PROVN OF BATHROOM CUM TOILET LADIES AND GENTS BEHIND MAIN OFFICE AT 41 VEH COY AND TFF SHED AT 222 ABOD UNDER GE NARANGI

Amount

Surface dressing n exc 15 cm deep in soft / loose soil and getting out exceeding 50 Mtr in soil complete all as specified and directed.

Surface excavation n.exc 30cm deep & averaging 15cm deep & getting out in soft/loose soil complete all as specified and directed.

Excavating over areas not exceeding 1.5 metre deep and getting out in soft/loose soil complete all as specified and directed.

Excavation in trenches, n.exc 1.5 m wide and n.exc 1.5 m in depth for laying of cable , etc. n.exc 10 Sqm on plan and n.exc 1.5m in depth and getting out in soft/loose soil complete all as specified and as directed.

Excavation in trenches n.exc 1.5m wide and depth exceeding 1.5 m and not exceeding 3.00m beyond first 1.50m and getting out in soft / loose soil etc complete all as specified and as directed.

Excavating in post holes (or similar holes) each not exceeding 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50m and making good surfaces in soft/loose soil complete all as specified & as directed.

Returning filling in including spreading, levelling, watering and well ramming in layers n.exc. 25cm thick complete all as specified and directed.

Removing excavated soil n exc 50 mtr distance and depositing at level not exc 1.5 mtr above the starting point.

Material and labour for hard core with broken stone or boulder of gauge not exc 63 mm, deposited , spread and levelled in layers not exc 10 cm thick, watered and rammed to a true surfaces complete all as specified and as directed

Material and labour for moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed.

Material and labour for PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete etc. complete all as specified and directed.

Material and labour for RCC (1:1.5:3) type B1 ( using 20mm gradrd stone aggregate) in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs complete all as specified and directed.

Material and labour for RCC (1:1.5:3) type B1 ( using 20mm gradrd stone aggregate) in Column filling complete all as specified and directed.

Material and labour for RCC (1:1.5:3) type B1 ( using 20mm gradrd stone aggregate) in beam,cantilevers, lintels complete all as specified and directed.

Material and labour for RCC (1:1.5:3) type B1 ( using 20mm gradrd stone aggregate) in Chajja filling complete all as specified and directed.

Material and labour for RCC (1:1.5:3) type B1 (using 20mm graded stone aggregate) slabs supported on walls,beams and columns in floors,roofs, landings, balconies,canopies, deck slabs and in shelves and the like complete all as specified and directed

Material and labour for Precast RCC 1:2:4, type B-1 (using 20mm graded stone aggregate) as in manhole cover slabs, of any thickness, size or shape including necessary form work, finished concrete surfaces even & fair in cement mortar complete all as specified and directed.

Material and labour for PCC 1:2:4, type B1 (using 20 mm graded stone aggregate) as in coping, cills, block for fixing hold fasts, fixing of post, water trough etc. including necessary formwork (straight or curved) complete all as specified and as directed.

Material and labour for 100mm thick PCC (1:4:8) type D2 (using 40mm graded stone aggregate) as in sub base in floor/hard standing etc complete all as specified and as directed.

Material and labour for 75 mm thick PCC 1:4:8, type D2 (using 40mm graded stone aggregate) as in sub base, floor etc. complete all as specified and directed.

Material and labour for 25 mm thick PCC (1:2:4) type B0 (12.5 mm graded aggregate) in floor for leveling course complete all as specified and directed.

Material and labour for 75 mm thick, PCC 1:3:6, type C2 (using 40 mm graded stone aggregate) as in plinth protection, etc finished the surface even and smooth without using extra cement including provision of joint of size 10 mm wide and 30 mm deep at every 2.4 mtrs interval filled with sealing compound grade 'A' etc complete all as specified and as direted.

Use and waste formwork to sides of concrete foundations, footing, bases of columns, plinth beams for rough finished surfaces of concrete complete all as specified and as directed.

Use and waste formwork to sides of pillars, posts, struts, piers, columns and stanchions for fair finished flat surfaces of concrete complete all as specified and as directed.

Use and waste formwork to sides and soffits of floor or roof beams, beams haunchings, girders, bressumers, lintels over 1.5m clear span, cantilevers, shelves including supports overhangs etc also splays between floors and beams etc. for fair finished flat surfaces of concrete complete all as specified and as directed.

Material and labour for formwork to soffits of chullah hoods, chajjas, troughs and simlar items including edges complete all as specified as directed.

Use and waste formwork to soffits and sides of suspended slabs such as roof slabs, floor slabs, landings , floors, roofs, landings, balconies etc., n exc 200 mm thick (horizontal or sloping) for fair finished surface of concrete complete all as specified and as directed.

Material and labour for Use and waste of formwork in curve to edges of concrete, sides of RCC/PCC bands in walls, horizontal or sloping, and similar work, complete all as specified and as directed.

Material and labour for coloured non-skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, laid in floors,shelves etc. over and including 15 mm thick screed bed in cement motar 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles, complete all as specified and as directed.

Material and labour for glazed ceramic tiles of size 450 mm x 350 mm x 7 mm thick, coloured/printed, on vertical surfaces, set, jointed in net cement slurry and pointed in white cement mixed with colour pigments to match the colour of tiles, over and including 10 mm thick rendering in cement mortar 1:4 complete all as specified and as directed.

Material and labour for pre-polished cement concrete chequered tiles area of each tiles exc 0.06 Sqm but n exc 0.11 Sqm and 25 mm thick with white cement and pigments of approved make jointed with cement slurry and pointed with white cement mixed with pigment to match with the tiles over and including screed bed of 20 mm thick in cement mortar (1:4) complete all as specified and directed.

Material and labour machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over and including 15 mm thick screed in cement mortar (1:4) complete all as specified and directed.

Material and labour for mild steel TMT bars 10 mm dia and over cut to length, bent to shape as required including cutting, bending cranking, hooking end and binding with mild steel wire(annealed) not less than 0.9mm dia as in reinforcement bar complete all as specified and as directed

Material and labour for mild steel TMT bars 5 mm dia and over upto and including 10mm dia cut to length, bent to shape required including cutting, cranking, hooking ends and binding with mild steel wire (annealed) not less than 0.90mm dia as in stirrups, spacers and binders complete all as specified and as directed

Material and labour for brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and as directed

Material and labour for brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and as directed

Material and labour for brickwork with Sub-Class ‘B’ Bricks (Old Size Bricks) in One brick thick walls honey comb walling, built in cement mortar 1:4, complete all as specified and as directed.

Material and labour for 15 mm thick rendering in cement mortar 1:6 on brick or concrete surfaces on wall finished even & smooth without using extra cement complete all as specified and as directed

Material and labour for rendering 10 mm thick on brick walls in CM 1:6 finished even and smooth wiithout using extra cement all as specified and as directed.

Material and labour for rendering 5mm thick on concrete surface of chajjas, ceiling in CM 1:3 finished even and smooth wiithout using extra cement all as specified and as directed.

Material and labour for rendering 15mm thick external in CM 1:4 on fair faces of brick/concrete surfaces finished even and smooth without using exta cement with using WPC @200ml/50kg the wt of cement. WPC shall be measured and paid seperately.

Supply only approved integral water proofing compound.

Material and labour for preparation of new plaster surface of wall and applying 2 coats of acrylic distemper over 1mm thick wall care putty on wall and over a coat of primer complete all as specified and as directed

Material and labour for preparation of newly plastered surface of walls and applying two coats of exterior emulsion weather coat paint over one coat of primer with approved tint as per manufacturer's instructions,complete all as specified and as directed.

Material and labour for preparation newly plastered surface and applying two coat of exterior emulsion weather resistant/weather shield paint with primer on over & including a coat of 1mm thick putty concrete/plaster surfaces etc. (as in external surfaces of wall) complete all as specified and directed.

Material and labour preparation of newly plastered surfaces of walls etc., and applying three coats of white wash complete all as specified

Supply and fix steel windows or ventilators, fixed type, with glazing bars complete all as specified and as directed

Supply and fix box type steel windows with side hung shutters both mosquito proof and glazed shutter including projecting type hinges with steel handle and steel peg stay with glazing bars and 12 mm square bar or ground bar of approved design welded to steel window frame dovetailed or welded complete all as specified and as directed.

Supply and fix solid PVC door frame of size 50mm x 47mm made out of 5mm single side prelam PVC sheet reinforced with MS tube in opening as per specification and shown in drg in SSR Part -II 2020

Supply and fix factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS Tube for top & bottom rails MS Frame shall be covered with heat moulded plain colour PVC C channel having a PVC sheet strip of 20mm thick width struck inside with solvent cement for stiles & plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail panelling of plain colour PVC sheet to be fitted in the MS frame welded sealed to the stiles & rails with suitable PVC sheet beading & joined together with solvent cement supplied & fixed in the frame at site as per specifications and drawing and as directed by Engr-in-Charge

Supply and fix 100 mm long aluminium anodized barrel tower bolt of extruded section complete all as specified and directed

Supply and fix 100 mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed

Supply and fix 100mm size butt hinges, medium weight, cold rolled mild steel complete all as specified and directed.

Supply and fix looking mirror 5.0mm thick of size 450x600mm, fixed with chromium plated brass spacers 25mm to 30mm in size (One Each Corner) including rounding the edges of the mirror and complete all as specified and as directed.

Supply & fixed frosted glass 4 mm thick ordinery quality and glazing with oil putty in sqaure n exc 0.50 sq. m in each pane complete all as specified and directed.

Supply and fix rotational moulded,multilayer HDPE water storage tank of 1000 ltrs capacity(Cylindrical vertical with closed top) ISI marked fixed in position on existing places complete all as specified including 02 Nos 20mm dia full threaded GI tank niple, 20 mm dia PTMT float valve epoxy coated Aluminium rod with high density plastic float ball( of minium weight 210 gms) and complete all as specified and as directed.

Material and labour for 40mm thick damp proof course 1:2:4 type B-0 and applying evenly a tack coat of blown bitumen 85/25 @ 1.20 kg per sqm including laying 150 micron thick polythene film complete all as specified as directed

Supply and fix stop valves/ angular stop valve, 15mm dia, cast copper alloy, fancy type, chromium plated, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or unions complete all as specified and as directed.

Supply and fix gun metal globe/gate valve 20mm bore (dia) with Iron wheel head, screwed both ends for Iron pipe and complete all as specified and as directed.

Supply and fix gun metal globe/gate valve 25mm bore (dia) with Iron wheel head, screwed both ends for Iron pipe and complete all as specified and as directed.

Supply and fix vitreous china wash down water closet pan ( pedestal pattern) white including connection in drain and in flushing pipe complete including 'P' or 'S' trap complete all as specified and as directed.

Supply and fix plastic water closet seat cover, black or white, closed pattern with flat bottom, and cover including mild steel chromium plated or aluminised hinging device complete all as specified and as directed

Supply and fix vitreous china wash down water closet of "Orissa" pattern size 580 x 440 mm white with integral foot rests including removing filled lean concrete from sunken portion and putting of lean concrete after treatment of sunken slab, connection to trap and to flushing pipe etc complete and making good to floor complete all as specified and directed.

Supply and fix hand shower (health faucet) CP brass with 8 mm dia, 1 m long flexible long tube & wall hook complete all as specified and diretced.

Supply and fix GI tubing medium grade 15mm dia with all fittings, cutting, threading and fixing to walls or fixing in concealed walls or in floors etc. and making good the surfaces matching to existing surfaces of walls/floor complete all as specified and diretced.

Supply and fix GI tubing medium grade 20 mm dia with all fittings, cutting, threading and fixing to walls or fixing in concealed walls or in floors etc. and making good the surfaces matching to existing surfaces of walls/floor complete all as specified and diretced.

Supply and fix GI tubing 25 mm bore, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.

Cutting existing steel tubing 40mm dia for alterations ( Each cut measured) complete all as specified and as directed.

Supply and fix 10 Litres capacity, PVC valveless syphonic action type, flushing cistern, low level, white or coloured, with inlet, ball valve, float and handle including bracket swith 32mm dia PVC pipe 600 mm long etc complete all as specified and as directed

Supply and fix PVC connection 450mm long and15 mm dia with brass fly nut at both ends complete all as specified and as directed

Supply and fix 15mm bore, bib taps, fancy type cast copper alloy chromium plated screwed down for iron pipe for brass ferrule and fixed complete all as specified and as directed

Supply and fix vitreous china wash basin white flat back size 550 mm x 400mm including all fittings including cutting for and pinning in ends of brackets or erecting stand etc complete (waste coupling 32mm bore CP, 32mm bore PVC waste pipe, cast iron brackets etc shall be deemed to be included in the quoted rate) complete all as specified and directed.

Supply and fix 15mm bore, pillar taps, fancy type cast copper alloy chromium plated screwed down for iron pipe for brass ferrule and fixed complete all as specified and directed.

Supply and fix towel ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms) complete all as specified and directed.

Supply and fix urinal spreader of PTMT any colour for fixing with 15 mm dia pipe complete all as specified and directed.

Supply and fix fancy type soap dish chromium plated fixed to wall with chromium plated brass screws and plastic cleats complete all as specified and as directed

Supply and fix PVC floor trap 75mm bore (dia) with grating including jointing to waste pipe fixed in cement concrete 1:2:4 (12.5 mm graded stone aggregate) complete all as specified and as directed.

Supply and fix PVC (SWR) 110mm bore pipes single socketed, in any length with rubber ring joints, laid in tranches or in floors including haunching complete all as specified and as directed.

PVC (SWR) junction single (single T), equal or unequal, 110 mm bore, provided with access door complete all as specified and as directed.

Supply and fix PVC (SWR) 110mm bore bend, any radius.

Supply and fix PVC (SWR) 110mm bore pipes single socketed, in any length with rubber ring joints, laid in tranches or in wall complete all as specified and as directed.

Supply and fix PVC (SWR) 75mm bore (dia) Soil, Waste and Ventilating Pipe, single socketed, in any length with PVC Joints, with or without Ears, laid in floors, and fixed-in-repairs complete all as specified and as directed.

Material and labour Concrete bed to drain pipe 150mm dia incl. packing under and haunching against the sides of pipe PCC 1:4:8 type D2 complete all as specified and as directed.

Supply and fix Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour as directed having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

Supply and fix Pre- painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridges, hips, valley gutters, eave board fixed with self tapping screw as specified and directed.

Material and labour for rolled mild steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S. 1161-1998 grade St.-240 complete all as specified and as directed.

Supply and fix rolled mild steel plates ( plain or chequrred) channels, 5mm thick or over square cut or notched ( ordinary or counter sunk) forming holes, without any attachment confirming to Fe-410-W (Gde-E-250) quality A complete all as specified & as directed.

Material and labour for rolled sections as in framing for cladding, glazing and the like fixed with angle cleats and connecting plates, etc completed all as specified and directed.

Material and labour for preparation of new or previsously untreated steel surfaces of any description over 10cm width or girth and applying two coat of synthetic enamel paint over one coat of red oxide completed all as specified and directed.

Material and labour for suspended false ceiling using E-grid 2430, 180 GSM (exposed ceiling suspension system ) of grid size 600mmx600mm x 4mm thick with main runner 34 mm x 24 mm, 0.7mm thick, cross runner 24mm x 24mm 0.7mm thick and wall angle 24mm x 24mm with GI powder coating at bottom of runner and wall angle in a grid of GI system duly suspended with 3mm dia GI wire fixed with steel dash fasteners or iron purline from the roof with adjustment clip providing positions for light fixtures,air conditioning diffuser and ducts ,sprinkler ,smoke detectors etc.The main runners to be secured to structural soffits by hanger @ 1220 mm maximum c/c. the last hanger at the end of each main runner should not be placed at more than 450mm from the adjucent wall,Flush fitting 1220 mm cross tee to be interlocked between main runners @ 610mm c/c,so as to form 600mm x 600 mm grid as specified in SSR Part-II 2020(Rates) completed all as specified and directed.

Material and labour for powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the completed all as specified and directed.

Supply and fix Powder coated aluminium (minimum thickness of powder coating 50 micron) window and ventilator shutters, fixed type without sash bar, aluminium section weighing minimum 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and as directed

Taking down carefully aluminium/ copper point wiring for light/fan/ socket/bell or power point incl. All fittings i.e. switch, sockets, ceiling rose, regulators, batten holders, etc. complete removing materials to store for keeping in safe custody site or handed over to contractor as schedule of credit and making good disturbed surfaces of walls, floors, etc ccomplete all as specified and as directed

Material and labour for point wiring with 1.5 sqmm, single core, PVC insulated and PVC unsheathed FRLSH cable, 1100 volts grade IS-694 marked, with multistranded copper conductors and earth continuity wire with 1.5 Sqmm cable (including connecting to earth dolly) laid/fixed in and including concealed in PVC rigid conduit on walls/ceiling, and also including sunk type pressed steel terminal box made out of galvanised iron sheet thickness not less than 1mm and 3 mm thick plastic laminated sheet top covers for One light/fan/exhaust fan point controlled by one number one way 5 Amp switch complete all as specified and as directed.

All as per item serial No 94 here-in-before but for One 3 pin 5 Amp socket outlet on same board with other switches.

Supply and fix switch piano, flush type single pole one way 5 Amps 240 volt complete all as directed.

Supply and fix socket outlet 3 pin, 2-in-1, 5 Amps flush type complete all as directed.

Supply and fix switch socket combination multipurpose, 5 in 1, , 5 & 16 Amp flush type complete all as directed.

Supply and fix ceiling rose surface bakelite 65x50mm three terminal complete all as directed.

Supply and fix lamp holder insulated PVC/ Polycarbonate/ bakelite body, with back plate suitable for batten fitting or PVC round or squre box, complete all as directed.

Supply and fix Environmental friendly, ultra modern, energy saving, surface mounted, decorative hexagonal bulk head black-lit LED10 W -IP-66 luminaire comprising of high brightness LEDs complete all as specified and as directed.

Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative batten type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete.

Supply and fixing building security light bracket made of GI pipe 40 mm bore medium grade (bend to shape), 2.00 metre long and fixed with Ms flat iron clamp(clamp shall be 40 x 5mm), nuts, bolts and washers on pole complete all as specified and directed.

Material and labour sub main wiring with 2 runs of 4.0 sqmm, single core, FR-LSH PVC insulated & unsheathed cable conforming to IS-694, 1100 volts with copper conductor multi stranded drawn in and including 20mm dian non metallic PVC grey conduit with all accessories such as Tees, Elbows, junction box, reducers etc as requied alongwith one run of 4.0 sqmm single core FR-LSH PVC insulated & unsheathed copper conductor as continuos earth wire dolly and connecting to existing main switch board / distribution board of each building / qtr as ordered and testing on completion complete all as specified and directed. (Note: 2 run of 4 Sqmm cable and 1 run of 4 Sqmm cable along with conduit all together shall be measured as one unit.)

Material and labour for plate earthing complete with galvanized mild steel plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground vertically (in earth pit not less than 2.25 m deep below normal ground level) with the top edge of the earth plate at a depth not less than 1.5 m below normal ground level, the earth electrode surrounded by adequate quantity of charcoal dust and salt to a packed thickness of 15 cm on all sides and incl GI earth lead wire 4 mm dia or 8 SWG bolted (with GI nuts, bolts & check nuts) and earth plate electrode at one end and connected to main switch board/ DBs etc. at the other, earth strip encased(protected) in and including 15 mm bore GI pipe medium grade with all fittings from top of electrode to main switch board/ DBs etc fixed with and including 25 x 6mm flat iron clamps, bolts, nuts and washer and also including providing watering pipe 20mm bore GI pipe medium grade from bottom of earth pit to top of electrode complete with earth pit in PCC 1:2:4 type B-2 using 12 mm graded crushed stone aggregate, RCC cover, funnel, wire mesh including necessary excavation and earth work complete all as specified and shown in electrical plate No 3 of SSR Pt-I complete all as specified and directed.

Supply and fix exhaust fan with louvers shutter 230V, 50 Hz, metal body, 300mm sweep copper winding and necessary connecting items with flexiable PVC insulated multistranded copper conductor cable of size 1.5 sqmm and making good to the disturbed surfaces complete all as specified and directed.

Supply and fix MCB DB, double door sheet metal class IP-43 enclosure SPN 8 way with 200 A rated bus bar complete and grouted in wall with PCC (1:2:4) type B-0 using 12.5 mm graded stone aggregate complete all as specified and directed.

Supply and fix MCB DB, double door sheet metal IP-43 enclosure SPN 4 way with 200 A rated bus bar complete and grouted in wall with PCC (1:2:4) type B-0 using 12.5 mm graded stone aggregate complete all as specified and directed.

Supply and fix MCBs, SP 6 to 32 Amps In accordance with IS/IEC 60898-1, 240 V, 50 Hz, 10 kA, C-series marked fixing in DBs (DBs catered separately in this Schedule)

Supply and fix MCBs, SPN 32 Amps In accordance with IS/IEC 60898-1, 240 V, 50 Hz, 10 kA ,C-series complete all as specified and directed.

Material and labour for XLPE insulated, PVC sheathed, armoured, heavy duty electric under ground cable, with stranded aluminium conductor, 1100 Volts grade of size 10 sqmm 2 core laid in trenches /floor or fixed on wall /pole in including brass compression cable glands, terminal lugs etc, complete all as specified and as directed.

Supply and spreading clean dry river sand in cable trenches as in cable cushioning complete all as specified and as directed. (Note: Punned thickness shall be measured and paid)

Material and labour for Sub class ‘B’ old size well burnt brick laid flat in trenches over the cable for protection of LT cable complete all as specified and as directed.

M/s Sohini Construction (BID ID -3164400)

M/S Bharat Construction (BID ID -3164222)

M L TREATMENTS (BID ID -3164501)

M/s Talukdar Construction (BID ID -3164407)

M/S Abhishek Enterprise (BID ID -3164586)