REPAIRS AND POLISHING TO WOODEN FURNITURE INCLUDING ALL TYPES OF TABLE AT NAVAL BASE UNDER GE(SB) KARWAR .

Amount

TABLE DINNING 08 PERSONS DRAWING NO: C3/MEC/SP/201/MO/25

(a) M & L for removing unsv top of table by S & F new table top in one piece made out of 18/19mm thick plywood commercial BWP grade ISI marked fixed with 1.5 mm decorative lamination of required shade including 6mm thick teak wood beading made out of 1 st class well seasoned teak wood free from cracks and knots shall be provided all around the top all as shown on drawing and as directed.

(b) M & L for removing unsv long rail of table by S & F new long rail made out of 1 st class well seasoned teak wood free from cracks and knots all as shown on drawing.

(c) M & L for removing unsv leg of table by S & F new leg made out of 1 st class well seasoned teak wood free from cracks and knots all as shown on drawing.

(d) M & L for removing unsv hard rubber shoe of table by S & F new hard rubber shoe of superior quality as per sample approved all as directed.

(e) Preparation of old decorated / new replaced parts /surface of table dinning smoothening by required grade of sand paper and applying one or more coats of french polish to achieve glossy finish including tighting the frame work all as specifed shown in drawing and as directed.

TABLE DINNING 08 PERSONS DRAWING NO: C3/MEC/SP/193

(a) M & L for removing unsv top of table by S & F new table top in one piece made out of 18/19mm thick plywood commercial BWP grade ISI marked fixed with 1.5 mm decorative lamination of required shade including teak wood edging made out of 1 st class well seasoned teak wood free from cracks and knots all around the top all as shown on drawing and as directed .

(b) M & L for removing unsv hard rubber shoe of table by S & F new hard rubber shoe of superior quality as per sample approved all as directed.

(c) Preparation of old decorated / new replaced parts /surface of table dinning smoothening by required grade of sand paper and applying one or more coats of french polish to achieve glossy finish including tighting the frame work all as specifed shown in drawing and as directed.

TABLE DINNING 6 PERSONS DRAWING NO MEC 2913

(a) M & L for removing unsv top of table by S & F new table top in one piece made out of 18/19mm thick plywood commercial BWP grade ISI marked fixed with 1.5 mm decorative lamination of required shade including teak wood edging made out of 1 st class well seasoned teak wood free from cracks and knots duly french polished after preparation of surface shall be provided all around the top all as shown on drawing and as directed .

(b) M & L for removing unsv long rail of table by S & F new long rail made out of 1 st class well seasoned teak wood free from cracks and knots all as shown on drawing.

(c) M & L for removing unsv hard rubber shoe of table by S & F new hard rubber shoe of superior quality as per sample approved all as directed.

(d) Preparation of old decorated / new replaced parts /surface of table dinning smoothening by required grade of sand paper and applying one or more coats of french polish to achieve glossy finish including tighting the frame work all as specifed shown in drawing and as directed.

TABLE DINNING 6 PERSONS (1500 x 900mm) FD/MAP-II/03

(a) M & L for removing unsv top of table by S & F new table top in one piece made out of 18/19mm thick prelaminated particle board exterior grade confirming to IS including teak wood edging 6 mm thick made out of well seasoned teak wood free from cracks and knots duly french polished after preparation of surface shall be provided all around the top all as directed .

(b) M & L for removing unsv stiffener of table by S & F new stiffener made out of 1 st class well seasoned teak wood free from cracks and knots all as shown on drawing.

(c) M & L for removing unsv hard rubber shoe of table by S & F new hard rubber shoe of superior quality as per sample approved all as directed.

(d) Preparation of old decorated / new replaced parts /surface of table dinning smoothening by required grade of sand paper and applying one or more coats of french polish to achieve glossy finish including tighting the frame work all as specifed shown in drawing and as directed.

TABLE DINNING 6 PERSONS 1500 x 900 mm DRAWING NO FD 273

(a) M & L for removing unsv top of table by S & F new table top in one piece made out of 18/19mm thick prelaminated particle board exterior grade confirming to IS including teak wood edging 6 mm thick made out of well seasoned teak wood free from cracks and knots duly french polished after preparation of surface shall be provided all around the top all as directed .

(b) M & L for removing unsv long rail of table by S & F new long rail made out of 1 st class well seasoned teak wood free from cracks and knots all as shown on drawing.

(c) M & L for removing unsv short rail of table by S & F new short rail made out of 1 st class well seasoned teak wood free from cracks and knots all as shown on drawing.

(d) M & L for removing unsv leg of table by S & F new leg made out of 1 st class well seasoned teak wood free from cracks and knots all as shown on drawing.

(e) M & L for removing unsv stiffener of table by S & F new stiffener made out of 1 st class well seasoned teak wood free from cracks and knots all as shown on drawing.

(f) M & L for removing unsv hard rubber shoe of table by S & F new hard rubber shoe of superior quality as per sample approved all as directed.

(g) Preparation of old decorated / new replaced parts /surface of table dinning smoothening by required grade of sand paper and applying one or more coats of french polish to achieve glossy finish including tighting the frame work all as specifed shown in drawing and as directed.

TABLE DINNING 4 PERSONS (1200 x 900mm) DRAWING NO FD/MAP-II/03

(a) M & L for removing unsv top of table by S & F new table top in one piece made out of 18/19mm thick prelaminated particle board exterior grade confirming to IS including teak wood edging 4 mm thick made out of well seasoned teak wood free from cracks and knots duly french polished after preparation of surface shall be provided all around the top all as directed .

(b) M & L for removing unsv long rail of table by S & F new long rail made out of 1 st class well seasoned teak wood free from cracks and knots all as shown on drawing.

(c) M & L for removing unsv short rail of table by S & F new short rail made out of 1 st class well seasoned teak wood free from cracks and knots all as shown on drawing.

(d) M & L for removing unsv hard rubber shoe of table by S & F new hard rubber shoe of superior quality as per sample approved all as directed.

(e) Preparation of old decorated / new replaced parts /surface of table dinning smoothening by required grade of sand paper and applying one or more coats of french polish to achieve glossy finish including tighting the frame work all as specifed shown in drawing and as directed.

TABLE DINNING 04 PERSONS DRAWING NO MEC 178, MEC 179

(a) M & L for removing unsv top of table by S & F new table top in one piece made out of 18/19mm thick plywood commercial BWP grade ISI marked fixed with 1.5 mm decorative lamination of required shade including teak wood edging made out of 1 st class well seasoned teak wood free from cracks and knots duly french polished after preparation of surface shall be provided all around the top all as shown on drawing and as directed .

(b) M & L for removing unsv long rail of table by S & F new long rail made out of 1 st class well seasoned teak wood free from cracks and knots all as shown on drawing.

(c) M & L for removing unsv leg of table by S & F new leg out of 1 st class well seasoned teak wood free from cracks and knots all as shown on drawing.

(d) M & L for removing unsv hard rubber shoe of table by S & F new hard rubber shoe of superior quality as per sample approved all as directed.

(e) Preparation of old decorated / new replaced parts /surface of table dinning smoothening by required grade of sand paper and applying one or more coats of french polish to achieve glossy finish including tighting the frame work all as specifed shown in drawing and as directed.

TABLE DINNING 1200 x 900 DRAWING NO FD 273

(a) M & L for removing unsv top of table by S & F new table top in one piece made out of 18/19mm thick prelaminated particle board exterior grade confirming to including teak wood edging 6 mm thick made out of well seasoned teak wood free from cracks and knots duly french polished after preparation of surface shall be provided all around the top all as directed .

(b) M & L for removing unsv hard rubber shoe of table by S & F new hard rubber shoe of superior quality as per sample approved all as directed.

(c) Preparation of old decorated / new replaced parts /surface of table dinning smoothening by required grade of sand paper and applying one or more coats of french polish to achieve glossy finish including tighting the frame work all as specifed shown in drawing and as directed.

TABLE PEG DRAWING NO C3/MEC/SP/202/MO/14

(a) M & L for removing unsv top of table by S & F new table top in one piece made out of 18/19 mm thick plywood commercial BWP grade ISI marked fixed with 1.5 mm thick decorative lamination including well seasoned teak wood edging 6 mm thick free from cracks and knots duly french polished after preparation of surface shall be provided all around the top all as directed and as shown on drawing.

(b) M & L for removing unsv long rail of table by S & F new long rail made out of 1 st class well seasoned teak wood free from cracks and knots all as shown on drawing.

(c) M & L for removing unsv short rail of table by S & F new short rail made out of 1 st class well seasoned teak wood free from cracks and knots all as shown on drawing.

(d) M & L for removing unsv leg of table by S & F new leg made out of 1 st class well seasoned teak wood free from cracks and knots all as shown on drawing.

(e) M & L for removing unsv hard rubber shoe of table by S & F new hard rubber shoe of superior quality as per sample approved all as directed.

(f) Preparation of old decorated / new replaced parts /surface of table peg smoothening by required grade of sand paper and applying one or more coats of french polish to achieve glossy finish including tighting the frame work all as specifed shown in drawing and as directed.

TABLE PEG DRAWING NO FD 384

(a) M & L for removing unsv top of table by S & F new top made out of 18/19 mm thick pre laminated particle board one side white and other side decorative choice lamination exterior grade including well seasoned teak wood edging 4 mm thick free from cracks and knots duly french polished after preparation of surface shall be provided all around the top all as directed and as shown on drawing.

(b) M & L for removing unsv long rail of table by S & F new long rail made out of 1 st class well seasoned teak wood free from cracks and knots all as shown on drawing.

(c) M & L for removing unsv leg of table by S & F new leg out of 1 st class well seasoned teak wood free from cracks and knots all as shown on drawing.

(d) M & L for removing unsv stiffener of table by S & F new stiffener made out of 1 st class well seasoned teak wood free from cracks and knots all as shown on drawing.

(e) M & L for removing unsv hard rubber shoe of table by S & F new hard rubber shoe of superior quality as per sample approved all as directed.

(f) Preparation of old decorated / new replaced parts /surface of table peg smoothening by required grade of sand paper and applying one or more coats of french polish to achieve glossy finish including tighting the frame work all as specifed shown in drawing and as directed.

TABLE WRITING DRAWING NO FD 275

(a) M & L for removing unsv top of table by S & F new top made out of 18/19 mm thick pre laminated particle board one side white and other side decorative choice lamination exterior grade including well seasoned teak wood edging free from cracks and knots shall be provided all around the top all as directed and as shown on drawing.

(b) M & L for removing unsv door shutter of table by S & F door shutter made out of 18/19 mm thick pre laminated particle board exterior grade ISI marked of required shade including well seasoned teak wood edging 4 mm thick free from cracks and knots duly french polished after preparation of surface shall be provided all around the top all as directed and as shown on drawing.

(c) M & L for removing unsv hinges of table by S & F new CP piano type hinges of superior all as shown on drawing (as per sample).

(d) M & L for removing unsv long rail of table by S & F new long rail made out of 1 st class well seasoned teak wood free from cracks and knots all as shown on drawing.

(e) M & L for removing unsv stiffener of table by S & F new stiffener made out of 1 st class well seasoned teak wood free from cracks and knots all as shown on drawing.

(f) M & L for removing unsv hard rubber shoe of table by S & F new hard rubber shoe of superior quality as per sample approved all as directed.

(g) M & L for removing unsv CP knob/Handle of table by S & F new Handle SS 75mm (as per sample) of superior quality as per sample approved all as directed.

(h) M & L for removing unsv drawer table by S & F new drawer including Handle SS 75mm (as per sample) of superior quality all as shown on drawing and as specified.

(j) Preparation of old decorated / new replaced parts /surface of table writing smoothening by required grade of sand paper and applying one or more coats of french polish to achieve glossy finish including tighting the frame work all as specifed shown in drawing and as directed.

TABLE WITH DRAWER 90 x 60 x 76 CM DRAWING NO MEC 176

(a) M & L for removing unsv top of table by S & F new table top in one piece made out of 18/19 mm thick plywood commercial BWP grade ISI marked duly fixed with 1.5 mm thick decorative lamination of required shade including well seasoned teak wood edging 6 mm thick free from cracks and knots shall be provided all around the top all as directed and as shown on drawing.

(b) M & L for removing unsv long rail of table by S & F new long rail made out of 1 st class well seasoned teak wood free from cracks and knots all as shown on drawing.

(c) M & L for removing unsv short rail of table by S & F new short rail made out of 1 st class well seasoned teak wood free from cracks and knots all as shown on drawing.

(d) M & L for removing unsv leg of table by S & F new leg out of 1 st class well seasoned teak wood free from cracks and knots all as shown on drawing.

(e) M & L for removing unsv CP knob/Handle from table by S & F new CP Knob of superior quality as per sample approved all as shown on drawing and as specified.

(f) M & L for removing unsv stiffener of table by S & F new stiffener made out of 1 st class well seasoned teak wood free from cracks and knots all as shown on drawing.

(g) M & L for removing unsv hinges of shutter of table by S & F new CP piano type hinges of superior quality as per sample approved all as directed.

(h) M & L for removing unsv hard rubber shoe of table by S & F new hard rubber shoe of superior quality as per sample approved all as directed.

(j) M & L for removing unsv back ply of table by S & F new back ply in one piece made out of 6 mm thick plywood commercial BWP grade ISI marked all as shown on drawing.

(k) Preparation of old decorated / new replaced parts /surface of table with drawer smoothening by required grade of sand paper and applying one or more coats of french polish to achieve glossy finish including tighting the frame work all as specifed shown in drawing and as directed.

TABLE DRESSING GENTS DRAWING NO MEC 173

(a) M & L for removing unsv back mirror plywood of table by S & F new back made out of 6 mm thick commercial plywood BWP grade ISI marked as as shown on drawing.

(b) M & L for removing unsv frame by S & F new frame made out of 1 st class well seasoned teak wood free from cracks and knots all as specified and as shown on drawing.

(c) M & L for removing unsv beading from mirror by S & F new beading made out of 1 st class well seasoned teak wood free from cracks and knots all as specified and as shown on drawing.

(d) M&L for removing of unsv old looking mirror by S & F new sheet glass electro-copper plated mirror 5mm thick all as specified and as shown on drawing.

(e) M & L for removing unsv drawer of table by S & F new drawer made out of 12 mm thick commercial plywood BWP grade & bottom ply 6mm thick including CP Knob of superior quality all as per shown on drawing and as specified.

(f) M & L for removing unsv sliding glass of table by S & F new plain glass 5 mm thick of superior quality all as per shown on drawing and as specified.

(g) M & L for removing unsv CP knob/Handle of table by S & F new CP Knob of superior quality as per sample approved all as directed.

(h) Preparation of old decorated / new replaced parts /surface of table dressing gents smoothening by required grade of sand paper and applying one or more coats of french polish to achieve glossy finish including tighting the frame work all as specifed shown in drawing and as directed.

TABLE DRESSING GENTS DRAWING NO C3/MEC/SP/203/MO/26

(a) M&L for removing of unsv old mirror of table by S & F new sheet glass electro-copper plated mirror 5mm thick indlidung all as specified and as shown on drawing.

(b) M & L for removing unsv back plywood from mirror of table by S & F new back made out of 6 mm thick commercial plywood BWP grade ISI marked as as shown on drawing.

(c) M & L for removing unsv drawer table by S & F new drawer made out of 12 mm thick commercial plywood BWP grade including CP Knob (as per sample) of superior quality all as per shown on drawing and as specified.

(d) M & L for removing unsv CP knob of table by S & F new CP Knob (as per sample) of superior quality as per sample approved all as directed.

(e) Preparation of old decorated / new replaced parts /surface of table dressing gents smoothening by required grade of sand paper and applying one or more coats of french polish to achieve glossy finish including tighting the frame work all as specifed shown in drawing and as directed.

DRESSING MIRROR GENTS DRAWING NO FD/E6/MAP/16

(a) M&L for removing of unsv mirror of table by S & F new sheet glass electro-copper plated mirror 5mm thick all as shown on drawing.

(b) M & L for removing unsv back plywood of frame by S & F new back made out of 12 mm thick commercial plywood BWP grade ISI marked as as shown on drawing.

(c) M & L for removing unsv glass shelves with glass holder of table by S & F new 5 mm thick plain glass of superior quality with glass holder all as specified and as directed.

(d) M & L for removing unsv hinges of table by S & F new CP piano type hinges of superior quality all as shown on drawing and as specified.

(e) M & L for removing unsv magnetic catcher by S & F new magnatic catcher of superior quality as per sample approved all as shown on drawing and as specified.

(f) Preparation of old decorated / new replaced parts /surface of dressing mirror gents smoothening by required grade of sand paper and applying one or more coats of french polish to achieve glossy finish including tighting the frame work all as specifed shown in drawing and as directed.

TEAPOY DRAWING NO FD 382

(a) M & L for removing unsv top of teapoy by S & F new top made out of 18/19 mm thick pre laminated particle board one side white and other side decorative choice lamination exterior grade including well seasoned teak wood edging 6 mm thick free from cracks and knots duly french polished after preparation of surface shall be provided all around the top all as directed and as shown on drawing.

(b) M & L for removing unsv stiffener of teapoy by S & F new stiffener made out of 1 st class well seasoned teak wood free from cracks and knots all as shown on drawing.

(c) M & L for removing unsv leg of table by S & F new leg out of 1 st class well seasoned teak wood free from cracks and knots all as shown on drawing.

(d) M & L for removing unsv hard rubber shoe of teapoy by S & F new hard rubber shoe of superior quality as per sample approved all as directed.

(e) Preparation of old decorated / new replaced parts /surface of teapoy smoothening by required grade of sand paper and applying one or more coats of french polish to achieve glossy finish including tighting the frame work all as specifed shown in drawing and as directed.

TEAPOY DRAWING NO C3/MO/SP/202/MO/29

(a) M & L for removing unsv top of teapoy by S & F new top made out of 18/19 mm thick pre laminated particle board one side white and other side decorative choice lamination exterior grade including well seasoned teak wood edging 6 mm thick free from cracks and knots duly french polished after preparation of surface shall be provided all around the top all as directed and as shown on drawing.

(b) M & L for removing unsv top long rail of table by S & F new top long rail made out of 1 st class well seasoned teak wood free from cracks and knots all as shown on drawing.

(c) M & L for removing unsv leg of table by S & F new leg out of 1 st class well seasoned teak wood free from cracks and knots all as shown on drawing.

(d) M & L for removing unsv hard rubber shoe of table by S & F new hard rubber shoe of superior quality as per sample approved all as directed.

(e) Preparation of old decorated / new replaced parts /surface of teapoy smoothening by required grade of sand paper and applying one or more coats of french polish to achieve glossy finish including tighting the frame work all as specifed shown in drawing and as directed.

TABLE CENTRE DRAWING NO FD 274

(a) M & L for removing unsv top of table by S & F new table top in one piece made out of 18/19mm thick prelaminated particle board of required shade exterior grade confirming to IS including teak wood edging 6 mm thick made out of 1 st class well seasoned teak wood free from cracks and knots duly french polished after preparation of surface shall be provided all around the top all as shown on drawing and as directed .

(b) M & L for removing unsv stiffener of table by S & F new stiffener made out of 1 st class well seasoned teak wood free from cracks and knots all as shown on drawing.

(c) M & L for removing unsv hard rubber shoe of table by S & F new hard rubber shoe of superior quality as per sample approved all as directed.

(d) Preparation of old decorated / new replaced parts /surface of table centre smoothening by required grade of sand paper and applying one or more coats of french polish to achieve glossy finish including tighting the frame work all as specifed shown in drawing and as directed.

TABLE CENTRE WITH GLASS TOP 2 TIER DRAWING NO MEC 2911

(a) M & L for removing unsv glass top of table by S & F new 8mm thick Black glass top all as shown on drawing.

(b) M & L for removing unsv leg of table by S & F new leg made out of 1 st class well seasoned teak wood free from cracks and knots all as shown on drawing.

(c) M & L for removing unsv long stiffener of table by S & F new long stiffener made out of 1 st class well seasoned teak wood free from cracks and knots all as shown on drawing.

(d) M & L for removing unsv short stiffener of table by S & F new short stiffener made out of 1 st class well seasoned teak wood free from cracks and knots all as shown on drawing.

(e) M & L for removing unsv hard rubber shoe of table by S & F new hard rubber shoe of superior quality as per sample approved all as directed.

(f) Preparation of old decorated / new replaced parts /surface of table centre smoothening by required grade of sand paper and applying one or more coats of french polish to achieve glossy finish including tighting the frame work all as specifed shown in drawing and as directed.

TABLE CENTRE DRAWING NO C3/MEC/202/MO/24

(a) M & L for removing unsv glass top of table by S & F new 8mm thick plain glass top all as shown on drawing.

(b) M & L for removing unsv top of table by S & F new table top in one piece made out of 18/19mm thick plywood BWP grade confirming to IS all as shown on drawing and as directed.

(c) M & L for removing unsv hard rubber shoe of table by S & F new hard rubber shoe of superior quality as per sample approved all as directed.

(d) Preparation of old decorated / new replaced parts /surface of table centre smoothening by required grade of sand paper and applying one or more coats of french polish to achieve glossy finish including tighting the frame work all as specifed shown in drawing and as directed.

TABLE CENTRE DRAWING NO MEC 177

(a) M & L for removing unsv top of table by S & F new table top in one piece made out of 18/19mm thick plywood commercial BWP grade ISI marked fixed with 1.5 mm decorative lamination of required shade including teak wood edging 6 mm thick made out of 1 st class well seasoned teak wood free from cracks and knots duly french polished after preparation of surface shall be provided all around the top all as shown on drawing and as directed .

(b) M & L for removing unsv long rail of table by S & F new long rail made out of 1 st class well seasoned teak wood free from cracks and knots all as shown on drawing.

(c) M & L for removing unsv short rail of table by S & F new short rail made out of 1 st class well seasoned teak wood free from cracks and knots all as shown on drawing.

(d) M & L for removing unsv leg of table by S & F new leg made out of 1 st class well seasoned teak wood free from cracks and knots all as shown on drawing.

(e) M & L for removing unsv hard rubber shoe of table by S & F new hard rubber shoe of superior quality as per sample approved all as directed.

(f) Preparation of old decorated / new replaced parts /surface of table centre smoothening by required grade of sand paper and applying one or more coats of french polish to achieve glossy finish including tighting the frame work all as specifed shown in drawing and as directed.

PEG SET OF TWO,THREE,FOUR & SIX DRAWING NO C3/MEC/SP/205, MEC 2908 FD 80M, MEC 173, MEC 2908 MEC 182, MEC 192 MEC 182

(a) M & L for removing unsv peg hook by S & F new Aluminium (125x75mm) peg hook of superior quality with screw as per sample approved all as specified and as directed.

(b) M & L for removing unsv key plate by S & F new key plates (as per sample) to its existing position all as shown on drawing as approved by Engr-in-charge.

(a) Peg set of three (Drg No:C3/MEC/SP/205,MEC 2908): Preparation of old decorated / new replaced parts /surface of peg set of three smoothening by required grade of sand paper and applying one or more coats of french polish to achieve glossy finish including tighting the frame work all as specifed shown in drawing and as directed.

(a) Peg set of six (Drg No:FD 80M,MEC 173,MEC 2908): Preparation of old decorated / new replaced parts /surface of peg set of six smoothening by required grade of sand paper and applying one or more coats of french polish to achieve glossy finish including tighting the frame work all as specifed shown in drawing and as directed.

(a) Peg set of two (Drg No:MEC 182): Preparation of old decorated / new replaced parts /surface of peg set of two smoothening by required grade of sand paper and applying one or more coats of french polish to achieve glossy finish including tighting the frame work all as specifed shown in drawing and as directed.

(a) Peg set of four (Drg No:MEC 192, MEC 182): Preparation of old decorated / new replaced parts /surface of peg set of four smoothening by required grade of sand paper and applying one or more coats of french polish to achieve glossy finish including tighting the frame work all as specifed shown in drawing and as directed.

SOFA SET, (1+1+3),(2+3)(1), DRAWING NO C3/MEC/SP/205, C3/MEC/SP/202-02, C3 / MEC / SP / 200/MO-19A

(a) M&L removing Old unserviceable cushion of sofa seat/back and S & F cushion (40 density) of size and thickness as per sample held at BSO Office. All as per Drg and as directed by Engineer-in-Charge. Note : Single cushion seat/ back shall be measured as one unit.

(b) M&L removing old faded Tapestry cloth from seat/back cushion of sofa (single/two/three seater) by S &F new tapestry cloth of best quality not less than Rs 384/- per metre with a zip as per sample held with BSO Office. Size as per Drg and all as specified by Engineer-in-Charge.Colour&Pattern of Tapestry Cloth will be as directed by Engineer-in-Charge. Note : Tapestry cloth for single seat/back shall be measured as one unit.

(c) Preparation of old decorated / new replaced parts /surface of sofa set five seater smoothening by required grade of sand paper and applying one or more coats of french polish to achieve glossy finish including tightening the frame work all as specified shown in drawing and as directed.

SOFA SET FOUR /FIVE SEATER DRAWING NO FD 373, FD-281

(a) M&L removing Old unserviceable cushion of sofa seat/back and S&F New 100mm thick cushion (cool foam) 40 density size as per Drg and all as specified and as directed. Note : Single cushion seat/ back shall be measured as one unit.

(b) M&L removing old faded Tapestry cloth from seat/back cushion of sofa Set and S &F new tapestry cloth of best quality not less than Rs 384/- per metre with a zip for easy removal as per sample held with BSO.Size all as per Drg and as directed. Colour&Pattern of Tapestry Cloth will be as directed by Engineer-in-Charge. Note : Tapestry cloth for single seat/back shall be measured as one unit.

(c) Preparation of old decorated / new replaced parts /surface of sofa set five/four seater smoothening by required grade of sand paper and applying one or more coats of french polish to achieve glossy finish including tightening the frame work all as specified shown in drawing and as directed.

SOFA SET FOUR/FIVE SEATER DRAWING NO FD/MAP-II/02

(a) M&L removing Old unserviceable cushion of sofa seat/back and S&F New 100mm thick cushion (cool foam) 40 density all as specifed shown in drawing and as directed. . Note : Single cushion seat/ back shall be measured as one unit.

(b) M&L removing old faded Tapestry cloth from seat/back cushion of sofa Set and S & F new tapestry cloth of best quality not less than Rs 384/- per metre with a zip for easy removal as per sample held with BSO. all as specifed shown in drawing and as directed. Colour&Pattern of Tapestry Cloth will be as directed by Engineer-in-Charge. Note : Tapestry cloth for single seat/back shall be measured as one unit.

(c) Preparation of old decorated / new replaced parts /surface of sofa set five/four seater smoothening by required grade of sand paper and applying one or more coats of french polish to achieve glossy finish including tightening the frame work all as specified shown in drawing and as directed.

SOFA SINGLE SEATER (SPL DESIGN) C3/MEC/SP/ 200/MO-19A

(a) M&L removing Old faded tapestry cloth from cushion of sofa Single seater and S & F new tapestry cloth of best quality not less than Rs. 750/- per metre as per approved sample for complete sofa Single seater as per required size/shape complete all as specifed shown in drawing and as directed. Colour&Pattern of Tapestry Cloth will be as directed by Engineer-in-Charge.

(b) Preparation of old decorated / new replaced parts /surface of sofa single seater smoothing by required grade of sand paper and applying one or more coats of french polish to achieve glossy finish including tighting the frame work all as specifed shown in drawing and as directed.

SOFA TWO SEATER (SPL DESIGN) DRAWING NO C3/MEC/SP/ 200/MO-19A

(a) M&L removing Old faded tapestry cloth from cushion of sofa Two seater and S & F new tapestry cloth of best quality not less than Rs. 750/- per metre as per approved sample for complete sofa Two Seater as per required size/shape complete all as specifed shown in drawing and as directed. Colour&Pattern of Tapestry Cloth will be as directed by Engineer-in-Charge.

(b) Preparation of old decorated / new replaced parts /surface of sofa Two seater smoothing by required grade of sand paper and applying one or more coats of french polish to achieve glossy finish including tighting the frame work all as specifed shown in drawing and as directed.

SOFA THREE SEATER (SPL DESIGN) DRAWING NO C3/MEC/SP/ 200/MO-19A

(a) M&L removing Old faded tapestry cloth from cushion of sofa set three seater and S & F new tapestry cloth of best quality not less than Rs. 750/- per metre as per approved sample for complete sofa three seater as per required size/shape complete all as specifed shown in drawing and as directed. Colour&Pattern of Tapestry Cloth will be as directed by Engineer-in-Charge.

(b) Preparation of old decorated / new replaced parts /surface of sofa Three seater smoothing by required grade of sand paper and applying one or more coats of french polish to achieve glossy finish including tighting the frame work all as specifed shown in drawing and as directed.

BED BOX TYPE DRAWING NO C3/MEC/SP/175

(a) M & L for removing unsv plywood top of bed and S & F new top made out of 12 mm thick plywood commercial BWP grade ISI marked of size 838x965mm all as directed and as shown on drawing.

(b) M & L for removing unsv plywood front and back of head board of bed and S & F new 32 mm thick block board ISI marked (770 x 900mm) duly fixed with 1mm thick decorative lamination teak veneer finished Front Side (300 x 900) & Back side (750 x 900) all as shown on drawing and as directed.

(c) M & L for removing unsv plywood front and back of foot board of bed and S & F new block board ISI marked (470 x 900mm) duly fixed with 1mm thick decorative lamination teak veneer finish outer side (470 x 900) and inner side (75x900) all as shown on drawing and as directed.

(d) M & L for removing unsv side rail plywood of bed by S & F new side rail made out of 9 mm thick plywood commercial BWP grade ISI marked duly fixed with 1.5mm thick decorative lamination teak veneer finished including 1st class teak support free from knots and cracks shall be provided all as shown on drawing and as directed.

(e) M & L for removing unsv bottom plywood of bed by S & F new bottom made out of 9 mm thick plywood commercial BWP grade ISI marked all as shown on drawing.

(f) M & L for removing unsv stiffener by S & F new stiffener made out of II nd class Hard wood all as directed and as shown on drawing.

(g) M & L for removing unsv PVC hard shoes from bed by S & F new PVC rubber shoe of superior quality as per sample approved.

(h) Preparation of old decorated / new replaced parts /surface of bed box type smoothening by required grade of sand paper and applying one or more coats of french polish to achieve glossy finish including tightening the frame work all as specified shown in drawing and as directed.

BED BOX TYPE DRAWING NO MEC 174

(a) M & L for removing unsv plywood top of bed and S & F new top made out of 12 mm thick plywood commercial BWP grade ISI marked of size 838x965mm all as directed and as shown on drawing.

(b) M & L for removing unsv head board of bed by S & F new Head board made out of Block Board 32mm duly fixed with 1mm thick decorative lamination teak veneer finished(Both side) including 1st class teak wood beading free from knots and cracks shall be providedall all as shown on drawing and as directed.

(c) M & L for removing unsv foot board of bed by S & F new Foot Board made out of Block Board 32mm duly fixed with 1mm thick decorative lamination teak veneer finished(Both side) including 1st class teak wood beading free from knots and cracks shall be providedall all as shown on drawing and as directed.

(d) M & L for removing unsv side rail plywood of bed by S & F new side rail made out of 9 mm thick plywood commercial BWP grade ISI marked duly fixed with 1mm thick decorative lamination teak veneer finished ISI marked including 1st class teakwood support free from knots and cracks shall be provided all as shown on drawing and as directed.

(e) M & L for removing unsv bottom plywood of bed by S & F new bottom made out of 9 mm thick plywood commercial BWP grade ISI marked all as shown on drawing.

(f) M & L for removing unsv stiffener by S & F new stiffener made out of II nd class Hard wood all as directed and as shown on drawing.

(g) M & L for removing unsv PVC hard shoes from bed by S & F new PVC rubber shoe of superior quality as per sample approved.

(h) Preparation of old decorated / new replaced parts /surface of bed box type smoothening by required grade of sand paper and applying one or more coats of french polish to achieve glossy finish including tightening the frame work all as specified shown in drawing and as directed.

BED WITH PLY BOARD DRAWING NO MEC 175

(a) M & L for removing unsv plywood top of bed by S & F new top made out of 12 mm thick plywood commercial BWP grade ISI marked all as shown on drawing.

(b) M & L for removing unsv centre stiffener of bed by S & F new stiffenner dove tailed made out of 1 st class teak wood free from cracks and konts all as shown on drawing and as directed.

(c) M & L for removing unsv PVC hard shoes from bed by S & F new PVC rubber shoe of superior quality as per sample approved.

(d) Preparation of old decorated / new replaced parts /surface of bed with ply board smoothening by required grade of sand paper and applying one or more coats of french polish to achieve glossy finish including tightening the frame work all as specified shown in drawing and as directed.

BED WITH PLY BOARD DRAWING NO MEC 185

(a) M & L for removing unsv plywood top of bed by S & F new top made out of 12 mm thick plywood commercial BWP grade ISI marked all as shown on drawing.

(b) M & L for removing unsv stiffener by S & F new stiffener made out of II nd class Hard wood all as directed and as shown on drawing.

(c) M & L for removing unsv PVC hard shoes from bed by S & F new PVC rubber shoe of superior quality as per sample approved.

(d) Preparation of old decorated / new replaced parts /surface of bed with ply top smoothening by required grade of sand paper and applying one or more coats of french polish to achieve glossy finish including tightening the frame work all as specified shown in drawing and as directed.

(a) Bed hard box type,Table computer,Table dinning,Table peg,Side board,Book case,Table 90x60 with drawer,Table dressing gents,Table dressing ladies,TV/VCR Cabinet, Stool dressing,Table writing, Teapoy,Drg No C3 /MEC/ SP/175 ,C3/MEC/SP/199/SO/15,C3/MEC/SP/201/MO/25,MEC/180,C3/MEC/SP/194/6/7, C3/ MEC/ SP/ 180 / MO /6/C3/MEC/SP/177/MO/21&28, MEC/ 177 / C3 / MEC / SP /203 /MO/26,C3/MEC/SP/203/MO/27, MEC/ 181, C3/MEC/SP/205,MEC/181) M&L for removing the unserviceable/broken laminated sheet 1 mm thick and S & F new laminated sheet 1 mm thick with approved adeshive complete all as specified and directed.

(a) Dressing stool (Drg No C3/MEC/SP/205) M & L for removing unsv cushioned seat of stool by S & F new 50mm thick cushioned of 32 density covered with tapestry cloth superior quality as per sample approved shall be provided all as shown on drawing and as specified.

HAT STAND WITH MIRROR DRAWING NO FD 233 (M)

(a) M&L for removing old unsv mirror with frame by S & F new 5mm thick electro-copper plated mirror of including 1 st class well seasoned teak wood beading free from cracks and knots all as shown on drawing and as specified.

(b) M&L removing old unsv brass pegs from frame by S & F brass pegs of superior quality of size 120 x 75 mm with brass screw as per sample approved all as specified and as directed.

(c) Preparation of old decorated / new replaced parts /surface of hat stand with mirror smoothening by required grade of sand paper and applying one or more coats of french polish to achieve glossy finish including tighting the frame work all as specifed shown in drawing and as directed.

TV VCR CABINET DRAWING NO MEC 176

(a) M & L for removing unsv castor wheel of cabinet by S & F new castor wheel of superior quality as per sample approved all as shown on drawing and as directed.

(b) M & L for removing unsv back ply of cabinet by S & F new back ply made out of 6 mm thick plywood commercial BWP grade ISI marked all as shown on drawing and as specified.

(c) Preparation of old decorated / new replaced parts /surface of TV VCR cabinet smoothening by required grade of sand paper and applying one or more coats of french polish to achieve glossy finish including tighting the frame work all as specifed shown in drawing and as directed.

STOOL DRESSING DRAWING NO FD/E6/MAP/14

(a) M & L for removing unsv cushion from seat of stool by S & F new 50mm thick cushioned of 32 density covered with Tapestry cloth as per sample approved shall be provided all as shown on drawing and as specified.

(b) M & L for removing unsv plywood seat of stool including by S & F new 12 mm thick BWP grade commercial plywood ISI marked all as shown on drawing and as specified.

(c) M & L for removing unsv hard rubber shoe of stool by S & F new hard rubber shoe of superior quality as per sample approved all as directed.

(d) Preparation of old decorated / new replaced parts /surface of stool dressing smoothening by required grade of sand paper and applying one or more coats of french polish to achieve glossy finish including tighting the frame work all as specifed shown in drawing and as directed.

BINLINEN MULTIPURPOSE DRAWING NO FD-1104

(a) M & L for removing unsv back particle board of Binlinen Multipurpose by S & F new back made out of 18/19mm thick prelaminated particle board of make as per sample approved and rest all as shown on drawing and as specified.

(b) M & L for removing unsv Handle of Binlinen Multipurpose by S & F new Handle SS 75mm (as per sample) of superior quality as per sample approved all as directed.

BOOKSHELF DRAWING NO MEC 180

(a) M & L for removing unsv back ply of bookshelf by S & F new back made out of 6 mm thick plywood BWP of make as per sample approved and rest all as shown on drawing and as specified.

(b) M & L for removing unsv lower shelf by S & F new lower shelf in one piece made out of 18/19 mm thick plywood commercial BWP grade ISI marked including well seasoned teak wood edging 6 mm thick free from cracks and knots alongwith fixing of 18x18mm teakwood batten patti for support shall be provided all as directed and as shown on drawing.

Mahesh Traders

SAIRAM INDUSTRIES