Procurement of Dry Ashing spares for OVERHAULING of Unit 1 and 2 at BkTPS

Amount

DISC OF VENT/EQULISING VALVE # Additional Data: Modified 65 NB Two way Vent/Equalising Valve.

SEAT OF VENT/EQULISING VALVE # Additional Data: Modified 65 NB Two way Vent/Equalising Valve.

BODY NUVALOY OF FLY ASH INTAKE VALVE Additional Data: Fitted poke hole cover with lever nuts & bolts.

LEVER FOR HOPPER INLET POKE HOLE Additional Data: MOC: CI; BHN: 350.

POKE HOLE COVER # SIZE-4IN,MOC-CI,AHP-I# FOR ASH INTAKE VALVE,FRONT SIDE

POKE HOLE COVER # SIZE-2IN,MOC-CI,AHP-I# FOR ASH INTAKE VALVE,BACK SIDE

SLIDES FOR TERSG VALVE 9" # Additional Data: MOC- ALLOY CI HARDNESS-250BHN MIN.

SEAL STRIP,TERSG VALVE,9 INCH $FOR FLY ASH SYSTEM NITRILE RUBBER Additional Data: MOC-NITRILE RUBBER

BAND CLAMP FOR 9" TERSG Additional Data: MOC-SS 304

SEAL STRIP,BRANCH ISOLATION VALVE $FOR DRY ASH SYSTEM MATL DOC NO.526-40/192-01,PT-5 Additional Data: MOC-NITRILE RUBBER

BAND CLAMP # MOC: SS# FOR TERSG VALVE (10IN)

DISC MOC-MS IS 2062,AHP-I# FOR SWING DISC VALVE,MAKE-DCIPS Additional Data: 1. MOC: AR400 with hard face welding.Hardness: 400 BHN. 2. For 18"Swing Disc Valve.

SEAT # MOC-CI FG 220,AHP-I# FOR SWING DISC VALVE,MAKE-DCIPS,PN-4 Additional Data: MOC: Alloy CI with high Cr for 18"Swing Disc Valve for Transfer Hopper

ASSEMBLY DISC #WITH CENTER BOLT # AHP-I,PIVOT BALL# FOR TRANSFER HOPPER SWING DISC VALVE,MAKE-DCIPS Additional Data: 1. MOC: EN-24 (For pivot ball, centering bolt & nut). 2. 01 Set: 01 centering bolt + 01 pivot ball + 01 nut + 01 washer. 3. Item to be used in 18" Transfer Hopper Swing Disc Valve

DISC OF NUVA DIFFUSER VALV FOR NUVA FEEDER 12INX10IN,FOR AHP-I

SEAT OF NUVA DIFFUSER VALV FOR NUVA FEEDER 12INX10IN,FOR AHP-I

BODY FLUIDISING TRAY # FOR AHP-I# FOR N/F,MAKE DCIPS,FLUIDISING TRAY Additional Data: Complete assembly

DIFFUSER MOUNTING PLENUM WITH CONNECTOR MOC-SS,AHP-IFOR NUVA DIFFUSER FEEDER,12INX10IN,FA SYSTEM Additional Data: Double Fluiding Point, Center Bolt with SS NUT.

GATE DISC MOC-DURITE 350 BHN,AHP-I# FOR DIFFUSER TYPE ASH INTAKE VLV,MAKE-DCIPS,PN-1 Additional Data: For Fly Ash Diffuser Intake Valve (12"X6").

PIVOT BALL ASSY WITH CENTRE BOLT # FOR FLY ASH SYSTEM (AHP-I) Additional Data: 1. MOC: EN-24 (For pivot ball, centering bolt & nut). 2. 01 Set: 01 centering bolt + 01 pivot ball + 01 nut + 01 washer. 3. Item to be used in 12"X6" diffuser feeder below ESP Hopper.

PULSE JET BAR FOR ISH BAG FILTER FOR BAG FILTER (1SET= 9 BARS) Additional Data: 1 Set=09 Bars with 65Nos fitted nozzles.MOC:SS

UNEQUAL TEE # MOC:CI# FOR FLY ASH SYSTEM,VACUUM LINE,FOR AHP-I Additional Data: 8"X8"X6" (P/P/B) for 12"X6" diffuser feeder

UNION,40NB FOR PULSE JET BAR # MOC: SS# FOR BAG FILTER (AHP-I)

JUBLEE CLAMP FOR BAG FILTER Additional Data: Jubilee Clamp With Nut & Bolt fixing for Bag Filter & Vent Filter of Pulse jetting, AHP-I MOC : SS for clamp & Nut&Bolt. As per sample

GENIUS ENGINEERING WORKS (BID ID -5670393)

UNIQUE MATERIAL HANDLING SYSTEMS PRIVATE LIMITED (BID ID -5667418)

A T ENGINEERING CONCERN (BID ID -5673800)

INDUSTRIAL ENGINEERING SERVICE (BID ID -5673662)

H N MUKHERJEE & ASSOCIATES PVT LTD (BID ID -5666541)