REPAIR BOUNDARY WALL AND REFIXING OF MS GRILL AND PROVIDING CONCERTINA COIL OVER TOP OF MS GRILL AND PROVIDING PATHWAY ALONG THE EXISTING BOUNDARY WALL ON EAST AND WESTERN SIDE OF NORTHERN GATE AT THER MOUND SIRSA, HARYANA

Earth work in excavation by manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources)

Providing of brick on edge flooring with bricks of class designation 7.5 on a bed of 12 mm cement mortar, including filling the joints with same mortar, with common burnt clay non modular bricks: 1:4 (1 cement : 4 coarse sand)

Providing and applying of recess pointing on brick work or brick flooring with cement mortar 1:3 (1 cement : 3 fine sand):

Earth filling by manual means in rough excavation, banking excavated earth in layers not exceeding 20cm in depth, breaking clods, watering, rolling each layer with steel rammers, and rolling every 3rd and top-most layer with power roller of minimum 8 tonnes and filling up ground depressions, lead upto 50 m and for all lift

Providing and fixing of 1st class brick work for foundation in the mortar ratio 1:4 1 cement, 4 coarse sand).

Providing and applying cement plaster in ratio of 1:4 (1 cement: 4 coarse sand)

Providing and applying of painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on work over an under coat of suitable shade with ordinary paint of approved brand and manufacture

Providing and fixing Y-angle post/iron arm of size 50×50×5 mm in position for concertina coil. The item includes cutting, hoisting, placing in line, level, and position, slanting/splitting into 'Y' shape, drilling required holes, and fixing/welding with structural steel posts, boundary walls, or embedded base plates/cleats. The work covers all necessary welding, jointing, grinding smooth, and applying a priming coat of approved steel primer (red oxide/zinc chromate) after thorough surface preparation, complete as per standard specifications, detailed architectural/engineering drawings, and as directed by the Engineer-in-Charge.