NHIDCL/Admin/Off. Space/Remodeling/2020

Amount

ELECTRICAL WORKS SUB HEAD-I: WIRING & SUBMAIN

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.

Group C

Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point (without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required.

Group C

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.

2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

2 X 4 sq. mm + 1 X 4 sq. mm earth wire

2 X 6 sq. mm + 1 X 6 sq. mm earth wire

2 X 10 sq. mm + 1 X 6 sq. mm earth wire

4 X 4 sq. mm + 2 X 4 sq. mm earth wire

4 X 6 sq. mm + 2 X 6 sq. mm earth wire

4 X 10 sq. mm + 2 X 6 sq. mm earth wire

4 X 16 sq. mm + 2 X 6 sq. mm earth wire

Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. (For light plugs to be used in non residential buildings).

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required.

Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providng and fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 A modular switch, connections etc. as required. (For light plugs to be used in non residential buildings).

TV System

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

TV antenna socket outlet

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required.

1 or 2 Module (75mmX75mm)

Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required.

1 or 2 Module

Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required.

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

25 mm dia

32 mm dia

Telephone And Data System

Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required.

Supplying and drawing PVC insulated, PVC sheathed multicore un-armored taped telephone cables of 0.61 mm dia size in existing conduit pipe, of the following sizes.

Supplying and fixing of telephone distribution board (tag block) in hinged type MS box duly powder coated complete with bakelite sheet with terminal nation of incoming and outgoing telephone wire etc. complete as required.

Supplying and fiixing 2 pin Telephone modular socket & switch with modular plate,suitable size metal box and sheet cover including connection, testing, etc. as required.

Telephone socket with shtter outlet

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required.

1 or 2 Module (75mmX75mm)

Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required.

1 or 2 Module

Supplying and fixing 1 nos of CAT-6 , I/O with gang box, Face plate with G.I .box , RJ-45 Modem jack with shuter phenolic laminated sheet suitable size PVC/G.I. box as required. all complete as per instructions of client.

Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required

1 run of cable

Supplying and fixing of 24 PORT Switch 10/100/1000 Mbps Gigabit Smart switch. all complete as per instructions of client.

Supplying and fixing of 24 PORT UTP Patch Panel all complete as per instructions of client.

Providing and fixing 12 U wall mounted rack with rack accessarory i.e fan , bolts , power disribution box , cable manager etc. all complete as per instructions of client.

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

25 mm dia

32 mm dia

SUB HEAD-II: DISTRIBUTION BOARD

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/ Isolator)

8 way (4 + 24), Double door

12 way (4+36), Double door

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Single pole

Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.

Supplying and fixing following rating, four pole, 415 volts, MCB in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.

SUB HEAD-III: LIGHT FIXTURE

Supply, Installation, Testing & Commissioning of the following fixtures complete with all LED Lamp , Electronic Driver , fixing arrangements ball and sockets and suspension conduits connections, earthing complete with all hardware, clamps, etc as per specification & as per architects approved colour temperature. All fittings shall be sutaible for dimming. Vendor shall take approval on each fittings before delivering to site.

Supply, Installation, Testing & Commissioning of 75 x 3000 mm liner light ,40 W (system wattage ) LED light suspended type , with full diffuser 84% transferancy 6000k color temp and CRI >80%. The fitting shall be fixed with chain ,screws etc. The fitting shall be recessed mounted suitable for gypsum Ceiling , with full acrylic diffuser and delivered lumens 95 lumen> per watts , The rate shall include connection with 3 core 1.5 sqmm. flexible copper cable with Flexible Conduit. The brief specification of Fixture is as under : LED chip used. cost to include linking metal strips, wires, connectrors, and hardware material. Vendor shall order light fitting in each row is per site requirment Gear suspension wire included in cost with level adjustment studs .

Supply, Installation, Testing & Commissioning of 50 x 1500 mm liner light ,20 W (system wattage ) LED light suspended type , with full diffuser 84% transferancy 6000k color temp and CRI >80%. The fitting shall be fixed with chain ,screws etc. The fitting shall be recessed mounted suitable for gypsum Ceiling , with full acrylic diffuser and delivered lumens 95 lumen> per watts , The rate shall include connection with 3 core 1.5 sqmm. flexible copper cable with Flexible Conduit. The brief specification of Fixture is as under : LED chip used. cost to include linking metal strips, wires, connectrors, and hardware material. Vendor shall order light fitting in each row is per site requirment Gear suspension wire included in cost with level adjustment studs .

Supply, Installation, Testing & Commissioning of 50 x 2000 mm liner light ,40 W (system wattage ) LED light suspended type , with full diffuser 84% transferancy 6000k color temp and CRI >80%. The fitting shall be fixed with chain ,screws etc. The fitting shall be recessed mounted suitable for gypsum Ceiling , with full acrylic diffuser and delivered lumens 95 lumen> per watts , The rate shall include connection with 3 core 1.5 sqmm. flexible copper cable with Flexible Conduit. The brief specification of Fixture is as under : LED chip used. cost to include linking metal strips, wires, connectrors, and hardware material. Vendor shall order light fitting in each row is per site requirment Gear suspension wire included in cost with level adjustment studs .

Supply, Installation, Testing & Commissioning 12 w LED down light with ith all accessories and interconnecting with 3 core 1.5 sqmm PVC insulated multistrand wires and accessories as required as per the site conditions and as per prevailing relevant IS Code.

Supplying & fixing of 25W Track Light inside bulkhead etc complete with all fixing accessories as required as per prevailing relevant IS Code.

Supplying & fixing of 1 m track system for track light complete with all fixing accessories as required as per prevailing relevant IS Code : 1MTR3PHASETRACKTSWHT

Installation, testing and commissioning of wall bracket /ceiling fittings of all sizes and shapes containing upto two GLS/CFL/LED lamps per fitting, complete with all accessories including connections etc. as required.

SUB HEAD-IV : CABLE & END TERMINATIONS

Supply of MV cable

Supply, laying, testing and commissioning of 1100 Volt grade XLPE insulated aluminium conductor unarmoured cables including the cost of providing required gap between adjacent cables (minimum one cable dia.) and including the cost of providing identification tags etc. complete as per specification, as required.

4C- 6 sq mm Aluminium

4C- 16 sq mm Aluminium

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.

4C- 6 sq mm Aluminium

4 X 16 sq. mm (28mm)

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on cable tray as required.

Upto 35 sq. mm (clamped with 1mm thick saddle)

Supplying and installing following size of perforated painted with powder coating M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required.

150 mm width X 50 mm depth X 1.6 mm thickness

SUB HEAD-V: Racway

Supplying and fixing of following GI raceway system with neoprene gasketted removable cover fixed to the raceway by countersunk cadmium plated screws at 300 mm intervals recessed in floors including the cost of chasing and making good. The GI raceway system alongwith all fittings like bends, T-joints, couplers etc. shall be fabricated from 1.5 mm thick and covers from 1.6 mm thick electro galvanised GI sheets finished with powder coating paint finish of approved colour and shall include the cost of providing 2 nos 25 mm x 6 mm GI strips fixed to the metal portion in electrical contact throughout the length of the raceway complete as per specifications as required and as below.

300 mm wide x 25 mm deep /3 comportment

150 mm wide x 25mm deep /1 comportment

100 mm wide x 25mm deep /1 comportment

50 mm wide x 25mm deep /1 comportment

Supplying and fixing of following floor recessed junction boxes for GI raceway systems fabricated from 1.4 mm thick electro galvanized GI sheets finished with powder coating paint finish with 1.5 mm thick neoprene gasketted removable cover fixed by counter sunk cadmium plated screws including the cost of earth links at all joints to ensure earth continuity and including the cost of chasing and making good recess in floor etc complete as required and as below.

150mm X 150mm X 65-90 mm deep

350 mm x 350mm x 65-90 mm deep

Supplying and fixing 265 mm x 265 mm x 53 65-90 mm deep, 3 compartment epoxy coated metal clad Underfloor access outlet boxes as per standard with hinged cover, cable outlet grommets, earthing connectors with provision for 3 nos 3 pin 6 amp socket outlets, 1 set of Telephone outlet and 1 set of Data outlet with fixtures complete as required.

Supplying and installation of following sizes Vertical Access Box in recess/ on surface including chasing the wall/floor complete as required.

300mmX30MM /2 Comportment

LV WORKS - ADDRESSABLE TYPE FIRE DETECTION SYSTEM

Supply intalation,Testing & Commising of Intelligent addressable Microprocessor based Fixed rate of rise temperature type Heat Detector including mounting base with LED etc, complete as required

Supply intalation,Testing & Commising of Analogue Addressable photo Electric Smoke sensor having removable high performance chamber with Twin fire LED's allow 360 degree veiwing, lock mechanism ( sensor to base), Variable sestivity, Electronically addressed, approved by LPCB.

Supply installation,Testing & Commising of Dual Relay control Modul for AHU,Access System,Lift etc tripping

Supply installation,Testing & Commising of Dual input monitor Module for monitoring Sprinkler

Supply installation,Testing & Commising of Analogue Addressable Manual Call Point ESP Analogue Addressable Protocol having status LED for Alarming & standby mode,Electronically addressed, approved by LPCB.

Supply, installation, testing and commissioning of Sounder with signaling strobe light with 110 cd intensity as required.

Supply installation,Testing & Commising of Analogue Addressable Loop powered Wall Sounder providing 8 Volume levels & 51 Tones with a maximum o/p of upto 102 dB(A) with low current consumption, can be fitted on Isolator Type Base which is fully compatible with ESP Analogue Addressable Protocol Use

Supply, drawing, connecting, testing and commissioning of shielded 2 core 1.5 sq.mm single core PVC insulated FR-LSH copper cabe .

Supply, drawing, connecting, testing and commissioning of shielded 4 core 1.5 sq.mm single core PVC insulated FR-LSH copper cabe . (For interconnection between Fire Alarm Panel & Repeater Panel)

Supply & Fixing of following size sizes of exposed/concealed 2 mm think PVC conduit including all accessories complete as required and as per specifications.

25 mm dia PVC Conduit

Supplying & fixing of double sided LED signage (green/Red) with built in battery back-up for 2 hrs. etc. with all fixing accessories as required of Bajaj Cate. Ref. BESL 03 LED DSD WBB Green /RED or approved equivalent. : Philips/Havells/WIPRO or equivalent with approval of NHIDCL at the time of installation/execution.

CCTV System

SITC of 1/3-inch, CCD sensor color IP indoor UL / FCC listed dome camera with Progressive scan 4CIF resolution, Vari Focal lens 3.8 mm to 12 mm F1.2 auto iris , sensitivity 0.012 lux @ 30 IRE (Night Sense), Quad-stream video simultaneously — two H.264 streams, an I-frame recording stream and an M-JPEG stream, Removable MicroSD card for built in recording, POE enables, two way audio and audio alarm, ONVIF Compliant, Tamper and Motion Detection, operating temperature -20 to +50 deg cel., complete with Dome Housing IP 66 and NEMA‑4X, Connectors, Lens, Camera Mounts, Power Supply and all Ancillary Equipment & all accessories as per technical specification and should be UL listed.

SITC of 1/3-inch, CCD sensor color IP indoor UL / FCC listed BOX camera with Progressive scan 4CIF resolution, Vari Focal lens 5 mm to 50 mm F1.2 auto iris , sensitivity 0.012 lux @ 30 IRE (Night Sense), Camera should fully Support iscsi recording, Quad-stream video simultaneously — two H.264 streams, an I-frame recording stream and an M-JPEG stream, Removable MicroSD card for built in recording, POE enables, two way audio and audio alarm, ONVIF Compliant, Tamper and Motion Detection, operating temperature -20 to +50 deg cel., complete with Dome Housing IP 66 and NEMA‑4X, Connectors, Lens, Camera Mounts, Power Supply and all Ancillary Equipment & all accessories as per technical specification and should be UL /FCC listed.

SITC of Managed Layer -2 Switch with Power on Ethernet (PoE) enabled, with 24 nos. 10/100 base Tx PoE port, 1 no. dual personality Gbe Port for copper/fiber uplink, 3.7 Gbps switching capacity, 2.7 MPPS forwarding rate, maximum power consumption 135 watt. (For All Floors)

Wiring

SITC of AC power cable 3 X 1.5 sq.mm PVC insulated flexible FRLS copper conductor in 25 mm dia MS conduit from control room to network switches

SITC of CAT 6 cable for communication in 25 mm dia PVC conduit

SITC of 6 core Single Mode Fiber optics cable

SITC of 25 mm dia pvc conduit as required to connect and operate the system

Conference Audio System

SITC of 12.2" Pliggable long microphone of Bosch/ Siemens / Panasonic or equivalent with approval of NHIDCL at the time of installation/execution.

SITC of Microphone connection panel shall connect pluggable microphones to one of the audio inputs to the flush mount interface via RJ11 control inputs. Bosch/ Siemens / Panasonic or equivalent with approval of NHIDCL at the time of installation/execution.

SITC of The Microphone Control Panel shall be connected to the flush mount interface via one of the RJ11 control inputs Microphone on/off button, red nic on indicator, green request indicator, orange VIP indicator. Bosch/ Siemens / Panasonic or equivalent with approval of NHIDCL at the time of installation/execution.

SITC of Microphone priority panel for priority function for the chairman. Bosch/ Siemens / Panasonic or equivalent with approval of NHIDCL at the time of installation/execution.

DELEGATE UNIT: SITC of of interface unit to provide dual delegate mode for two microphones and two voting and card panels. Bosch/ Siemens / Panasonic or equivalent with approval of NHIDCL at the time of installation/execution..

SITC of Microphone connection panel shall connect pluggable microphones to one of the audio inputs top the flush mount interface via RJ11 control inputs. Bosch/ Siemens / Panasonic or equivalent with approval of NHIDCL at the time of installation/execution.

SITC of Matching end caps shall give a finishing touch to the flush mounted devices. Two end caps shall be needed per flush mount position. Bosch/ Siemens / Panasonic or equivalent with approval of NHIDCL at the time of installation/execution.

SITC of The coupling shall be used to flush mount and connect flush mount panels and ends caps. Bosch/ Siemens / Panasonic or equivalent with approval of NHIDCL at the time of installation/execution.

CENTRAL CONTROL UNIT SITC of of Include features for controlling delegate microphones, distributing simultaneous interpretation and conducting, voting sessions, all without an operator, connect upto 245 contribution units. Bosch/ Siemens / Panasonic or equivalent with approval of NHIDCL at the time of installation/execution.

CEILING SPEAKERS SITC of 24 Watts ceiling speaker. Bosch/ Siemens / Panasonic or equivalent with approval of NHIDCL at the time of installation/execution.

AMPLIFIER SITC of 240 Watts Amplifier Bosch/ Siemens / Panasonic or equivalent with approval of NHIDCL at the time of installation/execution.

POP UP BOX AND CABLES Supply of Desk top Plug Connection Panel having 2 nos network ports, 1 no. RGB port, 1 no audio port and 1 no Video port Universal Power Socket complete in all respect : BOSCH/ KRMAR or equivalent with approval of NHIDCL at the time of installation/execution.

SITC of 12 input presentation Scaler having 10 HDMI & 2 VGA Kramar or equivalent with approval of NHIDCL at the time of installation/execution.

SITC of of 4 port networking switch

SITC of of Cat 6 cable

SITC of of Audio cable

SITC of of RGB cable. Kramer or equivalent with approval of NHIDCL at the time of installation/execution.

SITC of HDMI cable

SITC of 1.5 Sq mm twin core cable.

HVAC WORKS

18HP (14.4 TR) nominal higher capacity

TFAU Capacity SP No. of Motor Ref. No. (Cfm) (mm WG) Rows Rating(HP) Load Nom.

TFA -1 2100 50 6 2 14.4 TR Note - The item is optional subject to required air quality.

COPPER PIPING (REFRIGERANT PIPING) Supply, Installation, Testing & Commissioning of high pressure copper refrigerant piping suitable for R 410a refrigerant of suitable size as required and duly insulated with 19mm/13mm thick closed cell elastomeric insulation in tubing form inclusive of glass cloth and UV treatment. External Refrigerant piping shall be laid on GI covered cable trays. Piping inside occupied spaces shall be supported using GI ladder type cable trays. The cost of GI covered cable tray and supports to be included in the quoted price. Entire refrigerant piping work be carried out in accordance with the specifications. Piping shall be of following sizes:

Pipe Size Min. Wall Insulation Size (O.D.) Thickness Thickness

28.6 mm 1.00 mm 19 mm

28.6 mm 1.00 mm 19 mm

22.9 mm 1.00 mm 13 mm

15.9 mm 1.00 mm 13 mm

FITTINGS Supply, Installation , Testing and Commissioning of following fittings to be provided in refrigerant pipe line. Material of construction for fittings shall be similar to refrigerant piping.

Y- joints for refrigerant piping (pair).

Drain Piping (CPVC) Supply & installation, testing and commissioning of Rigid heavy class CPVC piping complete with fittings, supports as per specifications and duly insulated with 6 mm thick closed cell crosslinked polyethylene (XLPE) tubular insulation.

(a.) 50 mm dia

(b.) 25 mm dia

AIR EXHAUST Ductwork Supply, Installation, Testing & Commissioning of circular /rectangular inline fans for exhaust air complete with accoustic insulation, sheet metal casing, direct driven centrifugal fan, motor with proper protection and inspection door. Fan shall be suitable for operation on 220+6 % volts, 50 Hz,1 phase AC power supply. Flanges to be provided on both sides to facilitate duct connections. Fan shall be installed as shown in the drawings and will be of following characteristics :

Conventional site fabricated ducts using Lock Forming Machines / closing machine Supply, Installation, Testing of factory fabricated ductwork complete with fire retardant gaskets, slip on flanges, wire rope suspension arrangement, GI perforated 'C' channel supports etc. in accordance with the approved drawings and specifications.

0.47 mm (26 gauge) GSS

Supply, Installation and Testing of 125mm deep Antivibration Flexible Joints made out of fire retardant fabric with extruded aluminium frame/ flange on both sides of approved .

Supply, Installation and Testing of multi blade type key operated louver dampers of galvanised steel sheet for collars to be provided with suitable links, levers and quadrants for manual control of volume of air flow and for proper balancing of the air distribution system as per the approved shop drawings and specifications.

300 x 300 diffusers suitable for fixing in gypsum ceiling.

Supply, Installation and Testing of extruded aluminium powder Coated air transfer grilles to be provided at the doors. Note- Optional

INSULATION Supply and Application of internal acoustic/ thermal insulation of ducting using open cell elastomeric insulation with adhesive, longitudinal & transverse joints sealed with adhesive in neat & clean manner. As per requirement.

10 mm Thick

PLUMBING WORKS

Providing and fixing wall hung water closet of approved shape & including providing & fixing concealed cistern with dual flush fitting, of flushing capacity as per the approaved , including seat cover, and cistern fittings, nuts, bolts and gasket etc complete. KOHLER or equivalent with approval of NHIDCL at the time of installation/execution.

Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin auto sensor tap of approved quality and , including painting of fittings and brackets, cutting and making good the walls wherever required: White Vitreous China Wash basin with a 15 mm CP Brass single hole basin mixer. KOHLER or equivalent with approval of NHIDCL at the time of installation/execution.

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and as approved by NHIDCL. KOHLER or equivalent with approval of NHIDCL at the time of installation/execution.

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931:15mm nominal bore - jaquar or equivalent with approval of NHIDCL at the time of installation/execution.

Providing and fixing white vitreous china with integrated sensor urinal shall have pre & post flushing with water, having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of NHIDCL. KOHLER or equivalent with approval of NHIDCL at the time of installation/execution.

Providing and Fixing liquid soap container of approaved , 112mm distance from wall with bracket of the same materials with snap fittings of approved quality colour and , weighing not less that 105gms. KOHLER or equivalent with approval of NHIDCL at the time of installation/execution.

Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & and as per the direction of NHIDCL.

Providing and fixing backlit mirror with all desired fittings as per the approaved & model. Mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. KOHLER or equivalent with approval of NHIDCL at the time of installation/execution.

Providing and Fixing fully automatic "NO TOUCH" hand drier suitable to operate on 220 volts, single phase 50 Hz, A.C power supply and directly plugged to power point complete. KOHLER or equivalent with approval of NHIDCL at the time of installation/execution.

Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of NHIDCL and finished smooth. White Agaria Marble Stone

Providing and fixing of pantry sink without drain board size 610 x510 x 200 mm depth with swival Tap including 40 mm wate bottle trap - Jaquar or equivalent with approval of NHIDCL at the time of installation/execution.

Providing, fixing, testing and commissioning of Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989 including all fitting.

110mm Pipe

Providing and fixing bend of required degree with access door, insertionrubber washer 3 mm thick, bolts and nuts complete.

Providing, fixing, testing and commissioning of UPVC soil,waste pipe conforming to IS : 4985-2000 class III (6 kg) including all moulding fittings conforming to IS : 7834 (Part I to Part-7) 1987 such as tees, bends, reducers, coupling, adaptor etc. solvent welded joints as per manufacturer recommendation including cutting and making good the walls, floors, R.C.C. work etc.

40 mm Pipe

63 mm Pipe

Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors:

110 mm diameter pipe

Cutting chases in brick masonry walls for following diameter sand cast iron/ centrifugally cast (spun) iron pipes and making good the same with cement concrete 1:3:6 (1 cement : 3 coarse sand :6 graded stone aggregate 12.5 mm nominal size), including necessary plaster and pointing in cement mortar 1:4 (1 cement : 4 coarse sand):

100 mm Pipe

Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) alround SW pipes including bed concrete as per standard design. (around horizontal upvc pipe vertical termaination to manhole)

100 mm diameter

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of NHIDCL. Concealed work, including cutting chases and making good the walls etc.

15 mm nominal outer dia pipes

20 mm nominal outer dia pipes

Providing and fixing of gun metal gate valve with CI wheel of approved quality (screwed ends)

20mm dia, nominal bore

FINISHING WORK

MASONRY WORK

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.

Cement mortar 1:4 (1 cement :4 coarse sand)

Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry

Plaster Work

Providing and applying 12 mm thick (average) premixed formulated one coat gypsum lightweight plaster having additives and light weight aggregates as vermiculite/ perlite respectively conforming to IS: 2547 (Part - 1 & II) 1976, applied on hacked / uneven background such as bare brick/ block/ RCC work on walls & ceiling at all floors and locations, finished in smooth line and level etc. complete.

Flooring & Cladding Work

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved , in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.

Size of Tile 600x600 mm

Size of Tile 1000x1000 mm

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved , in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete.

Size of Tile 600x600 mm

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved , in all colours, shades except burgundy, bottle green, black of any size as approved by NHIDCL, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and fixing loop pile carpet tiles or rolls as approved with precision tufted loop piles and with nylon backing or underlay of 8mm thick PU foam fixed to existing levelled floor with synthetic adhesives as approved by the manufacturer. All complete as per manufacturer specifications/approved sample and direction of NHIDCLs.

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade

Area of slab over 0.50 sqm

Wood Work

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.

35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.

Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality.

1.0 mm thick

Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured).

Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete :

Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.

Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete.

Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete.

Full Height storages Finished with Laminate

Providing and fixing Full height storage units of 645mm deep, 2400mm high in shape made in 19mm thick BWR plywood and finished in laminate of approved shade. The internal shelves shall be made in 19mm thick BWR plywood with timber edge lipping duly polished to match the finish. The shutters shall be made in 19mm thick BWR plywood with teak wood edge lipping Polished to match the shade of laminate.. The external surface shall be finished in 1mm thick laminate and internal surfaces shall be laminated with 0.8mm thick laminate of approved shade. This also includes providing necessary hardware like handles, hinges, tower bolts/ball catches, locks etc., as per the detail drawings. Note: Storage unit front surface area shall be considered for payment.

Low / Medium Height storages finished with Laminates (Overhead & Under Counter Storage)

Providing and fixing Low height storage units of 400mm deep, 750mm high in shape made in 19mm thick BWR plywood and finished in laminate of approved shade. The internal shelves shall be made in 19mm thick BWR plywood with timber edge lipping duly polished to match the finish. The shutters shall be made in 19mm thick BWR plywood with Teak wood lipping. The external surface shall be finished in 1 mm thick laminate and internal surfaces shall be laminated with 0.8mm thick laminate of approved shade. This also includes providing necessary hardware like handles, hinges, tower bolts/ball catches, locks etc., as per the detail drawings. Note: Storage unit front surface area shall be considered for payment.

Low / Medium Height storages finished with Duco Paint (Overhead & Under Counter Storage)

Providing and fixing Low height storage units of 600mm deep, 750mm high in shape made in 18mm thick HDHMR Board finished with Duco Paint. The internal shelves & Shutters shall be made in 18mm thick HDHMR Board. This also includes providing necessary hardware like handles, hinges, tower bolts/ball catches, locks etc., as per the detail drawings. Note: Storage unit front surface area shall be considered for payment.

Low / Medium Height Wooden Partition

Providing & Fixing low height partition made of 19mm thick Rubber wood Plank fixed on 15x15mm MS Member Frames painted with black emulsion paint. Complete as per details drawings & satisfaction of NHIDCL.

Steel Work

Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer.

Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size).

Painting Work

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.

Two coats

Painting with synthetic enamel paint, having VOC (Volatile Organic Compound) content less than 150 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.

Two or more coats on new work

Melamine polishing on wood work (one or more coat).

False Ceiling Work

Gypsum Board False Ceiling

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the NHIDCL but excluding the cost of painting with :

12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) : 2011 (Board with BIS certification marks)

Gypsum Board Partitions

Providing and fixing partition upto ceiling height consisting of G.I. frame and required board, including providing and fixing of frame work made of special section power pressed/ roll form G.I. sheet with zinc coating of 120 gms/ sqm(both side inclusive), consisting of floor and ceiling channel 50mm wide having equal flanges of 32 mm and 0.50 mm thick, fixed to the floor and ceiling at the spacing of 610 mm centre to centre with dash fastener of 12.5 mm dia meter 50 mm length or suitable anchor fastener or metal screws with nylon plugs and the studs 48 mm wide having one flange of 34 mm and other flange 36 mm and 0.50 mm thick fixed vertically within flanges of floor and ceiling channel and placed at a spacing of 610 mm centre to centre by 6 mm dia bolts and nuts, including fixing of studs along both ends of partition fixed flush to wall with suitable anchor fastener or metal screws with nylon plugs at spacing of 450 mm centre to centre, and fixing of boards to both side of frame work by 25 mm long dry wall screws on studs, floor and ceiling channels at the spacing of 300 mm centre to centre. The boards are to be fixed to the frame work with joints staggered to avoid through cracks, Galvanised M.S. fixing channel of 99 mm width (0.9 mm thick having two flanges of 9.5 mm each with zinc coating of 120 gms/sqm(both side inclusive)) to be provided at the horizontal joints of two boards, fixed to the studs using metal to metal flat head screws, including jointing and finishing to a flush finish with recommended jointing compound, jointing tape, angle beads at corners (25 mm x 25 mm x 0.5 mm), joint finisher and two coats of primer suitable for board as per manufacture's specification and direction of NHIDCL all complete.

75mm overall thickness partition with 12.5 mm thick double skin tapered edged plain Gypsum plaster board conforming : to IS 2095: (part 1) : 1996 (Board with BIS certification marks)

Wooden Ceiling

Providing, fixing & Hanging 25mm x 125mm thick natural matt finish rubber wood wooden planks in ceiling supported from GI hangers with anchor fasteners. Complete as per details drawings & satisfaction of NHIDCL.

Aluminium Door Windows

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sect ions and other sections of approved conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of NHIDCL. (Glazing, paneling and dash fasteners to be paid for separately)

Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron)

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of NHIDCL . (Cost of aluminium snap beading shall be paid in basic item):

With float glass panes of 8 mm thickness (weight not less than 20 kg/ sqm)

Single Glazed Toughened Glass Partition

Supply and Fixing of Single Glass partition of 12mm Toughened Glass using DORMA/JEB Alexa System-45 Frames to a height of maximum 3m or as per drawing.The Fixed glass to be fixed using DORMA/JEB Alexa BP45 Profiles at Top & Bottom & Alexa SP45 at sides. The profile size to be 45x25MM to be fixed on to the floor/wall/ ceiling as per the architect design. DORMA/JEB Alexa H Junction profile to be used at all Glass to Glass vertical joints, 90 Deg L Junction Profiles and T Junction profiles necessary as per design.In case of Glass overall panel Alexa MP45 & BP45 Overpanel Profile to be used.In case of Open glass edges EP45 End Profile to be used. The Alexa profiles shall be suitable for Glass thickness of 12mm.The Profile shall be black anodized, the Profile Manufacturer to supply all the necessary clips, seals and fixing accessories for the system. All Profiles to be with 2 mm Gauge thickness Excluding 20 Micron of Anodizing. Approved Manufacturer: Profiles/Frames: DORMA/JEB/BENE or equivalent with approval of NHIDCL at the time of installation/execution, Glass : Saint Gobain/Asahi or equivalent with approval of NHIDCL at the time of installation/execution.

Single Leaf Swing Door

Supply & Fixing of Glass Door (Single Leaf) of 12mm toughened glass with DORMA/JEB Alexa System-45 frames all around the door. Alexa DP45 Door Profile frame of size 45X50mm with seals with glass door Hinges (3nos) & Locks (1no) in aluminium silver (EV1) finish and Slide Channel Door closer with (as per EN 1154) and saddle plate for fixing on the Glass door and necessary seals to be provided all around the door frames. In case of Glass over panel Alexa OHP-DP45 Over Panel Door profile to be used. The Alexa profiles shall be suitable for Glass thickness of 12mm.The Profile shall be black anodized, the Profile Manufacturer to supply all the necessary clips, seals and fixing accessories for the system. All Profiles to be with 2 mm Gauge thickness Excluding 20 Micron of Anodizing. Approved Manufacturer: Profiles/Frames: DORMA/JEB or equivalent with approval of NHIDCL at the time of installation/execution, Glass : Saint Gobain/Asahi or equivalent with approval of NHIDCL at the time of installation/execution.

Sliding Folding Door

Providing hinged type sliding folding glass partition for size as per drawing - DORMAKABA FSW Set 1 consisting of DORMA FSW system features the following components : track 1, folding panels with rollers, hangers, carrier profiles and top and bottom door rails, end panel with pivot bearing, hinges and top and bottom locks. The system shall be of suspended type with Max. panel sizes of 1000 mm x 3000 mm and panel weight not exceeding 70 kgs. The system shall comprise of maximum 4 sliding folding panels and 1 pass door panel (detailed specification based on the actual dimension).The track shall be affixed to the main structure with suitable accessories after leveling and straightening. Also the longevity and ease of operation depends on the precision and level of track achieved before the partition is installed. These panels are thereafter suspended in the track and checked for smooth operation, parallel horizontal movement. Levels : The bottom of the track level is on the same height as the false/Finished ceiling. Finish : The finish shall be satin stainless steel / silver anodized top/bottom rail with 12 mm thick clear toughened glass.

Conference Hall Table

Providing, fabricating and placing in position 38 Nos. capacity elliptical Conference Hall table of size as per drawings made in 25mm thick rubber wood board finished with natural matt finish & making of 125mm x 700mm Box for wiring. Table Support with 25mm thick commerical board & 19mm thick commerical Board. Complete as per details drawings.

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. (a) For thickness of tiles 10 mm to 25 mm.

Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of NHIDCL.

Pin up Board

Providing and fixing Pin up Board made of 12mm thick cellotex board fixed with wood frame (Size: 25mm x 50mm) treated with anti-termite and fire retardant paint & 6mm thick BWP ply backing covered with fabric fixed to wall with screws surrounded with wood moulding with Pu polishing etc. complete as per design and drawing.

CREDIT

Dismantling of the existing partition work of Aluminium and Glasses etc. The recevied material like Aluminium, Glass and partition boards etc. Shall be the property of the Contractor. (Qouted amount shall be recovered from the agency).

SKJ Enterprises

DV INFRAVATION PVT LTD

INTEGRATED CONSORTIUM PVT LTD