S/E for Wearing coat at Spillway, Painting Spillway railing and Control room and fixing MS Girder at Dongri Dam

Dismantling old Damaged plain cement concrete including disposal lead up to 2km all cost of labour T&P etc required for completion of work

Providing centering and shuttering for plain cement concrete in wearing coat including all cost of labour material, T&P etc. required for completion of work

Providing and laying plain cement concrete 1:2:4 Cement, coarse sand, well graded stone grit of (10-20mm) size lead in wearing coat including all cost of labour material, T&P, mechanical mixing and vivration etc. required for completion of work

Providing and fixing 25mm thick thermacol for Making partition of plain cement concrete panel in wearing coat including all cost of labour material, T&P etc. required for completion of work

Providing and laying filler compound (bitumen) in joint of plain cement concrete panel including all cost of labour material, T&P etc. required for completion of work

Removing white or colour wash by Scraping and sand papering and preparing the surface smooth including necessary repair to scratches labour T&P etc. complete.As per directeion of Engineer- in - Charge.

Finishing walls with premium Acrylic smooth exterior paint with silicone additives of required shade.

Painting steel work with Delux Multi Surface paint to give an even shade. Two or more coat applied @0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr 10 sqm of approved brand and manufacture.

Earth work in Mar, Rankar and kankar mixed soils in digging or in embankment including lead up to 30 m. and lift up to 1.5 m. including dressing making profile and manual compaction but excluding mechanical compaction

Reinforcement for RCC and RB work including cutting, placing & binding with MS Girder including its cost.

Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC 67-2012 made of high intensity grade sheeting type-IV vide clause 801 ,3. fixed over aluminium sheeting 1.5mm thick supported on a mild steel angle iron post 75mm x 75mm x 6mm firmly fixed to ground by means of properly designed foundation with M 15 grade cement concrete 45cm x 45cm x 60cm blow ground level as per approved drawing. the Retro reflective sheeting shall be tested for the certificate of having the sheeting tested for coefficient of retro reflection. daytime colour and luminance, shrinkage, flexibility, liner removal, adhesion, impact resistance specular gloss and fungus resistance, 3 year outdoor weathring and its having passed these tests shall be obtained from international/ Government laboratory/ Institute by the manufacture of the sheeting and in case the certificate is obtained from international condition, it should also be obtained from indian condition within 3 years of launching of product by the manufacture in abroad Alternatively, a certificate conforming to ASTM Specification (D 4956-09) on artificial accelerated weathring requirements from a reputed laboratory in india can be accepted provisionally in such a situation the employer/ Client if so desires, could seek for a performance guarantee which would be released after receipt of certificate meeting the requirement of three year outdoor weathring of the sheeting as per IRC 67:2012 Legends Letters numbrals and borders etc should be as per MoRTH specificaation No- 801 3.3 Proof of the same in from of government report shall be uploaded while quoting tende