STRUCTURAL REPAIR INCLUDING PLASTERING AND PERIODICAL SERVICES TO CERTAIN BLDGS IN INS TUNIR AREA AT NAVAL STATION KARANJA

Amount

Preparation of old wall and ceiling surfaces of any description and Material and Labour for applying one coat of acrylic (antifungal) exterior grade paint white or coloured by auto roller complete including removal of nails upto 4th storey including necessary scaffolding etc and grinding where necessary, complete all as specified & directed by Engr-in-Charge.

Material and Labour for Preparation of old decorated plastered and unplastered surfaces of walls and cornices, spoiled by smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots by complete scraping with wire brush and washing with water and applying (multipurpose mixer) wall care putty upto 2 mm thick and applying two coats of acrylic (antifungal) exterior grade paint white or coloured by auto roller by the skilled labour over one coat of primer upto 4th storey including necessary scaffolding and grinding where necessary, complete all as specified & directed by Engr-in-Charge. Note:- Allow 6-8 hrs to dry the surface for painting of subsequent coats complete all as specified and directed.

Preparation of old wall surfaces of any description and Material and Labour for applying one coat of acrylic (antifungal) exterior grade paint of camouflage pattern by auto roller upto 4th storey including necessary scaffolding etc, complete all as specified & directed by Engr-in-Charge.

Complete removal of existing treatment of walls and Material and Labour for applying two coats of acrylic (antifungal) exterior grade paint of camouflage pattern over one coat of primer on wall/roof by auto roller complete upto 4th storey including necessary scaffolding etc, complete all as specified & directed by Engr-in-Charge.

Preparation of plastered old decorated surfaces of walls by all as specified and filling cracks/hole by applying walls putty 1 mm thick (multipurpose mixer will be used for uniform and proper mixing of putty) and Material and Labour for applying one coat of distemper oil emulsion white or coloured by auto roller complete including removal of nails etc and grinding where necessary, complete all as specified & directed by Engr-in-Charge.

Material and Labour for Preparation of old plastered surfaces of walls and cornices, spoiled by smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots by complete scraping with wire brush and washing with water and applying wall care putty upto 2 mm thick (multipurpose mixer shall be used for uniform and proper mixing of putty) and applying two coats oil emulsion distemper white or coloured over a coat of approved primer by auto roller, complete all as specified & directed by Engr-in-Charge. Note:- Allow 6-8 hrs to dry the surface for painting of subsequent coats all as specified & directed.

Material and Labour for Preparation of old decorated plastered and unplastered surfaces of walls and cornices, spoiled by smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots by complete scraping with wire brush and washing with water and applying (multipurpose mixer) wall care putty upto 2 mm thick and applying two coats royale luxury emulsion interior paint a luxurious smooth finish white or coloured over a coat of approved primer with the help of auto roller by skilled labour over one coat of primer upto 4th storey including necessary scaffolding complete all as specified and directed. Note:- 1. Allow 6-8 hrs to dry the surface for painting of subsequent coats complete all as specified and directed.

Material and Labour for two coats of smooth interior acrylic emulsion with Texture finish white or coloured having VOC less than 50 grams per litre complying LEEDS criteria @1 litres(undiluted) /10 sq metres diluted with water in 2:1 ratio applied over priming coat with fully automatic airless spray machine of paint application with a flow speed of min 1 litre per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface in both the coats of paint as per manufacturer instructions, complete all as specified & directed by Engr-in-Charge.

Preparation of old decorated plastered and unplastered surfaces of walls and cornices, spoiled by smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots by scraping and washing with water and Material and Labour for applying one coat of white wash white or coloured, complete all as specified & directed by Engr-in-Charge.

-Ditto- all as per item No 9.00 here-in-before but on newly plastered surface with two coat of white wash, complete all as specified & directed by Engr-in-Charge.

Preparation of old decorated surfaces of ceiling , spoiled by smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots by scraping and washing with water and Material and Labour for applying one coat of white wash on ceiling, complete all as specified & directed by Engr-in-Charge.

Material and Labour for applying minimum 2mm thick wall care Putty of exterior grade on wall surfaces for filling & making undulation surface even and smooth, complete all as specified & directed by Engr-in-Charge.

Preparation of old painted wooden surfaces of any description not otherwise described, over 10 cm width or girth and Material and Labour for applying two coats of synthetic enamel paint , complete all as specified & directed by Engr-in-Charge.

-Ditto- all as per BOQ Serial item No 13.00 here-in-before but one coat of synthetic enamel paint , complete all as specified & directed by Engr-in-Charge.

Material and Labour for preparation of old painted steel surfaces of any description not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of primer , complete all as specified & directed by Engr-in-Charge.

-Ditto- all as per BOQ Serial item No 15.00 here-in-before but one coat of synthetic enamel paint , complete all as specified & directed by Engr-in-Charge.

-Ditto- all as per BOQ Serial item No 15.00 here-in-before but one coat of aluminium paint on steel surfaces , complete all as specified & directed by Engr-in-Charge. Note:- Item rate shall include any height of shutter for scaffolding as all arrangement.

-Ditto- all as per BOQ Serial item No 15.00 here-in-before but two coats of aluminium paint on steel surfaces , complete all as specified & directed by Engr-in-Charge. Note:- Item rate shall include any height of shutter for scaffolding as all arrangement.

Preparation of old plastered / decorated surfaces of walls & ceiling and Material and Labour for applying one coat of plastic emulsion paint on old plastered surfaces , complete all as specified & directed by Engr-in-Charge.

Material and Labour for cutting and removing with chiesel and taking out the vegetation roots of plants grown on the roof and external surface walls at any height etc by taking all necessary precaution including digging out roots of vegetation and filling holes with PCC (1:2:4) type B1 using (20mm graded stone aggregate) after application of suitable chemical using "break manufactured by M/s Denocil Company to avoid regrowth of the vegetation and removing the debris to a distance not exc 50 metre , complete all as specified & directed by Engr-in-Charge.

Re-writing the existing letters & figures (Block, Roman, Italic or Indian including stops, comma, arrows, brackets, dashes etc on sign board and wall surface in Black or yellow base) not exc 30 cm high & width including Material and Labour for applying two coats of oil paint over a coat white base synthetic enamel paint , complete all as specified & directed by Engr-in-Charge.

Material and Labour for applying one coat of synthetic enamel paint (ordinary tint) on old painted concrete surfaces of any description over 10cm girth or width not otherwise described including necessary preparation of surfaces prior to painting , complete all as specified & directed by Engr-in-Charge.

Taking down cement plaster on brick on stone walls etc including raking out joint, hacking for key, scrubbing down with water etc, complete all as specified & directed by Engr-in-Charge. Note:- Item rate shall include any height of Bldgs for scaffolding as all arrangement.

Material and Labour for rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 finished even and smooth (with out using extra cement) , complete all as specified & directed by Engr-in-Charge. Note :- WPC to be measured and paid separately

Material and Labour for rendering 5 mm thick in CM 1:3 on ceiling surface , complete all as specified & directed by Engr-in-Charge.

Material and Labour for rendering 15 mm thick on fair faces of brick/concrete surfaces in cement mortar 1:4 finished even and smooth without using extra cement , complete all as specified & directed by Engr-in-Charge. Note :- WPC to be measured and paid separately.

Preparing new plastered surfaces of walls and Material and Labour for applying two coats of oil bound distemper over a coat of chalk whitening primer including 2 mm thick wall care putty on plastered surfaces , complete all as specified & directed by Engr-in-Charge.

Preparation of new or previously untreated surfaces of any description and Material and Labour for applying two coats of acrylic (antifungal) exterior grade paint plain or camouflage pattern of over one coat of primer on wall/roof upto 4th storey including necessary scaffolding , complete all as specified & directed by Engr-in-Charge.

Preparation of new plastered surface of ceiling and Material and Labour for applying three coats of white wash on ceiling , complete all as specified & directed by Engr-in-Charge.

Supply only liquid water proofing compound as pedicrete URP mix with cement concrete/ cement plaster as per manufacturer's instruction , complete all as specified & directed by Engr-in-Charge.

Material and Labour for applying two coats of glossy floor guard water based paint, anti-skid, exterior grade (Platinum Series) floor coating to old untreated concrete surface, cement plastered floors/ surface, concrete floors, cement pavers block, chequered tiles, clay tiles etc similar description of work over one coat of approved primer including necessary preparation prior to painting on surface with hose to remove loose dust and scrub with wire brush to remove algae, fungus and moos growth, complete all as specified & directed by Engr-in-Charge. Note:- Allow 7-8 hrs to dry the surface for painting of subsequent coats complete all as specified and directed.

Chipping , removing carefully concrete work by low impact hammer ,breaker without damaging the structure & cleaning and disposal of debris out side the premises etc, complete all as specified & directed by Engr-in-Charge. Hard concrete should not be removed by force.

Material and Labour for Clean existing reinforcement with wire/ rotary wire brush, making the surfaces free from loose material dirt etc. complete and applying two coats of alkaline rust converting primer (FEOVERT of Krishna Conchem or Roff rust cleaner of Pidilite or Dr. Fixit Rust removal or ShaliRust of STP Ltd or equivalent) on the rebars, including cleaning the reinforcement, wire brushing to remove loose rust spalls, wash the rebars with clean water within 3 minutes and wipe it dry, complete all as specified & directed by Engr-in-Charge.

Material and Labour for applying two coats of Epoxy based Zinc primer in a span of four hours over the treated rebars and allow to dry for six hours, complete all as specified & directed by Engr-in-Charge. The application shall be by brush.

Material and Labour for cleaning all loose laitance on the concrete substrate and applying one coat of epoxy bonding agent (MONOBOND SBR of Krishna Conchem or Dr. Fixit epoxy bonding agent or Shalicrete URP of STP Ltd or equivalent) on exposed concrete surface to ensure bond between old concrete & new concrete by brush application, complete all as specified & directed by Engr-in-Charge.

Material and Labour for ready mix polymer cement plaster with high quality polymer additives (Polymer plaster) with 4 MPa compressive strength of required thickness over the entire cleaned surfaces including all tools and tackles, etc. in damaged areas in 40 to 50 mm thickness including levelling profiling etc complete, complete all as specified & directed by Engr-in-Charge. Make:- Krishna Conchem, STP or equivalent as approved by GE.

Material and Labour for Drilling and fixing Rohibb Teflon nozzles in RCC members, including drilling holes of 12mm dia, 50 to 100mm deep holes, complete all as specified & directed by Engr-in-Charge. Works shall be carried out as under :- (i) Cleaning of holes. Clean the holes by air blower prior to fixing nozzles. (ii) Fixing of nozzles. Insert 12mm dia. Rohibb Teflon nozzles in cleaned holes. External end of nozzles to be machine to receive outlet of grouting gun. Fix it inside the holes by applying thixotropic epoxy putty to ensure complete sealing. Cure the system for min.12 hrs. (iii) Cutting of nozzles. Cut the nozzles by chisel after completion of grouting without damaging structural elements. (iv) In case crack upto 2mm wide, fix the injection nozzles directly over the cracks, at intervals of 6 to 9 inches, using a drilling machine. Fix PVC/MS nozzles in these holes with fast-setting epoxy putty & let it dry for 2 to 3 days. Also, seal the crack between the ports with epoxy putty. (v) In case where the crack is wider than 2mm upto 4 to 5mm, drill holes at the sides of the crack in a staggered fashion, at intervals of 6 inches and affix them with epoxy putty as mentioned above. (vi) Also, seal the face of the crack with a liberal application of the epoxy putty.

Material and Labour for Injecting of site mixed cement slurry grout, mixed in specified proportion containing cement, sand water with addition of plasticizers (approved make) & migratory corrosion inhibitors, water cement ratio shall be varied between 0.5 to 1.0 for each hole, shrinkage compensating cement slurry mixed to a lump free fresh creamy consistency , Mixing shall be done by mechanical mixer continuously stirring mechanically to keep cement particles in suspension. Injection of approved/specified grout by means of pump at a pressure of 3-5 Kg/cm2 etc complete till the grout mix flows out from the nozzle indicating complete filling of grout in the holes drilled, complete all as specified & directed by Engr-in-Charge. Make / brand of Epoxy grout - Dr. Fixit Epoxy injection or EPCO KP-HP-250 of M/s Krishna Conchem or Shaligrout EI of STP Ltd or equivalent as approved by GE)

Material and Labour for Injecting low viscosity (3-5cps) high molecular weight monomer by pressure and using mechanized injector gun with accessories till nozzles refuses to accept the grout, Including, Mixing of materials : Mixing of material components(part a&b) in the required quantities as per manufacturer's instruction by weigh batching. Grouting : Fill the grouting gun with concrete penetrating corrosion inhibitor (EPCO-KP-100 / Protectsil CIT / Ferogard 903 or equivalent). Maintain desired pressure in the gun by air compressor; maintain the pressure at exit(2 to 3kg/sqcm) by monitoring pressure gauge at exit. Grout the material through prefixed nozzles in the structural elements@ 100ml per nozzle. Repeat the process for all the nozzles, complete all as specified & directed by Engr-in-Charge.

Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed by Engr-in-Charge. Note:-Replacement of steel reinforcement with TMT bars of appropriate size where 30% of cross section is reduced including dismantling of rusted steel complete all as specified and directed.

Providing and fixing Mild steel bars 5mm dia and over upto and including 10mm dia additional main steel bar or stirrups of designed diameter in various structural elements like column, beams and foundations including drilling ,bending, welding and fixing the bars with epoxy putty etc , complete all as specified & directed by Engr-in-Charge. (Steel provided on the basis of 1% of volume of concrete). Note:- Replacement of steel reinforcement with TMT bars of appropriate size where 30% of cross section is reduced including dismantling of rusted steel complete all as specified and directed.

Material and Labour for Providing and applying jacketing around columns with Micro concrete (Molith-MC) M40 including all lifts, shuttering, drilling holes and fixing shear anchor as per specification , complete all as specified & directed by Engr-in-Charge. Note: Reinforcement shall be measured and paid separately. (Rates including jacketing, formwork and micro concrete)

Material and Labour for old external wall surface by wire brushing/grinding in order to remove dust, dirt, loose particles, laitance. Thereafter wash the surface with mechanical water nozzle with clean water & allow to dry. Fill visible cracks/ joints by crack seal compound and epoxy base joint filler including resin and hardener in proportion as per manufacturer's instruction & allow to dry for 24 hours. Apply one coat of water based primer (with mechanically airless paint sprayer machine) and allow to dry for 6 hours appx. Thereafter apply 02 coats of WB high build anti carbonating coating cum waterproofing (with mechanically airless paint sprayer machine) & match with brush at the interval of 08 hours between the coat and allow to dry to match the existing shade in camouflage pattern including or plain paint necessary scaffolding necessary security for the workers for any height, covering etc , complete all as specified & directed by Engr-in-Charge. Note:- External water proofing treatment on wall at any height of the building including acrylic paint shall be applied by mechanically Airless paint sprayer machine only.

Material and Labour for Silicon gun paste around windows of any type and size including any height of the building by using scaffolding , complete all as specified & directed by Engr-in-Charge.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) , complete all as specified & directed by Engr-in-Charge.

Supply and Fix PVC pipes single socketed in any length with rubber ring joints fixed to wall (160mm bore) including flat iron clamp for proper fixing , complete all as specified & directed by Engr-in-Charge.

Supply and Fix PVC pipes single socketed in any length with rubber ring joints fixed to wall (110mm bore) including flat iron clamp for proper fixing , complete all as specified & directed by Engr-in-Charge.

Supply and Fix PVC pipes single socketed in any length with rubber ring joints fixed to wall (75mm bore) including flat iron clamp for proper fixing , complete all as specified & directed by Engr-in-Charge.

Supply and Fix in repairs PVC bends 160mm dia , complete all as specified & directed by Engr-in-Charge.

Supply and Fix in repairs PVC bends 110mm dia, complete all as specified & directed by Engr-in-Charge.

Supply and Fix in repairs PVC bends 75mm dia , complete all as specified & directed by Engr-in-Charge.

Supply and Fix PVC (SWR) branch piece single (single 'Y') equal or unequal 110mm bore, complete all as specified & directed by Engr-in-Charge.

Supply and Fix PVC (SWR) branch piece double (double 'Y') equal or unequal 110mm bore, complete all as specified & directed by Engr-in-Charge.

Supply and Fix Cast iron 150mm dia rainwater soketed pipes with cement joints, without ears all as specified and directed by Engr-in-Charge.

-Ditto- all as per BOQ Serial item No 54.00 here-in-before but 100 mm dia

Supply and Fix for 150 mm bore Bends or elbows, square, or obtuse, complete all as specified & directed by Engr-in-Charge.

Supply and Fix for 100 mm bore Bends or elbows, square, or obtuse, complete all as specified & directed by Engr-in-Charge.

Supply and Fix 100 mm dia Branch, double fixed all as specified and directed by Engr-in-Charge

Special Condition:- The work pertaining to periodical services & Water Proofing shall be executed from authorized applicator through manufacturer of which the materials .i.e. Paint, Distemper, Cement base paint, Putty etc. is proposed to be used by the contractor and approved by Garrison Engineer.

Notes:- The Rate quoted Ser item No 1 to 58 here-in-before are deemed to include for the following and nothing extra will be paid for these works:- 1. Cleaning the floor surface area after painting work if contractor fail to cleaning the floor surface a recovery of Rs. 75/- per Sqm of floor area shall be made from his dues. 2. Supplying, erecting and use of scaffolding upto required height around the building (max 20 to 25m) or upto 6th floor height with necessary H-frames, pipes, couplers, buckles, bracing, top platform with support railing at top etc. at all levels of building including carriage of the materials to the location, erecting, fixing the scaffolding and dismembering the same after working and taking away the scaffolding materials etc. complete as per direction of Engineer-in-charge.

Dismantling wall and ceiling boards or insulation boards, any thickness, any description, including cover fillets complete all as specified and directed by Engr-in-Charge.

Supply and Fix for PVC False ceiling consisting of 600 mm x 600 mm, 8-10mm thick prelaminated self design including frame work made using aluminium T section of size (25mm x 25 mm, 19 gauge or 1mm thick) in square pattern of grid size of 600 x 600 mm. The aluminium frame work is supported from the ceiling with the help of GI wire/6 mm dia GI (upto 1200 mm length) adjusting and maintain for proper level to roof slabs by means of ceiling cleats made out of GI flat 40x3 mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long complete etc. The aluminium frame work is supported on side wall with the use of aluminium 25 mm X 25 mm angles complete as per direction of Engr-in-charge, Manufacturer's specification & drawing. (Note:- Items rate shall be include upto 20.00 meter height of bldgs for scaffolding as all arrangement all as specified and directed by Engr-in-Charge.)

Supply and Fix false ceiling with Armstrong XL 24mm grid system of grid size 600x600mm with 12 mm thick ceiling board of RH-90. including frame work made using aluminium T section of size (25mm x 25 mm, 19 gauge or 1mm thick) in square pattern of grid size of 600 x 600 mm. The aluminium frame work is supported from the ceiling with the help of GI wire/6 mm dia GI (upto 1200 mm length) adjusting and maintain for proper level to roof slabs by means of ceiling cleats made out of GE flat 40x3 mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long complete etc. The aluminium frame work is supported on side wall with the use of aluminium 25 mm x 25 mm angles complete as per direction of Engr-in-charge, Manufacturer's specification & drawing.

Supply and Fix 8 to 10mm thick regular edged eco friendly light weight calcium silicate smooth texture false ceiling tiles size 600x600mm even back surface aluminium foil, truly moisture resistance 90% including main T section of size (25mm x 25 mm, 19 gauge or 1mm thick) in square pattern of grid size of 600 x 600 mm. The aluminium frame work is supported from the ceiling with the help of GI wire/6 mm dia GI (upto 1200 mm length) adjusting and maintain for proper level to roof slabs by means of ceiling cleats made out of GE flat 40x3 mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long complete etc. The aluminium frame work is supported on side wall with the use of aluminium 25 mm X 25 mm angles complete as per direction of Engr-in-charge, Manufacturer's specification & drawing.

Material and Labour for providing and fixing in repair, Decorative Hollow PVC sheet 10 mm thick fixed to wall and ceiling with self drilling screws including necessary frame of aluminium section 75x25x.55mm and 600 mm c/c 51x32x.55mm grid work and corner mouldings as required as per manufacturing instruction and colour and pattern as per directed by Engr-in-Charge. Note: All items rate shall be include in any height of bldg for scaffolding as all arrangement.)

Supply and Fix in repair 8 to 10mm thick PVC false ceiling consisting of 600mm x 600mm prelaminated self design insert existing frame work without disturbing the other false ceiling and making good existing frame with all as specified and directed by Engr-in-Charge. (Note:- Items rate shall be include upto 20.00 meter height of bldgs for scaffolding as all arrangement all as specified and directed by Engr-in-Charge.)

Supply and Fix in repair 8 to 10mm thick armstorng ceiling board of RH -90 false ceiling consisting of 600mm x 600mm insert existing frame work without disturbing the other false ceiling and making good existing frame with all as specified and directed by Engr-in-Charge.

Supply and Fix in repair 8 to 10mm thick regular edged eco friendly light weight calcium silicate smooth texture false ceiling tiles size 600x600mm even back surface aluminium foil, truly moisture resistance 90% insert existing frame work without disturbing the other false ceiling and making good existing frame with all as specified and directed by Engr-in-Charge. (Note:- Items rate shall be include upto 20.00 meter height of bldgs for scaffolding as all arrangement all as specified and directed by Engr-in-Charge.)

Supply and Fix 4 mm thick plain asbestos cement board as in false ceiling with and applying two coats of oil bound distemper over a coat of chalk whitening and making to good existing frame without disturbing the other false ceiling complete all as directed by Engr-in-Charge. (Note:- Item rate shall be include any height of Bldgs for scaffolding as all arrangement.)

Supply and Fix PVC sheets, of 2mm thick laminated plain coloured, laid with approved rubber based adhesive in floors all as specified and directed.

Material and Labour for 2 mm thick polymer natural/ synthetic anti static flooring fire retardant compression moulding conductive flooring having electrical residence floor surface to earth between 50 kilo Ohms to 2.5 mega Ohms measured with wet electrode between 50 kilo Ohms to 2.5 mega Ohms measured with wet electrode in accordance with details contained in STEC pamphlet No 7 all as specified and fixed over and including copper strips grid work using 50mm x 0.5mm thick forming 0.9 Sqm grid, joints of copper strips, brazed on the existing surface including cleaning preparation of surface by passing with the suitable adhesive. The copper gird provided with diagonal earthing. The earthing resistance shall not exceed one ohm. The copper strips work shall be fixed to the existing floor at the 0.6m to 0.9 mm all as specified and as per manufacture instruction all as specified and directed including removing existing PVC flooring complete all as specified and as directed. Make:- Natroyal Vinyl Industries Pvt. Ltd, Premier Polyfilm Ltd, Tankaria Industries Pvt Ltd, MS Curative Pvt Ltd, Brighton Enterprises or equivalent as approved by GE.

Note:- The Rate quoted Ser item No 61 to 71 here-in-before are deemed to include for the following and nothing extra will be paid for these works:- 1. Supplying, erecting and use of scaffolding upto required height around the building (max 20 to 25m) or upto 6th floor height with necessary H-frames, pipes, couplers, buckles, bracing, top platform with support railing at top etc. at all levels of building including carriage of the materials to the location, erecting, fixing the scaffolding and dismembering the same after working and taking away the scaffolding materials etc. complete as per direction of Engineer-in-charge.

Mahadev Enterprises (BID ID -3358182)

Shri Krishna Trading Corporation (BID ID -3363382)

OM ENTERPRISES (BID ID -3358130)

M.K Enterprises (BID ID -3362094)

BALAJI TRADERS (BID ID -3364350)

EVEREST CONSTRUCTION (BID ID -3364098)

Nexus Infratech (BID ID -3363128)