Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Accepted-Technical | Accepted-Technical TECHNICAL QUALIFIED |
| 2 | Accepted-Technical | Accepted-Technical TECHNICAL QUALIFIED |
| 3 | Accepted-Technical 5 361 AWAS VIKAS MAINPURI | MAINPURI | UTTAR PRADESH | 205001 | Accepted-Technical TECHNICAL QUALIFIED |
| 4 | Accepted-Technical | Accepted-Technical TECHNICAL QUALIFIED |
| 5 | Accepted-Technical | Accepted-Technical TECHNICAL QUALIFIED |
Tender Value
₹21.2 L
EMD Value
₹42,340
Closing Date
19 Feb 2026, 5:00 pmClosed
APAR MUKHYA ADHIKARI
ZILA PANCHAYAT VRANASI
GRAM SABHAHATHI SAMUDAIK KENDRA KE PASS ZILA PANCHAYAT DYRA NIRMIT ROAD SE DAYAPUR GAVN KI OR LEPAN NAVNIRMAN KARYA
2026_UPPRD_1113745_12
1239/ZPV/RE/2025-56
Open Tender
Civil Works
ZILA PANCHAYAT VRANASI
Please refer Tender documents.
2 documents required · 2 mandatory
₹2,360
APAR MUKHYA ADHIKARI
₹42,340
11 Mar 2026
9 Feb 2026
20 Feb 2026
9 Feb 2026
19 Feb 2026
9 Feb 2026
Clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per Technical Specification Clause 201.
Construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 with a lead upto 1000 m as per Technical Specification Clause 301.5.
Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401.
Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming,stone screening / binding material to fill-up the interstices of coarse aggregate,watering and compacting to the required density Grading 2 as per technical Specification Clause 405.
Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405.
Construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 with a lead upto 1000 m as per Technical Specification Clause 301.5.
Laying brick soling layar on prepared sub grade with brick on edging according to lines graded and cross section shown on drawing filling joints with sand and earth spreading 25 mm thick layer of earth over brick soling watering and rolling as per Technical Specification Clause 412
Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per Technical Specification Clause 502.
Providing and applying tack coat with Bitumen (VG-10) using Bituman distributor at the rate of 0.35 kg per sqm on the prepared bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503.
Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by(ex.cost of) seal coat of Type C as per Technical Specification Clause 508.
Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type C as per Technical Specification Clause 510.
Supplying and painting of thermo plastic road marking on the painted road surface at centre line and both edges of the road (In divider portin)
Providing and laying reinforced cement concrete pipe NP-3 for culvert on first class bending of granuar material in single row including fixing coller with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry. 350mm NP-3 Hume Pipe
Supply & Fixing Of Inauguration Stone.
Please Enable Macros to View BoQ information
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.83 MB
BOQ_2063590.xls
BOQ • 0.31 MB
Download all tender documents and submit your bid