909/E8 OF 2024-2025
Open Tender
Electrical and Maintenance Works
Item Rate
270 days
YPH area
Class D Category a(ii)
7 documents required · 7 mandatory
₹500
GE CENTRAL KHADKI
₹90,000
Yes
12 Nov 2024
6 Jul 2024
6 Sept 2024
6 Jul 2024
3 Sept 2024
15 Jul 2024
6 Jul 2024 - 11 Jul 2024
Amount
Excavation in trenches n.exc 1.5 mtr wide and n.exc 1.5 mtr in depth for laying of pipes etc and getting out in soft / loose soil complete all as specified and directed.
Excavation in trenches n.exc 1.5 mtr wide and n.exc 1.5 mtr in depth for lying of pipes etc and getting out in soft disintegrated rock/Road cuttings complete all as specified and directed.
Removing surplus soil to a distance n.exc 50 mtr and depositing where directed at a level n.exc 1.5 mtr above the starting point complete all as specified and as directed.
Returning filling in trenches including spreading, leveling, watering and well ramming in layers n . Exc 25 cm complete all as specified and directed.
Material and Labour for attending emergency water supply breakdown complaint within 6 hours on telephonic intimation by arranging JCB/Excavator for excavation, breaking footpath paved with PCC blocks, PCC flooring, bituminus road etc up to 4 mtrs depth, dewatering with suitable dewatering pump, cutting and removing defective pipes,lowering the required size of pipes, valves and fittings with the help of crane and welding works if any, refilling the trench after repair with excavated soil, relaying of removed PCC blocks and matching with sorroundings etc complete including PCC work as directed at site. NOTE :- (1) Materials required for the repairs such as pipes, fittings, valves, Mechanical joints, PCC, PCC blocks etc will be measured and paid under relevant item. (2) Items such as Rubber gaskets, Nuts,bolts, washers and lathe work required for the pipe line of required size etc are to be included in the quoted rate. (3) the contractor shall provide sufficient barricades, caution tape,danger boards etc at work site to avoid any accidents at site. (4) If the contractor fails to start the work within 6 hours on receipt of telephonic intimation. Necessary recovery will be made twice the quoted rates of respective items. (5) Compensation if any due to any accident at site to be borne by the contractor.
Material and labour for taking up cast iron water mains (incl all fitting) 80mm bore dia of pipe with spigot and socket ends from trenches complete all as specified and directed.
Description all as item no.6 above but size of pipe 100 mm bore
Description all as item no.6 above but size of pipe 150 mm bore
Description all as item no.6 above but size of pipe 200 mm bore
Description all as item no.6 above but size of pipe 250 mm bore
Description all as item no.6 above but size of pipe 300 mm bore
Supply, laying, jointing & testing DI-pipes K7 class with spigot and socket, suitable for Push on rubber joint, with internal cement mortor lining and external zinc and black bitumen coated pipes in any lengths conforming to IS:8329-2000 including Rubber Gasket & joints as per IS:9523-2000 laid in trenches/ Road/ Ducts/ Footpath/ on wall/ on floor locations for 100 mm bore dia pipe complete all as specified and as directed. MAKE :- Electrosteel or its technocommercial equivalent in Jindal/Tata Metallic.
Description all as item no.12 above but 150 mm bore pipes.
Description all as item no.12 above but 200 mm bore pipes.
Description all as item no.12 above but 250 mm bore pipes.
Description all as item no.12 above but 300 mm bore pipes.
Material and labour for cutting cast iron pipes in position for insertion of fittings, mechanical joints, replacement of pipes etc for bore of pipe 80mm complete all as specified and directed.
Description all as item no.17 above but 100 bore pipes
Description all as item no.17 above but 150 bore pipes
Description all as item no.17 above but 200 bore pipes
Description all as item no.17 above but 250 bore pipes
Description all as item no.17 above but 300 bore pipes
Description all as item no.17 above but 450 bore pipes
Supply and fix MS mechanical joint with rubber washer, mild steel screw bolts (machine made) with screwed both ends of dia as per flange hole and required length each screwed end to be fitted with washers and one hexagonal nut suitable for bore of pipe 80mm complete all as specified and directed.
Description all as item no.24 above but 100 mm size.
Description all as item no.24 above but 150 mm size.
Description all as item no.24 above but 200 mm size.
Description all as item no.24above but 250 mm size.
Description all as item no.24 above but 300 mm size.
Description all as item no.24 above but 450 mm size.
Material and labour for ductile iron fittings such as bends (any type, radius and angle), tapers any type (straight, bend, incresing, decreasing or double socket etc.), Tee piece, single branch 'Y' junction double branch, collar etc., caps and plugs etc. as per IS: 9523-2000 of class K-7, with internal cement mortor lining and external zinc and black bitumen coated of dia upto 150 mm complete all as specified and directed
Description all as per item No. 31 above but of dia upto 200 to 300mm complete all as specified and directed
Material and labour for laying, jointing and testing MS Pipe 450 mm bore, 8 mm thick externally coated with anti corrosive paint with welded joints laid in trenches in lengths as required at site including taking out defective pipes all as directed at site.
Description all as per item No. 33 above but for MS Pipe 300mm bore dia.
Material and labour for MS fittings such as bends (any type, radius and angle), tapers any type (straight, bend, incresing, decreasing or double socket etc.), Tee piece, single branch 'Y'junction double branch, collar, caps and plugs etc of 8mm thick externally coated with anti corrosive paint duly welding the joints internally and externally of dia upto 250 mm complete all as specified and as directed.
Description all as per item No. 35 above but of dia upto 450 mm .
Material and labour for taking up worn out GI steel tubing incl all fitings from trenches of 15 mm bore complete all as specified and directed.
Description all as item no.37 above but 20 mm bore pipes.
Description all as item no.37 above but 25 mm bore pipes.
Description all as item no.37 above but 40 mm to 50 mm bore pipes.
Description all as item no.37 above but 80 mm bore pipes.
Description all as item no.37 above but 100 mm bore pipes.
Description all as item no.37 above but 150 mm bore pipes.
Material and labour for laying in trenches/fixed to wall galvanised steel water tubing 15 mm bore, medium grade with and including all medium grade fittings complete all as specified and as directed MAKE :- Jindal or its technocommercial equivalent in Tata/Prakash Surya
Description all as item no.44 above but 20 mm bore pipes.
Description all as item no.44 above but 25 mm bore pipes.
Description all as item no.44 above but 40 mm bore pipes.
Description all as item no.44 above but 50 mm bore pipes.
Description all as item no.44 above but 80 mm bore pipes.
Description all as item no.44 above but 100 mm bore pipes.
Description all as item no.44 above but 150 mm bore pipes.
Supply and fix in repair gun metal gate valve with iron wheel head, screwed both ends for iron pipes 15mm bore complete all as specified and directed. MAKE :- Zoloto or its technocommercial equivalent in Leader/Bir
Description all as item no.52 above but 20 mm bore
Description all as item no.52 above but 25 mm bore
Description all as item no.52 above but 40 mm bore
Description all as item no.52 above but 50 mm bore
Supply and fix in repairs CI body non raising SS spindle sluice valve with cast iron wheel, of size 80 mm bore, class PN-1.6 with SS spindle with brass nut, gasket etc with both ends flanged confirming to IS-14846 with standard bolts hole, fixing with nuts, bolts, washers, rubber gasket etc complete in position of pipe line all as specified and directed. MAKE :- Kirloskar or its technocommercial equivalent in Kartar/Bir
Description all as item no.57 above but 100 mm bore
Description all as item no.57 above but 150 mm bore
Description all as item no.57 above but 200 mm bore
Description all as item no.57 above but 250 mm bore
Description all as item no.57 above but 300 mm bore
Description all as item no.57 above but 450 mm bore
Supply and fix in repairs cast iron air release valves with twin globe air outlet,100 mm dia flanged including fittings as required at site, making necessary modification/ arrangements and on CI/MS/DI pipeline of bore up to 450 mm complete all as specified and as directed. MAKE :- Normex or its technocommercial equivalent in Kirloskar/Bir
Supply and fix in replacement of extended valve operating device 1.5 mtr long with 25 mm GI Pipe heavy grade duly welded with spindle cap and handle as per sample complete all as specified and directed by Engr-in-Charge.
Supply and fix in replacement of extended valve operating device 1.0 mtr long with 25 mm GI Pipe heavy grade duly welded with spindle cap and handle as per sample complete all as specified and directed by Engr-in-Charge.
Material and labour for spray painting of various pump set of capacity upto 100 HP and old metal surface such as suction /delivery pipes, with 2 coats of synthetic enamel paint, marking arrows, writing letters etc including preparation of surface by rubbing and removing all dirt complete all as specified and directed. MAKE :- Asian Paints or its technocommercial equivalent in Berger/Nerolac.
Material and labour for taking out defective filter media (Gravel layer of various size ) from filter bed, Scrapping, cleaning internally, supply and replacement of gravel filter media (1.5-3.00 mm, 3.00-6.00mm, 6.00-15mm,15.00-20mm size ) in layers (100mm to 200 mm ) as per samples for filter bed complete all as specified and directed by Engineer-in-Charge.
Supply and fix in repairs rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position of capacity 1000 Ltrs complete all as specified and directed by Engr-in-Charge. MAKE :- Sintex/Plasto
Supply and fix in repairs rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position of capacity 500 Ltrs complete all as specified and directed by Engr-in-Charge. MAKE :- Sintex/Plasto
Supply and fix in repairs cast Iron swing check non return valve confirming to IS : 5312 (Part I) of 1969, both end flanged with rubber gasket & Nuts, bolts & washers of sizes 150 mm bore. MAKE :- Normex or its technocommercial equivalent in Kirloskar/Bir
Description all as item no.71 above but 100 mm bore.
Supply and fix in repairs cast iron foot valve confirming to IS : 4038 flanged end with rubber gasket, Nuts, bolts & washers of sizes 150/200 mm bore complete all as specified and directed . MAKE :- Normex or its technocommercial equivalent in Kirloskar/Bir.
Description all as item no.73 above but 100 mm bore
Description all as item no.73 above but 80 mm bore
Material and labour for PCC 1:3:6 type-C2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete incl necessary form work werever required and incl demolition of Cement Concrete (un-reinforced) of any description and in any position not otherwise specifically provided for, all as specified and directed at site.
Material and labour for mild steel framed work with ends of bars souldered, welded or riveted or forged into spikes, framed guard bars, ladders, framed balusters, walk ways, railings, gates, frame work of water tank, valvepit and similar work confirming to Fe.290.Gde-E-165 incl painting with one coat of red oxide primer and one coats of anticorrosive black bituminous paint incl dismantling mild steel work of any description not otherwise specially provided for complete all as specified and directed.
Material and labour cement concrete type C-2,1:3:6 ( 40 mm graded stone aggregate ) in sub base 100 mm thick complete all as specified and directed.
Supply and fix 80 mm thick machine pressed precast concrete rubber moulded coloured interlocking paver block with coloured cement and pigment any shape and size confirming to IS-15658-2006 M-40 grade laid over 50 mm thick sand cushionining including dismantling of old paver blocks all as specified and as directed. MAKE :- Ultra or its technocommercial equivalent in Topaz.
Supply and fix in repair hot dipped galvanized chain link fencing with zinc coating, nominal height-2400mm, Pitch-50mm and wire dia 3.15 mm. (Minimum weight-2.55 Kg /Sqm) complete all as specified and directed.
Material and labour for mild steel work of angle fixed independently for fencing post and others confirming to Gde Fe 410-A incl cutting to dead end length where required, notching, drilling, fitting and/or welding or connecting with bolts and nuts incl dismentling taking down unsv one complete all as specified and directed.
Material and labour for TMT bars 10mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns hooking ends or as in horizontal bar for fixing in fencing and binding with and including mild steel wire (anealed) not less than 0.9mm dia or securingwith clips complete for support of chain link fencing incl dismentling taking down unsv one complete all as specified and as directed.
Dismantling taking out complete pump of any type, capacity 90 HP to 100 HP from foundation including dismentling suction and delivery pipe connection from pump , carrying to wksp & back and repair/overhauling complete and reassemble and fixing to original position after repair/overhauling with nuts, bolts, washers, pipe connection complete including testing, commissioning all as specified and directed. NOTE :- 1. spares required for the repairs will be measured and paid under respective items . 2. Small items such as gaskets, Nuts, bolts and washers, screws, consumable like grease etc are deemed to be included in the quoted rates.
Supply only Ball Bearing, (DE).
Supply only Ball Bearing (NDE).
Supply only Impeller.
Supply only pump Shaft.
Supply only lantern ring.
Supply only mechanical seal.
Supply only water deflector.
Supply only bush
Supply only key Impeller.
Supply only gland packing.
Supply only gasket set
Dismantling taking out complete pump of any type, capacity 15 HP to 30 HP of different models from foundation including dismentling suction and delivery pipe connection from pump , carrying to wksp & back and repair/overhauling complete and reassemble and fixing to original position after repair/overhauling with nuts, bolts, washers, pipe connection complete including testing, commissioning all as specified and directed. NOTE :- 1. Spares required for the repairs will be measured and paid under respective items . 2. Small items such as gaskets, Nuts, bolts and washers, screws, consumable like grease etc are deemed to be included in the quoted rates.
Supply only ball bearing, (DE).
Supply only ball bearing (NDE).
Supply only Impeller.
Supply only pump shaft.
Supply only lantern ring.
Supply only mechanical seal.
Supply only water deflector.
Supply only bush
Supply only key impeller.
Supply only gland packing.
Supply only gasket set
Dismantling taking out Induction motor 90 Hp to 100 HP from foundation by removing electric connection, coupling carefully and carrying to wksp & back for repair complete and reassemble and fixing to original position after repair/overhauling with nuts, bolts, washers, pipe connection and cable connection complete including testing, commissioning, proper alignment complete all as specified and as directed.
Dismantling taking out Induction motor 15 Hp to 30 Hp from foundation by removing electric connection, coupling carefully and carrying to wksp & back for repair complete and reassemble and fixing to original position after repair/overhauling with nuts, bolts, washers, pipe connection and cable connection complete including testing, commissioning, proper alignment all as specified and directed.
Material and labour for complete rewinding of motor any type after cutting, taking out old damaged winding from stator core, cleaning of slots, providing proper insulating materials/lock strip in the slots, rewinding with existing size of super enamelled coper wire, required binding, bonding, insulation, varnishing and drying and proper testing after rewinding for motor capacity 90 HP to 100 HP
Material and labour for complete rewinding of motor any type after cutting, taking out old damaged winding from stator core, cleaning of slots, providing proper insulating materials/lock strip in the slots, rewinding with existing size of super enamelled coper wire, required binding, bonding, insulation, varnishing and drying and proper testing after rewinding for the following sizes of motor capacity 15 HP to 30 HP
Material and labour for complete overhauling of Air Compressor of capacity 11 KW 3 phase, 19.5 Amps by taking out by taking out from foundation by removing electric connection, coupling carefully and carrying to wksp & back for repair complete and reassemble and fixing to original position after repair/overhauling with nuts, bolts, washers, pipe connection and cable connection complete including testing, commissioning, proper alignment complete all as specified and directed.
Description all as per item no. 112 above but for pump set of capacity upto 30 HP
Supply and fix in replacement of pump set complete of make : Kirloskar Model No: KDS 2030+ or its equivalent in jyoti/crompton having discharge capacity of 42 LPS at 22 mtr head made of cast iron impeller including taking out electrical connection and fixing in original position complete all as specified and as directed by Engr-in-Charge
Supply only following chemicals for water treatment :- NOTE :- Sample of chemical to be tested from PHE/NABL accredited lab before placing the order.
Calcium hypochlorite (65% to 70% chlorine content) calcium based granular disinfectant in 45 Kg Drum
Supply only alum ferric Gde -I
Supply only hydrated lime suitable for drinking water
Supply and fix in replacement MCCB 250 Amps having breaking capacity 36 KA 415V 3 pole complete all as directed by Engr-in-Charge. MAKE :- L&T or its technocommercial equivalent in Legrand/BCH
Supply and fix in replacement MCCB 200 Amps having breaking capacity 25 KA 415V 3 pole complete all as directed by Engr-in-Charge. MAKE :- L&T or its technocommercial equivalent in Legrand/BCH
Supply and fix in replacement MCCB 100 Amps having breaking capacity 16 KA 415V 3 pole complete all as directed by Engr-in-Charge. MAKE :- L&T or its technocommercial equivalent in Legrand/BCH
Supply and fix in replacement MCCB 63 Amps having breaking capacity 10 KA 415V 3 pole complete all as specified and as directed by Engr-in-Charge. MAKE :- L&T or its technocommercial equivalent in Legrand/BCH
Material and labour for 50 sqmm stranded copper conductor single core alongwith copper lugs including connecting from pump set to starter complete all as specified and directed. MAKE :- Polycab or its technocommercial equivalent in Finolex/KEI
Material and labour for cleaning of RCC semi UG clear water sump 1,00,000 gallon cap internally by brushing walls, floors and thorough washing and removing all dirt, muds etc by pumping out or by manually complete including writing date of cleaning with white letters in black back ground of size 80 mmx60 mm complete all as specified and directed by Engr-in-charge
Material and labour for cleaning of RCC semi UG clear water sump 50,000 gallon cap internally by brushing walls, floors and thorough washing and removing all dirt, muds etc by pumping out or by manually complete including writing date of cleaning with white letters in black back ground of size 80 mmx60 mm complete all as specified and directed by Engr-in-charge
Material and labour for cleaning of RCC semi UG clear water sump 20,000 gallon cap internally by brushing walls, floors and thorough washing and removing all dirt, muds etc by pumping out or by manually complete including writing date of cleaning with white letters in black back ground of size 80 mmx60 mm complete all as specified and directed by Engr-in-charge
Material and labour for chemical testing of water sample at PMC or at any govt recognised water testing lab for the following parameters: Turbidity, pH, Total Hardness, Alkalinity, Chloride, Nitrate, TDS, Iron, Flourides, calcium, Magnesium, Aluminium, Sulphide, Lead, Arsenic, Manganese, Copper, Mercury, residual chlorine. NOTE :- (i) Sample of water to be collected from pump houses in sterilised bottle provided by the lab (ii) Sample of water to be deposited to lab and report to be collected duly signed by authorised person of Lab, (iii) Cost of transportation of water sample and collection of report shall be inclusive of quoted rate (iv) Cost of testing as specified shall be paid to Lab directly by the contractor and the cost shall be inclusive of quoted rate (v) Testing shall be carried out in scheduled time, otherwise recovery shall be effected thrice the quoted rate (vi) Complete parameter testing shall be considered as one job (vii) Copy of testing report to submitted for claiming payment.
SUNHARI CONSTRUCTIONS (BID ID -3069090)
VP DEVELOPERS AND CONTRACTOR (BID ID -3067465)
JP ENTERPRISES (BID ID -3067652)
ONKAR ELECTRIC AND GENERAL STORE (BID ID -3069036)
M/s S S Enterprises (BID ID -3068706)
Om Construction (BID ID -3077696)
SKS Electricals (BID ID -3068269)
K.K.Enterprises (BID ID -3069172)
M/S kirpan Enterprises (BID ID -3079886)
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .