SPECIAL REPAIRS TO BLDG NO. 44 (04 JCOs MD ACCN) IN RAJENDRA LINE AT KASAULI CANTT UNDER GE KASAULI

Amount

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified.

Dismantling timber scantlings 40 sq. cm and over in section, in any position (Unframed work) complete all as specified.

Dismantling timber scantlings in any position in fillets, rails, posts, rafters , purlins, etc. under 40 sq. cm in section (Unframed work) complete all as specified .

Second class hard-wood, timber fixed and clean sawn, in scantlings complete all as specified.

All as per serial item no 04 here-in-before ditto but except timber complete all as specified.

Preparing surfaces of wood and wood based materials, new or old of any description and girth, not otherwise described and treated with creosote complete all as specified.

0.63mm thick, galvanised, corrugated mild steel sheeting with two corrugations side lap,fixed with J Hook/L Hook in lieu of coach screw in roofs, walls etc. with grade of zinc coating 275, complete all as specified.

0.63mm thick, plain, galvanised, mild steel sheeting, in ridges,hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified.

4 mm thick Non asbestos fibre cement building boards fixed in repair or laid/ inserted to timber/GI/Aluminium framework with screws complete all as specified.

Second class hard wood plain fillets, square, rectangular or triangular in section, and secured with nails or brads, clean sawn, sectional area exc 13 sq.cm and not exc 25 sq.cm complete all as specified.

Second class hard wood plain fillets, square, rectangular or triangular in section, and secured with nails or brads, clean sawn, sectional area exc 06 sq.cm and not exc 13 sq.cm complete all as specified.

Preparation of new non AC ceiling boards surfaces of any description over 10 cm width or girth, not otherwise described and applying two coats of white wash complete all as specified.

Second class hard wood 20mm thick boarding, planed one side with butt joints, fixed with nails including dismantling old boarding complete all as specified.

Taking down chowkats or frames without taking down shutters, not exc. 1.5 sq. each complete all as specified.

Taking down chowkats or frames without taking down shutters exc. 1.5 sq. m but n.exc.4 sqm each complete all as specified.

Taking down shutters of any description n exc 1 sq. m each complete all as specified.

Taking down shutters of any description exc 1 sq. m and not exc 2 sq. m each complete all as specified.

Second class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified.

Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site complete all as specified.

Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube, suppling & fixing in opening complete all as specified.

35mm thick, second class hard factory made wood plain framed, panelled shutter (two panel) with lock rail and panel of 9mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS:1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified.

Second class hard wood 35mm thick factory made glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters complete all as specified

30mm thick second class hardwood factory made glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, for securing glass, etc.; fitted to chowkats , windows, ventilators etc. provided with stiles and rails complete all as specified.

Galvanized mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanized wire staples complete all as specified.

Cold rolled mild steel medium butt hinges IS Marked 100mm size complete all as specified.

Cold rolled mild steel medium butt hinges IS Marked 75 mm size complete all as specified.

200mm long mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed complete all as specified.

150mm long mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed complete all as specified.

300mm long mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified.

150mm mild steel pressed handles, oval type, stove enamelled black complete all as specified.

125mm mild steel pressed handles, oval type, stove enamelled black complete all as specified.

300mm brass ordinary rat tail rod pattern springs including roller and roller plate complete all as specified.

3mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane fixed with glass putty fixed in repair complete all as specified.

Demolition of Cement concrete (Unreinforced) of any description in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified.

75mm thick PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in sub base of floor complete all as specified.

Taking down cement or cement lime plaster of any description on brick or stone walls etc including raking out joints hacking for key scrubbing down with water etc complete all as specified.

Rendering 15mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces surface finished even and smooth with out using extra cement on external surfaces complete all as specified.

Rendering 15mm thick in cement mortar 1:6 on other than fair faces of brick work or concrete surfaces surface finished even and smooth without using extra cement on internal surfaces complete all as specified.

PCC 1:3:6 type C2 (using 40 mm graded stone aggregate) as in surface channels and drains complete all as specified.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc,complete all as specified.

Extra for forming fair finished drain or channel 75 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc,complete all as specified.

Cement concrete 1:3:6 type C1 (using 20mm graded stone aggregate) as in plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified.

Glazed coloured cermaic tiles Jointless of Size (300mmx450mm)x7mm thick as in vertical surfaces of walls, set and jointed in neat cement slurry and pointed in coloured cement to match, over and including 15mm thick rendering in cement mortar 1:4 complete all as specified.

Non-Skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed or bedding layer in CM 1:6 complete all as specified.

Coloured prepolished chequered cement concrete tiles (30cmx30cmx25mm thick) in white cement and pigment in floors etc , set and jointed in neat cement slurry, over and including 20mm thick screed bed in cement mortar 1:4 complete all as specified.

20mm thick granite slab ( of any type) work ( table rubbed and polished ) in platform,urinal portion and the like in CM 1:4 including pointing in white cement 1:2 using marble dust and admixture of pigment to match the shade of granite including circular cutting or notching for fixing WHB and counter over and including 20mm screed bed in CM 1:4 fixed in repair complete all as specified.

Machine cut kota stone slab flooring 18-20mm thick over and including 20 mm thick cement screed base in CM (1:4) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified.

PVC tiles / sheets 1.50 mm thick laminated plain coloured, marbled mosaic or mottled finish, laid with approved rubber based adhesive in floors including taking down old sheet complete all as specified.

40 mm second class hard wood boarding in floors and skirting, planed one side, with butt joints and fixed with nails to existing floors in patches, including cutting out, piercing, heading joints etc fixed in repair complete all as specified.

40mm thick PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in floor finished even and smooth using extra cement complete all as specified.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits,manholes, pier holes, etc. n exc 10 sq m on plan and getting out in hard / dense soil complete all as specified.

Hardcore of broken stone broken to gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified

Plain cement concrete 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in foundation filling & mass concrete, complete all as specified.

Demolition of brickwork/stone work built in cement mortar including all quoins,arches, pillars etc complete all as specified.

Brickwork with subclass 'B' bricks straight or curved on plan exc 6m mean radius , built in CM (1:6) complete all as specified.

Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:6 complete all as specified.

All as per item No. 57 above but except stone (stone obtained from demolition of stone masnory shall be used).

Raised pointing to random or polygonal rubble (old or new), uncoursed or brought upto courses in cement mortar 1:4 complete all as specified.

Galvanized mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staples fixed in repair complete all as specified.

Vitreous china wash basin, white, flat back, size 550x400mm including cutting for and pinning in ends of brackets or erecting stand including 15mm bore brass chromium plated pillar tap fixed in repair complete all as specified.

75mm bore dia cast iron floor trap, with grating including jointing to waste pipe fixed in repair in cement concrete 1:2:4 type B1 (using 20 mm graded stone aggregate) complete all as specified.

1000 litres rotational moulded polyethylene water storage tanks (three layered) (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including dismantling old water tabk and removing from site complete all as specified.

Bib taps fancy type cast copper alloy chromium plated screwed down screwed for iron pipe, 15mm bore, fixed in repairs complete all as specified.

15mm bore stop valves fancy type, cast copper alloy, chromium plated, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed in repairs complete all as specified.

Brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges fixed in repairs complete all as specified.

15mm bore GI tubing medium grade with all fittings and fixed complete to walls and ceilings or laid in floors fixed in repair complete all as specified.

20mm bore GI tubing medium grade with all fittings and fixed complete to walls and ceilings or laid in floors as in repair complete all as specified.

110 mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors fixed in repair complete all as specified.

Brass chromium plated soap dish fixed to plugs with chromium plated brass screws fixed in repair complete all as specified.

Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required; hooks (stay), heavy, for large gates; hook and pintle hinges; large haspe and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe 410-0 complete all as specified.

1mm thick white cement based wall care putty on walls complete all as specified.

Preparation of newly plastered surfaces of wall & applying two coats of oil emulsion distemper over a coat of primer complete all as specified.

Preparation of newly plastered external surfaces of wall & applying two coats of cement based paint over a coat of primer complete all as specified.

Preparation of plastered or unplastered old surfaces of walls and applying one coat of cement based paint of approved tint complete all as specified.

Preparation of new wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified.

Preparation of old painted wooden surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint complete all as specified.

Central hole basin mixer with regular spout without Popup waste system with 450mm long braided hoses, 20mm cartridge size, fixed in repairs complete all as specified. Make: Prayag Cat No. 8750 or its equivalent in the makes mentioned in Appendix 'B'.

Wall mixer, fancy type, chromium plated,non- telephonic 15mm bore including connected accessories fixed in repairs complete all as specified. Make: Jaquar Cat No. FLR-5219N or its equivalent in the makes mentioned in Appendix 'B'.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified.

Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified.

Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, conforming to Fe.290.Gde-E-165 for portions framed and hung as gates, including pintle hinges, stops, hand-made sliding bolts, etc. complete all as specified.

Welded steel wire fabric fixed to wood or steel members weight per square metre not exc 4 kg complete all as specified.

Preparing new steel and iron surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition) complete all as specified.

Reinforced cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified.

Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified.

Mild steel TMT round bars 5mm dia and over upto including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified.

Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (horizontal or sloping), rough finished flat surfaces of concrete complete all as specified.

Use and waste of formwork to edges of concrete flats, breaks in floors, openings in concrete walls, floors and roofs and sides of RCC/PCC bands in walls, horizontal or sloping, and similar work all exceeding 20cm wide complete all as specified.

Stainless steel plate rack of size 24"X36"X10" made of 1 mm thick salem stainless steel sheet grade SS-304 with shelves, hooks and railing to keep plates vertically and horizontally, including necessary fixing arrangement fixed in repair complete all as specified.

Sinks with drainage board made of stainless steel 1 mm thickgrade SS-304 kitchen or laboratory with plugs, washers and wastes & coupling; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm, bowl size 410mm x 330mm x 160mm fixed in repair complete all as specified.

Removing building materials (sand aggregates etc) (excluding earthwork) to a distance of 100 metres or under beyond the lead included in the rates, including loading , unloading and stacking at the destination (1.30 cum = 1 load) complete all as specified.

4mm thick figured glass, pin head type and glazing with oil putty in squares n. exc 0.5 sq. m in each pane fixed in repair complete all as specified.

Vitreous china wash down water closet pan (pedestal pattern), white or coloured including provision of plastic water closet, seat closet pattern with flat bottom, and seat cover and mild steel chromium plated or aluminium hinges device,CP jet with PVC valve less syphonic action flushing cistern of 10 ltrs capacity and flush pipe,brass chromium plated stop valve 15 mm dia , PVC Connection 300 mm long with brass union at both ends, making all necessary connection to make the system fully functional and making good the floor fixed in repair complete all as specified.

75mm bore sand cast cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors complete all as specified.

75 mm bore cast iron bends (any radius) for cast iron pipe, diminishing pieces or tapers (larger bore measured) fixed in repair complete all as specified.

Preparation of old painted wooden surfaces of any description and in any situation over 10 cm width or girth and applying one coat of synthetic enamel paint of tint as approved complete all as specified.

25 mm dia curtain rods, mild steel wall thickness 0.80 mm, powder coated with fixing metal ornamental holder and side finals (in pair for each door and window) as approved, fixing with PVC wall plugs and brass screws fixed in repair complete all as specified.

Prelaminated particle board 19mm thick, exterior grade prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screws to timber / steel frame work as in cupboard fixed in repairs, complete all as specified.

Piano hinges mild steel bright finish width of flap 40mm fixed in repairs complete all as specified.

PVC (SWR) bends 110 mm dia any radius including necessary arrangement fixed in repair complete all as specified.

Powder coated (minimum thickness of powder coating 50 micron) anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified.

Powder coated anodised aluminium window and ventilator shutters, fixed type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, etc complete all as specified.(Thickness or powder coating not less than 50 micron).

Powder coated anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stay 150mm long ( 1 no) hinge type B-21 100 mm long ( 2 nos) suitable handle ( 2 nos ) complete all as specified (glass ,beading,&builders hardware shall be measured & paid for seperately ). Minimum thickness of power coating 50 micron.

5.5mm thick sheet glass ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane in aluminium window frames with rubber packing in panels complete all as specified.

All as per serial item no 107 above but exc 0.5 sqm in each plane.

Taking down carefully existing copper / aluminum point wiring (light,fan, socket or power) complete including fittings such as switches, ceiling roses, pendents, regulators sockets, light fitting etc removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors etc. complete all as specified.

Point wiring using approved colour coding as per IS with unsheathed FRLS copper conductor single core 1.5 sqmm (nominal area) in PVC conduit (IS marked) including cutting chases and grouting concealed non metallic rigid PVC conduit pipe, tee, elbow and bend etc in any type of wall and making good to match with existing surface with all connecting accessories including recess metal wall Box (GI), PVC insulated and unsheated FRLS stranded copper, conductor single core of size 1.5 sqmm as earth continuity conductor to common earth and connecting to earth dolly proper colour coding shall be maintained complete all as specified for the following:-

One light / fan point controlled by one 5 Amps switch.

One 3 pin 5 Amp socket outlet controlled by one switch on same board.

One 3 pin 5 Amp socket outlet controlled by one switch on independent board.

One call bell point.

One light point controlled by 2 two way swiches.

Point wiring using approved colour coding as per IS with unsheathed FRLS copper conductor single core 4 sqmm (nominal area) in PVC conduit (IS marked) including cutting chases and grouting concealed non metallic rigid PVC conduit pipe, tee, elbow and bend etc in any type of wall and making good to match with existing surface with all connecting accessories including recess metal wall Box (GI), PVC insulated and unsheated FRLS stranded copper, conductor single core of size 4 sqmm as earth continuity conductor to common earth and connecting to earth dolly proper colour coding shall be maintained complete all as specified for one socket outlet 3 pin 15 Amps.

Switch piano flush type (IS marked), single pole, one way 6/5 Amp, 240 Volts fixed in repairs complete all as specified.

Switch piano flush type ( IS marked), single pole, 2 way 15 Amps, 240 Volts fixed in repairs complete all as specified.

Switch piano flush type ( IS marked), single pole, one way 16/15 Amps, 240 Volts fixed in repairs complete all as specified.

Socket outlet 2 / 3 pin, 6/5 Amp piano flush type fixed in repairs complete all as specified.

Socket outlet, 2 in 1, 3 pin 6 / 16 (5/15) Amp, piano flush type fixed in repairs complete all as specified.

Bell push 5/6 Amps single pole flush type fixed in repairs complete all as specified.

Call bell ding dong type AC 230 V fixed in repairs complete all as specified.

Ceiling rose, surface bakelite, 65mm x 50mm , two to three terminals fixed in repairs complete all as specified.

Sheet metal enclosure with double door for DBs conforming to IS:8623.III , IP:43 protection, shrouded neutral bar and cement spill protector, SPN 8 way, 240 Volt complete all as specified.

MCB single pole having braking capacity 10 KA, 6 to 32 Amps 240 volts C curve fixed in repairs complete all as specified.

MCB SPN having braking capacity 10 KA 35-60 Amp, 240 Volt , complete all as specified.

LED batten 20 W comprising of thermally conductive material, pre - wired with high efficiency electronic driver, high translucent frosted diffuser for glare free smooth light distribution including 20 W LED tube complete all as specified. Make : Crompton Cat No. LCCL B20-CDL or its equivalent in the makes mentioned in Appendix 'B'.

Surface and wall mounted LED batten 10 W extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver including LED tube complete all as specified. Make : Havells model ENDURALINEARNEOBS10WLED830SPCWH or its equivalent in the makes mentioned in Appendix 'B'.

LED 45 W fitting pressure die cast aluminium housing, heat resistant toughened glass, IP 66 protection, better optics for uniform distribution including bracket made of GI medium grade 40 mm dia pipe 1500 mm long fixed to wall with 2 Nos MS Clamps and fastener fixed in repair complete all as specified. Make : Crompton Cat No. LSTP-45-CDL or its equivalent in the makes mentioned in Appendi 'B'.

Earthing complete with galvanised steel earth electrode plate of size 600x600x6mm thick, buried directly in ground (earth pit not less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.50 m below normal ground level, connected to galvanised earth lead wire 4.0 mm dia by means of suitable GI nuts/bolts and braced properly up to main board including earth pit in cement concrete 1:2:4 type B-1, precast RCC cover in 1:2:4 reinforced with expanded metal, with suitable handle, excavation and earth work in any type of soil, medium grade GI watering pipe 20 mm bore with funnel wire mesh and medium grade GI wire protection pipe 15 mm bore up to main board complete as shown in electrical plate No 3 of MES schedule Part-I 2009, connected to earthing testing point including taking out existing unsv earthing and testing on completion complete all as specified. Note - The unit rate quoted shall include the cost of excavation & earth work in any type of soil, charcoal & salt in alternate layers, 20 mm GI pipe ( medium grade) for watering 15mm GI protection pipe (medium grade) funnel wire mesh PCC chamber in PCC 1:2:4 type B-1 cast iron frame and 40mm thick RCC cover for pit etc.

Sub main wiring with two single core PVC unsheathed FRLS copper cable 2X6 Sq mm+ 1x6 Sqmm, 650/1100 volts stranded conductor wire & drawing through and including rigid non metallic PVC conduit including continuous earth wire PVC insulated unsheathed cable 6 Sq mm copper multi stranded conductor and connecting to common earth and earth dolly including taking down the old unserviceable one complete all as specified. Note : Three runs of 6 sq mm cable and one run of conduit shall be measured as one unit.

Lamp Holder angular type insulated body with back plate for batten fitting fixed in repairs complete all as specified.

LED lamp 12 watt, CDL, B-22 cap, (Pin type), 230V, PF-0.95 (min) fixed in repairs complete all as specified.

Environmental friendly, ultra modern, energy saving, surface mounted, decorative oval bulk head edge-lit LED luminaire 10 W comprising of high brightness LEDs fixed in repairs complete all as specified. Make : Havells model RUGBYNEONFT10WLED760SSYMBOPC or its equivalent in the makes mentioned in Appendix 'B'.

Polycarbonate meter fixing case of size 168X253X115 mm with transparent cover, IP 65 protection class with mounting plate including fixing of existing serviceable KWH meter and connection including taking down the old unserviceable one complete all as specified.

Sagar Builders

Vinod Kumar Aggarwal

M/s Parmod Kumar

M/S H S ENTERPRISES

R. P. Suppliers and Construction Co.

Babu Ram Sud and Sons

Nirman Sahyog