Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹33.0 LAccepted-AOC | L1 | Accepted-AOC Lowest bid found in order | |
| 2 | L2₹34.6 L+₹7,947.40 (0.23%)Rejected-AOC | L2 | Rejected-AOC Other than Lowest bid | |
| 3 | L3₹35.6 L+₹1.0 L (3.02%)Rejected-AOC | L3 | Rejected-AOC Other than Lowest bid | |
| 4 | L4₹37.4 L+₹2.9 L (8.35%)Rejected-AOC | L4 | Rejected-AOC Other than Lowest bid |
Tender Value
Refer Docs
EMD Value
₹64,000
Closing Date
17 Jul 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE 874 EWS C/O 56 APO
GE 874 EWS C/O 56 APO
PROVN OF COOK HOUSE AND SPL REP TO BLDG NO T 72 FOR CHAMKOT AND BLDG NO TTG 48 FOR BAGHBELLA AT TANGDHAR
2023_MES_604105_1
GE 874/EWS-35/2023-24
Open Tender
Civil Works
Item Rate
180 days
Kupwara
As per NIT and tender documents
7 documents required · 7 mandatory
₹500
Yes
GE 874 EWS
₹64,000
Yes
4 Aug 2023
19 Jun 2023
18 Jul 2023
19 Jun 2023
17 Jul 2023
3 Jul 2023
19 Jun 2023 - 26 Jun 2023
Amount
BR and EM Portion
Surface excavation not exceeding 30cm deep and averaging 15 cm deep and getting out in any type of soil, complete all as specified and directed.
Excavation in trenches n exc 1.5m wide and n exc 1.5m in depth for foundation etc n exc 10 sqm on plan and getting out in any type of soil all as specified and directed
Returning filling in including spreading leveling watering and well ramming in layers n exc 25cm all as specified and directed
Removal of excavated materials n. exc 50m and depositing where directed at a level n exc 1.5m above the starting point complete all as specified and directed.
M&L for plain Cement concrete 1:4:8 type D2 (using 40mm graded stone aggregate) in sub basefilling and mass concrete all as specified and directed
M&L hardcore ( broken stone or boulders) of gauge n exc 63 mm deposited spread and leveled in layers n exc 15 cm thick watered and rolled / rammed to a true surface all as specified and directed
M&L for 75 mm thick plinth protection in/Subbase PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) complete all as specified and directed.
M&L Brick work with sub class 'B' brick straight or curved on plan exc 6m mean radiaus built in cement mortor 1:6 all as specified and directed.
M&L for 15mm thick cement plaster in CM 1:6 other than fair faces of brick work /concrete surfaces of wall etc , finishing the surfaces fair and even (without using extra cement) complete all all as specified and directed.
M&L for 15mm thick rendering on fair faces of brick work/concrete surfaces in CM 1:4 finishingthe surface fair & even (without using extra cement) complete all as specified and directed.
M&L two coats of oil emulsion distempering over a coat of priming plastered and other surfaces with alkali resistant priming paint to new plastered surfaces of wall including preparation of surfaces complete all as specified and directed.
M&L for preparing newly plasterd surfaces of wall including priming the plastered surfaces and applying two coats of cement based paint complete all as specified.
Supply and fixing 10 mm dia and over mild steel TMT bars, cut to length, bent to shape required cranking bending and binding with and including mild steel wire annealed not less than 0.90 mm dia.all as specified and directed.
All as per item above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders all as specified and directed.
M&L RCC Design Mix M-30 as in Slabs supported on walls, beams and columns in floors ,roofs, landings, balconies,canopies,deck slabs and in shelves and the like all as specified and directed
M&L RCC Design Mix M-30 as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs,under-reamed piles and mass concrete all as specifed and directed.
M&L RCC Design Mix M-30 as in Columns, pillars, piers, posts and struts all as specifed and directed.
Form work to soffits of suspended slab, roof beam haunching girder bressumers , lintels such as roof slabs, floor slabs, landings and similar work, n exc 200mm thick (Horizontal or sloping) complete all as specified and directed.
Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified.
Formwork to sides of pillars ,posts struts piers coloumns of square or rectangular and stanchions complete all as specified and directed.
M&L for 25mm thick cement concrete type B-1, 1:2:4 (using 20mm graded aggregate) as in floor/sub base complete all as specified and as directed.
M&L for 15 mm thick screed bed in cement mortar 1:6 for laying floor finishes complete all as specified and directed.
Glazed ceramic coloured tiles (450x350mm) x 7mm thick, as in vertical surfaces such as in skirting and dado etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 10mm thick back coat layer in cement mortar 1:4, complete all as specified and directed by Engr-In-Charge.
M&L Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.
M&L for granite tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing types including 15 mm thick bedding layer in CM 1:6
S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick ,coloured having tensile strength of 550Mpa as in roof covering/cladding to wall/in ceiling, fixed with tapping screws all as specified
All as per item above but plain sheet all as specified.
M&L for 6mm thick plywood (5 Nos of ply) grade BWR type BB fixed with nails to timber frame works, fixed in lining/walls comjplete all as specified.
Plain fillets rectangular or triangular in section clean sawn secured with nails or brads exceeding 3 sqcm & n exc 6 sqcm, second class soft wood (Kail) clean sawn complete all as specified.
S&F Mild Steel Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats etc required for fixing, confirming to Fe410-W (Grade E-250) quality 'A' complete all as specified.
S&F Mild Steel framed bracket of angle or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary gusset plates, riveting, etc n.exc 10 Kg each brackets confirming to Fe-290, Gde-E-165
M&L Second class softwood as in scantling, clean sawn fixed in position with nails, unframed work, complete, all as specified and directed.
S&F for 2nd class soft wood, plain, solid, straight chowkats or frames, wrought framed rebated on the solid, rouned or chamfered, put together with glue pinned at joints all as specified.
M & L plain framed paneled shutter 2nd class soft wood 35mm thick (any number of panel) with panel of timber flat on both sides (feather edged) or of veneered particle board medium density, wood particle board with commercial face veneers supplied and fitted to chowkhats 35mm thick second class soft wood (Kail) complete all as specified and directed.
Glazed and Skelton shutters open rebated and prepared to receive glass, gauge etc (with sash bar) edges of framing plain chamfered or rounded fitted with cut and mitered beads for securing glass etc supplied and fixed to chowkhat, 30mm thick shutter for window and ventilator as specified in SSR Part-I , Section-8, clause 8.24 (b).
S&F Sheet glass ordinary quality 3mm thick, glazing with oil putty or wooden beads in squares not exceeding 0.50Sqm in each pane, in repairs, complete all as specified and as directed.
Galvanised mild steel wire cloth 0.56 nominal dia of wire and average width of aparture 1.18mm and fixed with tinned tacks or galvanised wire staples, fixed in repairs, complete all as specified and directed.
S&F for 100mm long stainless steel butt hinges medium weight cold rolled all as specified and directed by Engineer-in-Charge.
M&L for Aluminium handles cast type anodised 100mm long
M&L M&L for Aluminium alloy, anodised sliding door bolt 200mm long.
S&F Mild steel butt hinge medium witht cold rolled 75mm size
S&F Mild steel opressed handle, oval ltype stove enamelled, black size of handle 150mm
S&F Mild steel tower bolt stove enmelled black 150mm long black with bright bolt and fixed
S&F Mild steel tower bolt stove enamelled black 100mm long black with bright bolt and fixed.
M&L Two coats of synthetic enamel paint including cleaning dusting of new or previously untreated wood of ply wood base surfaces for wall, door,window,ventilator and ceiling not otherwise described over 10cm width or girth complete all as specified and as directed by Engr-in-Charge.
M &L 1000 ltr capacity rotational moulded polythylene water storage tanks (Cylinderical vertical with closed top) and fixed in position, all as specified in SSR Part-I, including fixing of float valve, complete all as specified and directed.
S&F Stop/Angle valve 15mm bore, cast copper alloy, chromium plated, screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for unions all as specified.
S&F Bib tap cast copper alloy chromium plated fancy type with crutch of butterfly handle, screwed down, screwed for iron pipe of for brass ferrule of 15mm bore (ISI marked).
M&L Lagging to pipes 15mmdia used in internal water supply or plumping all round with,25mm thick bonded mineral wool preformed 'SNAP ON' pipe sections of density 144 kg/cum conforming to IS-9842
M&L Lagging to pipes 20mm dia used in internal water supply or plumping all round with,25mm thick bonded mineral wool preformed 'SNAP ON' pipe sections of density 144 kg/cum conforming to IS-9842
S&F in Gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe and fixed with 20mm dia
S&F PVC (SWR) floor trap 75mm dia outlet, plain with grating including jointing with solvent cement
S&F 75mm bore PVC (SWR) pipe single socket in any length with rubber ring jointed, fixed to wall or laid in floor etc complete all as specified.
S&F 75mm bore PVC (SWR) bend or tee or radius complete all as specified.
S&F PVC connection 15mm dia and 600mm long with PTMT nuts and washer complete all as specified.
S&F 110mm bore PVC (SWR) pipe single socket in any length with rubber ring jointed, laid in floor /fixed to wall complete all as specified.
S&F 110mm bore PVC (SWR) bend or tee or radius complete all as specified.
S&F PVC gully trap square or round mouthed type (P) , size of trap 125x 110mm and jointing to drains with solvent cement in repairs complete all as specified.
S&F 15mm Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified.
S&F vitreous china wash basin, white, flat back, size 550x400mm excluding taps , but including waste coupling& waste pipe , brackets etc required for fixing the WHB all as specified.
S&F sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing in slab and including waste coupling and 40mm pvc pipe connecting to floor trap etc, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.
S&Fsteel water tubing 20mm bore of tube, medium grade galvanized with all fittings and fixed complete to walls, ceilings or laid in/on floors, complete all as specified.
S&F GI steel water tubing 15mm bore of tube, medium grade galvanized with all fittings and fixed complete to walls, ceilings or laid in/on floors complete all as specified.
Demolition of cement concrete (Un-reinforced) in ground floors and paving n.exc 15 cm thickness below or above ground level complete all as specified.
Dismantling wrought iron or mild steel /angle work of any description or in any position complete all as specified.
Dismantling wall and ceiling board of any description including cover fillets complete all as specified.
Dismantling of timber scantlings 40 sq cm and over in sec, in any position, in unframed/framed work complete all as specified.
Dismantling plain or corrugated steel sheeting any gauge thickness in roof covering/wall etc complete all as specified.
M & L for second class soft wood as in scantling clean sawn fixed in position but except wood.
M&L for preparation of old/new steel surfaces of any description, over 10cm in width or girth,not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed
M&L for preparation of old/new surfaces of plaster/concrete/plain asbestos cement surfaces etc of any description, over 10cm in width or girth,not otherwise described and applying two coats of cement based paint complete all as specified and directed
Taking down chowkhats or frame exc. 1.5sqm and n.exc. 4 sqm each with shutter (without taking out shutters from the frame) complete all as specified.
S&F 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed
S&F 200mm long aluminium alloy, anodised barrel tower bolt of extruded section complete all as specified.
S&F 100mm long aluminium alloy, anodised barrel tower bolt of extruded section complete all as specified.
S&F 250mm long aluminum alloy anodized sliding door (bolt type) and fixing clips of sheets, cast of extruded sections and fixing bolts and sliding bolts of extruded section of cast-aluminum alloy.
S&F aluminum handles, cast type, anodized 150mm long complete all as specified.
M&L Non skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 sqm and n.exc 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the existing surface, complete all as specified and directed.
M&L for 6mm thick veneered decorative plywood (05 Nos of ply) grade-01 (with BWR resin) with decorative face veneers on the one face fixed with nails to timber frame works fixed in wall/linings complete all as specified.
M&L for 6mm thick veneered decorative plywood (05 Nos of ply) grade-01 (with BWR resin) with decorative face veneers on the one face fixed with nails to timber frame works fixed in ceiling etc complete all as specified.
M&L for 75mm thickplain Cement concrete 1:4:8 type D2 (using 40mm graded stone aggregate) in sub base flooring all as specified and directed
M&L for Chequered cement concrete tiles 20 cmX20 cmX25 mm thick sat jointed and pointed in neat cement slurry in floor with grey cement and no pigments with 1:4, 25 mm thick screed bed complete all as specified.
Hacking out old broken glass (any thickness, size, quality or description) from any type of frames or stone, concrete or brick surrounds etc , glazed with putty or fixed with beads complete all as specified and as directed
Taking down chowkhats or frame n.exc. 1.5 sqm each with shutter (without taking out shutters from the frame) complete all as specified.
M&L applying there coats of white washing including preparation of newly plastered surface of wall.
Demolition of brick or stone masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work, complete all as specified and directed.
Walling of random rubble stone uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:6 complete all as specified and directed.
Description all as per item above but except stone all as specified and directed.
Taking down copper/aluminium point wiring ( light fan, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc removing material to store for keeping in safe custody or for taking credit and making good distribued surface of wall, floor etc complete all as specified and directed.
Point wiring for one light point/Ex/fan point controlled by one switch with 1.5 sqmm PVC FRLS insulated un-sheathed copper conductor single core multi strand cable and 1.5 sqmm PVC FRLS insulated un-sheathed copper conductor single core multi stranded cable (green color) as earth lead in and including cable 1100 volts grade including 25mm casing and capping (ISI marked) for one light/ fan point controlled by one switch including CI/MS sunk box of required size, & as directed by Engr in Charge including 3mm thick plastic laminated top sheet cover, including cutting chases to wall and making good the disturbed surfaces to match with the existing specification complete all as specified.Make : Finolex/Anchor/Polycab
Point wiring for 3 pin 5A socket outlet independent point controlled by one switch with 1.5 sqmm PVC FRLS insulated un-sheathed copper conductor single core multi strand cable and 1.5 sqmm PVC FRLS insulated un-sheathed copper conductor single core multi stranded cable (green color) as earth lead, 1100 volts grade including 25mm casing and capping (ISI marked) for one light/ fan point controlled by one switch including CI/MS sunk box of required size, & as directed by Engr in Charge including 3mm thick plastic laminated top sheet cover, including cutting chases to wall and making good the disturbed surfaces to match with the existing specification complete all as specified.Make : Finolex/Anchor/Polycab
Point wiring for 3 pin 5A socket outlet on the same board controlled by one switch with 1.5 sqmm PVC FRLS insulated un-sheathed copper conductor single core multi strand cable and 1.5 sqmm PVC FRLS insulated un-sheathed copper conductor single core multi stranded cable (green color) as earth lead, 1100 volts grade including 25mm casing and capping (ISI marked) for one light/ fan point controlled by one switch including CI/MS sunk box of required size, & as directed by Engr in Charge including 3mm thick plastic laminated top sheet cover, including cutting chases to wall and making good the disturbed surfaces to match with the existing specification complete all as specified.Make : Finolex/Anchor/Polycab
Point wiring for one 3 pin 15 Amps socket outlet/sheet metal enclosure independent with 4.00 sqmm PVC insulated un-sheathed copper conductor single core multi strand cable and 2.5 sqmm PVC insulated un-sheathed copper conductor single core cable (green color) as earth lead in and including 25mm PVC caping casing medium grade with all fittings (ISI Marked) controlled by one switch including CI/MS sunk box of required size, & as directed by Engr in Charge including 3mm thick plastic laminated top sheet cover, including cutting chases to wall and making good the disturbed surfaces to match with the existing specification complete all as specified.Make : Finolex/Anchor/Polycab
M&L for LED Tube light fitting of 1x20 W for Decorative ultra slim square profile with extruded polycarbonate, environmental friendly, energy efficient ready to use pack of LED Pride Plus NEO and connecting electrically using PVC insulated and overall sheathed flexible copper conductor cable of size 0.75 sqmm 3 core all as required at site or directed by Engineer-in-Charge.Make :Havells Batten Cat part No LHEXACP7IN1W020 or equivalent ISI Marked company.
S&F Switch piano type flush 6 Amp Single pole one way ( ISI Marked) complete all as specified and directed. Make : Havells/Anchor
S&F Switch socket combination 5 in 1, 5 and 15 Amp flush type universal controlled by one switch (ISI marked) complete all as specified and directed. Make : Havells/Anchor
S&F Socket outlet 2 in1, 3 pin 5 Amps flush type complete all as specified and directed.Make : Havells/Anchor
S&F ceiling rose surface backelite 65x50mm two to three terminal (ISI marked).Make : Havells/Anchor
Supply and fixing lamp holder bracket type, PVC/polycarbonate type with skirt cap suitable for batten fittings, complete all as specified and direted.Make : Havells/Anchor
Supply and fix LED Bulb 9 Watt for Item No.12 Above . Make Havells/Bajaj
Supply and fix surface mounted decorative bulk head edge -lit LED Luminaire comprsing of high brightness LEDs of 1x10 W LED having PF not less than 0.9 all as specified and directed. Make - Havells cat part No LHEOAOP7UZ6W010 & equivalent.
S&F RCBO, single pole and neutral (SPN) 30mA, 240V , 32 Amp all as specified and directed. Make- Havelles/MDS/Legrand.
S & F of MCB SPN, 240 volt, 32 Amp capacity, 30mA, all as specified and as directed by Engr -in-Charge.
S&F MCB 'C' series, single pole 240V , 6 to 32 Amp all as specified and directed. Make- Havelles/MDS/Legrand.
Supply & fix sheet metal enclosure MCB distribution board. Single pole & neutral 240 volts 12 way with IP-43 IK-09 protection double door complete with appropriate size bus bar and neutral link, conf to Cat Pt No 6077 11 of Legrand or equivalent of make Hager/Merlin Garin fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification .
Supply & fix sheet metal enclosure MCB distribution board. Single pole & neutral 240 volts 8 way with IP-43 IK-09 protection double door complete with appropriate size bus bar and neutral link, conf to Cat Pt No 6077 11 of Legrand or equivalent of make Hager/Merlin Garin fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification .
Supply & laying of PVC flat twin core cable of 1100 Volts grade with stranded aluminium conductor of size 10.0 sq mm 2 core complete all as specified and directed.Make Havells/Polycab/Gloster
Earthing complete with galvanised steel earth plate electrode 60cmx60cmx6.3cm thick burried directly in ground ( earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5m below normal ground level, connected to galvanised iron wire 4.0mm dia by means of bolts, nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 connected to earthing test all as specified or indicated including testing on completion.
Supply & Fixing of Electronic Voltage Stabilizer of 6.6 KVA, 30 Amp, working range 110-290 Volts, Model No VGMW 1000 Plus all as specified and directed by Engineer-in-Charge.
Supply and fixing Water heater storage type, electric,capacity 25 litres alongwith all accesories BEE 5 star rated Puro Turbo DX Lovry Pink colour Make Havells product code No GHWAPXTIV025 or /Bajaj/Philips or equivalent make as approved by Engr-in-Charge.
Cutting of existing steel tubing 25/ 20mm bore for alteration or additions and insertion of New Tee of suitable size for connection to GI pipe union, Nipple / socket all as specified and as directed.
patriotic builders
Mir Hussain and sons
M/S GHULAM RUBANI & SONS
Bidder Name
patriotic builders
M/S WALI AHMED AND SONS
M/S GHULAM RUBANI & SONS
Mir Hussain and sons
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.PDF
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .