PROVN OF RAIN SHED OVER IMMOLOS SERVER ROOM AND CONCEALMENT OF CORRIDOR WITH GRILL IN FRONT OF STORES AND CERTAIN MINOR WORKS AT AFS KALINA UNDER GE AF THANE

Amount

Demolition of unreinforced concrete is ground floors and pavings n exc 15 cm thickness (below or above ground level) removing debris outside MOD land ,complete all as specified and as directed by Engr-in-charge.

Demolition of reinforced cement concrete in any position and in any description not otherwise specifically provided for ,complete all as specified and as directed by Engr-in-charge.

M&L for 75 mm thick cement concrete type C-2, 1:3:6 (40mm graded aggregate) as in plinth protection finishing even and smouth without using extra cement ,complete all as specified and as directed by Engr-in-charge.

M&L for 75mm thick PCC 1:4:8 type D-2(using 40 mm graded stone aggregate) as in sub base surface ,complete all as specified and as directed by Engr-in-charge.

M&L Hardcore of Broken stone or boulders gauge exc 63 mm but n exc. 100 mm , deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface ,complete all as specified and as directed by Engr-in-charge.

Dismantling of brick work or stone/boulder built in lime mortar or cement mortar including all quins, arches pillars etc but excluding ashlar facing dressed stone work & precast concrete articles for portion ordered to be dismantled and removing debris outside MOD land ,complete all as specified and as directed by Engr-in-charge.

M&L brick work with sub class ‘B’ bricks straight of curved on plan exc 6m mean radius built in in CM 1:6 ,complete all as specified and as directed by Engr-in-charge.

M& L for Brickwork with subclass 'B' bricks, straight or curved on plan to any radius in half brick thick wall built in cement mortar 1:4 ,complete all as specified and as directed by Engr-in-charge.

M & L for cutting out bricks, forming jambs ,toothing for and bondinng new into old work incl value of new materials entering old walls and jointing and pointing in cement mortar (1:4) complete all as specified and directed by Engr-in-Charge.

Cutting holes into or through brick wall built in cement mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B1 not exceeding 150 Sq cm as required ,complete all as specified and as directed by Engr-in-charge.

M&L for Reinforced cement concrete (design mix) in M-30 (20mm graded stone aggregate) for Beams, cantilevers, bressummers, bands on brick walls,lintels over 1.5m span ,complete all as specified and as directed by Engr-in-charge.

M & L for formwork with fair finished surface to side of soffits of floors, or roof beam, beam haunchings, girders, bressummers,lintels, cantilevers, shelves incl sup-posts, overhang etc, also splays bet floor and beams etc ,complete all as specified and as directed by Engr-in-charge.

M&L formwork to sides of pillars, posts, struts, piers, columns and stanchions for fair finished surfaces ,complete all as specified and as directed by Engr-in-charge.

M& L for TMT bars 8 mm dia and over in reinforcement, cut to length, bent to shape required,including cranking and binding with mild steel wire (anneled) not less than 0.9 mm dia for stirrups ,complete all as specified and as directed by Engr-in-charge.

M&L for TMT bars 10mm dia and over in reinforcement, cut to length, bent to shape required,including cranking and binding with mild steel wire (annealed) not less than 0.9 mm dia ,complete all as specified and as directed by Engr-in-charge.

Removing demolished materials/debris to a distance exc 13.50 KM and n exc 15 KM and depositing outside MD land ,complete all as specified and as directed by Engr-in-charge.

M & L for cement concrete 150 mm thick in sub floor , sub base, floors and pavings cement concrete type C-2, 1:3:6 (using 40mm graded stone aggregate) ,complete all as specified and as directed by Engr-in-charge.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises

M&L for light shade vitrified ceramic tiles 10mm thick (square/rectangular) polished area of each tiles not exceeding 0.36 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over Screed bed or bedding layer or mortar 15mm layer of mortar 15mm thick for laying floor finishes in CM 1:6 ,complete all as specified and as directed by Engr-in-charge.

M&L for light shade vitrified ceramic tiles 10mm thick (square/rectangular) polished area of each tiles not exceeding 0.36 sqm in Skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick in CM 1:4 as backing coat to receive skirting ,complete all as specified and as directed by Engr-in-charge.

Machine cut kota stone slab flooring 20-25mm thick over Screed bed or bedding layer or mortar 15mm thick for laying floor finishes in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing ,complete all as specified and as directed by Engr-in-charge.

M&L for 900x450x7mm thick glazed coloured ceramic tiles as in vertical surface and jointed in neat cement slurry including rendering 10 mm thick in cement mortar (1:4) as in backing coat for fixing of tiles in vertical surfaces ,complete all as specified and as directed by Engr-in-charge.

M & L for Granite (of any type) tiles 18 to 20 mm thick machine cut,bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting,waste and machine cutting,round cutting for sink fittings etc, grinding and polishing on floor,platform ,complete all as specified and as directed by Engr-in-charge.

M & L for Granite (of any type) tiles 18 to 20 mm thick machine cut, in skirting/dado laid over backing coat of 10mm thick for laying granite in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing ,complete all as specified and as directed by Engr-in-charge.

M & L for Machine cut cudappah stone slab 20 to 25 mm thick over screed bed of 15mm thick for laying cudappah stone in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing ,complete all as specified and as directed by Engr-in-charge.

M & L for Green marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match the marble shade ,complete all as specified and as directed by Engr-in-charge.

S & F in 15 mm size Kitchen sink faucet with pull down sprayer in stainless steel Dratal pull out sprayer faucet kitchen flexi spout brushed steel (DT-1) ( item diamentions - 32cm X 8cm x 8cm )complete all as specified and as directed.

M & L for rounding the edges of stone slabs one edge, such as in steps, cooking platform and other simillar situations ,complete all as specified and as directed by Engr-in-charge.

M & L for Granite (of any type) tiles12mm thick , pattern plane , size 1200mm X 300MM and 1200mm x 600mm , Make:- SOMANY CAT No. SKU: T41S168000001104 for staircase , floor including screed bed or bedding layer of mortar 15mm thick cement plaster 1:6 for laying floor finishes. etc ,complete all as specified and as directed by Engr-in-charge.

M & L for Vitrified ceramic tiles double charge , dark shade 8mm thick (square/rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 Sqm, in floor etc. set and jointed in neat cement slurry and pointed in white or colour cement to match including screed bed or bedding layer of mortar 15mm thick cement plaster 1:6 for laying floor finishes ,complete all as specified and as directed by Engr-in-charge.

M & L for racking , cutting and waste on glazed tiles ,complete all as specified and as directed by Engr-in-charge.

S&F sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed by Engr-in-Charge.

M&L for complete removal of existing treatment on wall and appying 3mm thick wall care putty .Thereafter applying two coats of oil bound distemper over a coat of primer complete all as specified and as directed.

Taking down cement plaster on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc ,complete all as specified and as directed by Engr-in-charge.

M&L for 10 mm thick cement plaster on Brick or concrete surfaces in CM 1:6 ,complete all as specified and as directed by Engr-in-charge.

M&L 3mm thick wall care putty on wall ,complete all as specified and as directed by Engr-in-charge.

M&L for Preparing new plastered surfacesof wall, priming plastered and other surfaces with alkali resistant priming paint, and applying two coat of OBD ,complete all as specified and as directed by Engr-in-charge.

M&L for 15 mm thick cement plaster on stone or concrete surfaces in CM 1:4 mixed with water proofing compound @ 3% by weight of cement ,complete all as specified and as directed by Engr-in-charge. [Note:- WPC shall be measured and paid separately ]

Supply of integral water proofing compound ,complete all as specified and as directed by Engr-in-charge.

M&L for preparation of newly plasterd surface of concrete or brick surfaces and applying Two coats ( having proportion @1.67 Litr/10 Sqm) of acrylic smooth exterior paint of required shade and including priming coat of exterior primer applied @ 2.20 Kg / 10 sqm, complete all as specified and as directed by Engr-in charge.

M&L for rendering 10mm thick in CM 1:4 on fair faces of ceiling ,complete all as specified and as directed by Engr-in-charge.

M&L for 3mm thick one coat of wall care putty on new ceiling surfaces ,complete all as specified and as directed by Engr-in-charge.

M&L for washing,rubbing down and removal of existing surfaces and stopping of distempered of old painted surfaces of wall and applying Two coats ( having proportion @1.67 Litr/10 Sqm) of acrylic smooth exterior paint of required shade and including priming coat of exterior primer applied @ 2.20 Kg / 10 sqm, complete all as specified and as directed by Engr-in charge.

Material and labour for preparation of new plastered surfaces on ceiling and applying two coats of oil bound distemper over a coat of alkali resistant priming paint all as specified but on ceiling ,complete all as specified and as directed by Engr-in-charge.

M&L for preparing old plaster surfaces scrapping of walls and applying one coats of oil bound distemper ,complete all as specified and as directed by Engr-in-charge.

M&L for preparation of old surfaces plastered or unplastered on old surfaces of ceiling and apply one coat of oil Emulsion distemper on ceiling ,complete all as specified and as directed by Engr-in-charge.

M&L for preparation of old wooden surfaces of any description, not otherwise described over 10 cm width or girth and apply one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of existing treatment on surfaces of wall, chajjas etc in any position washing down with water and cleaning the surface from all loose dirt chalk grease fungi algal flakes etc and applying one coat of weather proof acrylic emultion paint all as per manufacturers instructions and directed including scaffolding complete all as specified by GE/Engineer-in-Charge Make : Asian Paint Apex, Berger weather coat or equivalent

M&L for preparation of existing treatment on surfaces of wall, chajjas etc in any position washing down with water and cleaning the surface from all loose dirt chalk grease fungi algal flakes etc and applying two coats of damp proof paint Make Asian : Smartcare White Damp Proof, CAT No. 1048 all as per manufacturers instructions and directed including scaffolding upto 10m height ,complete all as specified and as directed by Engr-in-charge.

S&F,in reapir 1000 Ltr rotational moulded polyethylene water storage tanks of triple layered (cylindrical vertical with closed top) white in colour hoisted and fixed in position upto 10m height of slab all as specified in SSR Part I ,complete all as specified and as directed by Engr-in-charge.

S & F in repairs JG Company Vanity Mirror Cabinet for Washbasin | Premium Wall Mounted Storage Cabinet Bathroom with Door | Multipurpose Bathroom Cabinet Rack with Mirror (White) size 54D x 35W x 12H Centimeters, Wall Mount , Plastic etc complete all as specified and as directed by Engr-In-Charge.

S &F for 75mm bore PVC (SWR) pipes single socketed, in any length with rubber rings joints,laid in trenchesor in floors ,complete all as specified and as directed by Engr-in-charge.

S & F 75mm bore PVC (SWR) bends any radius ,complete all as specified and as directed by Engr-in-charge.

S & F 75mm bore PVC (SWR) 'P' trap ,complete all as specified and as directed by Engr-in-charge.

S & F 75mm bore PVC (SWR) Couplers ,complete all as specified and as directed by Engr-in-charge.

S & F in repairs Stack clamps out of 50mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 75mm to 100 mm dia pipe ,complete all as specified and as directed by Engr-in-charge.

S & F PVC 160 mm bore Rainwater drainage pipes , waste, soil ,(SWR) PVC SWR pipes single socketed in any length with ubber ring joints fixed to wall ,complete all as specified and as directed by Engr-in-charge.

S & F in repairs PVC 110 mm bore Rainwater drainage pipes , waste, soil ,(SWR) PVC SWR pipes single socketed in any length with ubber ring joints fixed to wall ,complete all as specified and as directed by Engr-in-charge.

S & F PVC (SWR) bends 160 mm bore any radius ,complete all as specified and as directed by Engr-in-charge.

S & F in repairs PVC (SWR) bends 110mm bore any radius ,complete all as specified and as directed by Engr-in-charge.

S & F in repairs PVC 110mm bore (SWR) coupler ,complete all as specified and as directed by Engr-in-charge.

S&F grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40 gms) ,complete all as specified and as directed by Engr-in-charge.

S&F grating doom grating doom 100 mm dia with waste hole of PTMT (Minimum weight 25 gms) ,complete all as specified and as directed by Engr-in-charge.

S&F PVC connections for 15mm size with PTMT nuts of length 600mm ,complete all as specified and as directed by Engr-in-charge.

S&F PVC connections for 15mm size with PTMT nuts of length 900mm ,complete all as specified and as directed by Engr-in-charge.

S&F PVC (SWR) multi floor trap 75mm with grating including jointing with solvent cement ,complete all as specified and as directed by Engr-in-charge.

S&F PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement ,complete all as specified and as directed by Engr-in-charge.

Supply and fix in repairs 25 mm bore mild steel heavy duty drapery rod (curtain rod) with 1.0 mm thick decorative PVC lining / sleeve outside, cut to length and fix in position including decorative type FINIALS (bracket) colored finish, of approved pattern complete as per sample kept in GE Office ,complete all as specified and as directed by Engr-in-charge.

S &F grating doom 100mm dia of PTMT (Min wt 25 gms) ,complete all as specified and as directed by Engr-in-charge.

S & F Liquid soap container of PTMT fixed with and including Chromium plated brass screws and wooden / plastic cleats.(Min wt 150gms) ,complete all as specified and as directed by Engr-in-charge.

S & F Towel ring of PTMT fixed with ans including Chromium plated brass screws and wooden / plastic cleats (min wt 90 gms) ,complete all as specified and as directed by Engr-in-charge.

S &F PVC connections 15mm size with PTMT nuts of length 900mm ,complete all as specified and as directed by Engr-in-charge.

S&F in repairs 15 mm size bib tap Make - CERA , CAT No. F1020151 ,complete all as specified and as directed by Engr-in-charge.

S&F in repairs 15 mm size stop valve or angle valve cast copper alloy, chromioum plated fancy type, screwed down, high pressure with capston head, screwed both ends for iron pipe or for union ,complete all as specified and as directed by Engr-in-charge.

S&F in repairs 15 mm size stop valve with long shank (consealed type) cast copper alloy, chromioum plated fancy type, screwed down, high pressure with capston head, screwed both ends for iron pipe or for union ,complete all as specified and as directed by Engr-in-charge.

S & F in repairs 15mm size 2-way Bib cock with single handle and wall flange, Chrome Plating, ,complete all as specified and as directed by Engr-in-charge. Make : CERA Cat No. : F1020163

S&F in repairs 15 mm size stop cock consealed type ,complete all as specified and as directed by Engr-in-charge. Make :- CERA CAT No. F1020361

S&F in repairs 15 mm size stop valve, Angle cock ,complete all as specified and as directed by Engr-in-charge. Make CERA CAT No. F1020201

S & F in repairs 15mm size 2-way Bib cock with single handle and wall flange, Chrome Plating, ,complete all as specified and as directed by Engr-in-charge. Make : CERA Cat No. : F1020163

S&F,in repair, vitreous china white Table top wash basin having size 450mm x 400mm x 160 mm , Rectangle bowl, Snow White in colour , ,complete all as specified and as directed by Engr-in-charge. Make:- CERA , Cat No. : S2020101

S & F, in repair , 20 mm size gun metal, globe or gate valve with iron wheel head screwed both ends for iron pipe ,complete all as specified and as directed by Engr-in-charge.

S&F, in repair, 15 mm size stop valve of PTMT any colour high pressure screwed for iron pipe, weight not less than 90 gms, ,complete all as specified and as directed by Engr-in-charge.

Material and labour ,in repair, 15 mm bore mild steel galvanized water tubing, medium grade with all fitting and accessories complete concilled,fixed to walls / ceiling or laid to floors including taking up or down old tubing and connected fitting, fixture ,complete all as specified and as directed by Engr-in-charge.

Taking up or down 20 mm bore steel water tubing including connected fitting, fixture, and disconnection of fitting fixture etc. from tubing ,complete all as specified and as directed by Engr-in-charge.

Re-fixing of old serviceable 20 mm bore galvanized iron tubing medium grade retrieved from item No 132 here-in-before, after cleaning of tube and including all fittings and fixtures fixed to walls / ceiling or laid to floors ,complete all as specified and as directed by Engr-in-charge.

Material and labour 20 mm bore mild steel galvanized water tubing, medium grade with all fitting and accessories complete fixed to walls / ceiling or laid to floors ,complete all as specified and as directed by Engr-in-charge.

Supply and fix in repairs 32 mm size waste pipe, length 1.20m for wash hand basin / urinal / sink ,complete all as specified and as directed by Engr-in-charge.

Supply and fix in repairs 40 mm size waste pipe length 1.20m for wash hand basin / urinal / sink ,complete all as specified and as directed by Engr-in-charge.

Supply and fix in repairs 32 mm size waste coupling of PTMT for wash hand basin / urinal / sink complete ,complete all as specified and as directed by Engr-in-charge.

Supply and fix in repairs 40 mm size waste coupling of PTMT for wash hand basin / urinal / sink ,complete all as specified and as directed by Engr-in-charge.

Supply and fix in repairs Hand shower (Health Faucet) brass chromium plated with 8 mm Dia & 1 meter long flexible tube and wall hook ,complete all as specified and as directed by Engr-in-charge.

S & F in repairs 15 mm high density polyethylene (HDPE) pipes of pressure rating 6 kgf/sq.cm concealed pipe fittings etc ,complete all as specified and as directed by Engr-in-charge.

S & F in repairs 20 mm high density polyethylene (HDPE) pipes of pressure rating 6 kgf/sq.cm concealed pipe fittings etc ,complete all as specified and as directed by Engr-in-charge.

S&F in repairs 10 Ltr capacity PVC syphonic action type flushing cistern low level with inlet ball valve, float and handle, fixed in position and connecting ,complete all as specified and as directed by Engr-in-charge.

S&F vitreous china white wash hand basin 550 mm x 450 mm including all necessary fitting such as 15 mm CP pillar cock fancy type, CP waste coupling 32mm dia, PVC waste pipe and brackets including supply and grouting 6 to 8 mm dia GI racket bolt at the back side of WHB and making good existing surfaces, including taking down old wash hand basin ,complete all as specified and as directed by Engr-in-charge.

S&F in repairs 15 mm size brass chromium plated zig zag type connector (coupling) for connecting wall mixer and GI tubing ,complete all as specified and as directed by Engr-in-charge.

S & F in repairs 6 mm thick corner glass self with aluminum / SS railing incl brackets for fixing ( size 300 mm x 300 mm ) etc ,complete all as specified and as directed by Engr-in-charge.

S & F in repairs 6 mm thick rectangular glass self with aluminum / SS railing incl brackets for fixing ( size 450mm x 150 mm )etc ,complete all as specified and as directed by Engr-in-charge.

Supply and fix in repairs 15 mm size wash hand basin mixer, for mixing hot & cold water, cast copper alloy, chromium plated with capstan head comprising single hole bib tap with all connected accessories ,complete all as specified and as directed by Engr-in-charge.

S&F 9 mm thick prelaminated particle board interior grade, prelaminated both sides with decorative choice laminations fixed with screws to timber frame work ,complete all as specified and as directed by Engr-in-charge.

S&F Galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm ,complete all as specified and as directed by Engr-in-charge.

Repairs to Aluminium window shutters of any description easing & adjusting without taking down area exc 1 sqm but n. exc 2.90 sqm incl repairs to lock , roller,glass wool,rubber biddings,refixing of wiremesh excl glass etc ,complete all as specified and as directed by Engr-in-charge.

S & F 3 mm thick sheet glass ordinary quality and glazing with oil putty/wooden lapping in square not exc 0.58 Sqm each in each pane ,complete all as specified and as directed by Engr-in-charge.

M&L for Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows,ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight,mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling,Aluminium composite panel,C.P. brass/ stainless steel screws, all complete as per architectural drawings ,complete all as specified and as directed by Engr-in-charge.

S & F 5.5 mm thick sheet glass ordinary quality area exc 0.50 Sqm in each pane and glazing for aluminum frame work all as specified and as directed by Engr-in-Charge

S&F Magnetic catches for cupboard doors No.2 ,complete all as specified and as directed by Engr-in-charge.

S & F in repair , aluminium anodised barrel towel bolts of extruded section of length 150 mm ,complete all as specified and as directed by Engr-in-charge.

S & F in repair,stainless steel butt hinges medium weight SS of size 100 mm by welding to existing frame ,complete all as specified and as directed by Engr-in-charge.

S & F in repair, aluminium extruded alloy handles fabricated type anodised of size 150 mm ,complete all as specified and as directed by Engr-in-charge.

S&F for 2nd class hard wood (Sal) plain solid straight chawkats and frames brought, framed rebated on solid rounded or chamfered put together with glue pinned at jointed ,complete all as specified and as directed by Engr-in-charge.

S & F ,in repair, hasp and staple safety type of size 100 mm of aluminium anodized including taking down old hasp and staple all as specified and as directed.

S&F in repair mild steel 300mm ordinary rat tail rod pettern springs including roller and roller plate ,complete all as specified and as directed by Engr-in-charge.

M&L for 25 x 3mm FI holdfasts ,complete all as specified and as directed by Engr-in-charge.

Taking down chowkats or frame exc 1.5 sqm but n.exc 4 sqm each with shutters (without taking off shutters from the frames) ,complete all as specified and as directed by Engr-in-charge.

Taking down shutters only of any description exc 1sqm and n exc 2 sqm each ,complete all as specified and as directed by Engr-in-charge.

Re-securing or easing and adjusting without taking down shutters of any description and size all as specified and as directed.

S&F for 2nd class hard wood (Sal) plain solid straight chawkats and frames brought, framed rebated on solid rounded or chamfered put together with glue pinned at jointed ,complete all as specified and as directed by Engr-in-charge.

S&F in repairs Model No.- A1T-FD2 ,Make-A-1 teak product , 30 mm thick flush shutters,both side laminations , solid core construction, with Block board core and plywoood face panels, commercial type on both sides with one face is covered with decorative face veneer with lipping/frame to match ,complete all as specified and as directed by Engr-in-charge.

S&F in repairs Model No- A1T-WM4 ,Make-A-1 teak product,30mm thick 2nd class hard wood glazed and skelton shutters divided into squares with plain chamfered or reounded miltred and related sash bars number to received glass gauze etc edges of framing plain chamfered or reounded fitted with cut,incl both side laminations,and mitred beads for securing glass etc size of members of shutters as specified in SSR Part-I section 8 clause 8.20(a) supplied and fitted to chawkats ,complete all as specified and as directed by Engr-in-charge.

S&F 30 mm thick flush shutters, solid core construction, with Block board core and plywoood face panels, commercial type on both sides with one face is covered with decorative face veneer with lipping/frame to match ,complete all as specified and as directed by Engr-in-charge.

S&F for 35mm thick 2nd class hard wood glazed and skelton shutters divided into squares with plain chamfered or reounded miltred and related sash bars number to received glass gauze etc edges of framing plain chamfered or reounded fitted with cut and mitred beads for securing glass etc size of members of shutters as specified in SSR Part-I section 8 clause 8.20(a) supplied and fitted to chawkats ,complete all as specified and as directed by Engr-in-charge.

S&F for 30mm thick 2nd class hard wood glazed and skelton shutters divided into squares with plain chamfered or reounded miltred and related sash bars number to received glass gauze etc edges of framing plain chamfered or reounded fitted with cut and mitred beads for securing glass etc size of members of shutters as specified in SSR Part-I section 8 clause 8.20(a) supplied and fitted to chawkats.

S & F in repair,20 mm dia aluminium anodised tubular curtains rod with powder coated ,complete all as specified and as directed by Engr-in-charge.

S & F 3 mm thick sheet glass ordinary quality and glazing with oil putty/wooden lapping in square not exc 0.58 Sqm each in each pane all as specified and as directed.

S & F 3 mm thick Figure glass/ tinted glass ordinary quality and glazing with oil putty/wooden lapping in square not exc 0.58 Sqm each in each pane, lovers etc all as specified and as directed.

S & F 5.5 mm thick sheet glass ordinary quality area exc 0.50 Sqm in each pane and glazing for aluminum frame work all as specified and as directed by Engr-in-Charge

Extra over rates for external teak wood lipping 6 mm thick fixed with nails ,complete all as specified and as directed by Engr-in-charge.

Removing of existing water tank of capacity 500 lit, 1000 lit & 2000 lit and refixing the same after completing the water proofing treatment etc as directed by Engr-in-Charge.

Removing of existing water tank of capacity 1000 lit and refixing the same after completing the water proofing treatment etc as directed by Engr-in-Charge.

Removing of existing water tank of capacity 2000 lit and refixing the same after completing the water proofing treatment etc as directed by Engr-in-Charge.

Re-securing or easing and adjusting without taking down shutters of any description and size ,complete all as specified and as directed by Engr-in-charge.

M & L in repairs (wooden ) fillet work using 2nd class hard wood exc 6 & n. exc 13 sq.cm fixed with screw, plane fillet square, rectangle in section clean swan, secuared with nails or brads making frame for wiremesh fixing ,doors etc incl making good to existing surface complete all as specified and as directed.

M&L for prepartion new wooden surfaces of any description, not otherwise described any width or girth and applying two coats of synthetic enamed paint over a coat of pink primer ,complete all as specified and as directed by Engr-in-charge.

S&F 150 mm size of handle extruded aluminium alloy handle febricated type anodised ,complete all as specified and as directed by Engr-in-charge.

S&F aluminium andodized, 150mm length of bolt barrel tower bolts of extruded section ,complete all as specified and as directed by Engr-in-charge.

M&L for prepartion new wooden surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamed paint over a coat of pink primer ,complete all as specified and as directed by Engr-in-charge.

S&F floor door stoppers of aluminium alloy body and toungue anodized with hard drawn steel spring over all length 140mm ,complete all as specified and as directed by Engr-in-charge.

M& L for Floor door stopper 150mm long , of brass body and tongue, anodised, with hard drawn steel spring, fixed in floor ,complete all as specified and as directed by Engr-in-charge.

S & F aluminium anodised brackets powder coated to match with rod for curtain rod of 20mm dia ,complete all as specified and as directed by Engr-in-charge.

S&F 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished ,complete all as specified and as directed by Engr-in-charge.

S & F Hat pegs Brass, solid body, 125mm to 175 mm ,complete all as specified and as directed by Engr-in-charge.

M & L in repairs stainless steel 'L' shape soft closing spring hinges for cabinets shutters complete all as specified and directed by Engr-in-Charge

M & L in repairs for Plywood 12mm thick grade BWR type BB fixed with screws to timber frame ,Al frame etc ,complete all as specified and as directed by Engr-in-charge.

M&L preparing of surfaces of wood and treatng with tar or coal tar black paint to ends of post backs of chowkats etc area tarred exc 0.10 sqm but n.exc 0.50 sqm ,complete all as specified and as directed by Engr-in-charge.

M&L for solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, suppling & fixing will be painted to match with printed sheet ,complete all as specified and as directed by Engr-in-charge.

M&L for Factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded palin colour PVC `C' channel heaving a PVC sheert strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bbottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

Supply&Fix decorative Laminate type 1 of any thickness of surface finish, colour and pattern as approved, fixed with approved adhesive on plywood as per manufacturer instruction ,complete all as specified and as directed by Engr-in-charge.

S&F door sliding bolt aldrop 250 mm long aluminium anodised ,complete all as specified and as directed by Engr-in-charge.

S &F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) 300 mm length of bolt and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed ,complete all as specified and as directed by Engr-in-charge.

S & F overall 100mm thick gypsum partition max upto 3.66 m height including layer of tapered edge 12.5mm thick plain Gypsum Board screwed fixed with drywll screws to either side of 70mm GI C stud (0.50mm thick & size 70MMX34MM36MMX6MM) placed vertically at 610mm centre to centre in 72mm G.I. floor & ceilng channel (0.50mm Thk & Size 72X32X32) fixed at top & bottom using suitable self tapping screws /metal screws. 50mm thk Rockwoool of 48 Kg density to be inserted as infill material between the partition, fixed board with staggered joints. Edges of all boards to be taper finished, joints finished incl. filling finishing using jointing Compound also 3mm thick putty on external surface with 1 coat of primer and 2 coat of Oil bound distemper complete.

Dismantling plain or corrugated steel sheeting,any gauge,thickness, including Nainital or similar pattern roof covering in any position including necessary steel double scaffolding complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified and as directed.

S & F for Steel work in tubular trusses and similar works including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240,etc for ornamental and insttricate design complete all as spd and directed.

S & F for Plates (plain ) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted,bolted or welded attachment, Fe 410-W (Gde-E-250) quality-A,flat iron, etc with ornamental and intricate design complete all as spd and directed.

S & F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering, fixed with self tapping screws as specified etc complete all as specified.

S&F pre-painted Galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof ridge covering, fixed with self tapping screws using necessary scaffolding as specified and directed.

S & F for Mild steel screw bolts ( Machine made) with hexagonal or square heads at one end and screws the other or screwed both ends. each screwed and to be fitted with washers and one hexagonal or square nut length at bolt exceeding 5 cm but not exceeding 10 cm long for 11 to 15mm dia of neck ,complete all as specified and as directed by Engr-in-charge.

S & F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and Grill on drain etc similar work con- forming to Fe.290.Gde-E-165 ,complete all as specified and as directed by Engr-in-charge.

S & F Collapsible steel gates, top hung,consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners withhold fasts and brackets, as per SSR part -1 & part 2 complete all as specified and as directed by Engr-In-Charge.

M& L for Preparation of new steel surface of any description and treated with tar or coal tar black paint ,complete all as specified and as directed by Engr-in-charge.

M&L for Preparation of new steel surface not otherwise described and applying two coats of Aluminium paint over a coat aluminium red oxide primer ,complete all as specified and as directed by Engr-in-charge.

M& L for Post construction Anti termite treatment of soil under existing floors using emulsion chloropyrphos treatment of soil under hole, 300mm apart including drilling and plugging 12mm dia holes with cement morter 1:2 (1 cement : 2 coarse sand) to match existing floors complete all as specified and directed by Engr-in- charge.

M& L for providing and injecting chemical chloropyrphos emulsion (with 20% EC) for post construction antitermite treatment along external wall below concrete or masnory apron @ 2.25 Ltr per running meter including drilling and plugging complete all as specified and directed by Engr-in- Charge.

M& L for Post construction Anti termite treatment at point of contact of wood work by chemical emulsion Chloropyrphos (20EC) (in oil or kerosene based solution) @ 0.5 Ltr/ hole by drilling 6 mm dia hole at a downward angle of 45 degree at 150mm centre to centre and sealing the same complete all as specified and directed by Engr- in -Charge.

S & F in repairs 40 mm dia cupboard knobs fixed with nut, screw and washer of mild steel bright finished ,complete all as specified and as directed by Engr-in-charge.

Note for all Item Included in BOQ: 1.The contractor shall deploy skilled tradesman i.e. carpenter, plumber , mason , welder etc with his helper. All workers need to be having police verification for Airport entry (MIAL) and required T&P , and collect the complaints slips daily morning from AGE B/R (AF) Kalina office by the contractor/supervisor and same shall be resubmitted at evening within completion of job duly signed by user. 2.In case of failure to attend the complaint within 48 hrs the contractor shall be charged @400 Rs per complaint against outstanding complaint. 3.After Perodical service of the Qtr/building the contractor will clean all the paint marks from glass panes , electric switch boards and fittings , doors windows and should clean the floor , dado and all scraped material shall thrown away from MOD land without any extra cost.

Maaz Construction