Interior Fit-Out Renovation works at Hostel Block Cafeteria at IIPA, New Delhi

BILL OF QUANTITIES (BOQ)

S.No. Sub-Head DSR Amount (in Rs.) NDSR Amount (in Rs.)

1 CIVIL & INTERIOR WORKS 1,00,05,752.79 67,02,396.97

2 FURNITURE - 34,06,640.00

5 PLUMBING WORKS 3,99,774.00 8,25,162.13

TOTAL i/c GST 2,77,17,556.00

Digitally signed by AMIT

Interior Fit-Out Works at Hostel Block (Cafeteria) at IIPA, New Delhi

Summary of Civil and Interior Works

S.No. Description of Works Amount

Amount (SR, in Rs.)

2 Earth works, Masonry & Plaster

3 Paving, Flooring & Wet Works

4 Partitions & Wall Cladding

7 Finishes & Miscellaneous

GRAND TOTAL (Carried Forward) 1,67,08,149.76

GRAND TOTAL (Carried Forward) 1,67,08,149.76

Digitally signed by AMIT

Interior Fit-Out Works at Hostel Block (Cafeteria) at IIPA, New Delhi

S.No. DSR Ref. No. / MR DESCRIPTION UNIT QTY RATE AMOUNT MARKET RATE AMOUNT

CIVIL & INTERIOR WORKS

1 DISMANTALLING

Demolishing brick work manually / by mechanical means including stacking of serviceable

1.1 15.7 material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50

15.23.2 For thickness of tiles above 25 mm and up to 40 mm SQM 145.00 113.35 16,435.75

Dismantling tile work in Wall dado laid in cement mortar including stacking material within 50

Demolishing R.C.C. work manually / by mechanical means including stacking of steel bars and

disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.

Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material

and disposal of unserviceable material within 50 metres lead.

Dismantling aluminium / Gypsum partitions, doors, windows, fixed glazing and false ceiling

1.6 15.57 including disposal of unserviceable surplus material and stacking of serviceable material with in 50 SQM 785.00 56.35 44,234.75

meters lead as directed by Engineer-in-Charge.

Dismantling of flushing cistern of all types (C.I. /PVC/Vitrous China) including stacking of useful

materials near the site and disposal of unserviceable materials within 50 metres lead.

Dismantling o Wash basins, Urinals, WC including stacking of useful material near the site and

disposal of unservicable materials within 50 metres lead

Surface dressing of the ground including removing vegetation and inequalities not exceeding 15

cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m.

Dismantalling of existing maholes including stacking of useful materials near the site and disposal of

unserviceable materials within 50 metres lead including refilling the excavated gap.

Dismantling of road gully chamber of various sizes including C.I. grating with frame including

1.12 15.51 stacking of useful materials near the site and disposal of unserviceable materials within 50 metres Nos 2.00 958.75 1,917.50

lead including refilling the excavated gap.

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by

mechanical means, including loading, transporting, unloading to approved municipal dumping

ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all

lifts involved.

SUB TOTAL OF DISMANTALLING 3,30,586.80 17,120.34

2 EARTH WORKS, MASONRY AND PLASTER

Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating

and dressing complete.

Providing and laying in position cement concrete of specified grade excluding the cost of

centering and shuttering - All work up to plinth level :

1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate

40 mm nominal size derived from natural sources)

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished

2.3 11.3 with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of

steps etc. complete.

11.3.1 40 mm thick with 20 mm nominal size stone aggregate SQM 20.00 614.20 12,284.00

Digitally signed by AMIT

S.No. DSR Ref. No. / MR DESCRIPTION UNIT QTY RATE AMOUNT MARKET RATE AMOUNT

Providing and applying fibre reinforced elastomeric liquid water proofing membrane with resilient

acrylic polymers having Sun Reflectivity Index (SRI) of 105 on top of concrete roof in three coats

@10.76 litre/ 10 sqm. One coat of self-priming of elastomeric waterproofing liquid (dilution with

2.4 22.22A water in the ratio of 3:1) and two coats of undiluted elastomeric waterproofing liquid (dry film SQM 354.00 563.10 1,99,337.40

thickness of complete application/system not less than 500 microns). The operation shall be carried

out after scrapping and properly cleaning the surface to remove loose particles with wire brushes,

complete in all respect as per the direction of Engineer-in-Charge.

Providing & Applying polymer modified, flexible cementatious negative side waterproofing coating

with elastic waterproofing polymers on interior wall plaster surface in three coats @14.35 kg /10

sqm. one coat of self priming of cementatious waterproofing polymer(dilution with water in the

ratio of 1:1) and two coats of cementatious waterproofing polymer (dilution with water in the ratio

of 3:1 ) after scrapping and properly cleaning the surface to remove pre-existing paint film & loose

particles till plaster is visible, complete in all respect as per the direction of Engineer-in-Charge.

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation

6.1.1 Cement mortar 1:4 (1 cement : 4 coarse sand) cum 15.00 7,370.65 1,10,559.75

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in

superstructure above plinth level up to floor V level in all shapes and sizes in :

6.4.1 Cement mortar 1:4 (1 cement : 4 coarse sand) cum 10.00 9,344.35 93,443.50

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in

superstructure above plinth level up to floor V level.

6.13.2 Cement mortar 1:4 (1 cement :4 coarse sand) SQM 30.00 1,123.80 33,714.00

Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half

3 13.2 CEMENT PLASTER :- 15 mm cement plaster on the rough side of single or half brick wall of mix.

3.1 13.4 12 mm cement plaster of mix

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15°

landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair

cases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement,

with 1:1.5:3 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size).

3.3 5.9 Centering and shuttering including strutting, propping etc. and removal of form for :

2.10 5.9.5 Lintels, beams, plinth beams, girders, bressumers and cantilevers SQM 16.00 736.40 11,782.40

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position

and binding all complete above plinth level.

5.22A.4 Hot rolled deformed bars kg 90.00 107.85 9,706.50

POP PUNNING (12mm-15mm) : Providing and fixing Average 12mm to 15mm thick POP Punning

over cement plaster in line & plumb finished smooth to receive paint. (Internal surfaces of walls).

Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by

applying cement slurry mixed with water proofing cement compound consisting of applying : a)

First layer of slurry of cement @ 0.488 kg /sqm mixed with water proofing cement compound @

0.253 kg/sqm. This layer will be allowed to air cure for 4 hours. b) Second layer of slurry of cement @

0.242 kg/ sqm mixed with water proofing cement compound @ 0.126 kg/ sqm. This layer will be

allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation

of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer

SUB TOTAL OF MASONRY AND PLASTER 14,52,163.70 1,48,342.24

3 PAVING, FLOORING AND WET WORKS

Digitally signed by AMIT

S.No. DSR Ref. No. / MR DESCRIPTION UNIT QTY RATE AMOUNT MARKET RATE AMOUNT

TILE DADO :- Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622

(thickness to be specified by the manufacturer), of approved make, in all colours, shades except

burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of

steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and

jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with

pigment of matching shade complete.

CERAMIC TILE FLOORING :- Providing and laying rectified Glazed Ceramic floor tiles of size 300x300

mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622,

3.2 11.40 of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 SQM 25.00 1,439.40 35,985.00

mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/

sqm including pointing the joints with white cement and matching pigments etc., complete.

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished,

machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of

required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1

cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy

touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc.

complete at all levels.

8.2.2 Granite stone slab colour black, Cherry/Ruby red

Stone tile work for wall lining upto 10 m height with special adhesive over 12 mm thick bed of

3.4 7.38 cement mortar 1:3 (1 cement : 3 coarse sand), including pointing in white cement with an

admixture of pigment to match the stone shade.

7.38.1 8mm thick (mirror polished and machine cut edge)

7.38.1.1 Granite stone of any colour and shade SQM 300.00 3,094.55 9,28,365.00

Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement

3.5 11.26 slurry mixed with pigment to match the shade of the slab, including rubbing and polishing

complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :

Marble stone flooring with 18 mm thick marble stone, as per sample of marble approved by

11.23 Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse

sand) laid and jointed with grey cement slurry, including rubbing and polishing complete with :

11.23.1 Makrana white second quality SQM 500.00 3,737.45 18,68,725.00

11.23.5 Udaipur green marble SQM 150.00 2,428.60 3,64,290.00

Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as

well as curvilinear portions of the building all complete as per the architectural drawings with 18

mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse

sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with

pigment of matching shade including rubbing, curing and polishing etc. all complete as specified

and as directed by the Engineer-in-Charge :

11.55.1 Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. SQM 100.00 3,186.70 3,18,670.00

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as

well as curvilinear portions of the building all complete as per the architectural drawings with 18

mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse

sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with

pigment of matching shade including rubbing , curing and polishing etc. all complete as specified

and as directed by the Engineer-in-Charge.

11.56.1 Polished Granite stone slab of colour Black, Cherry/Ruby Red or equivalent SQM 40.00 4,481.30 1,79,252.00

Digitally signed by AMIT

S.No. DSR Ref. No. / MR DESCRIPTION UNIT QTY RATE AMOUNT MARKET RATE AMOUNT

Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the

manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved

brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement:

3.6 11.41A 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white

cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter

only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness,

leveling system and rubber mallet for placing the tiles gently and easily.

b 11.41A.2 Glazed vitrified floor tiles polished finish of size

Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of

3.7 MR organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including

filling / grouting and finishing complete as per direction of Engineer-in-charge.

Stone tile work for wall lining upto 10 m height with special adhesive over 12 mm thick bed of

7.38 cement mortar 1:3 (1 cement : 3 coarse sand), including pointing in white cement with an

admixture of pigment to match the stone shade.

7.38.1 8 mm thick (mirror polished and machine cut edge)

7.38.1.1 Granite stone of any colour and shade SQM 80.00 3,094.55 2,47,564.00

7.38.1.2 Raj Nagar plain white marble/ Udaipur green marble/ Zebra black marble SQM 90.00 2,766.45 2,48,980.50

KITCHEN/ PANTRY/ HAND WASH COUNTER :- Providing and fixing pantry and toilets with Granite

stone top (with straight edge polished nosing) complete with base cabinet made of 20mm BWP

board, outside surface (shutters) finished in 1mm thick Laminate of approved shade. All internal

3.8 MR surfaces to have balancing laminate. The rate inclusive of necessary hardware, handle lock sets, RMT 18.00 13,543.96 2,43,791.32

self closing hinges, spring loaded shutter, latch inside, all cabinet hardware complete as per

Architects approval. (BR of stone to be taken as Rs 1600/Sqmt). Width of work top counter 600mm/

detailed drawings.

TOTAL FOR PAVING & WET WORKS 54,02,065.75 2,50,771.32

4 PARTITIONS AND WALL CLADDING

Gypsum Panelling:-Providing and fixing, in position concealed G.I. section for wall paneling using

board of required thickness fixed on the ‘W’ profile (0.55 mm thick ) having a knurled web of 51.55

mm and two flanges of 26 mm each with lips of 10.55 mm, placed @ 610 mm C/C in perimeter

channel having one flange of 20 mm and another flange of 30 mm with thickness of 0.55 mm and

4.1 9.133 web of length 27 mm. Perimeter channel is fixed on the floor and the ceiling with the nylon sleeves

@ 610 mm C/C with fully threaded self-tapping dry wall screws. Board is fixed to the ‘W’ profile with

25 mm countersunk ribbed head screws @ 200 mm C/C., all complete as per the drawing &

directions of engineer-incharge, the joints of the boards are finished with specially formulated

jointing compound and 48 mm wide jointing tape to provide seamless finish.

9.133.3 Gypsum board conforming to IS: 2095 Part - I

SHELVES:- Providing and fixing Pre-laminated flat pressed 3 layer (medium density) particle board or

graded wood particle board IS : 3087 marked, with one side decorative and other side balancing

lamination Grade I, Type II exterior grade IS : 12823 marked, in shelves with screws and fittings

wherever required, edges to be painted with polyurethane primer (fittings to be paid separately).

PARTITIONING - Partition using 12mm thick fire retardent plywood fixed on both sides on aluminium

Studs Frame 50mm x 50mm x 1.5mm & 50mm x 50mm x 1.5mm as per approved sample and

MR architectural drawings placing the same 600mm c/c horizontally and vertically. Aluminuim frame SQM 150.00 4,842.96 7,26,443.71

to be fixed to floor and RCC Ceiling using fastners. The cost to include finishing visible edges with

12mm thick mdf strip as per detail drawings.

Digitally signed by AMIT

S.No. DSR Ref. No. / MR DESCRIPTION UNIT QTY RATE AMOUNT MARKET RATE AMOUNT

Providing and fixing of 1.25mm thick high pressure decorative laminates (conforming to applicable

IS:2046-1995, EN 438-3: 2016, NEMA LD3-2005 quality standard), made out of urea free,

thermosetting phenolic resins treated Kraft papers as core material and Amino plastic resin treated

decor papers on the finish surface.

Performance properties of laminates must meet having a minimum density of 1.35g/cm3 and

possess Anti-viral, Anti-Fungal & Antibacterial properties and fulfil the criteria of FSC, Greengard-

Gold, GRIHA & GreenPro certification. Surface of laminates accomplice the properties as per

classification HGS Grade for Resistance to surface wear (350 revolutions), Resistance to cigarette

burns (Rating-Not worse than 3) , Resistance to staining(Rating 5), Resistance to dry heat @180°C

(Rating 4), Resistance to cracking ( >4 rating) & Resistance to scratching(>2.0 N) . Resistance to

Color Change-Xenon Arch Lamp (Rating 5/Index 6).

Color/Decor, size and finish of laminates should be agreed and finalized under direction of the in-

charge. The cost to include pasting over 4 mm thick MDF and fixing on existing surfaces as per

directions of engineer-in-charge.

LAMINATED STORAGE CABINET FOR GENERAL STORAGE- Out of 19mm Commecial Ply Board

finished using 1mm thick laminate. The storage shall be complete with all hinges, drawer glides and

hardware from approved make. All internal surfaces to be completed using balancing laminate.

Including brass D-type handles for shutters and recessed type handles for drawers. Storage to be of

all heights as per design. Storage shutters to be made in solid laminate/ glass as per design and

STORAGE CABINET FOR ELECTRICAL PANEL AND VOLTAGE STABLIZERS- Cabinet Shutters out of 19mm

Commercial Plybaord finished in 1mm Laminate of base cost Rs. 380 per sqmt. Shutters to be fixed

to a frame. Rigidly fixed on both sides and top finshed in laminate. No internal carcass required. All

Hinges of hettich or equivalent. Internal Surface of the shutter in balancing white laminate. All

shutters to be provided with Stainless steel louvers at the top and bottom of the shutter as per the

site requirements and instrcution of the Engineer In charge.

SUB TOTAL OF PARTITIONS AND WALL CLADDING 15,120.25 12,34,968.83

GYPBOARD CEILING :- Providing and fixing false ceiling at all height including providing and fixing

of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc

coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25

mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one

flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other

flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of

required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm

running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick

bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm

centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with

connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including

fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long.

Including jointing and finishing to a flush finish of tapered and square edges of the board with

recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers

covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per

manufacturer's specification and also including the cost of making openings for light fittings, grills,

diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per

drawings, specification and direction of the Engineer in Charge but excluding the cost of painting

a 12.45.1 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- Part I SQM 650.00 1,355.80 8,81,270.00

b 12.45.3 12.5 mm thick tapered edge gypsum moisture resistant board SQM 325.00 1,529.10 4,96,957.50

TRAP DOOR :- Providing and fixing trap door in false ceiling made of "Novapan "pre-laminated

5.2 MR board with hardwood framing, dead locks, lapping all around including all hardware, hinges etc. SQM 5.00 3,005.00 15,025.00

complete as per design and drawing.

Digitally signed by AMIT

S.No. DSR Ref. No. / MR DESCRIPTION UNIT QTY RATE AMOUNT MARKET RATE AMOUNT

CEILING PELMETS :- Providing and fixed pelmet of overall size 150mmx150mm and made hardwood

framings hung from ceiling @1000mm centre to centre with 2 nos of 6mm thk. Commercial ply on

vertical & 12mm thk. Commercial ply on horizontal surface (straight & curved). Inclusive of finishing

GYPSUM BOARD VERTICAL BAND- upto100mm high gypsum band all round the mineral fibre/

gypsum ceiling. In order to make the Mineral Fiber/ gypsum ceiling higher than the Gypsum Ceiling

by upto 100mm as per drawings. (visible surface of gypsum band to not exceed 100mm) including

plastic emulsion paint.

SUB TOTAL OF CEILING 13,78,227.50 71,694.47

6 DOORS/ WINDOWS

STILE DOOR - Providing & Fixing of Stile Door System having size of 75*45 with Door Frame formed

out of 45* 40mm / 50*50mm of 6063-T6 Vargin grade duly Anodized Aluminium, including 10 mm

6.1 MR Toughened Glass. The cost to include hardware like Door Closure, 4nos Hinges, Lever Handle with Nos 14.00 81,607.21 11,42,500.87

mortice lock, Door Seal & Gaskets etc. in approved shade and design as per architectural

drawings and instructions of the architect. The size of door shall be upto 1500mm X 2400mm.

STILE DOOR - Providing & Fixing of Stile Door System having size of 75*45 with Door Frame formed

out of 45* 40mm / 50*50mm of 6063-T6 Vargin grade duly Anodized Aluminium, including 10 mm

6.2 MR Toughened Glass. The cost to include hardware like Door Closure, 4nos Hinges, Lever Handle with Nos 1.00 70,701.88 70,701.88

mortice lock, Door Seal & Gaskets etc. in approved shade and design as per architectural

drawings and instructions of the architect. The size of door shall be upto 1200mm X 2400mm.

STILE DOOR - Providing & Fixing of Stile Door System having size of 75*45 with Door Frame formed

out of 45* 40mm / 50*50mm of 6063-T6 Vargin grade duly Anodized Aluminium, including 10 mm

6.3 MR Toughened Glass. The cost to include hardware like Door Closure, 4nos Hinges, Lever Handle with Nos 1.00 62,033.55 62,033.55

mortice lock, Door Seal & Gaskets etc. in approved shade and design as per architectural

drawings and instructions of the architect. The size of door shall be upto 1050mm X 2400mm.

UPVC Windows : Supply and Fixing of Tripple Track/ Tripple Channel Factory made UPVC

Windows along with DGU/ Sandvich Glasses (6 mm Reflective Glass + 12 mm Air Gap + 6 mm Plain

6.4 MR Toughned Glass) on two tracks and SS Mesh on One Track inclding all required hardware i.e. SQM 55.00 15,500.03 8,52,501.67

handles, locks and other etc., complete as per the requirement of engineer in

DOOR FRAMES- Providing wood work in frames of doors, windows, clerestory windows and other

6.5 9.1 frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required

dia & length ( hold fast lugs or dash fastener shall be paid for separately).

9.1.1 Second class teak wood CUM 0.20 1,42,949.70 28,589.94

FLUSH DOOR:- Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-

decorative type, core of block board construction with frame of 1st class hard wood and well

matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both

faces of shutters :

6.7 9.21.1 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws SQM 42.00 2,392.65 1,00,491.30

Extra for Providing and fixing flush doors with decorative veneering instead of non decorative ISI

marked flush door shutters conforming to IS: 2202 (Part I)

Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of

flush door shutters (over all area of door shutter to be measured)

Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs

and priming coat on unexposed surface etc. complete:

9.40.1 2nd class teak wood

Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter

6.11 9.53 bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix (1 EACH 84.00 228.85 19,223.40

cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size). Digitally signed by AMIT

S.No. DSR Ref. No. / MR DESCRIPTION UNIT QTY RATE AMOUNT MARKET RATE AMOUNT

MORTICE LOCK AND LEVER HANDLES- Providing and installing Tubular Handle TH 123 with Roses &

6.12 MR Escutcheon in SS packaged with Mortice lockset 55mm backset, 20 SS forend, SS strike plate and EP EACH 14.00 3,413.84 47,793.76

Cylinder for all flush doors.

TOWER BOLTS:- Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic AC 10 as

per IS : 1868 ), transparent or dyed to required colour or shade, complete:

DOOR STOPPER:- Providing and fixing bright finished brass hanging type floor door stopper with

necessary screws, etc. complete.

SUB TOTAL OF DOORS 2,60,793.59 21,75,531.73

7 FINISHES & MISCELLANEOUS

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per

manufacturers specifications:

Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special

primer applied @ 0.75 ltr /10 sqm

Steel work welded in built up sections / framed work, including cutting, hoisting, fixing in position

and applying a priming coat of approved steel primer using structural steel etc. as required.

10.25.2 In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works kg 4,500.00 172.60 7,76,700.00

7.4 13.61 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:

13.61.1 Two or more coats on new work SQM 800.00 155.90 1,24,720.00

Providing and fixing 6mm thick poly-carbonate sheet with 40% transparency as per vendor and to

be matched with existing on roof of the attrium including cost of removing of existing roof sheet

and dumping/ storing the same as per instruction of Project in charge, including cost of all

7.5 MR necessary fixing arrangement, framing wherever required complete with all respect as per SQM 85.00 3,882.00 3,29,970.00

manufecturer details and specification and instruction of Project in charge/ Architect. (the cost to

including scaffolding). The cost to include dismantalling of existing roof sheet and disposing it to

nearest duping yard.

Providing & fixing imported decorative Poly décor fabric Wall Paper (on walls and ceiling) of

7.6 MR weight 475 g /sqm as per approved shade & design including prepration of surface with 2 coats SQM 160.00 4,604.65 7,36,744.75

of Nubin Glue based epoxy quote.

FROSTEDFILM(CRYSTALQUALITY):-Providing and fixing scotchcal over glass surface with 15 yrs MCS

warranty as approval of the Architect. (Only film surface area shall be measured and paid).

Preparation of complete set of shop drawings including finishing, MEP services, details, design

calcualtions etc. and any other details as and when desired by Engineer In charge /client. A Percenta

qualified professsional for the purpose shall be appointed after due appproval from Engineer In ge

Digitally signed by AMIT

S.No. DSR Ref. No. / MR DESCRIPTION UNIT QTY RATE AMOUNT MARKET RATE AMOUNT

ZEBRA BLINDS - Providing and fixing of Blinds in band width 7.5 cm - 12 cm and is made up of 100%

polyster, It comes in width of 250 - 280 cm, weight - 160g/sqm - 190g/sqm, thickness - 0.50 mm -

0.70mm ( opaue part ), Colorfastness to light - above 4 grade. Twilight Blind tube is made of

aluminium with a diameter of 36mm, botom rail is made of aluminum with powder coated having

weight 390 gm/meter fitted with end caps in colour matching to the fabric and mechanism is of

plastic with chain and metal bracket. The blind comes with aluminum cover with the matching

fabric designed on it. Aluminium profile should have temper WP consisting of alloy 63400 along with

anodizing of 10 micron and powder coating of 60 micron. The tensile strength of profile should be

9.10 Kg/mm square and elongation 18.The control clutch drive unit engineered heavy duty chain

drive pulley operating system consisting of gear clutch housing and locking plug containing

minimum 6 ribs and inserted at minimum of 38mm into roller tube. It is self-lubricating exclusive

clutch with safety pins for secure bracket installation and unlocking pin for quick manual removal.

Universal clutch is most convenient for large windows down to the smallest windows. It shall be

driven by a ball chain pulley with ball chain and can be positioned at Right hand or Left hand side

of the shade. Clutch gear ratio of 1.75:1 for reduced operating force on larger blinds. Mounting

hardware brackets universal brackets including end plug bracket with lock down retainer device.

Brackets finish of powder coated metal installation brackets made of stamped and hardened

steel. Roller tube circular-shaped aluminium tube extruded from alloy 63400 and temper WP.

Bottom rail flat-shaped extruded aluminium from alloy 63400 and temper WP. Ball chain shall be

2mm diameter cord with plastic balls moulded to form an endless ball chain. It is used for raising or

lowering action of the shades. Plastic parts all plastic components are UV-stable compounds

available white.

Providing and fixing of 4,6 mm thick annealed GRIHA rated lacquered glass manufactured

industrially by curtain coating process with PU lacquer (50 micron thick), opaque (if viewed against

a support wall) conforming to EN 16477 standards for back painted glass , of approved color by

Architect/ Client fixed with compatible Silicone having Shear Bond Strength (Dry, 24 hours), greater

than 450 kpa and tack free time of 10 to 30 mins compatible for installation of mirror and

lacquered glass / Foam based double sided adhesive tape for instantaneous adhesion,

compatible with mirror and lacquered glass having Shear bond strength (Dry, 15 mins) of 250 to 350

7.90 M.R. kpa) on a perfectly leveled 12mm thick water proof marine plywood / MDF / Mineral fibre board sqm 10.00 4,087.28 40,872.79

which is mounted on the RCC wall/any other structure. The contractor should submit test reports for

backpainted glass from manufacturer - High humidity Resistance (conforms to BS EN 1036 1999);

Color fastness ISO 105B02 standard & Mechanical Resistance ISO 7784 ( Taber Abrasion test ) ISO

2409 ( Cross Hatch Test ) standard The manufactured backpainted glass should be environmentally

friendly (no lead, no arsenic, no copper, noformaldehyde); appropriate recycled content (12%

post industrial / 6% post consumer); compressive strenght (1000 MPa) & tensile strenght (40

MPa),same as float glass

Providing & fixing 12mm Thick. 100% Acrylic solid surface of approved make and colour using

approved Adhesive to 12 mm thk. Waterproof Plywood of approved brand as per shape, pattern &

7.10 M.R. details given in the drawing. The rate includes providing & fixing beading, cutting, scaffolding, nails, SQM 70.00 16,300.35 11,41,024.50

all materials, labour, lead, lifts, HOM etc., complete.-for Lift Cladding. (The make, Shade, pattern

etc., to be approved by Architect).

Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C.

top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm

nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone-III) : 8 graded stone

7.11 19.7 aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3

coarse sand) finished with floating coat of neat cement and making channels in cement concrete

1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a

floating coat of neat cement complete as per standard design :

Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm

19.7.1 internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23

kg and weight of frame 15 kg) :

19.7.1.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 each 2.00 11,687.10 23,374.20

Digitally signed by AMIT

S.No. DSR Ref. No. / MR DESCRIPTION UNIT QTY RATE AMOUNT MARKET RATE AMOUNT

Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff

7.12 19.6 mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints

etc. complete :

SUB TOTAL OF FINISHES 11,66,795.20 28,03,968.03

Digitally signed by AMIT

Interior Fit-Out Works at Hostel Block (Cafeteria) at IIPA, New Delhi

BOQ for Furniture Works

Sr. No. Discription Unit Quantity Rate Amount

Supply and placing in place cafe table. The Worktop is made of a 25mm thick

MDF OSR with 12mm thick acrylic solid surface on top side. Understructure: It

should consist of an inner tube assembly with top plate, for worktop mounting, &

an outer tube assembly with round/square bottom plate. The inner and outer tube

asemblies are telescopically connected. The top plate is made of 5mm thk HOT

ROLLED steel plates (HR) (As per IS:2062) & the bottom plate is made of 8mm thk

HOT ROLLED steel plates (HR) ( As per IS: 2062). The inner tube assembly is made of

1 dia 82.5 X 2thk ROUND ELECTRIC RESISTANCE WELDED tubes (ERW) ( AS per IS:7138)

and 8mm thk HOT ROLLED Steel plate (HR) (As per IS:2062) welded together using

tungsten inert gas welding. The outer tube assembly is made of dia 89 X 2.5thk

ROUND ELECTRIC RESISTANCE WELDED tubes (ERW) ( AS per IS:7138) and 8mm thk

HOT ROLLED Steel plate (HR) (As per IS:2062) welded together using tungsten inert

gas welding.The whole structure is EPOXY POLYSTER powder coated (DFT 40-60

microns). The product has a KD construction. It is assembled using alloy steel

hardware( Blackened and coated with rust oreventive oil).

1.2 dining table (6 seater) - 2400 x 800mm each 9.00 72,240.00 6,50,160.00

Supplying, and placing in position of cafe chair. size: (l)381mm x (d)419mm x

(h)839mm (approx.). The seat and back in pvc moulded chair with ss 202 grade

frame round pipe. The colour of chair to be as per selection. The product should

be from manufacturer(OEM) which have BIFMA COMPLIANT Certification/ INDIAN

DESIGN MARK Certification / GREEN PRO Certification/ AIOTA Certification/ BIFMA

LEVEL-1 Certification/ SEDEX Certification/ GRIHA Certification/ FSC Certification

.The product should be as per above given specification under the guidance of

Engineer in charge.

GRAND TOTAL 34,06,640.00

GRAND TOTAL 34,06,640.00

Digitally signed by AMIT

Interior Fit-Out Works at Hostel Block (Cafeteria) at IIPA, New Delhi

BOQ FOR PLUMBING

SECTION DESCRIPTION S.I (AMOUNT) N.S.I (AMOUNT)

A SANITARY FIXTURES & FITTINGS 15,029.30 7,53,262.13

B WATER SUPPLY 2,58,847.30 0.00

C INTERNAL DRAINAGE (SOIL, WASTE & VENT PIPES) 1,25,897.40 71,900.00

Total Cost ( Carried Forward) in Rs. 12,24,936.13

Digitally signed by AMIT

BOQ FOR PLUMBING & FIRE FIGHTING

SUB HEAD A: SANITARY FIXTURES & FITTINGS

SL. NO. DSR - DESCRIPTION OF ITEMS UNIT Qty DSR Rate (Rs.) NS Rate (Rs.) DSR Amount (Rs) NS Amount (Rs)

Supply, installation, testing and commissioning of glazed vitreous china single trap

syphonic pattern having back inlet, supporting chair, wall hung water closet

complete with all internal fittings/ accessories and CP brass flush bend (European

type) water closet with seat and lid, with C.P. brass hinges and rubber buffers,

adapter, rubber joints fixed to W.C., C.P. brass screwed washers including cutting

and making good the walls and floors wherever required and HDPE WC pan

connector including jointing with white cement complete in all respects.

Wall hung W.C. pan (White colour)with white plastic seat & lid "Thermoset moulded

( bakelite ) IS 2548 Part I Each 2 27,825.34 55,650.68

Supply, installation, testing and commissioning of concealed cistern including flush

2 MR plate and all internal fittings/ accessories including cutting and making good the

walls and floors wherever required complete in all respects. Each 2 12,365.33 24,730.67

Supply, installation, testing and commissioning of glazed vitreous china wash basin

with R.S. or C.I. brackets painted white, 32mm C.P. brass waste of standard pattern

3 MR , C.P brass wall flange 32 mm dia. C.P. brass bottle trap and union 32 mm dia C.P.

pipes to wall flange. complete including cutting and making good the walls

wherever required.

Under-counter washbasin Each 20 15,063.73 3,01,274.57

Supply, installation, testing and commissioning of 15mm C.P. brass single hole wash

4 MR basin mixer without popup waste system with 450mm long copper pipes and brass

5 MR Providing & fixing toilet paper holding including cutting and making good the walls. 1,561.92

Providing & fixing Horizontal liquid soap dispenser with stainless steel lid and

brackets fixed to wooden cleats with C.P. brass screws. Each 10 37,147.87

7 MR Providing & fixing C.P. brass coat hooks fixed on toilet door with C.P. brass screws 618.70

Providing & fixing beveled edge mirror 5.5mm thick of superior quality plate glass

complete with 6mm thick marine ply sheet ground fixed to wooden cleats with CP

brass screws and washerswith 40 mm wide teak wood frame as per design

including polishing Sqm 30 2,815.06 84,451.87

Providing & fixing Hand Shower (Health Faucet) with 8mm dia, 1M long PVC tube

9 MR and wall hook CP brass wall flange 1,781.81

Providing & fixing, testing and commissioning of storage type electric water heater

with automatic thermostatic control electric element, pressure release valve,

10 MR brackets fixed to expansion fasteners with M.S. nuts and bolts all complete

including cutting and making good the walls wherever required.

05 litres capacity (Horizontal /Vertical type1.5 kw electrical load). Each 2 11,919.58 23,839.16

Providing & fixing wall mounted 25 mm dia Stainless steel coated grab bar

including cutting & making good the walls(size 450mm long) Each 2 2,082.18

Digitally signed by AMIT

SL. NO. DSR - DESCRIPTION OF ITEMS UNIT Qty DSR Rate (Rs.) NS Rate (Rs.) DSR Amount (Rs) NS Amount (Rs)

Providing & fixing 15 mm dia C.P. brass bib cock with C.P. wall flange of approved

quality. Each 10 15,788.19

FRAGRANCE DISPENSER MACHINE :-Providing and fixing of Automatic Fragrance

13 MR Dispenser machine complete with refill can and 'C' size battery (2 Nos) for

operation fixed to wooden cleats with CP brass screws Each 2 4,623.87 9,247.73

Providing and fixing of stainless steel finish Paper Towel Dispenser having capacity

14 MR of 300-350 paper towels fixed to wooden cleats with C.P. brass screws

Providing and fixing of wall mounted fully automatic hand dryer in SS/ black finish

as per approval complete will all accessories. Each 4

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with

C.I. brackets and stainless steel plug 40 mm, including painting of fittings and

brackets, cutting and making good the walls wherever required :

17.10.1 Kitchen sink with drain board

Supply, installation, testing and commissioning of 15mm C.P. brass single hole sink

mixer complete. Each 2

Detail of Sanitary fixture are for the information of the Contractor,however

i. model/makes of all sanitary fixtures shall be selected by Architect/Interior

designer/Project manager and the same shall be binding for execution.

No additional fixing cost shall be paid for change in type of sanitary fixtures.

Contractor to receive all the above mentioned items & store at place as directed

TOTAL CARRIED OVER TO SUMMARY 15,029.30 7,53,262.13

Digitally signed by AMIT

SUB HEAD B: WATER SUPPLY

SL. DSR Rate DSR Amount NS Amount

DSR /NS DESCRIPTION OF ITEMS UNIT Qty NS Rate (Rs.)

Providing and fixing Chlorinate Polyvinyl Chloride (CPVC) pipes

having thermal stability for hot & cold water supply including all

(CPVC) plain & brass threaded fittings including fixing the pipe

with clamps at 1.00 m spacing. This including jointing of pipes &

fittings with one step CPVC solvent cement and testing of joints

complete as per direction of engineer in charge. .

Internal Work - Exposed on Wall

18.7.5 40 mm nominal outer dia pipes. Metre 40.00 702.95 28,118.00

18.7.6 50 mm nominal outer dia pipes. Metre 80.00 934.15 74,732.00

Providing and fixing Chlorinate Polyvinyl Chloride (CPVC) pipes

having thermal stability for hot & cold water supply including all

CPVC plain & brass threaded fittings i/c fixing the pipe with

2 18.8 clamps at 1.00 m spacing. This including jointing of pipes & fittings

with one step CPVC solvent cement and the cost of cutting

chases and making good the the same including testing of joints

complete as per direction of engineer in charge.

Concealed work including cutting chases and making good the

18.8.2 20 mm nominal outer dia pipes. Metre 80.00 537.60 43,008.00

18.8.3 25 mm nominal dia Pipes Metre 50.00 627.25 31,362.50

18.8.4 32 mm nominal dia Pipes Metre 50.00 736.30 36,815.00

Providing and fixing brass stop cock of approved quality

18.16.1 15 mm nominal bore Each 4.00 353.25 1,413.00

18.16.2 20 mm nominal bore Each 4.00 379.20 1,516.80

Providing and fixing gun metal gate valve with C.I. wheel of

approved quality (screwed end):

18.17.1 25 mm nominal bore Each 6.00 622.40 3,734.40

Digitally signed by AMIT

SL. DSR Rate DSR Amount NS Amount

DSR /NS DESCRIPTION OF ITEMS UNIT Qty NS Rate (Rs.)

18.17.2 32 mm nominal bore Each 6.00 689.95 4,139.70

Providing and fixing C.P. bass angle valve for basin mixer and

5 18.53 geyser points of approved quality conforming to I.S:8931 a) 15

mm nominal bore.

Providing and fixing unplasticised P.V.C connection pipe with

PTMT Nuts coller and bush of approved quality and colour.

18.74.2 15mm nominal bore with 45cm length Each 40.00 121.90 4,876.00

Sub-Total of Water Supply Installation, Separate for Scheduled & Non-Scheduled Items 2,58,847.30

Digitally signed by AMIT

SUB HEAD C: INTERNAL DRAINAGE (SOIL, WASTE & VENT PIPES)

SL. DSR Rate NS Rate NS Amount

DSR /NS DESCRIPTION OF ITEMS UNIT Qty DSR Amount (Rs)

Providing and fixing cast iron trap of self cleansing design with cast

iron screwed down or hinged grating with or without vent arm

complete, including cost of cutting and making good the walls and

100 mm inlet and 100 mm outlet centrifugally cast (spun) iron S&S as

Providing and fixing uPVC RWP pipes 6Kg/cm2 (IS: 4985) including all

fittings (plain or door) e.g. bends, junction, cowls, offsets, access

pieces, jointing with rubber ring/solvent cement joints including cutting

chase or holes in walls floors and making good where required.(for

rain water pipe inside the building)

3 17.35 Providing and fixing soil, waste and vent pipes.

Centrifugally cast (spun) iron S&S pipe as per IS 3989.

17.35.1.2 100mm dia cast (spun) iron S&S pipe Metre 20.00 1,077.40 21,548.00

Centrifugally cast (spun) iron S&S pipe as per IS 3989.

17.35.2.2 75mm dia cast (spun) iron S&S pipe Metre 20.00 1,042.20 20,844.00

Providing and fixing single equal plain junction of reqd. degree with

4 17.43 access door, insertion rubber washer 3mm thick, bolts and nuts

17.43.1.2 Sand cast (spun) iron pipe IS-3989 Each 2.00 731.40 1,462.80

17.43.2.2 Sand cast (spun) iron pipe IS-3989 Each 2.00 573.80 1,147.60

5 17.44 Providing and fixing single equal plain junction of reqd. degree.

Digitally signed by AMIT

SL. DSR Rate NS Rate NS Amount

DSR /NS DESCRIPTION OF ITEMS UNIT Qty DSR Amount (Rs)

17.44.1.2 Sand cast (spun) iron pipe IS-3989 Each 2.00 707.30 1,414.60

17.44.2.2 Sand cast (spun) iron pipe IS-3989 Each 2.00 498.90 997.80

Providing and fixing bend of required degree with access door,

insertion rubber washer 3mm thick, bolts and nuts complete.

17.38.1.2 Sand cast (spun) iron pipe S&S as per IS 3989. Each 2.00 597.60 1,195.20

17.38.2.2 Sand cast (spun) iron pipe S&S as per IS 3989. Each 2.00 453.40 906.80

7 17.39 Providing and fixing bend of required degree .

17.39.1.2 Sand cast (spun) iron pipe S&S as per IS 3989. Each 2.00 439.75 879.50

17.39.2.2 Sand cast (spun) iron pipe S&S as per IS 3989. Each 2.00 298.20 596.40

8 17.57 Providing and fixing collar.

17.57.1.2 Sand cast (spun) iron pipe S&S IS-3989 Each 2.00 439.75 879.50

17.57.2.2 Sand cast (spun) iron pipe S&S IS-3989 Each 2.00 271.45 542.90

Providing and fixing MS holder bat clamps of approved design to cast

iron (spun) pipe embedded in and Including cement concrete blocks

9 17.37 10 x10 x10cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone

aggregate 20mm nominal size) including cost of cutting holes and

making good the walls etc.

Digitally signed by AMIT

SL. DSR Rate NS Rate NS Amount

DSR /NS DESCRIPTION OF ITEMS UNIT Qty DSR Amount (Rs)

Providing and fixing G.I. Pipes complete with G.I. Fittings and clamps.

including cutting and making good the walls etc.

18.10.4 32 mm nominal bore Metre 40.00 563.60 22,544.00

18.10.5 40 mm nominal bore Metre 20.00 725.15 14,503.00

18.10.6 50 mm nominal bore Metre 20.00 893.20 17,864.00

Painting G.I. Pipes and fittings with two coats of anticorrosive

bitumastic paint of approved quality

18.40.4 32 mm nominal bore Metre 40.00 18.40 736.00

18.40.5 40 mm nominal bore Metre 20.00 20.95 419.00

18.40.6 50 mm nominal bore Metre 20.00 25.25 505.00

Painting sand cast iron / centrifugally cast iron( spun) iron soil, waste

and vent pipes and fittings with paint of any colour such as chocolate,

grey or buff etc. over a coat of primer (of approval quality) for new

17.65.1 100mm dia cast (spun) iron S&S pipe Metre 20.00 69.55 1,391.00

17.65.2 75mm dia cast (spun) iron S&S pipe Metre 20.00 52.90 1,058.00

Providing and fixing G.I. Inlet fitting of suitable size with 2 & 3 Nos. G.I.

13 NS Socket 32 & 40 welded G.I. pipe and dipped in hot bitumen complete

in all respect.

100 mm diameter pipe (Hopper ) Each 2.00 1,150.00 2,300.00

Providing lead caulked joints to sand cast iron/centrifugally cast(spun)

iron pipes & fittings of diameter :.

Providing & filling the joints with spun yarn,cement slurry & cement

mortar 1:2(1 cement: 2 fine sand) in SCI/CI pipes.

16 17.48 Providing and fixing single unequal plain junction of reqd. degree.

17.48.1.2 Sand cast (spun) iron pipe IS-3989 Each 2.00 798.80 1,597.60

Digitally signed by AMIT

SL. DSR Rate NS Rate NS Amount

DSR /NS DESCRIPTION OF ITEMS UNIT Qty DSR Amount (Rs)

Sub-Total of Drainage Installation, Separate for Scheduled & Non-Scheduled Items 1,25,897.40 71,900.00

Digitally signed by AMIT

BILL OF QUANTITIES (BOQ) for IIPA, New Delhi

S.NO. SUB HEAD NDSR AMOUNT (Rs.) DSR AMOUNT (Rs.)

1 DISTRIBUTION BOARD Rs. - Rs. 49,842

2 WIRING Rs. - Rs. 6,39,800

3 LIGHTING FIXTURES Rs. 92,196 Rs. 5,65,620

4 FIRE ALARM & PA SYSTEM Rs. - Rs. 7,08,539

GRAND TOTAL Rs. 20,55,997

GRAND TOTAL Rs. 20,55,997

Digitally signed by AMIT

BILL OF QUANTITIES (BOQ) for IIPA, New Delhi

S.No Unit Qty Rate MR Amount DSR Amount

1 DISTRIBUTION BOARD

Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN

MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200

1.1 2.5 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but

without MCBs and incomer ) as required . (Note : Vertical type MCB TPDB is normally used

where 3 phase outlets are required.)

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, “C” curve, miniature circuit

1.2 2.10 breaker suitable for inductive load of following poles in the existing MCB DB complete with

onnections, testing and commissioning etc. as required.

Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual

current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB

complete with connections, testing and commissioning etc. as required.

Total of Main Panel/ DB carried over to summary 0.00 49,842.00

Point wiring for light point /Fan/Exhaust Fan point/ call bell point using 2 runs of 1100 V

grade 1.5 sqmm & one run of 1.5 sq.mm FRLS insulated multistranded copper wires, in &

including 25 mm dia , MS conduit surface/ concealed in wall / ceiling conferming to IS 732

including all accessries such as junction boxes , conduit bends, elbows and ceiling rose ,

and anodised GI switch box with modular switch ,modular plate and the box covered with

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC

4.2 1.7 insulated copper conductor, single core cable in surface/ recessed steel conduit as

a 1.7.1 2x1.5sqmm+1x1.5sqmmearth wire 250.00 327.00 81,750.00

2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire Per

Digitally signed by AMIT

S.No Unit Qty Rate MR Amount DSR Amount

2 X 4 sq. mm + 1 X 4 sq. mm earth wire Per

Wiring for twin control point wiring using 1.5 sqmm copper conductor FRLS PVC insulated

copper conductor cable drawn through 25 dia MS conduit laid in surface/concealed over

4.4 1.4 false ceiling or in slab/wall chases including ,2way modular switches,modular plate ,suitable Per Pts 12.00 1,981.00 23,772.00

GI box and earthing the point with 1.5 sqm FRLS PVC insulated copper conductor single core

cable as required

Supplying and fixing following modular switch/ socket on the existing modular plate & switch

box including connections but excluding modular plate etc. as required.

c 1.24.4 3 pin 5/6 A socket outlet Each 18.00 122.00 2,196.00

d 1.24.5 6 pin 15/16 A socket outlet Each 18.00 197.00 3,546.00

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate

for modular switches in recess etc. as required.

Supplying and fixing following Modular base & cover plate on existing modular metal boxes

etc. as required.

Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE

4.8 1.19 insulated, shielded with fine tinned copper braid and protected with PVC sheath in the Meter 30.00 47.00 1,410.00

existing surface/ recessed steel/ PVC conduit as required.

Supply and fixing of following sizes of MS conduit along with accessories in surface /recess

4.10 1.20 including painting in case of surface conduit,or cutting the wall and making good the same

in case of recessed conduit as required

Total of Wiring carried over to summary 0.00 6,39,800.00

5 LIGHTING FIXTURES

5.1 1.3 LED Down lighter (SMD Type) (System lumen efficacy >135 lm/Watt)

Digitally signed by AMIT

S.No Unit Qty Rate MR Amount DSR Amount

Supplying, installation, Testing & Commissioning of LED Recessed / surface Down lighter

(Round /square/Rectangular) SMD type of following body material with PMMA and

prismatic diffuser and construction as per IS : 10322 with driver as per the requirement with

Driver efficiency >85%, Operating voltage AC 140-270 Volt, freq 50/60 hz, Operating temp

range - 15 deg to 40 deg centigrade, internal surge protection of 2.5 KV with Short & Open

circuit protection ,THD < 10% , P. F.≥0.95, IP20, CRI >80, UGR (Unified Glare Rating) < 19, Flicker

free, (flicker should be below 5 %), life time (LED,Driver & electrical circuitry), life time of

minimum 50000 Burning Hours with , 70% of initial Lumen maintained till life ends as per LM80

extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K / 6000°K /6500°K (As per ANSI

Bin) , SDCM(Standard Deviation Color Matching) <3, Maximum power consumption should

not more than the specified rating and Fixture shall be of relevant BIS standard and trade

mark certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen

printing on housing. OEM must have its own in house NABL lab setup for all testing facilities

for LED fixtures. complete in all respect i/c connections with 1.5 sq mm FRLS, PVC insulated

copper conductor single core cable and earthing etc. as required with Minimum 5 year

OEM warranty. System lumen efficacy >135 lm/Watt output . LM79 & LM80 Test report from

NABL lab for all testing required for LED fixtures as per BIS shall be submitted. Shape size and

CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal

management: heat sink of aluminum housing such that LED junction temperature shall not

rise above 90°C).

Powder coated die cast / Extruded aluminum Body including trim.

5.2 1.8 LED Panel light 2x2 ft., (System lumen efficacy >135 lm/Watt)

Digitally signed by AMIT

S.No Unit Qty Rate MR Amount DSR Amount

Supplying, installation, Testing & Commissioning of Panel light 2x2 ft., of following body

material and construction as per IS : 10322 with driver as per the requirement with Driver

efficiency >85%, Operating voltage AC 140- 270 Volt, freq 50/60 hz, Operating temp range -

15 deg to 40 deg centigrade, internal surge protection of 2.5 KV with Short & Open circuit

protection,THD < 10% , P. F.≥0.95, IP20, CRI >80, UGR (Unified Glare Rating) < 19, Flicker free,

(flicker should be below 5 %), life time (LED,Driver & electrical circuitry), of minimum 50000

Burning Hours with , 70% of initial Lumen maintained till life ends ,CCT 3000°K / 4000°K /

5700°K /6000°K/6500°K (As per ANSI Bin), SDCM(Standard Deviation Color Matching) <3,

Maximum power consumption should not more than the specified rating and Fixture shall be

of relevant BIS standard and trade mark certificate (T.C.). Manufactures Word Mark/ Name

Engraved/ Embossing/ Screen printing on housing. complete in all respect i/c connections

with 1.5 sq mm FRLS, PVC insulated copper conductor single core cable and earthing etc.

as required with Minimum 5 year OEM warranty. System lumen efficacy >135 lm/Watt output

. LM79 & LM80 Test report from NABL lab for all testing required for LED fixtures as per BIS shall

be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per

requirement. (Thermal management: heat sink of aluminum housing such that LED junction

temperature shall not rise above 90°C).

Powder coated die cast / Extruded aluminium Body (Thickness

Providing & Fixing Heavy Duty 4 Blade, 15" Exhuast Fan complete with all hardware and

connectors etc., as per the direction of the engineer In charge

Suppling, installation, testing and commissioning of electrically operated on 220 V, 50 Hz, AC

Supply illuminated exit signage conforming to IS- 10322 for the bank premises ceiling having

the following specifications etc. complete as reqd. (Make:- Prolite Auto Glow, Model

a. Housing extruded aluminum alloy.

b. Diffuser cum message panel-CAD design prnting on 8 mm crystal acrylic sheet.

c. Battery-lithium ion rechargeable battery.

d. Backup time 180 minutes.

e. Charging type - constant current charger.

f. Recharging cycle - 16 to 24 Hours.

Total of Light Fixture carried over to summary 92,196.00 5,65,620.00

Digitally signed by AMIT

Project : JEEVAN TARA BUILDING

ESTIMATED COST FOR FA & PA SYSTEM

A. SITC OF FIRE ALARM SYSTEM & ACCESSORIES : MR. DSR.

Sr. No Description Unit Qty Unit Rate Total amount

Sr. No Description Unit Qty Unit Rate Total amount

2022.No. amount

Supplying, installation, testing and commissioning of micro processor based

intelligent addressable main fire alarm panel, central processing unit with the

following loop modules and capable of supporting not less than 240 devices

(including detectors) and minimum 120 detectors per loop and loop length

up to 2 km, network communication card, minimum 320 character graphics/

LCD display with touch screen or other keypad and minimum 4000 events

history log in the non volatile memory (EPROM), power supply unit (230 ± 5%

V, 50 hz), 48 hrs back-up with 24 volt sealed maintenance free batteries

with automatic charger. The panel shall have facility to connect printer to

printout log and facility to have seamless integration with analog/digital

voice evacuation system (which is part of the schedule of work under SH: PA

System) and shall be complete with all accessories. The panel shall be

compatible for IBMS system with open protocol BACnet/ Modbus over IP

complete as per specifications.

17.2.1.2 Two Loop Control Panel Each 1.00 2,39,225.00 2,39,225.00

Supplying, installation, testing & commissioning of intelligent analog Pcs 31.00 2,858.00

2 17.2.4 addressable photothermal detector complete with mounting base complete 88,598.00

Supplying, installation, testing & commissioning of intelligent addressable Pcs 8.00 2,713.00

3 17.2.9 thermal detector with rate of rise cum fixed tempreature thermistor complete 21,704.00

with base as required.

Supplying, installation, testing & commissioning of addressable manual call Pcs 6.00 3,871.00

point complete as required.

Supplying, installation, testing & commissioning of addressable horn cum strobe Pcs 4.00 3,506.00

complete as required.

Supplying, installation, testing & commissioning of fault isolator complete with Pcs 2.00 3,270.00

base as required.

Supplying, installation, testing & commissioning of response indicator on Pcs 2.00 276.00

7 17.2.5 surface/recessed MS Box having two LED, metallic cover complete with all 552.00

connections etc as required.

B CABLES & ACCESSORIES FOR FAS :

Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated RM 180.00 173.00

with annealed copper conductor having XLPE insulation, steel wire armouring &

FRLS outer sheath complete as required.

C SITC OF PUBLIC ADDRESSABLE SYSTEM & ACCESSORIES :

BOQ - Fire ALarm PA system

Electrical Consultant : DCS Consultant Sons Digitally signed by AMIT

Project : JEEVAN TARA BUILDING

Supplying, installation, testing & commissioning of 6 zone, voice alarm

controller with USB, MP3 player (including 6 zone button paging station)

with seamless integration facility with main fire alarm panel for voice

evacuation complete as required.

Supplying, installation, testing & commissioning of digital audio amplifier 50 Pcs 1.00 96,779.00

1 17.3.6 Watt, 25V rms operating at 240 volt AC supply complete as required. 96,779.00

Supplying, installation, testing & commissioning of ceiling/wall mounted loud Pcs 20.00 2,428.00

2 17.3.4 speaker, 3/1.5 Watt in ABS enclosure complete as required. 48,560.00

D CABLE & ACCESSORIES FOR PA SYSTEM

Supplying and drawing of cable Fire Retardant PVC insulated copper

conductor cable in the existing surface / recessed steel conduit of following

pairs, cores and size including connections and interconnections etc. as

17.5.3.1 speaker cable Single pair, 2-core, 1.5 sqmm RM 120.00 54.00 6,480.00

Supplying and fixing 25 mm dia MS flexible pipe with PVC coating along with all RM 100.00 53.00

2 17.5.4 ancillaries and accessories like coupler etc. as required. 5,300.00

GRAND TOTAL Rs. 7,08,539.00

GRAND TOTAL Rs. 7,08,539.00

BOQ - Fire ALarm PA system

Electrical Consultant : DCS Consultant Sons Digitally signed by AMIT

HVAC Works For IIPA

1.0 VRF/VRV OUTDOOR UNIT Unit Quantity Rate DSR Amount NDSR Amount

Supply, Installation, Testing & Commissioning of Modular type Variable Refrigerant

Flow/Variable Refrigerant Volume air cooled Outdoor units suitable for

cooling/heating having 100% hermetically sealed inverter type twin Rotary/Scroll

Compressor(s),minimum two compressors (with individual separate PCB) for above

14HP modules, microprocessor based Controller, top discharge type condensing

unit(s), with R-410-A Refrigerant or equivalent, vibration Isolators with suitable

foundation etc. complete as required. To have better efficiency condenser fan shall

be capable to operate at different speed with respect to load. The unit shall deliver

the rated capacity and in confirmation as per IS 18728:2024 and CPWD Specifications

and work even at 50°C ambient temperature without tripping. The system shall be

7.3 able to deliver 100% of the rated capacity upto 39 Degree Celcius.The unit shall be

suitable to work on 400V +/- 10%, 3 Phase, 50Hz AC power supply and BMS

compatible. The unit shall be filled with first charge of the refrigerant and ready for

use as required. The condenser should be coated with a hydrophilic film to prevent

water accumulation on the surface of the heat exchanger, enhance water

dispersion, and reduce the risk of degradation, thereby improving overall

performance and durability. The Indian Seasonal Energy Efficiency Ratio (ISEER) of the

unit shall be as per Energy Conservation and Sustainable Building Code (ECSBC) 2024

as below and complete as per CPWD specification, connections, inter connections

etc. as required. (For capacity <40 kWr ISEER 7.4, Capacity > 40 and <70 ISEER 7.5,

Capacity > 70 ISEER 7.6 for Super ECSBC Building)

For Cooling or Heating or Both

2.0 INDOOR UNIT

Supply, Installation, Testing and Commissioning of following minimum capacity 4 way

Cassette Type Indoor ceiling mounted unit equipped with synthetic washable media

pre-filter, fan section with low noise fan / dynamically balanced blower, multispeed

motor, coil section with DX Copper coil, electronic expansion valve, outer cabinet,

drain pump, grill, necessary supports, vibration Isolation, Corded remote control etc.,

7.4 suitable for operation on single phase 230 V ± 10%, 50Hz AC supply, complete, as

required. The Indoor units must shut down upon receiving a singal from the BMS

System/Fire Signals. The system shall be capable to adjust air flow as per room

requirement in auto mode. The cooling capacity of indoor unit will be at air inlet

conditions of 27 Degree C DB and 19 Degree C WB temperature. (Make will be same

3.0 COPPER REFRIGERANT PIPING

Digitally signed by AMIT

Supply, Installation, testing and commissioning including vaccumiazation and

Nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant

piping for VRV/VRF system, complete with fittings, with suitable adjustable ring type

7.14 hanger supports, jointing/brazing including accessories, insulated with XPLE Class-O

tubular insulation/with Class-O closed cell elastometric nitrile rubber tubular sleeves

sections of 19 mm thick insulation as given below for Suction and Liquid lines, all

accessories as per specifications etc. as required :

3.1 7.14.1 6.4 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm Mtr 45.00 256.00 11,520.00

3.2 7.14.2 9.5 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm Mtr 50.00 346.00 17,300.00

3.3 7.14.3 12.7 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm Mtr 120.00 487.00 58,440.00

3.4 7.14.4 15.86 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm Mtr 90.00 615.00 55,350.00

3.5 7.14.5 19 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm Mtr 100.00 739.00 73,900.00

3.6 7.14.6 22.2 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm Mtr 100.00 904.00 90,400.00

3.7 7.14.7 25.4 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm Mtr 85.00 1,068.00 90,780.00

3.8 7.14.8 28.58 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm Mtr 85.00 1,157.00 98,345.00

7.14.9 31.8 mm dia (OD) (Hard drawn) with tube thickness 1.62 mm Mtr 75.00 1,222.00 91,650.00

7.14.10 34.9 mm dia (OD) (Hard drawn) with tube thickness 1.62 mm Mtr 60.00 1,286.00 77,160.00

7.14.11 38.1 mm dia (OD) (Hard drawn) with tube thickness 1.62 mm Mtr 60.00 1,322.00 79,320.00

7.14.12 41.27 mm dia (OD) (Hard drawn) with tube thickness 1.62 mm Mtr 20.00 1,368.00 27,360.00

Supply, Installation, Testing and Commissioning of Y/T/Multi Joints. Joints shall be of

same Original Equipment Manufacturer (OEM) make as of ODUs and IDUs

7.13.2 Outdoor Multi Joint Each 6.00 8,098.00 48,588.00

Supply, installation, testing and commissioning of uPVC Pipe ,complete with fittings,

NDSR supports,U trap arrangement,Clean Plug with 6mm nitrile insulation and accessories

as per specifications, drawings.

Providing and fixing control cum transmission wiring of 2 core x 1.0 sq. mm copper in

suitable conduits between indoor and outdoor unit.

Digitally signed by AMIT