Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹27.9 LAccepted-AOC | L1 | Accepted-AOC Lowest bidder | |
| 2 | L2₹29.0 L+₹65,250.70 (2.31%)Rejected-Finance | L2 | Rejected-Finance Higher Bid value | |
| 3 | L3₹29.1 L+₹80,108 (2.83%)Rejected-Finance P O WEST SRIPURIA DIST TINSUKIA ASSAM PIN 786 145 | TINSUKIA | ASSAM | 786145 | L3 | Rejected-Finance Higher Bid value | |
| 4 | L4₹29.1 L+₹81,312 (2.87%)Rejected-Finance | L4 | Rejected-Finance Higher Bid value | |
| 5 | L5₹29.5 L+₹1.2 L (4.35%)Rejected-Finance | L5 | Rejected-Finance Higher Bid value |
Tender Value
₹27 L
EMD Value
₹54,000
Closing Date
27 Jun 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE DINJAN
GE DINJAN, PANITOLA (PO), DIBRUGARH (DIST), ASSAM
SPL REPAIRS TO BLDG No. NP-07 AND T-07 (ECHS) AT HQ 73 MTN BDE CAMPUNDER GE DINJAN
2022_MES_527477_1
C/8428/E8
Open Tender
Civil Works
Item Rate
180 days
DINJAN MIL STN
AS PER TENDER DOCUMENT
10 documents required · 10 mandatory
₹500
GE DINJAN
₹54,000
Yes
5 Aug 2022
30 May 2022
29 Jun 2022
30 May 2022
27 Jun 2022
13 Jun 2022
Amount
Dismantling of asbestos cement (corrugated, semi corrugated etc.) sheets in roof coverings with ridges complete all as specified and as directed.
S&F for pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of profile as approved, any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.
S&F for pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridges/valley gutter, fixed with self tapping screws complete all as specified and as directed. Note : Colour of ridge shall be same colour as that of sheet used for roof.
Dismantling timber scantlings 40 Sq.cm and over in section, in any position complete all as specified and as directed.
M&L for second class hardwood, scantlings, wrought, in timber framed work complete all as specified and directed.
Dismantling of timber fillets, rails, posts, rafters, purlins etc under 40 sqcm in section complete all as specified and directed.
S&F for second class hard wood plain fillets, square, rectangular or triangular in section, clean sawn, secured with nails, cross sectional area exceeding 3 Sqcm and not exceeding 6 Sqcm complete all as specified and directed.
S&F for second class hard wood plain fillets, bull nosed, splayed, chamfered or rounded on one edge or face complete all as specified and directed.
M&L for preparation of new wood and wood based surfaces of any description, not otherwise described, not exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.
M&L for preparation of new wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.
M&L for preparation of new painted wood and wood based surfaces of any description, over 10 cm in width or girth, not otherwise described and treated with two coats of creosote oil complete all as specified and as directed.
Demolition of reed, lathing, single or double, including battens and plaster or chicken wire lathing complete all as specified and as directed.
M&L for GI wire netting 0.90mm dia and 12mm mesh lathing to wood or metal studding, joists, etc. in walls, ceilings, stanchions, beams, etc. including all laps, cutting and waste fixed with tinned tacks of wire staples complete all as specified and as directed.
M&L rendering 15 mm thick on one side of lathing in cement mortar (1:6) and finished the surfaces even and smooth without using extra cement as specified and as directed.
M&L rendering 10 mm thick on other side of lathing in cement mortar 1:4 and finished the surfaces even and smooth without using extra cement as specified and as directed.
Taking down cement plaster on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water complete all as specified and as directed
M&L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:6) and finished the surfaces even and smooth without using extra cement complete all as specified and directed.
M&L for rendering 15 mm thick on other than fair faces of brick work or concrete surfaces in cement mortar (1:6) and finished the surfaces even and smooth without using extra cement complete all as specified and directed.
M&L for preparing newly plastered surfaces of walls, etc and applying two coats of distemper oil emulsion over a coat of primer complete all as specified and as directed.
M&L for preparation of newly plastered surface of walls and applying two coats of cement base paint over a coat of alkali resistant cement primer complete all as specified and as directed.
M&L for preparing old distempered surfaces of walls by washing with water rubbing down, stopping, nails holes, filling cracks with putty etc and applying two coats of distemper oil emulsion complete all as specified and directed.
M&L for preparation of old decorated surface of walls by washing with water rubbing down, etc and applying two coats of cement base paint complete all as specified and as directed.
Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) any thickness including cover fillets and frame work any type complete all as specified and as directed.
S&F aluminium Anodised snap grid frame work of size 600mm x 600mm frame work for ceiling with aluminium tee section of size 23.5mm x 26.4mm x 1.4mm thick and aluminium angle section of size 36.5mm x 25mm x 1.4mm thick, for false ceiling including hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia, 40mm long complete all as specified and as directed by the Engr-in-Charge. Make of E-Board: Eternit Everest / lafarge/ Armstrong/Visaka Industries Ltd.
M&L for Non asbestos fibre cement building boards fixed or laid/ inserted to timber/ GI/ aluminium framework with screws complete all as specified and as directed.
M&L for granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry including 15mm thick screed bed or bedding in cement mortar (1:6) and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete complete all as specified and directed.
M&L for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and as directed.
Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc complete all as specified and as directed.
M&L for brick work using locally available first class bricks sub class 'B' bricks (old size brick), straight or curved on plan exc 6 m mean radius, built in cement mortar (1:6) complete all as specified and as directed.
M&L for brick work with sub class 'B' bricks, straight or curved on plan to any radius, built in cement mortar (1:4) as in half brick thick walls complete all as specified and directed.
Demolition of cement concrete (unreinforced) in ground floor and pavings not exceeding 15cm thickness below or above ground level) complete all as specified and as directed.
M&L for 75 mm thick, plain cement concrete (1:3:6) type C-2 (using 40mm graded stone aggregate) as in plinth protection/ hard standing etc, finishing cement concrete surface even and smooth without using extra cement including making joints with bitumastic filing in proportion of bitumen and sand (1:2) complete all as specified and as directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.
M&L for non-skid, ceramic, coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc, including 15 mm thick screed bed in cement mortor (1:6) and set & jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles complete all as specified and directed.
M&L for glazed, ceramic, coloured tiles of size 350mm x 200mm x 7mm thick, on vertical surfaces such as skirting, dados etc, including 10 mm thick backing in cement mortor (1:4) and set & jointed in neat cement slurry & pointed in white or coloured cement to match with the shade of tiles complete all as specified and directed.
M&L for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing with 15mm thick screed bed in cement mortar (1:6) complete all as specified and as directed.
Taking down chowkats or frame,not exceeding 1.5 Sqm in each with shutters (without taking off shutter from the frame) complete all as specified and as directed.
Taking down chowkats or frames, exceeding 1.5 Sqm but not exceeding 4 Sqm in each with shutter (without taking off shutter from the frame) complete all as specified and as directed.
S&F for second class hard wood plain, solid, straight chowkat and frames, wrought, framed, rebated on the solid rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed.
S&F for 35mm thick second class hard wood plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified and as directed, Sizes/section of members of shutters shall be as specified in SSR Part I, Section -8, clause 8.24 (a).
M&L for 35 mm thick, second class hardwood glazed and skeleton shutters open rebated and prepared to receive glass, gauge, etc, (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a).
S&F for 30 mm thick, second class hardwood glazed and skeleton shutters open rebated and prepared to receive glass, gauge, etc, divided in to squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc complete all as specified and as directed in SSR Part- I, Section- 8, clause 8.24 (b).
S&F for 3 mm thick, sheet glass, ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane complete all as specified and as directed.
S&F for galvanised mild steel wire cloth, 0.63 mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanised wire staples including timber bead complete all as specified and as directed.
S&F for 75 mm size, butt hinges, medium weight, cold rolled mild steel complete all as specified and as directed.
S&F for 100 mm size, butt hinges, medium weight, cold rolled mild steel complete all as specified and as directed.
S&F for 150 mm long, aluminium, anodised, barrel tower bolts of extruded section complete all as specified and as directed.
S&F for 100 mm long, aluminium, anodised, barrel tower bolts of extruded section complete all as specified and as directed.
S&F for 150 mm size, aluminium anodised handles, fabricated type complete all as specified and as directed.
S&F for 100 mm size, aluminium anodised handles, fabricated type complete all as specified and as directed.
S&F for 250mm long, aluminium alloy anodised sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy, complete all as specified and as directed.
M&L for plain cement concrete (1:2:4) type B-0 (using12.5mm graded stone aggregate) for embedding holdfast, bed block, cills, etc including necessary form work complete all as specified and as directed.
S&F in repairs vitreous China wash basin, size 630 x 450mm, white, flat back, with CP waste, coupling, chain and plug and porcelean stopper & brackets including cutting for and pinning in ends of brackets but excluding tap complete all as specified and directed.
S&F in repairs stainless steel kitchen sinks with drainage board made of 1 mm thick sheet for kitchen or laboratory with plugs, washers and wastes including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460mm and bowl size 410mm x 330mm x 160mm complete all as specified and directed.
S&F in repairs 15 mm bore, pillar taps, cast copper alloy, with capstan heads, screwed down high pressure, with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed.
S&F in repairs 15 mm bore, stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.
S&F in repairs, 15 mm bore, bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.
S&F in repairs, 15mm bore, PVC connection pipe 450mm long with PTMT nuts at both ends complete all as specified and directed.
S&F in repairs, towel rail, 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden / plastic cleats (Minimum weight 190gms) complete all as specified and directed.
Taking up or down 15 mm bore steel tubing & connections and keeping serviceable pipes in safe custody for reuse in the work complete all as specified and directed.
Taking up or down 20 mm bore steel tubing & connections and keeping serviceable pipes in safe custody for reuse in the work complete all as specified and directed.
S&F 15 mm bore, steel tubes, galvanised, medium grade with all fittings & fixed complete to wall and ceiling or laid in floors etc complete all as specified and directed.
S&F 20 mm bore, steel tubes, galvanised, medium grade with all fittings & fixed complete to wall and ceiling or laid in floors etc complete all as specified and directed.
Dismantling water tanks and removing to store of (exceeding 500 ltr & not exceeding 1000 ltr capacity) complete all as specified and as directed.
S&F for 1000 Ltrs rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and as directed.
S&F 20 mm bore, gun metal, gate valve with iron wheel head, screwed both ends for iron pipes and fixed complete all as specified and directed.
M&L for 75 mm thick, plain cement concrete (1:4:8) type D-2 (using 40 mm graded stone aggregate) as in sub base complete all as specified and directed.
M&L for chequered cement concrete tiles of size 20cm x 20cm x 25mm thick, as in floors etc, including 15mm thick screed bed or bedding in cement mortar (1:6) on laying floor or floor finishes, set & jointed in neat cement slurry and pointed in grey cement and pigments to match with the shade of tiles complete all as specified and directed.
Taking down aluminium/copper point wiring (light, fan, socket or power) including unserviceable light fittings, switch board complete, switch sockets, ceiling roses, pendants, regulators, sockets, etc and removing materials from site and making good disturbed surfaces of walls, floors, etc complete all as specified and directed.
Taking down unserviceable sub-main wiring with rigid steel conduits/PVC casing-caping including cutting chases for conduits and making good disturbed surfaces complete all as specified and directed.
M&L for point wiring with 1.5 Sqmm (nominal area), PVC insulated, multistranded, single core, unsheathed, copper conductor cables, FRLS, drawn through concealed and including PVC conduit 20mm dia with all fittings and accessories (like Tee, bend etc.) complete fixed to walls /ceiling etc. with and including 1.5 Sqmm (nominal area) PVC insulated, unsheathed, stranded, single core, copper cable green in colour as in earth continuity wire connecting to common earth point including steel terminal box made out of 1.2mm thick MS concealed in wall for housing switches, sockets, regulators, etc complete for one light/fan point controlled by one, one way switches complete all as specified and as directed.
All as per item No 72 above but for one 5/6 Amps, 3/5 pin socket outlet on the same board complete all as specified and directed.
All as per item No 72 above but for one 5/6 Amps, 5 pin switch socket combination on Independent board complete all as specified and directed.
All as per item No.72 above but wiring with cables of size 2.5 sqmm & cables of size 2.5 sqmm as continuous earth wire for one 6/16 Amps switch socket combination on Independent board complete all as specified and directed.
M&L for point wiring with three run of 1.5 Sqmm (nominal area), FRLSH PVC insulated, multistranded, single core unsheathed, copper conductor cables, passing through and including PVC casing caping with all fittings and accessories of PVC casing caping (like Tee, bend etc.) complete fixed to walls /ceiling etc. red, black and green in colour as phase neutral and earth continuity wire connecting to common earth point including PVC terminal box (sunken type) switch board fixed with suitable sizes cadmium plated iron screws and washers etc for mounting switches, sockets, regulators etc complete for one light/fan/bell/buzzer point controlled by one ,one way switches complete all as specified and directed.
All as per item No 76 above but for one 5/6 Amps, 3/5 pin socket outlet on the same board with other switches complete all as specified and directed.
All as per item No 76 above but for one 5/6 Amps, 5 pin switch socket combination on Independent board complete all as specified and directed.
All as per item No. 76 above but wiring with cables of size 2.5 sqmm & cables of size 2.5 sqmm as continuous earth wire for one 6/16 Amps switch socket combination on Independent board complete all as specified and directed.
S&F for switch piano, 5/6 Amp single pole, flush type one way 230 volts bearing ISI marked complete all as specified and as directed.
S&F for socket outlet, 2 in 1, 3 pin, 5/6 Amps, flush type bearing ISI marked complete all as specified and directed.
S&F for switch socket combination, 2 in 1, 5/6 Amps, flush type, 240 volts bearing ISI marked complete all as specified and directed.
S&F for switch socket combination, 2 in 1, 6/16 Amps, 240 volts, bearing ISI marked flush type complete all as specified and directed.
S&F for ceiling rose, 3 phase/PVC/polycarbonate, isolated body bearing ISI marked and including PVC box complete all as specified and directed.
S&F for lamp holder PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and as directed.
S&F for LED Lamp 9 Watt complete all as specified and as directed. Make : Havells /Philips/Bajaj /Surya.
S&F in repairs, stepped type, electronic fan regulator, 220 volts, flush type on the existing phenolic laminated sheet, etc complete all as specified and directed. Make : Anchor/Llegrand /Havells.
S&F for 20 Watt surface and wall mounting type LED batten with polycarbonate housing & integrated driver including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed. Make : Havells, Cat No. LUMILINEBS18WLED865SPCWH /Philips/ Bajaj/ CG/ Wipro.
S&F for 60 Watt LED building security light fitting new generation energy saving and environmetal friendly incl with GI bracket of 25mm bore not less than 1 mtr comes with pressure dia cast housing, with high power LED as lighting source and lens embedded PC cover having TOP opening separate driver compartment with IP65 protection and impact resistance of IK07 complete all as specified and as directed. Make : Havells, Cat No. ENDURAPEARLNEOSL60W LED757PASYTOPCAST /Philips/ Bajaj/ CG/ Wipro.
S&F for 10 Watt, LED energy saving new generation bulk head luminaire with opal diffuser including lamp, connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, complete all as specified and as directed. Make : Havells, 10W LED, model No LHEOAOP7UZ6W010 /Philips/Bajaj/CG/Wipro.
M&L for sub main wiring with three run of 10 Sqmm (Nominal area) single core cable PVC insulated, multistranded, unsheathed, copper conductor cables (FRLS), 1100 Volts grade drawn through PVC casing-caping of suitable size, fixed to wall/ceiling etc including one run of 6 Sqmm (nominal area) single core, PVC insulated, multistranded, unsheathed, copper conductor (FRLS) as earth wire and duly connected to common earth point complete all as specified and as directed. Note : (a) PVC Casing-caping, two run wiring cables and one run of earth wire will be measured as one length (b) All incoming and outgoing cable shall be connected by using proper lugs & sockets.
M&L for sub main wiring with three run of 10 Sqmm (Nominal area) single core cable PVC insulated, multistranded, unsheathed, copper conductor cables (FRLS), 1100 Volts grade drawn through PVC conduit of suitable size, fixed to wall/ceiling etc including one run of 6 Sqmm (nominal area) single core, PVC insulated, multistranded, unsheathed, copper conductor (FRLS) as earth wire and duly connected to common earth point complete all as specified and as directed. Note : (a) PVC Casing-caping, two run wiring cables and one run of earth wire will be measured as one length (b) All incoming and outgoing cable shall be connected by using proper lugs & sockets.
Excavating in trenches not exceeding 1.5 mtrs wide and not exceeding 1.5 mtr in depth for taking out/laying of cables, poles etc and getting out in soft/loose soil including taking out old brick/PCC cable cover etc. from cable protection complete all as specified and directed.
Removing excavated material to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and as directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick in soft/loose soil complete all as specified and as directed.
Supply and laying well burnt bricks, sub class 'B' bricks laid breath wise across the length of cable in trenches for protection of UG cables complete all as specified and directed.
M&L for sand cushioning for protection of cable (below, above and around the cable laid in trenches) complete all as specified and directed. Note : Measurement shall be taken after punning down of sand as specified.
Supply and laying cable XLPE insulated screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 16 Sqmm, 2 core including taking out unseviseable cable complete all as specified and directed.
Supply and laying cable XLPE insulated screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 25 Sqmm, 3.5 core including taking out unseviseable cable complete all as specified and directed.
S&F for steel water tubing of size 25 mm bore, galvanised, medium grade with all fittings, laid in trenchesor under road etc including taking out old one complete all as specified and directed.
S&F in repair 32 mm bore, steel tubes, galvanised, light grade with all fittings & fixed for cable protection complete to wall ceilings and pole using suitable clamp/holder bat etc complete all as specified and directed.
S&F for 25 mm bore, gun metal, glob or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.
Taking down unserviceable main switches, DBs, bus bars chambers including all fittings and fixtures such as MCBs, isolator, etc and removing from site complete all as specified and directed.
S&F for factory made board distribution (DB) Double Door in sheet steel enclosure with common bus bar at incomming end, SPN, 8 way, 240 Volts, 200 Amps, suitable for housing MCBs complete all as specified and directed.
S&F for MCB, TPN, 415 Volts, 16 to 32 Amps, "C" series, 10 KA breaking capacity complete all as specified and as directed. Make : L&T/Havells/ABB/Legrand/ Schnider/Siemens/HPL.
S&F for MCB, SPN, 240 Volts, 6 to 32 Amps, 'C' Series, 10KA capacity complete all as specified and as directed. Make : L&T/Havells/ABB/Legrand/ Schnider/Siemens/HPL.
S&F for MCB, 'C' Series, SP, 240 Volts, 6 to 32 Amps, 'C' Series, 10KA capacity complete all as specified and directed. Make : L&T/Havells/ABB/Legrand/ Schnider/Siemens/HPL.
M&L for test point terminal box made of gun metal or phosphorous bronze,size 75x75x25 mm, drilled and screwed and screwed including 03 Nos 8mm dia 25 mm long hexagonal head screwed including removing the existing old unsv one complete all as specified and as directed.
Taking down ceiling fan /ehaust fan and refixing after minor repair such as capacitor, bearing replacement and painting as per existing complete all as specified and as directed.
S&F for ceiling mounted 2'x2' square LED panel light 36 watt complete all as specified and as directed.
M&L for earthing complete with GI earth plate electrode 600 mm x 600mm x 6 mm thick burried directly in ground vertically to a depth not less than 2.25 m below ground level with the top edge of earth plate at depth not less than 1.5 m below ground level connected to galvanised earth lead wire 4.0 mm dia by means of bolts, nuts, check nuts and washers protected by 15mm bore light grade GI pipe, funnel with 20mm bore GI medium grade pipe for watering, wire mesh, including concrete pit in PCC (1:3:6) type C-1, pre-cast RCC 1:2:4 type B-1 cover slab of size 350x350x50mm reinforced with 8mm dia TMT steel bars @15cm centre to centre in both direction and 10mm dia MS handle of suitable size, charcoal or coke and salt in alternative layers,necessary earth work in soft/loose soil all as shown in Electrical Plate No 3 of MES Schedule Part I and testing complete inclduing taking down old one/ dismantling complete all as specified and as directed.
boruah construction
M/S BORAH BROTHERS
M/S HAZARIKA CONSTRUCTION
FREEZCON
M/s GANDHESWAR PHUKAN
M H KHAN
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .