SPECIAL REPAIRS TO LIVING IN SNCOS AND SNCOS TD BLOCK (TOILET AND BATHROOM) AT 19 WING AF UNDER GE (AF) BORJHAR

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises, complete all as specified & directed.

Taking down cement plaster or cement lime plaster on PCC/stone surface/brick surfaces including raking out joints hacking for key scrubbing down with water etc, complete all as specified & directed.

M&L for non skid ceramic tiles (coloured) 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar (1:6), complete all as specified and directed.

M&L for glazed ceramic tiles (coloured)of size 350mm x 250mmx6-7mm /450x 350x6 to 7mm thick on vertical surfaces such as dado, skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 10mm thick rendering (as screed bed) in cement & sand mortar (1:4), complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar 1:4 on fair face of brick work of walls or on concrete surfaces, mixed with water proofing compound (ISI marked) @ 3% of weight of cement or as per manufacturer’s instructions, finished even & smooth without using extra cement, complete, all as specified & directed . Note : - Supply only water proofing compound shall be measured and paid for separately.

Supply only water proofing compound. ISI marked

Taking down chowkhat or frame (without taking off shutter from the frame) but exceeding 1.5 Square Metre and not exceeding 04 Square Metre each complete all as specified and as directed.

S&F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm wood grain printed PVC sheet reinforced with MS square tube and edges will be painted to match will printed sheet fixed in opening as per specification & drawings complete all as specified and as directed.

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame including hinges, tower bolts etc at site as per specification & drawing.

S&F in repairs vitreous china wash hand basin, white, flat back of size 550mm x 400mm with & including a pair of cast iron brackets embedded in PCC 1:3:6 type C1 blocks of size 10x7.5x15cm, 32 mm dia PVC waste pipe and 32mm bore chromium plated brass waste fitting with long screwed shanks and fly nuts, flange end bedded in red lead cement & other end fixed, (excluding tap, waste chain & plug), complete all as specified & directed.

S&F in repairs vitreous china urinal, full stall type, white including providing & fixing plugs, bedding urinal against wall in cement mortar (1:2), securing urinal to plugs with & including 60 mm long brass screws, pointing around urinal back in cement, with & including PTMT grating and union for discharge pipe including waste pipe of polythelene of low or high density or PVC 32mm dia, complete all as specified & directed.

S&F in repairs vitreous china wash down water closet pan (Pedestal pattern), white, including connection to drain (or outgoing pipe) and to flushing pipe, anti-sypohonage pipe etc., with plastic WC seat cover (white) closed pattern with flat bottom and cover and mild steel chromium plated or aluminized hinging device, complete all as specified & directed.

S&F in repairs waste coupling of PTMT (half or full threaded) suitable for WHB/Sink, bore dia of discharge pipe 32mm (Minimum weight 45gms), complete all as specified & directed.

S&F in repairs PVC valveless symphonic action type low level flushing cistern (ISI marked) of 10 litre capacity including 32 mm dia PVC flush pipe connected to water closet with inlet, ball valve, float and handle, complete all as specified & directed.

S&F in repairs 15mm bore Stop valve, cast copper alloy, fancy type chromium plated, screwed down, high pressure with capstan heads, screwed both ends for iron pipe or for union, complete all as specified & directed.

S&F in repairs 15 mm bore bib tap, cast copper alloy, chromium plated, fancy type with capstan head, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified & directed.

S&F in repairs 15mm bore fancy type pillar tap, cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks & fly nuts, screwed for iron pipes, complete all as specified & directed.

Taking up or down steel water tubing and connections of 15mm bore, fixed in walls, ceiling, floors, trenches etc., complete all as specified & directed.

M&L for galvanized steel water tubing medium grade of 15mm bore with & including all fittings and fixed complete to walls and ceillings or laid in floors complete all as specified and directed.

S&F in repairs sheet glass shelf assembly with chromium plated bracket guard and railing fixed on wall with PVC rawl plug & cadmium plated brass screws, complete all as specified & directed. Make: Cera Cat No. 108 or Equivalent make as per list of make attached in Particular specification.

S&F in repairs tubular towel rail, aluminium anodized, 20mm dia, ‘D’ type, 60cm long between flanges, fixed to PVC rawl plugs with chromium plated brass screws, complete all as specified & directed. Make: Cera Cat No. 101 or Equivalent make as per list of make attached in Particular specification.

S&F in repair squatting pan viteous china" pattern of size 580x440mm " white with integral foot rest (excluding flushing cistern and flush pipe) including provision of cement concrete bedding connection to trap and to flushing pipe, anti-syphonage pipe etco complete making good to floor complete.

S&F in repairs hand shower (Health faucet) with 8 mm dia, 1 metre long flexible tube and wall hook with NRV (Black flow preventor) (Make Jaquar, Cat No ALD CHR -583). Complete all as specified.

S&F in repairs brass chromium plated shower rose 125mm size with or without swivel joints any size , including fixing to steel pipe complete all as specified and directed by Engineer-in-charge.

Dismentlimg of water tank exc 500 & n.exc 1000 and removing from the site completed all as directed by engr-in-charge

S&F 1000 Litre capacity Rotational moulded polyethylene water storage tank, triple layered (cylindrical vertical with closed top) ISI marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. complete as specified in SSR Part-I.

Dismantling of wall and ceiling boards (fiber, pulp, insulation etc.) or insulation boards / slabs / blankets, any thickness including cover fillet complete all as specified and directed by Engineer-in-charge.

M&L for Provision of perforated/ semi-perforated of 9mm thick ceiling tiles size 595mmx595mm for insulation and acoustic purpose including aluminium anodised section of size, wall angle 30mm x 25mm x 2mm thick, main / cross tee-section 15mm x 15mm x 1.4mm and suspended with 2.18 mm thick GI wire of suitable length and including fixed & aluminium snap grid all as per clause 10.38.1 of SSR Part-I and as per manufacturer’s instructions. complete all as specified and as directed by Engineer-in-Charge. Make :--(i) Aluminium section : -- INDALCO/ HINDALCO/ JINDAL (ii) Perforated/Semi perforated tiles :-- ARMSTRONG/ LAFARG

M&L for preparing new undecorated plastered wall surfaces by rubbing down and applying two coat cement base paint over a coat chalk whiting complete all as specified and directed by Engineer-in-charge.

Taking down chowkhat or frame (without taking off shutter from the frame) not exceeding 1.5 Square Metre each , removing from the site including cutting holes required for taking out existing hold fast etc. complete all as specified and as directed.

S&F 2nd class hard wood plain ,soild straight chowkats and frames of wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints.

S&F Glazed and skelton shutters, 35 mm thick of Second class hard wood open rebated and prepared to receive glass, gauge etc without sash bars) edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass, etc, sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24(a) ) including tower bolt , hinges, handle etc complete all as specified and as directed.

S&F 4 mm thick sheet glass , ordinary quality , glazing with oil putty or with wooden beads, area not exceeding 0.50 Square Metre each pane complete all as specified and as directed.

S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples.

Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendents, regulators, sockets, light fittings etc removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc

M&L for one light point wiring controlled by one, one way switch with PVC insulated unsheathed multi stranded copper conductor (FRLS) of size 1.5 Sqmm (for Phase colour code Red/Yellow/blue and for Neutral colour code Black) and one run of size 1.5 Sqmm PVC insulated unsheathed multi stranded copper conductor (FRLS) (as earth wire, colour code green) and connected to common earth dolly, drawn through in and including medium grade PVC conduit in concealed of adequate size but not less than 20mm in width, 1.2mm thick with all fittings and accessories with MS termination board/boxes for mounting switches, sockets, regulators as specified in SSR and as directed by Engineer- in- Charge. NOTE:- After rewiring cutting chasing portion should be matched with existing finishes of walls.

All as per description of serial item No. 37 above but for one fan point controlled by one switch.

All as per description of serial item No. 37 above but for one 5 Amp socket controlled by one switch Independent board.

All as per description of serial item No. 37 above but for one 5 Amp socket controlled by one switch on same board.

All as per description of serial item No. 37 above but for one 3 pin/5/15 Amps switch socket outlet independent but using PVC insulated, unsheathed stranded copper conductor cable of size 2.5 Sqmm and 2.5 sqmm for earth continuity conductor for one 3 pin 5/15 Amps switch socket out let independent. (Power circuit to be taken from MCB DB).

All as per description of serial item No. 37 above but for one 3 pin/5/15 Amps switch socket outlet independent but using PVC insulated, unsheathed stranded copper conductor cable of size 4 Sqmm and 4 sqmm for earth continuity conductor for one 3 pin 5/15 Amps switch socket out let independent. (Power circuit to be taken from MCB DB).

S&F Switch piano flush type single pole one way 5 Amps complete all as specified and directed

S&F Switch piano flush type single pole one way 15 Amps complete all as specified and directed.

S&F Socket outlet, 5 Amps, 5 pin, flush type complete all as specified and directed.

S&F Socket outlet 2 in 1, 5 pin 5/15 Amps, flush type universal complete all as specified and directed.

S&F Switch socket combination 5/ 5A 5in 1 flush type complete all as specified and directed.

S&F switch socket combination 2 in 1, 5 pin 5/15 Amps flush type universal complete all as specified and directed.

S&F ceiling rose, surface, Bakelite, 65x50 mm two to three terminals complete all as specified and directed.

S&F LED mirror light fittings 7 Watt integral polycarbonate LED channel with white acrylic cover 2 ft complete . Make :-Crompton Cat par No LCL-07-CDL or from Equivalent make as per list of make attached in Particular specification.

S&F 20 W LED 6000K Ultra modern recess mounting luminaire suitable for armstrong/grid/POP ceiling complete with separate electronic driver & high brightness SMD LEDs Fixture size 595x595 mm. Make: Bajaj BPRF 20 WH SL LED of from Equivalent make as per list of make attached in Particular specification.

S&F LED tube light fitting. ,1x18 Watt, Box type surface mounted 230 V , 4 ft etc. complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size and including one LED tube, 18 W complete all as directed at site complete. Make - Bajaj -BCLSB 18WH or from Equivalent make as per list of make attached in Particular specification.

Taking down old unserviceable existing sub main wiring of any type/size complete from wall and making good distrubed surface.

Material and labour for sub main wiring with 2 x 6 Sq mm PVC insulated single core unsheathed stranded copper conductor drawn in and including PVC concealed conduit including continuous running earth wire of 6 Sq mm PVC unsheathed single core stranded copper conductor connected to common earth dolly including MS terminal boxes, complete, all as directed.

Taking down of Old U/S DBs including MCB, any type.

S&F vertical type of MCCB DB TPN 4 way IP-43 made of sheet steel phos phatised, powder painted with bus bar, neutral link, earth bar and Din rail ,230 Volts with double door including TP MCCB of 63 Amp, complete, all as directed .

S&F MCB DB 8 way IP-43 made of sheet steel phos phatised, powder painted with bus bar, neutral link, earth bar and Din rail ,230 Volts with double door, complete, all as directed. :Make : Legrand Cat part No 6077 11/ L&T/Schiender.

S&F MCB SPN 240 Volts, 'C' series, breaking capacity 10 KA of rating 63 Amps. Make : Indoasian/ Legrand / L&T/Schiender.

S&F MCB SP 6-32 Amps, breaking capacity 10 KA. Make : Legrand / L&T/Schiender.

Taking down old UNSV Exhaust fan of size 300 mm sweep and keeping safe custody and Refixing after rewinding of Exhaust Fan of complete all as specified and directed.

Taking down old unserviceable Gyser any size and refixing after replacelment of heating element , thermostate and painting complete all as diredcted

S&F Water pressure booster pump of capacity 01 HP including all electric and water connection all as spefied and directed by EIC. Make: Crompton greaves/Kirloskar

Taking up U/S GI water main (including all fitting) complete all as directed and specified for the size 25 mm and 20 mm dia pipe

Supply and laying galvanized iron tubing, medium grade with ISI marked with all fittings and laid in trenches complete all as specified and directrd for the size 25 mm dia, complete, all as specified and directed.

Supply and laying galvanized iron tubing, medium grade with ISI marked with all fittings and laid in trenches complete all as specified and directrd for the size 20 mm dia, complete, all as specified and directed.

S&F cast copper alloy stope valve with iron wheel head screwed both ends for iron pipe of the size 25 mm bore.

S&F cast copper alloy stope valve with iron wheel head screwed both ends for iron pipe of the size 20 mm bore.

S & F PVC connection pipe of 450 mm length suitable for hot and cold water complete all as directed

M&L for Earthing complete withgalvanised earth plate electrode 60 cm x 60 cm x 6.0 mm thick, buried directly in ground(earth pit not less than 2.25 metre below normal groud level) with top edge of the plate not less than 1.5 mtr below ground level, connected to and including galvanised iron earth wire 4mm dia by means of steel bolts, nuts, check nuts and washers and earth copper strip protected with 15 mm bore GI pipe light grade and earth pit surrounded by picked layer of coal dust and common salt, 15cm thick all around bottom and top, watering pipe of 20 mm bore of light grade with funnel all as shown in electrical plate No3 of SSR Part-I (2009) and connecting to earthing test point, main switch board and testing on completion including PCC (1:3:6) type C-2, using 20mm graded stone aggregate as in earthing pit with RCC cover and framing including necessary earth work etc, complete all as specified.

M/s Rawat Enterprises