Loading…
Loading…
| # | Company | Amount | Status |
|---|---|---|---|
| 1 | ₹84.2 Laccepted-aoc | accepted-aoc |
Tender Value
₹84.6 L
EMD Value
₹1.7 L
Closing Date
18 Apr 2026, 9:30 pmClosed
Rural Development and Panchayat Raj Department
SHRIDEVI SHINTRE
Metalling and Ashpalting Road From Hulagabali Halyal Road to Kempi vasti Road km 0.00 to 2.00 at Hulagabali village in Athani Taluka of belagavi Dist
RDPR/2025-26/RD/WORK_INDENT23671/CALL-3
RDPR/2025-26/RD/WORK_INDENT23671/CALL-3
Open
Roads
Two Tender Document System(Two Cover)
RDPR Division Office Chikkodi
15 documents required · 15 mandatory
Minimum financial turnover civil engineering construction works not less than two times the annual payments from this contract Rs.85.00 Lakhs
Satisfactoriy completed (at least 90percent) as prime contractor at-least one such similar work of value not less than Rs.42.50 Lakhs (50percent of amount put tender)
Executed in any one year the following minimum quantities of work Excavation/Embankment 1860.00 Cum, GSB 764.00 Cum, Asphalting 3390.00 Sqm etc) (80percent of peak rate of construction)
Contractor KPWD Civil Registration Certificate
As per Govt Circular no GO-FD/AE 263/EXP12-2022 dt 11.05.2022, this clause for owning key equipment for works costing upto Rs 3.00 Crores is exempted
Address Proof and Mobile Number
Liquid assets and or availability of credit facilities of no less than Rs.30.00 Lakhs (estimated cash flow for 3 months of peak construction period)
Adhar card
List of existing commitments and ongoing works
List of works for which tenders already submitted
Banker Details for reference
Pan card
Bid Capacity
GST Certificate
Staff pattern
₹2,120
₹1.7 L
18 Apr 2026
6 Apr 2026
21 Apr 2026
17 Apr 2026
Metalling and Ashpalting Road From Hulagabali Halyal Road to Kempi vasti Road km 0.00 to 2.00 at Hulagabali village in Athani Taluka of belagavi Dist
Clearing and Grubbing Road Land: Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earli...
Scarifying Existing Granular Surface to a Depth of 50 mm by :Mechanical Means using Hydraulic excavator etc complete as per direction of the Engineer incharge of the work.
Compacting original ground supporting embankment
Loosening, leveling and Compacting original ground supportingembankment to facilitate placement of first layer of embankment,scarified to a depth of 15...
Construction of Embankment by excavating the available approved Gravel/ Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading...
Granular Sub-base - Grading III Construction of Granular Sub-Base by Mix in Place Method by providing well graded Gravel, spreading in uniform layers with motor grader on prepared surface, mixing by ...
Construction of Subgrade and Earthen Shoulders: Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading...
WBM Grading Grading-I (63 mm to 45 mm) - Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification includingspreading in uniform thickness, ...
WBM Grading-II (53 mm to 22.4 mm) Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification includingspreading in uniform thickness, hand pa...
Prime Coat over WMM/WBM: Providing and applying primer coat with SS1 grade Bitumen Emulsion on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0...
Providing and applying tack coat with RS I Bitumen emulsion using emulsion pressure distributor at the rate of 0.25 kg/m2 on the prepared Granular surface etc complete as per direction of the Engine...
Open - graded Premix Surfacing Providing, laying and rolling of open - graded premix surfacing of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using viscosity grade bitumen VG-30 to...
Seal Coat Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type A and B seal coats with bituminous binder VG-30 Case - ...
Providing and constructing un-reinforced plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M20 (Grade), c...
Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface:Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectoris...
Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC:67:2022 made of Class C Type XI retro reflective sheeting fixed over 2 mm thick aluminium sheeting vi...
Providing and fixing board displaying information, such as 'Name of work, Tender cost, Name of Contractor, Work completion and liability period etc', having rectangular shape of 1.20m x 0.90m size mad...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
kw-3 NEW GENERAL 23671 CALL 3.docx
Tender Document • 0.12 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .