Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹41.0 LAccepted-AOC | L1 | Accepted-AOC Lowest | |
| 2 | L2₹44.8 L+₹3.3 L (7.96%)Rejected-Finance | L2 | Rejected-Finance Other than lowest | |
| 3 | L3₹46.2 L+₹4.7 L (11.3%)Rejected-Finance | L3 | Rejected-Finance Other than lowest | |
| 4 | L4₹46.5 L+₹5.0 L (12.1%)Rejected-Finance 0 0 MOH SITARGANJ PIPRI POST UKHLI KATRA SHAHJAHANPUR UTTAR PRADESH 242301 SHAHJAHANPUR SHAHJAHANPUR UTTAR PRADESH 242301 | SHAHJAHANPUR | UTTAR PRADESH | 242301 | L4 | Rejected-Finance Other than lowest | |
| 5 | L5₹46.7 L+₹5.2 L (12.5%)Rejected-Finance D BLOCK D 57 BARRA 8 BARRA 8 BARRA 8 KANPUR NAGAR UTTAR PRADESH 208027 | KANPUR NAGAR | UTTAR PRADESH | 208027 | L5 | Rejected-Finance Other than lowest |
Tender Value
₹43.6 L
EMD Value
₹87,200
Closing Date
7 Feb 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE(AF) GORAKHPUR
GE(AF) GORAKHPUR
UPGRADATION OF CERTAIN SMQS (PHASE-II) AT AF STN GORAKHPUR
2024_MES_638030_1
9133/E8
Open Tender
Civil Works
Item Rate
180 days
GE(AF) GORAKHPUR
Class d cat a i
8 documents required · 8 mandatory
₹500
Yes
GE(AF) GORAKHPUR
₹87,200
Yes
24 Feb 2024
18 Jan 2024
9 Feb 2024
18 Jan 2024
7 Feb 2024
1 Feb 2024
18 Jan 2024 - 25 Jan 2024
Amount
Demolition of brickwork built in cement mortar including quoins, arches, pillar etc complete all as specified and directed.
Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.
M&L for brickwork with sub class 'B' bricks, straight or curved on plan exc 6m mean radius built in CM 1:4, all as specified and directed.
M&L for rendering 15mm thick on faces of brick work or concrete surfaces CM 1:6, and finishing the surface even and smooth without using extra cement complete all as specified and directed.
M&L for rendering 15mm thick on faces of brick work or concrete surfaces CM 1:4, and finishing the surface even and smooth without using extra cement complete all as specified and directed.
M&L for rendering 5mm thick on faces of brick work or concrete surfaces CM 1:3, as in ceiling, and finishing the surface even and smooth without using extra cement complete all as specified and directed.
M&L for preparation of new plastered surfaces of ceiling & applying three coat white wash complete as specified.
M&L preparation of old surfaces of ceiling & applying one coat of white wash complete all as specified and directed.
M&L for complete removal of existing treatment of wall and applying two coats of oil bound distemper over and including 2mm thick birla/ JK white wall care putty over one coat of white cement primer complete all as specified and directed.
M&L for preparation of new surface of wall and applying two coats oil bound distemper over and over and including 2mm thick birla/ JK white wall care putty over one coat of white cement primer complete all as specified and directed..
M&L for preparation of old plastered surface of wall and applying two coat coat of weather coat paint over and including 2mm thick birla/ JK white wall care putty over one coat of white cement primer complete all as specified and directed..
M&L for preparation of new plastered surface of wall and applying two coat coat of weather coat paint over and including 2mm thick birla/ JK white wall care putty over one coat of white cement primer complete all as specified and directed..
Taking down chowkat or frames not exc. 1.5 sqm each with shutters (without taking off shutters from frames)
Taking down chowkats with shutters exceeding 1.5 Sqm but n. exc 4 sqm each ( without takig off shutters from the frames)
S&F pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete as specified, supplied and fixed of frame size 125x60mm.
S&F pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete as specified, supplied and fixed of frame size 105x60mm.
S&F 2nd class HW plain fillets wrought of sectional area exc 3 Sq.cm & n. exc 6 Sq.cm square or rectangular in section fixed with screws fixed in repairs.
M&L for 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete.
Second class hardwood glazed and skeleton door shutters 35mm thick, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beeds for securing glass etc.
S&F 18 mm thick HDMR(high desity high moisture resistance) board of grade -1 quality make: green ply, Acton, Tesa or other make as approved by GE of one side prelem and other side to suitable for high gloss finish mica of approved qulity make century or as approved by GE fixed with screws,solvent cement/adhesive to make cup board shutters, sides, top and bottom shelves in side the cabinet and shutters or drawer complete all as specified as per manufacturers instruction.
S&F 18 mm thick HDMR(high desity high moisture resistance) board of grade -1 quality make: green ply, Acton, Tesa or other make as approved by GE of one side prelem and other side to suitable for high gloss finish mica of approved qulity make: century or as approved by GE fixed with screws,solvent cement/adhesive to make cup board shutters, kitchen cabinet, CB etc sides, top and bottom shelves in side the cabinet and shutters or drawer complete all as specified as per manufacturers instruction.
S&F piano hinges for kitchen cupboard 30mm comlete all as specified in SSR Part I.
M&L for 100mm long butt hinges, extruded aluminium alloy with galvanised mild steel hinged pin, anodised and fixed, type C-21 complete.
M&L 300mm aluminium alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts fixed.
M&L Extruded aluminium alloy handles, fabricated type, anodised 150 mm size.
S&F aluminium anodised barrel tower bolt extruded section 150 mm long
S&F Hasp & Staple of size 100mm safety type aluminium anodised , including bolt to hinge plate and fixed with screws fixed in repairs.
M&L stainless steel steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.10mm and fixed with stainless steel wire staples complete.
S&F 300 mm long mild steel ordinary rat tail rod pattern springs including roller and roller plate complete.
S&F floor door stopper overall length of cover plate 150mm of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.
M&L for preparation of new wooden surfaces and applying two coat synthetic enamel paint over a coat of pink primer complete.
M&L for preparation of new surfaces of steel and applying two coat of synthetic enamel paint over a coat of red oxide complete all as specified.
M&L for preparation of old surfaces of steel and applying one coat of synthetic enamel paint complete.
S&F PVC door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening, all as specified and directed.
S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & botttom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame including 2 nos aluminium bow handle 150mm and 2nos aluminium tower bolt of size 150mm etc complete all as specified and directed.
S&F in repairs stainless steel harrison rails/ curtain rod fancy type 25 mm dia including bracket, stops, rollers etc complete all as specified and directed complete.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) complete all as specified and directed.
M&L Non-skid ceramic coloured tiles 7 to 8 mm thick ( square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the coloured of tiles including laying of screed bed or bedding layer of mortar 15mm thick in cm 1:6 complete.
M&L for glazed ceramic coloured tiles in vertical surface 350 x250 x7mm / 450x350x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match coloured tiles including rendering 10 mm thick on faces of brick or concrete surfaces in cm 1:3 complete all as specified and directed.
M&L Non-skid ceramic coloured tiles 7 to 8 mm thick ( square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the coloured of tiles including laying of screed bed or bedding layer of mortar 15mm thick in cm 1:6 complete.
M&L for 20mm thick granite stone (any type of work) in steps, jambs, pillars, cooking platform and like in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.
M&L in Machine cut Polished kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing finish over 15mm thick screed bed in CM(1:6) complete
M&L in Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with over 10mm thick screed bed in CM(1:3) complete
M&L for chamfers, splays or arris of granite in face work exc. 15mm but n. exc 50 mm wide complete all as specified and as directed.
Taiking up or down steel tubing and connections, 15 mm bore complete all as specified and directed.
Taking up or down steel tubing and connections, 20 mm bore complete all as specified and directed.
Taking up or down steel tubing and connections, 32 mm bore from sunken floor complete all as specified and directed.
Cutting chases in brick walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 for concealed water tubings, cutting not exceeding 10cm girth complete all as specified and directed.
M&L of 15mm bore Unplasticised PVC pipes of pressure rati ng 10 kg/ sqcm fixed concealed complete to walls and ceilings or laid in floors complete all as specified and directed.
M&L for Unplasticised PVC pipes 20mm bore of pressure rating 10 kgf/cm sqm fixed complete to walls and ceilings or laid in floors complete all as specified and directed.
M&L for GI tubing 32 mm bore 'medium grade' galvanised with all fittings and fixed complete in sunken floor complete all as specified and directed.
S&F in repairs Viterous China water closet Pedestal patteren size 580 x 440 white, with S or P traps including seat cover, and fixing in repairs ( excluding flushing cistern and flush pipe) complete including connection to trap, and to flushing pipe, anti syphonage pipe etc. including trap set in and including concrete and making good to floor.
S&F in repairs wash basin, Vitreous China white flat back of size 550x400mm including 32mm bore Chromium plated waste fitting cutting for and pinning in ends of brackets or erecting stand but excluding taps, waste, chain and plugs and porcelain stopper but including brackets.
S&F in repairs bottle trap of PTMT having minimum water seal of 25mm (min weight 32mm-260gms/ 40mm 270gms)
S&F in repair soap dish any type fixed to plugs with chromium plated brass screws complete all as specified and as directed.
Supply and fix in repair PVC 10 Ltrs valve less, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete with flush pipe etc. ISI approved complete all as specified and directed.
S&F Aluminium anodised tubular towel rail 20mm dia 600 mm long, fixed complete all as specified and as directed.
Taking down rain water / vent pipe of any description including fittings etc. including removal to store, complete all specified and directed.
S&F PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints fixed to wall or laid in floors.
Ditto all as per item above but 75 mm bore,complete all as specified and as directed.
S&F 110mm bore PVC (SWR) bends, of any radius provided without access door,complete all as specified and as directed.
Ditto all as per item above but 75 mm bore,complete all as specified and as directed.
M&L for 75mm bore PVC (SWR) floor trap with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and as directed. (concrete to be measured seperately)
S&F 75mm bore stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays, including securing ends of stays to wall or roof complete.
S&F 100mm bore stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays, including securing ends of stays to wall or roof complete.
S&F vent cowl for 75 mm bore pipe complete all as specified and as directed.
S&F vent cowl for 110 mm bore pipe complete all as specified and as directed.
S&F in repair kitchen sinks with drainage board overall size 915mm x 460mm bowl size 410mm x330mm x116mm, made of stainless steel 1 mm thick with plugs, washers and waste; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to waste pipe and coupling complete all as specified and directed.
Supply and fix in repairs cast copper alloy chromium plated fancy type angle cock, of 15 mm bore complete all as specified and directed.
S&F in repairs gun-metal gate valve 20 mm bore, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.
S&F in repairs fancy type, chromium plated bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule 15 mm bore complete all as specified and directed.
S&F PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed.
S&F in repairs chromium plated shower roses with or without swivel joints, any size incl fixing to steel pipe or union complete.
S&F in repairs 15 mm bore pillar tap fancy type cast copper alloy chromium plated screwed down high pressure with or without lettered ' Hot' or 'Cold' with long screw shanks screwed for iron pipe or union complete with water savimng technmology..
S&F in repairs 15 mm bore wall mixture fancy type cast copper alloy chromium plated screwed down high pressure with or without lettered ' Hot' or 'Cold' with long screw shanks screwed for iron pipe or union complete water saving techology..
S&F 1 mm thick stainless steel utensil rack of size 600x900mm and fixing to wall with screws complete all as specified.
Dismantling water tanks capacity exc 250 but n. exc 500 Ltrs complete all as specified and directed.
S&F rotational moulded polyethylene water storage tanks white colour tripple layers with thread type locking cover arrangement, 500 ltrs (cylindrical vertical with closed top ) hoisted and fixed in position complete.
S&F Ball valves high pressure, with polythene float and fly nut complete, screwed for iron pipe 20 mm bore or brass ferrule and fixed complete.
M&L mild steel Framed work such as grills, gratings etc with ends of bars shouldered and / or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks, cooler stand and other similar work.
Demolition of cement concrete in ground floors and paving n. exc 15cm thickness (below or above GL) complete.
Demolition of RCC concrete in ground floors and paving n. exc 15cm thickness (below or above GL) complete.
Dismantling timber scantlings 40 Sqcm and over in section, in unframed work in any position complete
Dismantling plain or corrugated steel sheeting, any thickness including Nainital or similar pattern roof coverings complete.
Removing building material salvage (other than spoil payable under respective items ) etc complete to a distance out side of MD land of not less than 2 KM including loading unloading and stacking at the distination complete all as directed at site..
M&L for 75 mm thick cement concrete type C-2 1:3:6 (using 40 mm graded stone aggregate) as in plinth protection finished surface even and smooth without using extra cement.
Cutting holes in brick wall (exc half brick and n exc one brick )in cement mortar or cement lime mortar and stone wall built in lime mortar for holdfasts or inserting rungs for staging or roofs complete all as specified.
M&L for cement concrete 40 mm thick 1:2:4 type BOusing 20 mm graded stone aggregate as in floors finishes even and smooth with using extra cement complete all as specified and directed.
S&F powder coated (thickness of powder coating not less than 50 micron) aluminium frame for window and ventilators, including all fittings such as jointing cleats complete all as specified
S&F powder coated (thickness of powder coating not less than 50 micron) aluminium shuters for window and ventilators,sliding type without sash bars, with aluminium sections weighting not less than 0.55 kg/mtr including jointing cleat for fixing, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as 01 No 150mm long peg stays, 02 nos 100mm long higes, type B-21, 01 no 150mm long tower bolt and 01 no 125mm handle etc, complete all as specified
S&F 4 mm thick sheet glass ordinary quality and glazing with oil puty in square not exeeding 0.5 sqm in each pan complete all as specified and directed.
Demolition of lime concrete from sunken portion or concrete of any description and any position and waste materials out from MoD Land complete all as specified and directed .
M&L cleaning sunken portion of slab (Bottom & sides) and providing water proofing treatment as under :- (a) Providing min 3" concave coving with PCC 1:2:4 type B-0 using 12.5mm graded stone aggregate admixed with WPC complast X 421 IC of fosrock or equvalent. Cement slurry admixed with bonding compound Nitobond AR /Pedific 2K to be used for bonding of coving with RCC member. Covering CI pipes with PCC 1:2:4 type B-0 using 20mm graded stone aggregate admixed with integral WPC complast X 421 IC (Fosroc Chemicals India Ltd). (b) Applying 2 full coats of brush bond acrylic emulsion based elastromeric water proofing coating after the primer with a min time gap of 4-6 hrs between 1st & 2nd coat. (C) Presure grouting to be done with necessary procedure and chemical if required at site. (d) Applying 15mm thick plaster in CM 1:4 admixed with WPC complast X 421 IC.
M&L for lime mortar 1:3 with 40 mm graded stone aggregate as in filling of sunken portion complete all as specified and directed.
M&L 40mm thick cement concrete type B-1 1:2:4 (20mm graded aggregate finished even and smooth with using extra cement in sunken portion) mixed 3% of water proofing compound with cement (water proofing compound shall be measured and paid separately under respective items of this schedule).
S&F in repairs fancy type, chromium plated long body bib taps, for kitchen sink cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule 15 mm bore complete with water savinmg technology. all as specified and directed.
S&F PTMT grating doom square 150mm size (minimum wt 100 gms) complete all as specified and directed.
S&F PTMT grating doom square 150mm size (minimum wt 100 gms) with waste hole complete all as specified and directed.
Dismantling of brick tiles or terracing tiles single layer bedded in cement mortar on roof complete all as specified and directed.
Demolition of cement concrete in roof including plastering and leeping including cleaning surface of roof with wire brush / mechanical brush throughly to remove old dirt / loose particles to expose clean concrete slab clean with watering etc complete all as specified and directed.
M&L for cutting out cracks to V section in existing roof or terracing, cleaning out, wetting, grouting with cement and sand slurry in 1:3 complete all as specified and directed.
M&L for PCC 1:2:4 type B-0 using 12.50mm graded stone agg with WPC as in padding to maintain proper slope as required al as specified (WPC shall be paid separatly.)
M&L rendering 15 mm thick in cement mortar 1:4 over PCC bedding with water proofing compound and finishing the surface even and smooth without using extra cement complete all as specified directed.
M&L for priming over roof surface @ 0.25 Ltr/Sqm over a cleaned roof surface and applying one coat of bitumen painting with hot blown grade bitumen 85/25 @ 1.20 Kg/ sqm and minimum 3mm thick APP based polymeric membrane reinforced with polyester non wove fabric ( wt not less than 150gms/ sqm) land on primed surface by forced application complete all as specified and directed.
M&L for PCC 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) as in roof kerb / benching in radius 10 cm with waterproofing compound as per manufacturer's instructions complete all as specified and directed.
M&L for 7 to 8mm thick size 300x300mm non skid tiles laid over & including screed bed in cement mortar 1:6, jointed & pointed in CM 1:3 Mixed with coloured cement to match the shade of tile complete all as specified and directed.Make : Johnson Endura (orient Blue)
Taking down carefully aluminium point wiring (light, fan, socket bell or power) , complete with fitting such as switches ceiling roses,lamp holders sockets,regulators,call bell light fitting with PVC conduit surface /concealed or wooden pattens including sunken cast iron /pressed steel terminal boxes etc and making good the disturbed surfaces of walls, roof, floors etc to match with the existing surfaces all as specified and directed by Engineer in charge.
Taking down carefully Old unserviceable aluminium sub main wiring with wooden batten/PVC surface conduit of any size and making good the disturbed surfaces of walls, roof, floors etc to match with the existing surfaces complete all as specified and directed by Engineer in charge.
Taking down carefully Main switch and Distribution boards any make and size .and making good the disturbed surfae all as required and directed at site
Taking down and Re fixing carefully Exhaust Fan of any sweep and size compete with replacement of connecting wire and painting the exhaust fan with grey colour all as required and directed at site
M/L for Sub Main Wiring with Two single core PVC insulated cable of size 6.0 Sqmm multistranded copper conductor drawing into and including concealed rigid non-metallic PVC conduit, medium grade not less than 25mm dia with all conduit fitting,fixing accessories and 6 Sqmm multistrand copper conductor cable as continuous earth wire complete all as specified and directed by Engineer in charge Note :- Two run of 6 sq mm Wire and One run of 6 Sqmm Earth wire in One RM length Measured as one unit length.
M/L for Sub Main Wiring with Two single core PVC insulated cable of size 4.0 Sqmm multistranded copper conductor drawing into and including concealed rigid non-metallic PVC conduit, medium grade not less than 25mm dia with all conduit fitting,fixing accessories and 4 Sqmm multistrand copper conductor cable as continuous earth wire complete all as specified and directed by Engineer in charge Note :- Two run of 4 sq mm Wire and One run of 4 Sqmm Earth wire in One RM length Measured as one unit length.
M&L for Point wiring with PVC insulated 1.5 sq mm multi stranded copper conductor cable 1100 volts grade drawn into and including concealed PVC conduit not less than 20mm (ISI marked) including all fitting and fixing accessories including GI sunken box terminal boxes duly painted with two coats of anti-corrosive paint in side and inner and outer cover for mounting of modular switches, sockets, fan regulators etc and PVC insulated 1.5 Sqmm multistranded copper conductor cable as earth wire including sunken box and modular plate and making good the disturbed surfaces to match with the existing surfaces complete all as specified and directed by Engineer in charge. (a) One light point/fan point controlled by one switch.
(b) One fan/light/bell point controlled by one switch, complete all as specified and direc ted at site.
(c One socket point controlled by one switch on same board, complete all as specified and direc ted at site.
(d) One socket point controlled by one switch on Independent board, complete all as specified and direc ted at site.
Description all as per item No 114 here in befor but with 1100 volts grade copper stranded conductor cable of size 2.5 Sqmm with 1.5 Sqmm multi stranded copper conductor PVC for 3 pin switch socket outlet15 Amp independent board complete all as specified and directed by Engineer in charge .
Supply and fixing BLDC ceiling fans complete with blades, with remote and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor complete with anti sucide fan rod complete with hanging a as required and direted at site Make Haves/Bajaj/Crompton
Taking down old ceiing fan after disonnecting and deposited to E/M yard all as required and directed
S&F Single pole and neutral metal clad enclosure with a two pin and earth plug and socket 240V complete with one single pole MCB 20 Amps 'C' series including plug top complete.
Taking down the old existing exhaust fan of 300/380 mm sweep and refixing after minor repair if any and painting the fan with grey enameled paint and replacement of copper wire all as directed at site
Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm complete with making the hole on wall and makng good the disturbed surface a as required and directed at site.
M/L for modular switch 1 module AC 230 volts 10 Amps single pole one way complete all as specified and directed by Engineer in charge.
M/L for Modular Socket, 6A - 2/3 pin combined 2 module AC 230 volts complete all as specified and directed by Engineer in charge Make- Anchor, Plzaa, Leader.
M/L for Modular Socket, 6A/16A - 2/3 pin combined 2 module AC 230 volts complete all as specified and directed by Engineer in charge Make- Anchor, Plzaa, Leader.
M/L for modular switch 1 module AC 230 volts 16 Amps single pole one way complete all as specified and directed by Engineer in charge. Make- Anchor, Plzaa, Leader.
M/L for Ceiling rose surface bakelite 65 mm x50 mm three terminal AC 230 volts flush type complete all as specified and directed by Engineer in charge Make- Anchor, Plzaa, Leader.
Supply and fixing in repairs LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified.
Supply and fixing in repairs LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete.
S&F in repairs rechargeable emergency inverter LED batten 20 watt compact 3-feet LED batten/tubelight,cool daylight with backup of 3 hrs complete with fixing on wall all as directed by ENG in charge
S/F in repairs LED building security light fitting 10 watt LED flood light model BVP 131 of PHILIPS or equivalent complete with GI bracket clamps nut bolts a as required and directed at site all as specified and directed by Engineer in charge.
S & F in repairs Sheet metal enclosure DBs Tripple Pole and Neutral 4- way with 200 Amps rated bus bar 415 volts single pole and neutral complete double door with mounting flush on wall complete all as specified and directed by Engineer in charge Make- Legrand cat part No.- 607715 , L&T, ABB.
S & F in repairs Sheet metal enclosure DBs Single Pole and Neutral 8 way with 200 Amps rated bus bar 240 volts single pole and neutral complete double door mounting flush on wall complete all as specified and directed by Engineer in charge Make- Legrand,L&T,ABB
S & F of MCB, double pole, 40 Ampere breaking capacity 10 KA, 240 volts with and including taking down old unserviceable one complete all as specified and directed.
Supply and fixing 415V 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the DB complete with connection testing and commissioning complete all as specified and directed at site. (i) TPN/FP 40 to 100 AMP
Supply and fixing amp rating 240V, 10KA 'B' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning. (i) SP 5 To 32 AMP
Supply and fixing bell push flush type5 amp includinf provn of Bell ding dong, AC 230 volt SP complete all as specified and directed at site.
Supply and fixing amp rating 240V, 10KA 'B' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning. (i) SP 5 To 32 AMP
M&L in repairs Earthing complete with galvanised steel earth plate electrode 60 cm x60 cm x 6 mm thick buried directly in ground ,(Earth pit not less than 2.25 meter deep below ground level) with top edge of plate not less than 1.5 meter below normal ground level ,connected to and including galvanised iron earth wire 4 mm dia by means of nut, bolts, check nuts and washers of galvanised iron or steel complete all as specified and directed including testing on completion including the material and labour of the following : - (a) Excavation and earth work for drilling hole for electrode in any type of Soil. (b) PCC pit in cement concrete 1:2:4 type B-1, Pre cast RCC cover with suitable handle 40 mm thick in PCC 1:2:4 type B-1, reinforced with welded steel wire fabric weighing not less than1.87 Kg/ Sq meter. (c) Funnel with watering pipe of GI 20 mm nominal bore light grade and lugs etc complete all as specified and directed (d) 15 mm nominal bore medium grade GI protection pipe 5 meter long for protection of earthing lead complete all as specified and directed. (e) Requisite quantity of common salt and charcoal. (f) Testing of earthing.
Taking down the hot water heater 25 litre capacity from wall and refixing after repair with replacement of minor part if required and making the connection with repalacement of PVC connection 2 nos all as required and difrected at site
Taking down the electric meter after disconnecting the connection and refixing the same with sealling all as required and directyed at site
Hindustan Power Corporation
Comfort AC and Refg. Engineers
M/S GUPTA TRADERS
M/s Pandey Trading Company
M/s Durgesh Kumar Mishra
M/S SHAILZA TRADERS
ANIRUDH ENTERPRISES
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .