PWD road to Chakuli_Road_Renewal coat SDBC,Bush cutting, raincut,signages0.000 to 0.790

Clearing grass and removal of rubbish up to a distance of 50m girth outside the periphery of the area etc complete asper direction of Engineer in charge.

Flank dressing to proper grade & camber on both side berms including T&P materials etc. complete as per direction of the Engineer in charge.

Earth work in hard soil within 50m initial lead and 1.50m initial lift including rough dressing and breaking clods to maximum 5cm. To 7cm and layingin layers not exceeding 0.3m in depth etc complete.

Filling foundation and plinth with sand well watered and rammed including cost, carriage and royalty of sand etc.complete as per specifications and direction of the Engineer-in-charge.

Providing plain cement concrete with CC (1:2:4) using 12mm size h.g. chips of approved quality and from approved quarry including hoisting lowering and laying concrete and compacting including wtering curing cost conveyance royalities and taxes of all materials cost of all labour with cost of allT&P required for the work etc complete.

Providing and laying of interlocking cement concrete paver block pavements (M40) having thickness 80mm as per drawing and technical specification clause 1504 etc complete asper direction of Engineer in charge.

Providing laying spreding & compacting graded stone aggregate to wet mix macacam specificationincluding pre mixing the material with water at OMC in mechanical mix plant carriage of mixed material by tipper to site, layng in uniform layers with paver in subbase/ base course on well prepared surface and compacting with vibrator roller to achieve th desired compaction as per clause 406 of MoSRT&H specifications for road and bridge works.

Cleaning existing granular surface including removal of foreign materials with wire brushes and small picks, seeeping with brooms or soft brushes and finally dustong with old gunny bags and / or compressed air to receive bituminous treatment etc complete asper direction of Engineer charge.

Clearing existing black topped surface including removal of foreign materials with wire brushes and small picks, seeeping with brooms or soft brushes and finally dustong with old gunny bags and / or compressed air to receive bituminous treatment etc complete asper direction of Engineer charge.

Providing applying primer coat with bitumen Emulsion [SS-1] on prepared surface of Granular base including cleaning of road surface & spraying primer @ 0.60kg/sqm using mechanical means as per technical specification clause 502 of MORD forlow porosity surface and as per the direction of the Engineer in charge.