PROVISION OF ADDITIONAL TRANSFORMER ALONGWITH ASSOCIATED ITEMS AT AF STN PUNE UNDER GE (AF)LOHEGAON

S & F Steel tubular swaged poles complete with cast iron plate, finial taper plug, bolt, nuts & screws as specified type 410 SP-55 (11 mtr long) including one coat of red oxide primer and two coats of aluminium paint and making 30 cm wide strips (total -05 Nos) with yellow and black paint alternately on external surface above column/PCC benching including numbering with black paint and painting with bitumenous paint internally and externally for portion embedded complete all as specified and directed.

S & F Air break gang operated switch with 12 Nos insulators outdoor type, triple pole, mechanically operated, suitable for vertical installation, single break, provided with locking arrangement consisting of MS chanel HT post type insulator copper alloy, high pressure assembly drop out fuses operating rod of 20 mm dia GI pipe (medium grade) for operating from 1.2 m above GL complete including drop out fuses conforming to IS-9921 Part-I to V (1982 to 1985) of 1972 rated voltage 11 KV and for current rating 200 Amp all as specified

Material and labour for lightning arresters nominal discharge current Peak 65 KA rating, suitable for operation on HT 11000 volts system, comprising of zinc oxide disks, electrodes, fibre re-in forced composite structure, non tracking weather resistant shedded heat shrinked polymeric housing for withstanding from the effects of pollution, rain, heat and with moisture seal , stainless steel bolts and nuts, stainless steel end fitting cups and fixing arrangements complete all as specified and as directed.

M&L for Cross arms, bracings, supports, clamps and back plates fabricated from structural steel sections i.e M.S. channel or angle sections etc. including new nuts, bolts, washers as reqd dia/length in size, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive one primer coat of red oxide, one under coat and one finishing coat of aluminium paint (1st quality ) as reqd complete as specified.

M & L for Cement Concrete 1:3:6 type C1 (using 20 mm graded aggregate) as Lean Concrete for coping of pole, stay foundation etc including form work & finishing the surfaces even & smooth with out using extra cement complete all as specified

Material and labour for cement concrete 1:2:4, type B-2 (using 40 mm graded stone aggregate) as Lean Concrete for road finishing even and fair without using extra cement complete all as specified and as directed.

Supply, laying & testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty)with stranded aluminium conductor, 11000 volts grade, of size 3 core 95 sq mm.

S&F of cable end jointing kit 95 Sqmm, 3 core XLPE 11kV HT Cable Cold shrinkable outdoor type, incl carrying out 5KV megger test after jointing complete all as specified and directed by Engr-in-Charge.

S&F of cable end jointing kit 95 Sqmm, 3 core XLPE 11kV HT Cable Cold shrinkable indoor type, incl carrying out 5KV megger test after jointing ,complete all as specified and directed by Engr-in-Charge.

Supply, laying & testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty)with stranded aluminium conductor, 1100 volts grade, of size 3.5 core 400 sq mm including aluminium lugs, cable glands ,complete all as specified and directed by Engr-in-Charge.