Construction of Three Class Rooms on the 2nd floor school building in Govt. senior secondary school at Tal Distt. Hamirpur

Amount

Providing form work with mild steel plates 3.15 mm (three point one five millimetre) thick welded with angle iron in frames 30x30x5mm (Thirty into thirty into five millimetre) so as to give a smooth finish including centring, shuttering, strutting, propping and centring with wooden battens and ballies fo all heights of propping and centring below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Columns, pillars, posts and struts, square rectangular/polygonal in plan.

Beams, cantilivers, girders and lintels such as soffits of beams, beam haunching, cantilevers girder, bressumers and lintels of all height/thickness.

Flat surfaces such as soffits of suspended floors, roofs, landings shelves and the like etcetera In all thickness in any floor level.

Stair Case with sloping of stepped soffits excluding landing but including preparing of the surface and finishing of nosing upto floor to all level.

Providing and laying design mix cement concrete M25 ( M- Twenty five) with characteristics strength of 25N/mm2( Twenty Newton per meter square) with minimum cement content of 400.00 kg( four hundred kilogramme), mechanically mixed and vibrated and curing complete excluding the cost of form work and reinforcement for reinforced concrete work upto all floor levels in all heights including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Suspended floor, roofs, landings, shelves and their support, balconies, beams, girders, bressumers and cantilever upto all floor level

Columns, pillars, posts and struts upto all floor level

Stair case except spiral stair cases excluding landing but including preparing of topsurface and finishing of nosing upto all floor height in all thickness.

Providing and laying tor steel reinforcement makes of (TATA/SAIL, Tisco, RINL, Jindal, Panther, Shyam Steel) for reinforcement cement concrete work including bending, binding, straightening and placing in position including the cost of binding wire complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Brick work using second class common burnt clay building bricks in cement mortar 1:6 ( One cement : Six sand) in super structure in all heights and depth including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing wood work in frames of doors, windows, clearestory windows and other frames wrought framed and fixed in position second class deodar wood including entire carriage of material with in all leads, lifts, drawings, technical specifications as per direction by Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 40mm (Forty millimetre) thick second class deodar wood panelled glazed or panelled and glazed shutters for doors windows and clerestory windows including black enamelled iron butt hinges with necessary screws complete including entire carriage of material with in all leads, lifts, drawings, technical specifications as per direction by Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 40mm (Forty millimeters) thick wire gauge shutters with second class deodar wood using galvanized M.S. wire gauge of I.S. gauge designation No. 85G (Eight five gauge) with beading in panels in door window and clerestory window with wire of dia 0.56mm (Zero point five six millimeter) for doors windows clerestory windows including bright finished black enameled iron butt hinges with necessary screws and beading in pannels both side complete including entire carriage of material with in all leads, lifts, drawings, technical specifications as per direction by Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 250x16mm (Two hundred fifty into sixteen millimetre) nominal size anodized aluminium (Jindal make) sliding door bolts anodized / powder coated colour or shade with bolts and nuts screws etc complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing aluminium (Zindal make) tower bolts (barrel type) anodized/ powder coated transparent or dyed to required shade and colour with screws including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

250x10mm (Two hundred fifty into ten millimetre) nominal size.

200x10mm (two hundred into ten millimetre) nominal size

Providing and fixing aluminium (Zindal make) handles anodized/ powder coated transparent including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

125mm (One hundred twenty five millimetre)

100mm (One hundred millimetre)

Providing and fixing 300x15mm (Three hundred into fifteen millimetre) nominal size bright finished brass sliding door with bolts and nuts screws etc complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

15mm (Fifteen millimetres) cement plaster in single coat on rough side of brick/concrete/stone walls for interior plastering upto any floor level including arrises, internal rounded angles, chamfers, grooves and/or rounded angles not exceeding 80mm (Eighty millimetres) in girth and finished even and smooth in cement mortar 1:6 (One cement : six coarse sand) upto all floor level in all heights including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

6mm (Six millimetres) cement plaster to ceiling in cement mortar 1:3 ( One cement : three coarse sand) upto all floor level in all heights including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying Kota Stone 25mm ( twenty five millimetre) thick mirror polished in uniform colour 55x55cm ( fifty five into fifty five centimetre) minimum size flooring, 20mm ( twenty millimetre) average thick base of cement mortar 1:4 ( one cement : four sand) laid over and joints with grey cement slurry round with pigment to match the shade of slab including rubbing and polishing complete as pattern finish with 10cm (Ten centimeter) wide strip of approved marble stone as per approved design upto all floor level/heights including entire carriage of material with in all leads, lifts, drawings, technical specifications as per the direction by Engineer-in-Charge and other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying Kota stone having size 55x15cm ( fifty five into fifteen centimetre) mirror polished in uniform colour slab 25mm ( twenty five millimetre) thick in risers of steps, skirting dado and pillars laid in 12mm ( twelve millimetre) thick in cement mortar 1:3 (one cement : three sand) and jointed with grey cement and pigment to match including rubbing and polishing complete as pattern finish with 10cm (Ten centimeter) wide strip of approved marble stone as per approved design upto all floor level in all heights including entire carriage of material with in all leads, lifts, drawings, technical specifications as per the direction by Engineer-in-Charge and other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Applying priming coat over new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter coarse sand papering and knotting ready mixed paint brushing wood primer pink ( ASAIN/NEROLAC/ICI-DULUX ) upto all floor level in all heights including entire carriage of material with in all leads, lifts, drawings, technical specifications as per direction by Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Painting two coats (excluding priming coat) on new wood and wood based surfaces with readymixed paint, brushing to give an even shade including cleaning of all dirt, dust and other foreign matter, coarse sand papering and stopping with white readymixed paint ( ASAIN/NEROLAC/ICI-DULUX ) complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Applying Birla white wall care putty with two coats ( JK wall putty/ Birla white putty ) to achieve avrage thickness of 1mm ( one milimetre ) over plastered surfaces after thoroughly brushing the surface free from mortar dropping, dust, loose materials and other foreign matter coarse sand papered smooth to give fine finish to the surface complete upto all floor level in all heights including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Finishing wall with weather proof exterior grade emulsion of approved design (Apex Ultima, Asian Paint) on undecorated wall surface (two coats) to give an even shade and final finish after thoroughly cleaning the surfaces to remove all dirt dust and other foreign matter etcetera including course sand papered smooth complete including entire carriage of material with in all leads, lifts, drawings, technical specifications as per direction by Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Pankaj Soni