REPAIR TO STEEL FURNITURE AND REPAIR CONVERSION OF GI CHARPOY WITH NEWAR TOP TO GI CHARPOY WITH PLYWOOD TOP UNDER BSO OF GE SUKNA

Amount

Supply & replacement of following unserviceable items of Almirah steel (1270 x 765 x 440 mm)complete all as shown in drawing and as directed. (Drg No. - FD-67, FD-243 & FD-1032)

Chromium plated handle

Base made out of 1mm thick MS sheet channel with ends covered and including spray paint with 2 coats of synthetic enamel paint over a coat of primer.

Lock 50 mm, 4 lever with duplicate keys

Shelf made out of 914 mm x 450 mm & 1 mm thick MS sheet and including spray paint with 2 coats of synthetic enamel paint over a coat of primer.

Refixing of existing shutter / shelf with necessary welding as required

75 mm MS hinges and including spray paint with 2 coats of synthetic enamel paint over a coat of primer.

Supply & replacement of following unserviceable items of Chair CB with / without arms complete all as shown in drawing and as directed. (Drg No. - FD-75)

Welding of seat frame with legs of chair CB without arms.

MS flat iron 25 x 3 mm of 50 mm length and including welding & spray paint with 2 coats of synthetic enamel paint over a coat of primer.

Seat frame made out of teak wood and including two coats french polish and canning for chair CB with arms complete.

Back frame made out of teak wood and including two coats french polish and canning for chair CB with arms complete.

Seat frame made out of teak wood and including two coats french polish and canning for chair CB without arms complete.

Back frame made out of teak wood and including two coats french polish and canning for chair CB without arms complete.

Hand rest made out of teak wood and fixed with screws and including two coats french polish for chair CB with arms complete.

Fixing only existing serviceable arms with new screws and including one coat french polish for chair CB with arms complete.

Hard rubber shoes

Supply & replacement of following unserviceable items of Chair verandah complete all as shown in drawing and as directed. (Drg No. - FD-19 & FD-256)

Welding in joint of the seat frame with legs

Removing unserviceable plastic cane & including re-canning in true Godrej pattern with 1st quality 2 to 2.5 mm wide and half round oval shape virgin plastic cane of white colour. The border of seat / back shall be weaved with 4 mm wide 1st quality virgin plastic cane (white colour) complete all as specified and directed:- Note: The re-canning shall be carried out only after finishing painting of item as required.

Hard plastic shoes

Supply & replacement of following unserviceable items of Teapoy verandah complete all as shown in drawing and as directed. (Drg No. - FD-383)

Top made of 18 mm thick prelaminated particle board, one side prelaminated with decorative choice lamination and other side balancing white lamination with teak wood edging all round and including two coats french polish complete.

Hard rubber shoes

Supply & replacement of following unserviceable items of Chair CB with arms (Cushion padded seat & back) complete all as shown in drawing and as directed. (Drg No. - FD-75)

Seat made out of padded cushion with rexine cover.

Back made out of padded cushion with rexine cover.

Hand rest made of 2nd class hard wood frame & padded cushion with rexine cover.

Supply & replacement of following unserviceable items of Locker steel complete all as shown in drawing and as directed. (Drg No. - FD-257 & FD-1029)

Chromium plated handle

Legs made out of 1mm thick MS sheet and including spray paint with 2 coats of synthetic enamel paint over a coat of primer.

Chromium plated hasp and staple of size 100 mm

300 mm long chromium plated hanging rod of 20 mm dia & 1.6 mm wall thickness

Lock with duplicate keys

Supply & replacement of following unserviceable items of Almirah small steel (1/2 Hanging & 1/2 Shelving) complete all as shown in drawing and as directed. (Drg No. - FD-114 & FD-1034)

Chromium plated handle

Base made out of 1mm thick MS sheet channel with ends covered and including spray paint with 2 coats of synthetic enamel paint over a coat of primer.

Lock 50 mm, 4 lever with duplicate keys

Supply & replacement of following unserviceable items of table officers steel complete all as shown in drawing and as directed. (Drg No. - FD-1003)

Leg made out of 25 mm MS hollow square tube of 1.6 mm wall thickness and including spray paint with 2 coats of synthetic enamel paint over a coat of primer.

Long rail made out of 25 x 40 x 1 mm mild steel 'U' section and including spray paint with 2 coats of synthetic enamel paint over a coat of primer.

Short rail made out of 25 x 40 x 1 mm mild steel 'U' section and including spray paint with 2 coats of synthetic enamel paint over a coat of primer.

Drawer small and including spray paint with 2 coats of synthetic enamel paint over a coat of primer.

Top made of 18 mm thick prelaminated particle board, one side prelaminated with decorative choice lamination and other side balancing white lamination with teak wood edging all round and including two coats french polish complete.

Lock with duplicate keys

Hard plastic shoes.

Supply & replacement of following unserviceable items of Table clerk complete all as shown in drawing and as directed. (Drg No. - FD- 84 & FD-381):-

Leg made out of 25 mm MS hollow square tube of 1.6 mm wall thickness and including spray paint with 2 coats of synthetic enamel paint over a coat of primer.

Long rail made out of 25 mm MS hollow square tube of 1.6 mm wall thickness and including spray paint with 2 coats of synthetic enamel paint over a coat of primer.

Short rail made out of 25 mm MS hollow square tube of 1.6 mm wall thickness and including spray paint with 2 coats of synthetic enamel paint over a coat of primer.

Drawer and including spray paint with 2 coats of synthetic enamel paint over a coat of primer.

Top made of 18 mm thick prelaminated particle board, one side prelaminated with decorative choice lamination and other side balancing white lamination with teak wood edging all round and including two coats french polish complete.

Locks with duplicate keys

Hard plastic shoes

Supply & replacement of following unserviceable items of charpoy GI pipe complete all as shown in drawing and as directed. (Drg No. - FD-220)

Charpoy top made out of 12 mm thick plywood, BWR grade

Stiffner made out of 40 x 6 mm MS flat iron of 85 cm (+/- 2 cm) length with three holes of required size and including necessary screws / nuts, bolts & including spray paint with 2 coats of synthetic enamel paint over a coat of primer complete.

long rail made out from 32 mm bore GI pipe, medium grade, length as shown on drawing, both end threaded and including dismantling old long rail from charpoy.

Fixing only short rail made out from 32 mm bore GI pipe, cutting to length as shown on drawing, both ends threaded and including dismantling old short rail from charpoy Note:- Serviceable quantity of GI pipe obtained from dismantling of long rail shall be reused under this item by cutting the same to length of short rail.

Fixing only legs made out from 32 mm bore GI pipe, cutting to length as shown on drawing, one end threaded, supply and welding of 3 mm thick and 50 mm dia MS base plate at bottom of leg, 2 Nos. 25 x 3 mm flat iron made to shape of 15 mm dia clamp & welded to face of leg, one 16 gauge washer welded to bottom of lower clamp for fixing MNF set and including painting clamp & base plate with two coats of synthetic enamel paint over a coat of red oxide primer & dismantling old leg from charpoy Note:- Serviceable quantity of GI pipe obtained from dismantling of short rail shall be reused under this item by cutting the same to length of legs.

3 way GI elbow suitable for 32 mm bore GI pipe rails and including taking down.

6 mm thick GI check nut suitable for 32 mm bore GI pipe rails and including taking down

Wooden block at bottom of legs. made out of 2nd class hardwood.

Conversion of charpoy newar to charpoy plywood top in following steps complete all as shown in drawing (Drg No. - FD-220) and as directed :- (i) Taking down old torn nylon newar from existing GI charpoy and including removing complete. (ii) S&F of 3 Nos. stiffener made out of 40 x 6 mm MS flat iron of length 85 cm (±2 cm) by welding between both long rails of charpoy (one in the centre and other two at 6" distance from each short rails). 3 Nos. hole of 10 mm dia shall be provided on each stiffener (one hole in centre and one on both side of centre hole at a distance of 12") for fixing of plywood at top and stiffeners fit tight against the inner walls of both long rails & upper face of stiffeners & upper crest long rails remains at same level. (iii) S&F 12 mm thick, 7 layer, BWR grade plywood of size 6'6" x 3' at top of charpoy to the holes made on the MS flat iron stiffener with countersunk flat head screws / locks, nuts and bolts of suitable size. Corners of plywood shall be rounded off and suitably holed with rose bit to prevent heads of nuts / bolts from protruding out in case bolts other than flat head bolts are used. All four corners & bottoms of plywood to be chiselled / suitably sheared off to the extent to ensure housing of raised portion of elbow and check nuts, to make the plywood sit flat on rails & stiffener evenly throughout.

M&L preparation of old painted steel surfaces of any description, width or girth, and including spray paint with one coat of synthetic enamel paint of approved colour for the following furniture items complete all as specified and directed:-

Almirah steel (1270 x 765 x 440 mm) (Drg No. - FD-67, FD-243 & FD-1032)

Almirah small steel (1/2 Hanging & 1/2 Shelving) (Drg No. - FD-114 & FD-1034)

Almirah large steel with shelves (Drg No. - FD-67 7 FD-1031)

Book case steel (Drg No. - FD-90, FD-1028)

Book shelf open (small) steel (Drg No. - FD-69)

Book shelves open (large) steel (Drg No. - FD-69)

Locker steel (Drg No. - FD-257, FD-1029)

Rack stationery steel (Drg No. - FD-81)

Rack steel 1830 x 760 x 1905 (Drg No. - FD-129)

Table with drawer steel 900 x 600 x 760 (Drg No. - FD-1008)

Table clerk (Drg No. - FD-381)

Table officers steel (Drg No. - FD-84, FD-1003)

Table for typing steel (Drg No. - FD-1006)

Chair CB without arms (Drg No. - FD-75)

Chair CB with arms (Drg No. - FD-75)

Chair CB with arms (Cushion padded seat & back) (Drg No. - FD-75)

Chair Verandah (Drg No. - FD-19, FD-256)

Teapoy verandah (Drg No. - FD-383)

KAMLESH TRADING CO

M. K. ENTERPRISES

Shri Gajanand Enterprises

Janata Enterprises

JSM FURNITURE

M/S B B CONSTRUCTION

SHRI R N SAHA

M/S K P S CONSTRUCTIONS

M/S B K ROY