Construction of black top approach road for length of 177 mtrs with parking area of size 40 m x 10 m and construction of waiting hall for Helipad at Baratang. SW - Providing IEI and EEI.

Amount

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.

Group - C

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.

2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

2 X 6 sq. mm + 1 X 6 sq. mm earth wire

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

5/6 A switch

3 pin 5/6 A socket outlet

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.

Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required.

Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required.

Supplying and fixing call bell/ buzzer suitable for single phase, 230 V, complete as required.

Installation, testing and commisioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube etc. directly on celling/ wall, including connetion with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

6 way (4 + 18), Double door

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Single pole

Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing 20 A, 240 V, SPN Industrial type socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 A "C" curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.

Providing and laying earth connection from earth electrode with 4.00 mm dia copper wire in 15 mm dia G.I. pipe from earth electrode including connection with copper thimble excavation and re-filling as required

Providing and fixing 4.00mm dia copper wire on surface or recess for loop earthing as required.

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required.

Upto 35 sq. mm

Supplying, installation, testing and commissioning of ASHLOK make SEE brand safe earthing electrode type-19, 50mm dia, length 2 mtrs (short time current -21.4 KA rms for 1 sec, peak-51.59 KA) with back fill compound including providing masonary enclosure with cover plate having locking arrangement etc. as required.

Supplying and fixing of Recess mounted downlighter 24W, Make: Bajaj, Dovee NXT Recess RD Model No. BZSLO.nxt 24 L LED WH RD TY or its equivalent as approved by Engineer - in - Charge.

Supplying and fixing of Recess mounted downlighter 15W, Make: Bajaj, Dovee NXT Recess RD Model No. BZSLO.nxt 15L LED WH RD TY or its equivalent as approved by Engineer - in - Charge.

Supplying of Exhaust Fan 250mm Sweep (Non Mettalic Type) with all accessories etc as required.Make:-Havells, Model: Ventil Air-DX White or its Equivalent to ISI as approved by EIC

Supplying of 5 star, 26W to 32W (BLDC type) energy saving A.C Ceiling fan (1200mm sweep) for operation of 230v, with all accessories etc as required. Make:-Havells. Model : Efficiencia DX BLDC White or Equivalent to ISI as approved by EIC.

Supplying of Mirror Light 9W LED surface/wall mounted LED batten luminaires, Make: Havells, Model LUMLINE, Item Description; LUMLINEBS9WLED 865SPCWH or its equivalent to ISI as approved by Engineer - in - Charge.

Supplying of Surface mounted 10W LED bulkhead fitting back lit luminaire, Make:- Havells, HEXA 10W-IP66 , Cat No. HEXAFT10WLED857SSYMBOPC or its equivalent as approved by Engineer - in - Charge.

Supplying, Installation, testing and Commissioning of high wall mounted split type Air conditioner of 1.5 Ton capacity with atleast 5 star rating and copper condenser of Make : Hitachi Yoshi 5400FXL FROST WAS Inverter-R32 RAS.G518PCA1SF or ites equivalent to IS specification with copper codenser coil and rotary compressor i/c providing standard length of refrigerant copper pipe kit, cutting/drilling holes on the wall for passing gas pipes, fixing suitable size PVC pipe on the wall through the holes and making good the wall i/c painting to give an even look and smooth finish, wrapping PVC non adhesive white tape over insulation of gas pipe etc. as required and as per the direction of EIC.

Supplying and fixing of 4 KVA Voltage Stabilizer suitable for 1.5 Ton Air Conditioner, Make V- Guard, Model-VND 400 (voltage Range 150V - 285V, 12 Amps) or equivalent etc as requird and as per the direction of EIC.

Supplying and fixing of Pre-fabricated stand for Keeping outdoor units of 1 Ton/1.5 Ton/2 Ton capacity split type AC as required.

Supplying and fixing of Street Light luminaries, 42 Wattage, with pressure die cast aluminium housing,high performance ploycarbonate optices and IP66 ingress protection. Top opening driver cover for easy maintenance. Efficacy 120 Lm/W, with necessary interconnection with 1.5 sqmm FRLS copper wire as required and clamping arrangement with suitable and GI Pipe etc., as required (Equivalent to Bajaj EDGE NXT LED Model No. ENXT P 42L WH PO SD MT)

Fabrication and supplying of steet light pole made out 65 mm dia class B ISI standard GI pipe 6 mtr long earth stud and coupled with 32mm dia 1.2 mtr long "B" class ISI marked (Single Arm) i/c bending the pipe into requried shape and fixed at the top of the pole with necesary GI reducer/coupler/clamps, M.S Base plate 300 mm x 300 mm x 6 mm thick welded at bottom of the pole fixing of SMC box of size 200 x 140 x 95 mm, 4 way connector & 6 amps MCB with clamping arrangement for SMC Box i/c painting with one coat of metalic primer and two coat of synthetic enamel paint as required as per direction of Engineer-in-charge.

Errection of metallic pole upto 6.5 mtrs at a depth of 1 mtr below G/L in cement concrete (1:3:6) foundation of size 40mm x40mm and 0.50 mtr above G/L for providing collor with plastering including excavation and refilling etc as required.

Supplying and fixing of Post of Lantern luminaries, 15 Wattage, IP 65 LED, energy saving, environmental friendly, spun aluminium landscape luminaire, necessary clamping arrangement etc., as required (Equivalent to Make : Havells Model No. Coral LED Post Top CORALMINIPT15WLED830PSYMTOPC)

Fabrication and supplying of Pole for Post of Lantern made out 50mm dia class B ISI standard pipe 3 mtr length, MS Base plate 300 mm x 300 mmx 6 mm thich welded at bottom of the pole fixing of SMC box of size 200x140x95mm, 4 way connector & 6 apms MCB clamping arrangement for SMC box i/c painting with one coat of metalic primer and two coat of synthetic enamel paint as required as per direction of Engineer-in-charge.

Errection of metallic pole upto 3 mtrs at a depth of 0.5 mtr below G/L in cement concrete (1:3:6) foundation of size 40mm x40mm and 0.50 mtr above G/L for providing collor with plastering including excavation and refilling etc as required.

Supplying of following XLPE insulated heavy duty armoured aluminium conductor UG cable of 1.1 KV grade conforming to IS: No. 7098 (Part-I) 1988 as applicable. Make: Havells and should be NABL certified or equivalent to Polycab /Finolex etc. as required.

10 Sqmm x 3.5 Core

6 sqmm 2 core

Supplying and laying of following size DWC HDPE pipe ISI marked alopng with all accessories like socket, bend couplers etc. conforming to IS 14930, Part - II complete with fitting and cutting, jointing etc direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc. complete as required.

50 mm dia (OD-50 mm & ID - 38 mm nominal)

40 mm dia (OD-40 mm & ID - 32 mm nominal)

M/s Mani Enterprises (BID ID -45397)

SARAVANA TRADING COMPANY (BID ID -45482)

M/s G K Construction (BID ID -45458)