REPAIR/MAINT OF ROADS IN MD/OTM ACCN IN AREA OF AGE B/R-I UNDER GE SAUGOR

Amount

M &L for Prepration of existing black top surface by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc .and applying tack coat on existing bituminious to ensure a bond between the surface being paved and the overlaying course with cationic bitumen emulsion RS-1 grade at the rate of 5 Kg per 10 Sqm of surface complete all as specified and as directed

M & L for laying premix bituminous macadam not exceeding 75 mm thickness (compacted thickness) using hot mix plant and mechanical paver with 4% binder (paving grade bitumen VG-30 grade) content by weight of total mix, rolled and compacted with power roller 8 to 12 tonnes to required camber and gradient complete all as specified and as directed. Note :- (i) Bituminous macadam shall be laid using self propelled hydrostatic paver finisher and preparation of mix shall be using hot mix plant and transporting the mix in tipper. (ii) The exact bitumen content required shall be determined as per IRC 27: 2009. The adjustment in rate due to variation in quantity of bitumen if any shall be priced at the rate of ₹50 per kg.

M & L for semi dense bituminous concrete 30 mm (compacted thickness) using graded crushed stone aggregate premixed with binder (paving grade bitumen VG-30 grade) @ 5% by weight of total mix & hydraulic lime filler, rolled and compacted with power roller 8 to 12 tonnes to required camber and gradient complete all as specified and as directed. Note :- (i) Semi dense bituminous concrete shall be laid using self propelled hydrostatic paver finisher and preparation of mix shall be using hot mix plant and transporting the mix in tipper. (ii) The exact bitumen content required shall be determined following the Marshall Mix Design procedure contained in the Asphalt Institute Manual MS-2 (Sixth Edition) as referred in case 3.5.3 of IRC 111: 2009. The adjustment in rate due to variation in quantity of bitumen if any shall be priced at the rate of ₹50 per kg.

Providing and applying 2.5 mm thick road marking strips (retro-reflective) of specified shade/ colour using hot thermoplastic material by fully/ semi-automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T & P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete all as specified and as directed.

S&F in repair Glow studs (cat's eye) solar reflective of size 80 to 100mm X 80 to 100mm x 15 to 20 mm made of metal body alloy with PAMA striplens reflectors with abrasion resistant coating as approved by engineer in charge. the studs shall be fixed to the road surface using the adhesive conforming to IS as per procedure recommended by the manufacturer complete all as specified and as directed.

S&F in repair delineator as per model no. DA-952 GP of M/s Dark eye, ABS round body fitted with 2 Nos 100 mm dia highly reflective reflectors made out of PMMA and mounted on MS pipe of 50 mm duly powder coated , antirust, & anti-theft steel net including embedding 200 mm below ground level in PCC M15 (Nominal mix) with using 20 mm graded stone aggregate in foundation of size 250mm x 250mm x 250mm necessary excavation and making good surface complete all as specified and as directed.

S&F in repair rubber speed bump of size 50 mm (height) X 380 mm (width) X 500 mm (length) ,ABS block black and yellow &reflectors on both sides including necessary fixing arrangement with epoxy /thermoplastic adhesive all as per manufacturers instructions complete all as specified and directed.

Surface dressing not exceeding 15 cm deep in soft/ loose soil complete all as specified and as directed.

M & L for 100 mm spread thicknessas in berm, moorum in granular sub base or light wearing surfaces, spread, rolled and compacted using vibratory roller of 80 to 100 kN static weight with plain or pad foot drum to required gradient and camber complete all as specified and as directed.

S & F in repairs Solar cat eye aluminium alloy shall (100 % water proofing design according to 65) of size 125 mm x125 mm x 25 mm power by solar cells and panels, ideal signal products for highways, parking lots, roads and similar isolated or stand-alone traffic applications and fixed with epoxy hardener adhesive complete all as specified and directed: - (a) Aluminium alloy shell (b) Solar panel mono-crystalline solar 2.4 ZV /0.3 watt (c) One Ni-MH or Ni-cd rechargeable batt (1.2 V/1600mA) (d) Six super bright LEDs (e) Colour - yellow, red, blue, green and white (f) Working time 50 to 60 hours successively after battery is fully charged (g) Solar energy -based power source (h) Charging time: five to six hours / day (i) Brightness sensitive auto switch automatically turns on at night & turn off at dawn (j) High visibility LEDs to help easy and safe night driving

M/S Sai supplier (BID ID -3157942)

Vee kay construction (BID ID -3158067)