REPIAR MAINTENANCE OF PERIODICAL SERVICES SEWERAGE SYSTEM HARD STANDINGS PATH AND CERTAIN MISC BR WORKS AT FEROZEPUR UNDER GE AF BHISIANA AREA

Amount

PERIODICAL SERVICES B/R WORKS CODE HEAD 51/695/05

Applying a coat of white wash over and after preparation of existing old decorated plastered/unplastered surfaces of walls, pillars, cornices by brooming down etc, complete all as specified and as directed by Engineer in Charge.

Applying a coat of white wash over and after preparation of existing old decorated plastered/unplastered surfaces of celing complete all as specified and as directed by Engineer in Charge.

Applying a coat of oil bound distemper over and after preparation of old decorated plastered/unplastered surfaces of walls, pillars cornices etc, complete all as specified and as directed by Engineer in Charge.

M&L for complete removal of existing treatment from wall plaster surface by sand paper/electric sand paper grinder, washing, rubbing down and stopping of existing treatment including cleaning of mortar drops, smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots etc and preparation of plastered surfaces finally rubbed and smooth with sand paper all as directed by Engr-in-charge.

M&L for applying interior grade wall care putty 1 to 2mm thick to make the surface smooth as specified and directed by Engr-in-Charge.

M&L for two coats oil bound distemper any tint on already prepared surfaces of walls over a coat of primer complete all as specified in SSR Part I and directed by Engr-in-Charge.

M&L for applying two coat of premium quality exterior emulsion paint over a coat of exterior primer of same make on old decorated plastered/unplastered surfaces ccomplete all as specified and as directed by Engineer in Charge.

Applying a coat of synthetic enamel paint over old painted wooden surfaces of any description having width/girth exceeding 10cm, complete all as specified and as directed by Engineer in Charge.

Applying a coat of synthetic enamel paint over old painted steel/iron surfaces of any description having width/girth exceeding 10 cm complete all as specified and as directed by Engineer in Charge.

M&L for preparation of old painted surfaces of bricks/concrete over 10 cm width/girth and applying one coat of synthetic enamel paint complete all as specified and as directed by Engineer in Charge.

Hacking out old broken glass any thickness, size, quality or description from metal frame including punching or drilling out old glazing pins / spring clips and providing and fixing new onescomplete all as specified and as directed by Engineer in Charge.

S&F sheet glass 3mm thick ordinary quality and glazing with oil putty or fixed with wooden beads in square not exc. 0.5 Sqm in each pane complete all as specified and as directed by Engineer in Charge.

S&F figured glass 4mm thick, pin head type and glazing with oil putty in square not exc. 0.5 Sqm in each pane complete all as specified and as directed by Engineer in Charge.

S&F in repairs MS curtain rod 20mm dia powder coated any colour including MS brackets (any type) with necessary screwsand ends cap (latoo) complete all as specified and as directed by Engineer in Charge.

S & F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls with and including clamps, nut bolts including dismantling of old AC/PVC rain water pipe, fittings etc. complete all as specified and as directed by Engineer in Charge.

S&F 110 mm bore PVC (SWR) bends any radius complete all as specified and as directed by Engineer in Charge.

S&F as in repairs galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tack or galvanised wire staple complete all as specified and as directed by Engineer in Charge.

M&L for 15 mm dia bore tubes medium grade galvanised steel tubing with all fitting and fixed to walls and ceilings or laid in floors including taking down and cleaning for removal to store etc complete all as specified and as directed by Engineer in Charge.

M&L for 20 mm dia tubes, medium grade, galvanised with all fitting and fixed complete to walls and ceilings or laid in floors including taking down complete all as specified and as directed by Engineer in Charge.

S&F in repairs PVC valveless, syphonic action type, flushing cistern 10 Ltrs cap, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and as directed by Engineer in Charge.

S&F in repair syphon set/super flow for 10 Ltr PVC valveless, syphonic action type, flushing cistern, low level complete all as specified and as directed by Engineer in Charge.

S&F in repair Vitreous china squatting pan , 'Orissa' pattern, size 580 x 440 mm white, with integral foot rests complete including provision of lime concrete bedding complete all as specified and as directed by Engineer in Charge.

S&F in repair china wash down water closet padestal pattern white excluding flush and fix to position, including seat cover and connection to drain etc complete all as specified and as directed by Engineer in Charge.

S&F in repairs Plastic water closet seat cover, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed by Engineer in Charge.

S&F in repair Health faucet (ABS Body) mild steel/PVC pipe of 15 mm bore with 1.25 metre long flexible tube and ABS wall hook including making onnections and fixed in position complete all as specified and as directed by Engineer in Charge.

S&F in repairs Vitreous China wash basin, white , flat back,size 550x400mm fixed on existing brackets or stands incl 32mm PVC waste pipe complete all as specified and as directed by Engineer in Charge.

S&F in repairs 15mm dia Pillar taps cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered Hot or Cold with long screwed shanks and flu-nuts screwed for iron pipe complete all as specified and as directed by Engineer in Charge.

S&F in repairs 15 mm bore Stop Valve chromium plated with long shank and cup (concealed type) ,cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union complete all as specified and as directed by Engineer in Charge.

S&F in repairs PVC connections 15 mm size with PTMT nuts of length 450mm complete all as specified and as directed by Engineer in Charge.

S &F in repairs 15mm dia Bib taps, Chromium plated, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed by Engineer in Charge.

S&F in repairs Chromium plated shower rose 125 mm size with or without swivel joints,including fixing to steel pipe or union complete all as specified and as directed by Engineer in Charge.

S&F in repair 15 mm dia Brass CP mixer for wash hand basin mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and as directed by Engineer in Charge.

Supply and fix in repair brass spindle for bib tap, pillar tap, stop cock,angle valve, wall mixture and basin mixture of any description etc, complete all as specified and as directed by Engineer in Charge.

Supply and fix in repair 32 mm dia PVC waste pipe for WHB and sink 90 cm long with union/adopter, complete all as specified and as directed by Engineer in Charge.

S & F in repairs ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe and fixed for 20 mm bore size (Minimum weight 210 gms) complete all as specified and as directed by Engineer in Charge.

S & F rotational moulded polyethylene water storage tanks Capacity of tank 500 litres tripple layer, white colour, (cylindrical vertical with closed top) hoisted and fixed in position, all as specified in SSR part I-2009 including dismantling of existing unserviceable tank and removing from site, complete all as specified and as directed by Engineer in Charge.

M&L for rotational moulded polyethylene water storage tanks Triple Layer White Colour 1000ltr Capacity (Cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I incl dismantling of Old tank complete all as specified and as directed by Engineer in Charge.

S&F 20mm Ball valves, high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe complete all as specified and as directed by Engineer in Charge.

S&F in repair of Aluminium body door cill at bottom part of door length upto 1 mtr to stop entry of of insect inside the room complete all as specified and as directed by Engineer in Charge.

Taking down chowkats & shutters without taking off shutters from the frame, size of opening n.exc. 1.50 sqm each complete all as specified and as directed by Engineer in Charge.

Taking down shutters of any description exc 1 sqm but n exc 2 sqm each complete all as specified and as directed.

Taking down chowkats & shutters without taking off shutters from the frame, size of opening exc. 1.50 sqm but not exc 4 sqm each complete all as specified and as directed.

S & F Pressed steel frames for doors with one or more rebates including necessary fixing lugs,hinges, lock strike plate, etc of size 125 X 60mm including PCC (1:3:6) type C-1 using 20mm graded aggregate as in back of frame complete all as specified and as directed by Engineer in Charge.

Refixing Shutters of any description exc 1 sqm, but not exc 2 sqm each taking down and refix in same opening after easing and cutting in required length and width with necessary screwing and naling if required complete all as specified and as directed by Engineer in Charge.

S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm plain coloured PVC sheet reinforced with MS square tube, supplying & fixing in opening as per specification and drawing complete all as specified and as directed by Engineer in Charge.

S&F Factory made solid panel PVC door shutter 30mm thick (stile), consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, supplying & fixing in the frame at site as per specification and drg, complete all as specified and as directed by Engineer in Charge.

Supply and fixing IInd class hard wood (Hollock) 35mm thick plain framed, factory made panelled shutters (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS-1003 (part – I), kiln seasoned and chemically pressure treated complete all as specified and as directed by Engineer in Charge.

Supply and fix glazed and skelton shutter IInd class hard wood 35mm thick,open rebated and prepare to receive glass, gauge etc. (without sash bars) edge of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc and including glazing 3 mm thick and fixing wire cloth complete all as specified and as directed by Engineer in Charge.

S&F 100mm Butt hinges medium weight, cold rolled mild steel complete all as specified and as directed by Engineer in Charge.

S&F 200mm Aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and as directed by Engineer in Charge.

S&F 150mm Aluminium handles, cast type anodised complete all as specified and as directed by Engineer in Charge.

S&F 250 mm Mild steel Sliding door bolts plate type stove enamelled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts,four on bolt plate and two on staple plate and fixed complete all as specified and as directed by Engineer in Charge.

S&F mild steel 300mm ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed by Engineer in Charge.

S&F in repair mild steel 300mm ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed by Engineer in Charge.

S&F in repairs floor door stopper double leg of size 140mm of aluminium ally body and tongue, anodised, with hard drawn steel spring fixed in floors, complete all as specified and as directed by Engineer in Charge.

Disconnecting existing tanks Exc 250 Ltr and n exc 500 Ltr, setting aside (for lowering if required) for repairs, cleaning, etc and hoisting if required reconnecting and re fixing in position after and including cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes etc complete all as specified and as directed by Engineer in Charge.

Disconnecting existing tanks Exc 500 Ltr and n exc 1000 Ltr, setting aside (for lowering if required) for repairs, cleaning, etc and hoisting if required reconnecting and re fixing in position after and including cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes etc complete all as specified and as directed by Engineer in Charge.

Material and labour for writing letters or figures (Block,Roman,Italic or Indian)as TANK CLEANED ON : DD/MM/YEAR) n exc 15 cm high with Synthetic enamel paint of any colour on any type of Overhead water tanks complete all as specified and as directed by Engineer in Charge.

S&F in repairs 15mm Ball valves, high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe complete all as specified and as directed by Engineer in Charge.

Labour for RCC water tanks Exc 250 Ltr and n exc 500 Ltr, cleaning, etc and hoisting if required reconnecting and re fixing in position after and including cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes etc complete all as specified and as directed by Engineer in Charge.

Demolition of brick or stone boulder masnory, built in cement mortar including all quoins, arches, pillars, etc., but excluding ashlar facing, dressed stonework and percast concrete articles complete all as specified and as directed by Engineer in Charge.

M&L for Brick work with subclass B bricks, staright or curved on plan exc 6.00 mtr mean redius, biult in cement mortar (1:6) complete all as specified and as directed by Engineer in Charge.

Taking down cement plaster on brick or stone masonry Including raking out joints, hacking for key scrubbing down with water etc complete all as specified and as directed by Engineer in Charge.

M&L for 15 mm thick Cement plaster in CM (1:4) on fair faces of brick work or concrete surfaces and finishing the surface even and fair (without using extra cement) etc including applying two coat of cement base paint over and a coat of primer after preparation of new plastered surfaces complete all as specified and as directed by Engineer in Charge.

M&L for 15mm thick cement plaster in CM (1:6) on fair faces of brick or concrete surfaces and finishing the surface even and fair (without using extra cement) etc including applying two coats oil bound distemper (OBD) over a coat of primer and after preparation of plastered surfaces complete all as specified and as directed by Engineer in Charge.

M&L for 15mm thick cement plaster in CM (1:6) on fair faces of brick or concrete surfaces and finishing the surface even and fair (without using extra cement) etc including applying three coats white wash and after preparation of plastered surfaces complete all as specified and as directed by Engineer in Charge.

M&L for 5 mm thick cement plaster 1:3 on fair faces of brick work or concrete surfaces in ceiling and finishing the surface even and fair (without using extra cement) etc including applying three coats of white wash and after preparation of plastered surfaces complete all as specified and as directed by Engineer in Charge.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided complete all as specified and as directed by Engineer in Charge.

M&L for providing cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) in lintels upto 1.5m clear span, cills, steps, seismic and othe similar bands, plinth courses, bed plates, copings, kneelers, apex stones, chajjas, bed plates and the like including weathering, slightly rounded or chamfered angles and throating including necessary formwork complete all as specified and as directed by Engineer in Charge.

SEWERAGE SYSTEM, HARD STANDING B/R WORKS

Demolition of brick or stone boulder masnory, built in cement mortar including all quoins, arches, pillars, etc., but excluding ashlar facing, dressed stonework and percast concrete articles complete all as specified and directed by Engineer in Charge.

M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed by Engineer in Charge.

M&L for Brick work with subclass B bricks, staright or curved on plan exc 6.00 mtr mean redius, biult in cement mortar (1:6) complete all as specified and directed by Engineer in Charge.

Providing precast cement concrete louvres and jallies 25mm thick type B0 (1:2:4 using 12.5mm graded aggregate), (measured solid), including all mouldings complete all as specified and directed by Engineer in Charge.

Taking down cement plaster on brick or stone masonry Including raking out joints, hacking for key scrubbing down with water etc complete all as specified and directed by Engineer in Charge.

M&L for 15 mm thick Cement plaster in CM (1:4) on fair faces of brick work or concrete surfaces and finishing the surface even and fair (without using extra cement) complete all as specified and directed by Engineer in Charge.

Applying two coat of white wash over new plastered surfaces of walls or concrete complete all as specified and directed by Engineer in Charge.

Demolition of RCC manhole, septic tank cover slab and similar works atc complete all as specified and directed by Engineer in Charge.

Providing precast reinforced cement concrete1:2:4 type B1 (20mm graded stone aggregate) in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces set in cm 1:4 complete all as specified and directed by Engineer in Charge.

M&L for providing cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) in lintels upto 1.5m clear span, cills, steps, seismic and othe similar bands, plinth courses, bed plates, copings, kneelers, apex stones, chajjas, bed plates and the like including weathering, slightly rounded or chamfered angles and throating including necessary formwork complete all as specified and directed by Engineer in Charge.

M&L for TMT Mild steel bars 6mm to 8 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed by Engineer in Charge.

Applying a coat of cement base paint over and after preparation of old decorated plastered/unplastered surfaces of walls, pillars, cornices by brooming down etc complete all as specified and directed by Engineer in Charge.

Applying a coat of synthetic enamel paint over old painted steel/iron surfaces of any description having width/girth exceeding 10 cm complete all as specified and directed by Engineer in Charge.

Demolition of cement concrete (unreinforced) in ground floors and paving n exc 15 cm thickness (below or above ground level) and removal of debries from site complete all as specified and directed by Engineer in Charge.

M&L for 75mm thick PCC (1:3:6) type C-2 using 40mm graded stone aggregate as in plinth protection complete all as specified and directed by Engineer in Charge.

M&L for 100 mm thick Cement concrete type D-2, 1:4:8 (40mm graded aggregate) as in sub base to paving complete all as specified and directed by Engineer in Charge.

M&L for machine pressed precast concrete interlocking paver block any shape and size size conforming to IS-15658-2006 of 60mm thickness M-35 Grade with grey cement and pigment complete all as specified and as directed by the Engr-in-Charge.

M&L for cement concrete endura glossy chequered tiles 300 x 300 x 25 mm thick machine pressed set jointed and pointed with grey cement & pigment in neat cement slurry over cement screed bed of mortar 15mm th in CM 1:6 complete all as specified and directed by Engineer in Charge.

M&L for sand cushning 25mm thick for interlocking tiles complete all as specified and as directed by the Engr-in-Charge.

S&F of Anodised alluminium frame for doors, windows, ventilatrs with one or more rebates includingAluminium beading, rubber bead, Tension rods joining cleat for fixing etc, complete all as specified and directed by Engineer in Charge.

S&F of anodised aluminium door shutters, alluminium sections weighing 0.55 kg/M including necessary joining cleats , glazing clips, rubber neoprene packing, handles 2 Nos in each door , hinges anodised aluminium snap beading screws etc, with powder coating of any colour (thickness of powder coating not less than 50 micron) complete includng dusmantling/ taking down complete all as specified and directed by Engineer in Charge.

S&F 5.5 mm thick tinted glass ordinary quality and glazing with oil putty or with wooden/ alluminium shutter (supplied alongwith shutter) exc 0.50 sqm each complete all as specified and directed by Engineer in Charge.

M & L 12 mm thick both sides prelaminated Particle board, exterior grade, fixed with screws to frame work in cup board shutters, partitions, shelves etc. complete all as specified and directed by Engineer in Charge.

S&F in repairs for Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and directed by Engineer in Charge.

S&F in repairs Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg of aluminium (extruded section body) and fixed complete all as specified and directed by Engineer in Charge.

Dismantling boarding, any description, fixed in any position with nails in framed work complete all as specified and directed by Engineer in Charge.

S&F Anodised aluminium snap grid frame work of size 605 x 605 mm for false ceiling complete all as specified and directed by Engineer in Charge.

S&F Exposed metal frame ceiling with calcium silicate board 6mm th of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600 mm x 600mm grid complete all as specified and directed by Engineer in Charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), and rubbish off the premises complete all as specified and directed by Engineer in Charge.

M&L for Glazed ceramic coloured tiles in vertical surface 350x250x7 mm / 450x300x7mm thick including 10mm thick cement plaster in CM 1:4 set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and directed by Engineer in Charge.

M&Lfor Non skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM (1:4) for laying floor finishes complete all as specified and directed by Engineer in Charge.

M&L for Non skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm on vertical surfaces as in skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick cement plaster in CM 1:4 to receive vertical tiles complete all as specified and directed by Engineer in Charge.

M&Lfor Non skid vitirified light shade ceramic tiles 10 thick (square/rectangular) area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM (1:4) for laying floor finishes complete all as specified and directed by Engineer in Charge.

M&L for Non skid/vitirified coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm on vertical surfaces as in skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick cement plaster in CM 1:4 to receive vertical tiles complete all as specified and directed by Engineer in Charge.

M&L for 18-20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including dismentling existing slab/stone etc complete all as specified and directed by Engineer in Charge.

Desludging/ Cleaning of sewage line blockage by rodding from manhole to manhole, Manhole to cleaning eye including that from first manhole to cleaning eye of down take pipe and removing all debris, sludge and solid material from sewage line and removal from site and well flushing with water after cleaning vertical pipe of following dia of pipes at any depth all as specified and as directed by Engineer-in-Charge. Depth of line up to 3 Mtr and the dia of pipe as follows:-

200mm internal dia.

150mm internal dia

100mm internal dia

Desludging/ dewatering ,Cleaning of septic tank/manholes of any depth, including sludge by pumping out of sludge using mechanical equipment and transported by a vehicle of capacity 6000 Ltrs and removed outside MD land including cleaning off shrubs/bushes, vegetarian found around 2 Mtrs from external edge of septic tank and sludge chamber, all as specified and directed by Engineer in charge. Note: (i) Copy of vehicle entry and out i.e., Gate Pass completely mentioning the vehicle/ equipment, along with time and duration of the vehicle reminded inside AF Station duly signed by Engr-in-Charge and Contractor shall be produced during Claiming Payment.. (ii) The quoted rate includes removing and refixing of RCC manhole covers and works shall be carried out with all safety precautions.

Cleaning of gully traps incl removal of blockage by rodding from gully trap to man hole and gully trap to cleaning eye of down take pipe and removing all debris sludge and solid material from waste pipe line and from the gully trap and removal from site and flushing with water after cleaning vertical pipe and spinking of bleaching powder complete all as specified and directed by Engineer in Charge.

Cleaning of manhole chamber of any shape/size depth exceeding 0.6 Mtr but n exc 1.5Mtr by removing sludge/mud,silt, liquid etc(in foul condition to outside MD land premises including testing of manholes by filling with water ) all as specified and directed by mechanical method. Note : for ser item No 108 to 111:- (i) The rates quoted in the above item includes cost of T&P like rods, bamboos, gum shoes,shovel and hand glouses etc complete (ii) The lines or manhole measured once can not measured again within 3 months. If blocks in the same lines or manhole re-occur within 3 months the contractor will clean again & nothing will be paid extra for this. (iii) Minimum 1one sweeper and one helper shall be deployed by contractor and they shall be present on all working days from 0900 hrs to 1700 hrs for maintenance of sewage lines. The persons will be detailed by JE/AGE (I) concerned every morning for attending complaints on daily basis. (iv) The complaint has to be rectified within 24 Hrs as given in complaint slip failing which penalty will be imposed @ 500/- per complaint per day.

GUPTA AND ENGINEERS