SPECIAL REPAIR TO BLDG NO. P-04 (OTM ACCN) AND PROVN OF DEFICIENT 14 X GEYSERS FOR OFFRs, JCOS AND OR ACCN IN NEW KLP AT PATIALA UNDER GE (SOUTH) PATIALA

Amount

'Notes: (i) Please refer Schedule 'A' Notes of tender documents.

Taking down cement plaster of any description, any thickness from external/internal surfaces of walls/soffits/ceilings etc. incl raking out joints, hacking for keys, scrubbibg down with water etc complete all as specified and directed.

Demolition of brick work or stone/boulder masonary built in cement mortor including all quoins,arches,pillars etc complete all as specified and directed.

M&L Brick work with sub class 'B' bricks straight or curved on plan exceeding 6m mean raidus bulit in C:M 1:6 complete all as specified and directed.

M&L for dubbing out average 10mm thick in CM 1:4 on irregular surface of soffits of slabs/Chajja/ Sunshades etc incl temorary provision of scaffolding etc complete all as specified and directed.

M&L for cement plastering 15mm thick in cemet mortar 1:4 including mixing of liquid water proofing compound as per manufacturer's instructions on brick work or concrete surfaces or in chajjas/parapet walls etc finished even and fair without using extra cement complete all as specified and directed. Note : WPC will be measured and paid separately.

Supply only integral liquid water proofing compound complete all as specified and directed.

M&L for 10mm thick cement plastering in cement mortar 1:6 on fair faces of brick work or concrete surfaces finished even & smooth without using extra cement complete all as specified and directed.

M&L for 5 mm thick cement plastering in cement mortar 1:3 on fair faces of concrete ceiling surfaces finished fair & even without using extra cement complete all as specified and directed.

M&L for complete removal of existing treatment of any type/description from walls/RCC surfaces/ceiling/chajjas/roof projections etc with mechanical means/grinder or manually (if directed) complete all as specified.

M&L for applying acrylic thick wall care putty on external/internal surfaces of walls/ceilings/soffits etc (thickness vary from 1.5 to 2.5 mm as required for desired smoothness and levelling of surfaces in two or more layers) by using ready made wall care putty including sand papering after filling the putty to make surface smooth and ready for receiving painting etc complete all as specified and directed. Notes : (i) The prepared surface after wall putty, the contractor will infoRunning Metre to the GE as well as to the Engineer-in-Charge for site inspection before applying further finishes. Please note that the further finishes work will start only after approval of the prepared surface from the GE as well as to the Engineer-in-Charge through site order.

M&L for preparation of surfaces and applying 02 coats of interior emulsion paint (light shade) @ 10 sq.m/litre/2 coats by using roller/brush to wall surfaces over & including a coat of interior wall primer @ 10 sq.m/litre/1 coat as recommended for under coat by manufacturer of interior emulsion by using following brands of emulsion and primer complete all as specified and directed.

M&L for preparation of surfaces and applying 02 coats of interior emulsion paint (white shade) @ 10 sq.m/litre/2 coats to ceilings surfaces over & including a coat of interior primer @ 10 sq.m/litre/1 coat as recommended for under coat by manufacturer of interior emulsion by using following brands of emulsion and primer complete all as specified and directed.

M&L for preparation of surfaces and applying 02 coats of exterior emulsion paint (light shade) with highlighter of any approved shade, @ 5 sq.m/litre/2 coats by using roller to external walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc surfaces over & including a coat of exterior wall primer @ 11 sq.m/litre/1 coat as recommended for under coat by manufacturer of exterior emulsion by using following brands of emulsion and primer complete all as specified and directed.

Dismantling, floor, hearth or wall tiling including CM bedding (but not backing), removing serviceable tiles to store & rubbish off the premises complete all as specified and directed

Demolition of cement concrete un -reinforced in ground floors and pavings n.exc 15cm thickness complete all as specified and directed.

M&L cement concrete work 1:4:8 type D-2 in sub-case to flooring etc complete all as specified and directed.

M&L for 25mm thick cement concrete work 1:2:4 using 12.5mm graded stone aggregates in sub-case to flooring etc complete all as specified and directed.

M&L for ceramic glossy finish, joint free premium quality coloured tiles 600 X 300 mm and 8-9 mm thick, in any pattern of light & dark/highlighters tiles etc as approved, on vertical surfaces such as in skirting/dado etc, set and jointed in cement slurry over & including 10 mm thick rendering in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles complete all as specified and directed.

M&L for mat finish anti skid vitrified tile joint free premium quality coloured tiles 600 X 600 mm and 9-10 mm thick, as in floors etc. in any pattern of light & dark tiles as approved, set and jointed in neat cement slurry and pointed in white or coloured cement to match, in floors etc. over & including 20 mm thick screed in cement mortar (1:4) over and pointed in white cement with pigment to match the colour of tiles complete all as specified and directed.

M&L for mat finish anti skid ceramic tile joint free premium quality coloured tiles 300 X 300 mm and 7-8 mm thick, as in floors etc. in any pattern of light & dark tiles as approved, set and jointed in neat cement slurry and pointed in white or coloured cement to match, in floors etc. over & including 20 mm thick screed in cement mortar (1:4) over and pointed in white cement with pigment to match the colour of tiles complete all as specified and directed.

M&L for machine cut kota stone slab (nearest to 58cmx58cm in size) flooring 20-25mm thick laid over and including 20-22 mm thick screed bed or bedding layer in cement mortar 1:4 as base laid and jointed with gray cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing incl 100mm wide border of Baroda Green Marble complete all as specified and directed.

M&L for pre-polished Baroda Green marble, machine cut as in floorings/ shelves/ steps/ cills/ jambs/ skirting/ border only in tile flooring and the like works and flooring etc, 20 mm thick including bull-nose the exposed sides/lengths, set and jointed in cement slurry over & including screed of 15 mm thick rendering in cement mortar (1:4) and pointed in cement mixed with pigment to match the shade of slab for fixing on concrete surfaces or with suitable adhesive for fixing on un-polished kota stone slabs including rubbing, cutting and mirror type granite polishing complete all as specified and directed. Note : Single piece should be used in steps/cills/jambs/shelves.

M&L for rounding to edges (both side edges) )of stone slabs (of fany description), such as in steps, cooking platfoRunning Metre, and other similar situations including rubbing and polishing (mirror finish), complete all as specified and directed.

M&L for cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate as in plinth protection, 50 mm thick, surfaces finished even and fair without using extra cement as in plinth protection including provision of construction joints and filling the same with polyureathene complete all as specified and directed.

Taking down chowkhats or frames (without taking off shutters from the frame) n. exc 1.5 Sqm incl cutting holes and making good to disturbed surfaces complete incl ventilators including reqd shape for hold fast block for new frame complete all as specified and directed.

Taking down chowkhats or frames (without taking off shutters from the frame) exc 1.5 Sqm and n. exc 4.00 Sqm incl cutting holes and making good reqd shape for hold fast block for new frame complete all as specified and directed.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 x 75 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp?ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being teRunning Metreite/borer proof, water/ moisture proof and fire retardan and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed. Note: (i) For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. (ii) M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately.

M&L for providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being teRunning Metreite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed.

S&F door frames made of PPGI sheet of 1.20 mm thickness for doors with one or more rebates including necessary fixing lugs, stainless steel 150mm hinges 3 nos per frame, lock strike plate, hold fast etc., complete all as specified, size 105 x 60mm and incl cutting holes and making good reqd shape for hold fast block for new frame complete all as specified and directed.

S&F door frames made of PPGI sheet of 1.20 mm thickness for doors with one or more rebates including necessary fixing lugs, stainless steel 150mm hinges 3 nos per frame, lock strike plate, hold fast etc., complete all as specified, size 125 x 60mm and incl cutting holes and making good reqd shape for hold fast block for new frame incl complete all as specified and directed.

M&L for cement concrete (1:2:4) using 12.50 mm graded stone aggregate as in fillings and mass concrete, filling backs of chowkats, hold fasts etc., complete all as specified and directed.

S&F 2nd class hard wood 35mm thick factory made Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F 35mm thick glazed and skelton shutters of 2nd class hard wood (factory made) open rebated and divided to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutter as specified in SSR-91 Pt-1 section 8 clause 8.20(a), kiln seasoned and chemically pressure treated complete all as specified and directed. Note : Glass or wire cloth, etc. in panels or sash squares shall be measured separately.

S&F 50 micron powder coated Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make confoRunning Metreing to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, complete all as specified and directed.

S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make confoRunning Metreing to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws complete all as specified and directed.

S&F aluminium alloy anodised extruded fabricated type handle 150mm long complete all as specified and directed.

S&F aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) 300 mm long fixing clips of sheet cast or and fixing with bolts extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed complete all as specified and directed.

S&F aluminium alloy, anodised, barrel tower bolt (bolt type) 200 mm long of extruded section or cast aluminium alloy and fixed complete all as specified and directed.

S&F stainless steel finished 202 Grade butt hinges 150mm long complete all as specified and directed.

S&F stainless steel 202 Grade finished 200mm long tower bolts in square shaped with minimum 10mm dia rod complete all as specified and directed.

S&F Stainless Steel 202 Grade Finished curved Handles 200 mm long complete all as specified and directed.

S&F Stainless Steel 202 Grade Finished Sliding Door Bolt/Aldrop 16 x 300mm with square nuckle complete all as specified and directed.

S&F 300mm, mild steel ordinary rat tail rod (helical type) pattern springs including roller and roller plate complete all as specified and directed.

M&L 4mm thick sheet glass ordinary quality and glazing with oil putty in spare not exceeding 0.5 sqm in each pane complete all as specified and directed.

M&L 5mm thick frosted glass in ventilators/ windows/ doors fixed in any metal frame work all as specified and directed.

S&F Stainless steel wire cloth, Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified.

Preparing new wooden surfaces and applying two coats of synthetic enamal paint over one coat of pink wood primer complete all as specified.

M&L for preparing old painted steel and iron surfaces of any description and applying two coats of synthetic enamel paint complete all as specified.

M&L for preparing steel and iron surfaces of any description and applying two coats of synthetic enamel paint complete all as specified.

S&F 25mm bore minimum 1mm thick stainless steel finished curtain rods inlcuding stainless steel finished brackets and stainless steel finished finials and end plugs etc of same manufacturer including screws/rawl plugs as specified by manufacturer for fixing complete fixed in position all as specified.

Dismantling wooden boarding of any description,fixed in any position with nails as in shelves of cup board and pelmets of any description complete all as specified and directed.

S&F 18mm thick high Density High Moisture Resistant (HDHMR) exterior Grade Board with both side white balancing (BSB) with density of 850 Kg/cu.m complete all as specified and directed. Note : Board on back side wall will be fixed with minimum 5mm PVC spacers/buffers. The payment for the same deemed to be included in the quoted unit rates.

S&F 18mm thick high Density High Moisture Resistant (HDHMR) exterior Grade Board with one side designer laminate (OSL) of approved colour and finishing and other side white balancing with density of 850 Kg/cu.m complete all as specified and directed.

S&F D-type cabinet handles premium quality, stainless steel 304/gloss chrome/SN finished 200mm long matt finished complete fixed in position all as specified.

S&F Piano/continuous hinge of size 19 mm stainless steel complete all as specified.

S&F ball catchers 304 grade stainless steel finished suitable for cabinets premium quality complete fixed in position as per manufacturer's instructions all as specified.

Dismantling of brick tiles or terracing tiles single layers on roofs complete all as specified.

Demolition of mud phuska on roof any thickness including removal to the low lying area or outside the defence land all as directed.

Roughening surfaces of old concrete floor/roof by picking, sweeping clean and washing down with water to remove dust, etc. complete all as specified.

M&L for PCC 1:3:6, type B-0 using 12.5mm graded stone aggregates as in padding over roof, minimum thickness at khurra as 25mm to maintain a slope of 1:100 ,complete all as specified and directed.

M&L for cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and directed.

M&L for surface preparation by comprising of : (i) Concrete substrates must be prepared mechanically using abrasive blast cleaning equipment to remove cement laitance and achieve an open textured surface. Required minimum pull off strength is 1.5N/mm². (ii) Repairing surface irregularities, damaged concrete in base slab, if any, with an latex polymer, SBR Latex or equivalent modified repair mortar including a coat of bonding agent of the same with cement slurry including all material, labour, tools and tackles complete as specified and directed.

Providing and laying 3mm thick APP (Atactic Polyproplene Polymer) modified prefabricated five layer, weight not less than 4.0 Kg/Sqm water proofing membrane black finished, reinforced with non-woven polyster matt make as approved including of a coat of bitumen primer @ 0.40 ltr/sq.m by the same membrane manufacturer of density 0.87 to 0.89 Kg/Ltr at 25 degree C temperature and viscosity 70 - 160 cps Over the coat, 3mm th 5 layered APP membrane shall be laid using butane torch and sealling all joints etc after the surface complete as per standard practice as per manufacturers instructions. The vital physical and chemical parameters of the membrane shall be as under - (i) Joint strength inlongitueinal and transverse direction at 23 degree C as 650/450N/5cms (ii) Tear strength in longitudinal and transverse direction as 300 / 250 N/. Softening point of membrane not less than 150 degree C Cold flexibility upto 20 degree C when tested in accordance with ASTM (D05147) (iii) The laying of membrane shall be got done through the authorised applicator of manufacturer of membrane only all as specified and directed.

M&L for Plain Cement Concrete tiles 25cm x 25cm x 22-25mm thick, machine pressed; set jointed and pointed in neat cement slurry in floors, and cut and polished laid over 15mm thick screed bed in CM 1:4 complete all as specified.

M&L for Flush pointing in CM 1:3 to bricks/ brick tiles laid flat in pavings/ roof terrace etc incl raking out joints/ pointing built in cement mortar to existing brick work/ tile terracing laid flat in floors, roof terrace, roofs, etc complete all as specified and as directed by Engineer-in-Charge.

S&F PVC(HDPE) SWR , 110 mm bore, single socketed in any length with rubber ring joints using solvent as per maunfacture instruction, fixed to walls complete all as specified including fixing of pipe to wall with flat iron clamps of size 25 x 3mm, bolts washing, nuts etc as in repairs after taking down existing damaged CI rain water pipe complete all as specified. Note : Clamps will be measured and paid separately.

S&F PVC (SWR) bends of any radius for 110mm bore complete all as specified.

S&F for MS Clamps, Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay) and similar small articles confoRunning Metreing to Fe-290 Gde-E-165 all as specified

M&L for Plain cement concrete 1:2:4 type B-0 using 12.5mm graded mechanically crushed stone aggregate as in roof kerbs or mud stops and benching, rounded or chamfered on edges, coving shall be 150 mm in radius mixed with acrylic based polymer water proofing compound complete all as specified and directed. Note:WPC shall be paid separately

Demolition of reinforced cement concrete in cutting of reinforcement of any description in any position such as roof projections/ chajjas/ water retaining structures etc (reinforcement cut to a required facilitate) upto 10m height including temporary arrangement of necessary scaffolding, ladders etc all as specified and directed.

M&L for Reinforced Cement Concrete (RCC) 1:2:4 using 20mm graded stone aggregates as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified.

M&L for form work rough finished to soffits of suspended slabs such as roof slabs not exc 200mm thick (Horizontal or sloping) complete all as specified.

M&L for form work rough finished to edges of concrete slabs exc 5 cm but not exc 10 cm thick

M&L for TMT Bars 10mm dia & over cut to length, bent to shape required including cranking, bending spirally hoping for columns, hooking ends and binding with mild steel wire not less than 0.9 mm dia complete all as specified.

Taking up or down existing steel tubing and connections, 20mm bore complete all as directed and specified.

S&F 20mm bore steel water tubing medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floor etc complete all as directed and specified.

Refixing 20mm bore GI steel water tubing medium grade fixed to walls complete all as specified.

Taking up or down existing steel tubing and connections, 25mm bore complete all as directed and specified.

S&F 25mm bore steel water tubing medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floor etc complete all as directed and specified.

Refixing 25mm bore GI steel water tubing medium grade fixed to walls complete all as specified.

Taking up or down existing steel tubing and connections, 15 mm bore complete all as directed and specified.

S&F 20mm (OD 22.20mm) CPVC pipes SDR 11, class-1 for potable hot and cold water distribution supplies lead free confiRunning Metreing to IS-15778 laid on walls/ceiling or laying in floors jointed with suitable CPVC solvent cement of same manufacturer and incl all CPVC SDR 11 fittings as required and suitable for fixing 15mm CP faucets/ fixtures complete all as specified and directed.

S&F 25mm (OD 27.20mm) CPVC pipes SDR 11, class-1 for potable hot and cold water distribution supplies lead free confiRunning Metreing to IS-15778 laid on walls/ceiling or laying in floors jointed with suitable CPVC solvent cement of same manufacturer and incl all CPVC SDR 11 fittings as required complete all as specified and directed.

S&F Brass Elbow (3/4 X ½) fittings suitable for 20mm CPVC pipes SDR-11 class-1 complete all as specified.

S&F Male/Female Brass Threaded Adaptor (MTA/ MBTA) ) fittings suitable for 20mm CPVC pipes SDR-11 class-1 complete all as specified.

S&F Vitreous China squatting pan of "Orissa Pattem of size 580x440mm snow white colour ISI marked, fixed in repairs with integral footrest including taking down old unserviceable existing one complete all as specified and directed. Note: The quoted rate shall include provision of "P" Cast Iron trap complete all as specified and directed. Make : Cera (CALINA S3010102) or equivalent make mentioned in hereinafter.

S&F vitreous china premium/1st quality wash down water closet pan floor mounting (pedestal pattern/EWC) with S/P trap snow white colour of size 520X360X390mm including connection to drain (or out going pipe) and to flushing pipe, antisyphonagee pipe,etc.,with flush pipe and incl. S&F plastic seat cover as recommended by manufacturer closed pattern with flat bottom etc; and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, packing and including and taking down existing of any description/size complete in all respect all as specified. Note : EWC with S trap will be provided only on G.F. and other remaining floors will be provided with P trap EWCs.

S&F CP jet for EWC with chrome finished connction pipe including all accessories for fixing complete in all respect all as specified.

S&F flushing cistern of Polymer/PVC 10 ltr. cap. with dual flushing system, white colour, valveless syphonic action type, , low level, with inlet, ball valve, float and including brackets and connection to pipe etc. and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, packing and taking down existing of any description/size complete in all respect all as specified.

S&F vitreous china premium/1st quality wash basin (under counter oval shaped), snow white, size 560x470x190 mm including S&F all accessories as recommended by manufacturer complete fixed in position in all respect as per manufacturer's instructions and all as specified. Make : Cera (Cat. No. S2030104) or equivalent make mentioned in hereinafter. Note : The items for counter will be measured and paid separately.

S&F in repair, Vitreous China Urinal 375 x 390 x 590 mm, Half stall type, snow white including fixing plug, Cast Iron Bracket duly painted/Erecting Stand including cutting,CP 32mm flush pipe etc all fittings complete all as specified and directed. Make : Cera (CAPRIANA Cat. No. S4020112) or equivalent make mentioned in hereinafter.

S&F 15mm Wall mounted basin spout and operating lever consisting of exposed part and concealed part quarter turn of Brass Chromium Plated screwed down for 15mm dia pipe incl taking down complete all as specified and directed

S&F 15mm wall mixer valve quarter turn for mixing hot and cold water of Brass Chromium Plated with wall flange/ cups screwed down for 15mm dia pipe incl taking down complete all as specified and directed

S&F 15 mm fancy type chromium plated quarter turn bib tap of long body with CP wall flange cast copper alloy with crutch or butterfly handles screwed down high pressure suitable for 15mm bore pipe or union including taking down old unserviceable existing one complete all as specified and directed.

S&F Angle valve quarter turn 15mm bore cast copper alloy chromium plated fancy type with CP cup/ wall flange high pressure screwed for iron pipe and fixed, including taking down old unservicable existing one complete all as specified and directed.

S&F 2-way Angular Stop Cock, CP, with wall flange, fency type chromium plated cast copper alloy screwed down, high pressure, screwed ends for 15mm bore of iron pipe or for union and fixed in position complete in all respect all as specified.

S&F 450mm long braided hose/PVC connection with 15mm brass nuts complete all as directed and specified.

S&F concealed stop cock quarter turn 15mm bore cast copper alloy chromium plated fancy type with CP cup/ wall flange high pressure screwed for iron pipe and fixed, including taking down old unservicable existing one complete all as specified and directed.

S&F 5mm thick looking mirror fixed to wall with stainless steel plugs/connecter/spacers/screws etc. chrome finish without any beading, including ends/edges of the mirror to be tapered/bevelled edge etched smooth finish etc.complete fixed in position all as specified and directed.

S&F CP/matt finished peg set of size 300mm long and 30mm wide with 6 nos hooks of approved quality fixed with suitable screws complete all as specified.

S&F CP finished towel ring square shaped of size 135 x 195 mm including all accessories like wall flange/ cup fixed with suitable PVC wall plugs & screws as per manufacturer's instructions complete all as specified.

S&F soap dish CP plated of suitable size to accommodate soap complete all as directed and specified.

S&F overhead shower minimum 125mm square shaped with 225-230mm long brass shower aRunning Metre with wall flange and incl all necessary accessories as recommended by manufacturer for fixing complete in all respect all as specified.

S&F stainless steel grating 125 x 125 mm size square shaped with self locking arangement for floor trap fixed in position complete all as specified.

S&F 1st quality waste pipes of 32mm bore & 900mm long suitable for wash hand basins/ urinals incl coupling and all fittings complete fixed in position complete all as specified.

S&F in repair CP waste couplings 32mm size full thread with 80mm height complete fixed in position complete all as specified.

S&F urinal spreader for urinals and incl all necessary accessories as recommended by manufacturer for fixing complete in all respect all as specified.

S&F ISI marked doubled layered rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top / cover) 2000 Ltrs capacity hoisted and fixed in position all as specified including 25 mm dia brass float valves, high pressure, with polythene float and fly nut complete screwed for 25mm bore iron pipe and including GI nipple/union of 25mm bore to connect GI tubing to PVC water tank complete all as specified and directed.

S&F Ball brass valves, high pressure, with polythene float and flynut complete, screwed for 25mm bore iron pipe or brass ferrule complete all as specified and as directed.

Taking down sewage pipe of in any position/size/description complete all as specified.

Taking down bends/floor traps/nahani traps/tee/branch pieces/cowls etc of in any position/size/description complete all as specified.

S&F CI floor traps with grating complete 100mm bore outlet including jointing to waste pipe fixed in cement concrete 1:2:4 type B-1 complete all as specified and directed. Note:The quoted rate shall include embedding the floor trap in PCC block of size 300x300x250 mm block of PCC 1:2:4 type B-2, complete all as specified and directed by Engr-in-charge

S&F CI floor traps with grating complete 75mm bore outlet including jointing to waste pipe fixed in cement concrete 1:2:4 type B-1 complete all as specified and directed. Note:The quoted rate shall include embedding the floor trap in PCC block of size 300x300x250 mm block of PCC 1:2:4 type B-2, complete all as specified and directed by Engr-in-charge

S&F CI nahni traps with grating complete 100mm bore outlet including jointing to waste pipe fixed in cement concrete 1:2:4 type B-1 complete all as specified and directed. Note:The quoted rate shall include embedding the floor trap in PCC block of size 300x300x250 mm block of PCC 1:2:4 type B-2, complete all as specified and directed by Engr-in-charge

S&F Cast iron sand cast soil waste & vent pipe in any length with or without ears with cement joints fixed to walls 100mm running bore in and including stack clamps, nuts bolts etc and making necessary connections, complete all as specified and directed.

S&F Cast iron sand cast soil waste & vent pipe in any length with or without ears with cement joints fixed to walls 75mm running bore in and including stack clamps, nuts bolts etc and making necessary connections, complete all as specified and directed.

S&F Cast iron sand cast soil waste & vent pipe 100mm bore in any length with or without ears with cement joints laid in trenches or in floor complete all as specified and directed by Engr-in-charge

S&F Cast iron sand cast soil waste & vent pipe 75mm bore in any length with or without ears with cement joints laid in trenches or in floor complete all as specified and directed by Engr-in-charge

S&F CI bends 100mm bore pipes (any radius) diminishing pieces or tapers (larger bore measured) without oval access door complete all as speciied and directed.

S&F CI bends 75mm bore pipes (any radius) diminishing pieces or tapers (larger bore measured) without oval access door complete all as speciied and directed.

S&F Cl bend 100mm bore pipes (any radius) with oval access door of 100 mm bore fixed complete all as specified and directed by Engineer-in-Charge.

S&F Cl bend 75mm bore pipes (any radius) with oval access door of 75 mm bore fixed complete all as specified and directed by Engineer-in-Charge.

S&F Cast iron cowls for 100mm bore pipes complete all as specified.

S&F CI double branch door Tee suitable for 100mm bore pipes ISI marked complete all as speciied and directed.

S&F CI plain Tee suitable for 100mm bore pipes ISI marked complete all as speciied and directed.

S&F CI door Y-Tee suitable for 100mm bore pipes ISI marked complete all as speciied and directed.

S&F CI 'P' or 'S' trap 100mm bore with long aRunning Metre ISI marked complete all as speciied and directed.

S&F Cast iron work grade FG 150, unmachined, in brackets, gully traps, gratings, railing, frames, manhole covers, fire and soot doors, dampers, stop valve boxes, gate stops, parts of ranges, balusters and similar articles complete all as specified.

Taking down of existing CI pipe 75mm or 100 mm bore from any position and refixing the same after cleaning & painting with 2 coats in any position including jointing in cement mortar complete all as specified and directed.

Taking down of existing CI fitting like bends/ Tee/ Double Tee/ Y-Tee etc of 100 mm bore from any position and refixing the same after cleaning & painting with 2 coats in any position including jointing in cement mortar complete all as specified and directed.

S&F Stack clamps for 100mm bore CI pipes made out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified.

M & for water proofing treatment to sunken floor with depth not exceeding 450mm with the following course of treatment/ specification: (i) Cleaning top surface of floors /slabs and laying 100 mm thick (avg) PCC of grade M10 (Nominal mix) , mixed with WPC as per manufactrrer's instruction laid in slope 1:20 towards spouts including coveting corners (ii) 15 mm thick plastering in CM (1:4) on sides mixed with WPC as pe Running Metreanufacturer's instruction. (iii) Applying 1st layer of slurry @ 0.488 kg / sqm mixed wth acrylic based polymer modified cementious compound @ 0.253 kg /sqm This layer shall be allowed to air cured for 4 hrs. (iv) Applying 2nd layer of slurry @ 0.242 kg/sqm mixed with accrylic based polymer modified cementenous compound @ 0.126 kg/sqm.This layer shall be allowed to air cured for 4hrs followed with water curing for 48 hrs. (v) Applying a coat of industrial bitumen 85/25 penetration @ 1.50 kg/sqm on plastered and concrete surfaces (vi) Providing 150 micron thick polyutethene paint in two coats (each of 75 micron measured dry on dry surface over a coat of PU primer including preparation . (Make of PU primer - Dek guard EP -302 of M/S Fosroc or equivalant make or mentioned in hereinafter.Make of PU paint - Dek guard PU or equivalant make or mentioned in hereinafter. (vii) 2 Nos 40mm bore GI medium grade 450mm long spout ,to be provided through external wall to drainout accumulated water. (viii) Sunken floor shall be tested for water tighness by filling water for 72 hrs before and after treatment work is carried out and ensure that no leakage /seepage exists (ix) Sunken portion shall be filled with lean concrete of grade M7.5 stone agreegate Note : Only top/finished horizontal surface will be measured for the payment purpose.

S&F Plain, Aluminium sheeting of 0.71mm thick , Alloy 31000 H4 in crumble joint all as specified and directed by Engr-in-charge

Taking down carefully copper/aluminum point wiring (light, fan, socket or power) complete with fittings and fixtures such as switches, ceiling roses, pendants, regulators, socket, lamp holders brackets, bulk head fittings etc removing material for taking credit ( credit shall be recovered as per credit Sch attached) and also making good disturbed surfaces of wall, floors etc all as specified and as directed by the Engineer-in-Charge.

M&L for point wiring with 1.50 sqmm in copper conductor cable ( multistrand) FRLS single core PVC insulated cable in and including PVC concealed conduit ( ISI Marked) of heavy duly with all accessories ie PVC gutties etc teRunning Metreinated in sunken/pressed metal flush box and white modular cover plate with frame for mounting of switches /sockets/ fan regulators etc and continuous earth wire 1.5 Sqmm copper cable PVC insulated FRLS controlled by one switch for one light/fan/sockets point/ all as specified and directed by Engr-in-Charge in ceiling Portion surface conduit wiring to be done. . Make: Havells/Plaza/polycab Note : i) Eye/bottle thimbles shall be used for connection in switches/sockets & MCB's in DB's without any extra cost ii) Electric rewiring should be done in proper colour coding i.e. Red for phase, Black for neutral and Green for Earth.iii) Neccessary cutting chasing wherever required and making good the disturbed surface shall be part of job at no extra cost.

All as per item No 138 above, but for one 3/5 pin socket outlet 5 Amp on the same board with other switches complete all as specified and as directed by the Engineer-in-Charge.

All as per item No 138 above, but for one 3/5 pin socket outlet 5 Amp on independent board complete all as specified and as directed by the Engineer-in-Charge.

All as per serial item No 138 here-in-before , but for one socket outlet 15 Amps on independent board with 2.5 Sqmm copper conductor ( Multi-stranded) PVC insulated and unsheating electric cable 1100 volts (ISI Marked) including PVC insulated and unsheathed electric cable 1100 volts 1.5 Sqmm copper stranded conductor as continuous earth wire connected to common earth dolly complete all as specified and as directed by Engineer-in-Charge.

M&L for Modular Socket 6A/16A - 2/3 pin 2 module type all as specified and directed.

M&L for Modular Socket, 6A - 5 pin 2 module type all as specified and directed.

M&L for Modular switch 1 way 6A, 1 module

M&L for Modular switch 1 way 16A, 1 module type all as specified and directed.

M & L for Fan step regulator, 120W - 1 module

Material and labour for ceiling rose surfacemodular type, 65 mm x 50 mm two to three teRunning Metreinals / PVC / polycarbonate, isolated body fixed on PVC block complete all specified and as directed by the Engineer-in-Charge.

Supply and fixing for sub main wiring two single core PVC insulated and unsheathed cable with 10 Sqmm multi -strand copper conductor drawing in PVC concealed conduit with 10 Sqmm PVC copper conductor cable as in earth wire system ,including taking out old wiring complete all as directed. Note: Neccessary cutting chasing wherever required and making good the disturbed surface shall be part of job at no extra cost.

Supply & fix in replacement of existing unserviceable Sheet metal enclosure with new DB’s suitable for MCBs of single pole and neutral 8 way double door type with 200 amp rated bus bar. Note: i) Connnections of the MCB'S shall be done with appropriate size of brass/Cooper thimble. ii) The DB shall be fiush fixed and making good the disturbed surface shall be part of job at no extra cost.

Supply and fix in replacement of MCB SP up to 6-32 Amp all as specified and directed. Make: Havells Cat part No : DHMGBSPF006-032 or equivalent make mentioned in hereinafter.

Supply and fix in replacement of MCB SPN 6-32 Amp complete all as specified and directed. Make: Havells Cat part No DHMGCSNF006-032 equivalent make mentioned in hereinafter.

Supply & fix in replacement of existing unserviceable FTL with new techonlgy self blasted LED retrofit tube lamp with theRunning Metreoplastic body with high lumen 18 w 6500 K suited for installation in existing t5 tubelight including neccessary electric conection with box type batten.

Material and labour for angular modular type lamp holder, PVC/ polycarbonate type with back plate suitable for 7 to 18 watts for batten fitting, complete all as specified.

Supply and fix LED Lamp 15W B22 inverter type all as per Havells or equivalent in Bajaj/CG/Havells/WIPRO/POLYCAB

M&L for earthing complete with galvanized steel earth plate electrode 600x600x6mm tthick buried directly in ground(earth plate not less than 2.25 mtr deep below the noRunning Metreal ground level ) with top edge of plate not less than 1.5 mtr below the noRunning Metreal ground level connected to galvanized earth wire 4mm dia by means of nuts bolts,washers,check nuts of iron or steel including test point PCC pits and RCC cover in PCC 1:2:4 (type B-1) including iron angle fRunning Metree 40*40*6mm. and medium grade GI watering pipe 20mm dia with funnel and wire mesh and 15 mm bore GI pipe light grade proection pipe including excavation and charcoal ,common salt surrounded with 15cm all around the plate all as specified and shown in EP-3 of SSR Part-I

Supply & fix in LED mirror light with Linear & compact 9W mirror light with decorative grey end caps, polycarbonate body and ribbed opal diffuser of capacity 9 watt Model:EDGE LItE Cat part No: LHEXARP6PN1W009 of Havells or equivalent make mentioned in hereinafter,

Supply & lay in replacement of existing unserviceable XLPE insulated, aRunning Metreoured heavy dutyelectric cable with aluminium conductor, 1100 volt grade of crosssectional area 25 Sqmm 3 & 1/2 Core all as specified & directed.

Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtr in depth for laying of cables including getting out in any kind of soil complete all as specified and directed.

Returning filling in including spreading, levelling, and well ramming, in layers not exceeding 25 cm each layer of any kind of soil complete all as specified and directed.

Removing surplus excavated material from site not exceeding 50 mtrs from starting point and depositing where directed at level not exceeding 1.5 mtr above the starting point.

M&L Sand cushioning for cables 8 cm below the cable and 15 cm above the cable all as specified and directed .

Material and labour for old size brick well burnt, laid flat, for cable protection complete all as specified and directed.

Material and labour for replacement of GI tubing light grade 40 mm bore for passing through cables under the floor ,along the wall or along the pole complete all as specified and directed.

S&F in replacement sheet metal enclosures distribution boards,vertical type double door three phase 415 volts 4 ways (one incoming three phase & four out goings three phase )for MCCB,ISOLATOR&MCB,s comprising three phase four wire copper strip bus bar of appropriate capacity complete all as specified and directed and comprising of the following (a)MCCB FOUR POLE 63 AMPS AC 415 VOLTS 16 KA IHLGNF0063 =01 NO as incoming (Note :- (i)The DB shall be VTPN series of MDS-LOADKONTAKT/Havells - CAT PART – DHDPTVODRW04 or equivalent L&T , ABB . (ii) The DB shall be flush fixed ,and making good the disturbed surface matching with existing specifications shall be part of job at no extra cost.(iii)connection of theMCCBs/ MCBs with cable shall be made through appropriate size pin /bottle type thimble -properly crimped.(1v) all the vacant holes of the DB shall be provided with blank plates of appropriate size.

S&F LED building light IP66 powder coated pressure die cast aluminum compact high power LED street light fitting 35 watt with heat resistant toughned glass complete with all acessories make polycab Cat Part No PUB0505007 or equilent make mentioned in hereinafter

Supply and replace environmental friendly, ultra modern, energy saving, surface mounted, decorative oval bulk head edge-lit led luminaire comprising of high brightness leds of capacity10 Watt complete all as specified

M&L for Supply and fixing ceiling fans complete with blades, down rods and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) of Note:- Old u/s C/Fan to be deposited in MES store.

M&L in replacement exhaust fans AC single phase 230/ 240 V of size 450 mm sweep with louvers, BEE, five star rated including fixing the fan with all connecting accessories and making electric connection from c/rose etc. Old u/s E/Fan to be deposited in MES store. Fixing of Exhaust Fan on wall with suitable size anchor bolt, making hole in wall for grouting and making good the disturbed surface including plaster work shall be part of job at no extra cost. Note:- Old u/s C/Fan to be deposited in MES store.

Material and labour for point wiring with 2.5 Sqmm copper conductor (Multi -standed) PVC insulated and unsheating FRLS electric cable 1100 volts cable in and including PVC casing and capining conduit of suitable size (as per conductor run) with all fittings such as bend/corners'accessories and including PVC insulated electric cable 1100 volts 1.5 Sqmm (multi-stranded) copper conductor single core(Green colour) cable as continuous earth wire connected to common earth dolly in CI/PVC/wooden box covered with 3 mm thick plastic laminated sheet complete all as specified and as directed by the Engineer-in-Charge. Note: i) Eye/bottle thimbles shall be used for connection in switches/sockets & MCB's in DB's without any extra cost ii) Electric rewiring should be done in proper colour coding i.e Red for phase, Black for neutral and Green for Earth.

M&L for modular plug & play all-in-one PVC box encloser with protected socket 16A incl MCB SPN 20A for protection device all as specified and directed .

Supply and fix electric water heater, storage type steel body with S/S inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all connecting accessories such as safety valve, theRunning Metreostate, NRV, PVC/CP connection pipe of superior qualitysuitable for hot & Cold water including hanging/fixing the same on wall with suitable size anchor bolt and making good the disturbed surface including plaster work shall be part of job at no extra cost all as specified and directed. Notes :- 1. The quoted rate shall include provision of following complete all as specified and directed (a) The clamps for fixing GI pipe and geysers in plastered/ tiled surfaces shall be fixed using diamond bit. (b) The tile broken/plastered surface disturbed the fixing of GI pipe or geysers shall be make good with the same material with the existing surface as applicable.

S&F stop valve, fancy type chromimum plate angle valve with crunch handle or butterfly handle screwed down high pressure suitable for 15mm bore GI pipewith screwed both ends for GI pipe or for union of 15 mm dia including necessary cutting existing GI water pipe for insertion of stop valve and connected fittings, including repairing the surfaces in CM 1:3 and finishing the surface as per existing treatment complete all as specified and directed.

Supply and fixing Bib tap brass chromium plated fancy type screwed down suitable for 15mm GI pipe with necessary fittings complete all as specified and directed.

Supply and laying GI tubing 'Medium grade' 15mm bore with all necessary fittings like elbow, reducer, T-joint, nipple and passing through brick, walls, ceilling or lay in floor including tapping from existing lines and necessary cutting, repairing and making good disturbed surface with cement morter 1:3 including white wash/distamper as existing to match existing wall etc. complete all as specified and directed.

Buttar Construction Co. (BID ID -3387954)

Jawandha Enterprises (BID ID -3388424)

ANIL KUMAR AND CO (BID ID -3388354)

SWAMI ENGINEERS (BID ID -3388794)