Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹3.5 Cr
EMD Value
₹3.5 L
Closing Date
9 Jun 2023, 11:00 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Package No. RAY-001-AMA Renovation work of SDH Gunupur under AMA Hospital Programme, in the Rayagada District of Odisha
NBCC/ODISHA/ZO/NHM/NIT/23-24/047
NBCC/ODISHA/ZO/NHM/NIT/23-24/047
Open Tender-Domestic
Civil Works General
Rayagada, Odisha
₹11,800
₹3.5 L
9 Jun 2023
26 May 2023
9 Jun 2023
9 Jun 2023
22 Jun 2023
Head Description of Item Unit Qnty. Rate Amount
Earthwork in excavation in hard soil for site
leveling, foundation, pits, trenches and other
civil works upto and including 1.5metre lift
and stacking the soil upto a lead of 100 metre
and including dewatering, removing slush,
shoring and strutting (as required), complete
as per specification and as directed by the
Engineer-In-Charge.
Filling in foundation trenches and plinth, with
excavated earth including laying the earth in
layers not exceeding 23.5 cm thick ramming
& watering with all leads & lifts including cost
of all labour,T&P completed as directed by
the Engineer-in-charge.
Providing and laying plain cement concrete
1:3:6 (1 cement : 3 sand : 6 stone agregate
5 4 40mm nominal size) as levelling course in Cum 17.00 5789.32 98,429.86
floor and plinth including tempering, curring,
shuttering etc. complete all depth and height.
Providing and laying plain cement concrete
1:2:4 (1 cement : 2 sand : 4 stone agregate
6 5 12mm nominal size) as levelling course in Cum 56.67 7436.01 4,21,422.84
floor and plinth including tempering, curring,
shuttering etc. complete all depth and height.
Fly Ash. brick masonry of size 25 cm. x 12
cm. x 8 cm. having crushing strength not less
than 75 kg. Per Sqr. Cm. in cement mortar of
mix (1:6) with approved grade cement and
screened & washed sand for mortar after
immersing the bricks for 6 (Six) hours in
water before use in Superstructure including
7 6 splays cutting, circular moulding, corbelling, 0 0.00 0.00 0.00
chamfering and similar such type of works,
watering and curing etc. including cost,
conveyance, loading, unloading, royalties and
taxes of all materials, cost of all labour,
scaffolding, sundries, T&P required for the
works etc. complete in all respect as directed
by the Engineer-in-charge
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Providing, lifting, hoisting and laying
Reinforced cement concrete of M-25 grade
as per approved designs and drawings
having a minimum compressive strength (in
work test) 250 Kg. / Square cm. in 15 cm.
cubes at 28 days after mixing and test
conducted in accordance with I.S. 516 using
12 mm. to 20 mm. size black hard crushed
broken granite stone chips and screened and
washed sharp sand for mortar of approved
quality from approved quarry, washed and
cleaned ( 20mm. size chips not to exceeds 25
% ) to be mixed in concrete mixture with
Portland slag cement (PSC) including
hoisting, lowering, laying and compaction
10 9 concrete by using vibrators, watering and 0 0.00 0.00 0.00
curing for 28 days, centering and shuttering
then after dismantling and removing debris
from the work site and finishing the exposed
surface smooth providing grooves or beads
wherever necessary including cost,
conveyance, loading, unloading, royalties and
taxes of all materials and cost of all labours,
sundries, T & P required of the work etc.
complete in all respect as directed by the
Engineer-in-Charge. But excluding cost and
conveyance of M.S. rods or Tor steel and
binding wires and labour charges for
straightening, cutting, bending etc. of M.S.
rods or tor steel tying the grills and placing in
proper position.
Cutting, straightening coiled or bent up M.S.
Rod or tor steel of SAIL/ TATA / RINL
(VIZAG) make including bending, binding,
welding and joining if necessary and tying the
grills and placing in position as required for
R.C.C. Work and for providing fan hooks as
required, hoisting, lowering, laying including
cost, conveyances, taxes of M.S. Rod or tor
steel and binding wires of 18 to 20 gauge and
labour required for the work for bending,
binding and tying the grills in all floors (Linear
measurement will be taken and quantity will
be calculated basing on the standard weight
of B.I.S. for M.S. Rods or tor steel only.
Wastage if any, including weight of binding
wire will not be considered for measurement)
etc. complete as per specification & direction
of Engineer-in-charge.
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
12mm cement plaster to out side of brick
surfaces with cement mortar of mix 1:6 (1
26 25 cement : 6 fine sand) including necessary 0 0.00 0.00 0.00
scaffolding, curing etc. all complete at all
floors and all heights.
16mm cement plaster to inside of brick
surfaces with cement mortar of mix 1:6 (1
29 28 cement : 6 fine sand) including necessary 0 0.00 0.00 0.00
scaffolding, curing etc. all complete at all
floors and all heights.
Supplying, fitting & fixing of 8-10 mm thick &
size of 600x600 mm vertified floor tile of
matt finish with veilcraft (VC/FT ) shield(
Scratch free/stain free) with water absorption
limit between 0.08% to 3% and conforming
to IS : 15622:2006 (Group B Ib). laid on 20
mm thick cement mortar (1:4) (1 cement : 4
course sand) and filling joints with white
cement of approved quality including cost of
all materials, labour T&P etc. required for the
work all complete as per direction of the
Engineer-in-charge (for New Work only )
Supplying, fitting & fixing of 30cm x 20cm
Ceramic wall tiles of premium grade having
thickness 6.5mm to 6.7mm confirming to IS
13753 in dadoes, skirting and risers of steps
laid on 12 mm thick cement mortar (1:3) (1
34 33 cement : 3 course sand) jointed with slurry 0 0.00 0.00 0.00
mixed with pigment to match the shades of
the tiles etc. complete including cost of all
materials, labour T&P etc. required for the
work all complete as per direction of the
Engineer-in-charge
Supplying, fitting & fixing of 30cm x 30cm
Cheaqured tiles of premium grade having
thickness 10 mm to 12mm confirming to IS
13753 in dadoes, Tread and risers of steps
laid on 12 mm thick cement mortar (1:1) (1
37 36 cement : 1 course sand) jointed with slurry 0 0.00 0.00 0.00
mixed with pigment to match the shades of
the tiles etc. complete including cost of all
materials, labour T&P etc. required for the
work all complete as per direction of the
Engineer-in-charge
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying, fitting & fixing of Granite Tiles of
minimum Above 0.40 sqm. (20mm thick) of
approved make in floors laid on 20 mm thick
cement mortar (1:4) (1 cement : 4
39 38 course sand) and filling joints with slurry 0 0.00 0.00 0.00
including cost of all materials, labour T&P etc.
required for the work all complete incl.
rubbing as per direction of the Engineer-in-
Providing, fitting & fixing of false ceiling with
aluminium anodised T section with 2'-0"
centrer to center, L section of 15 micron on 4
walls to be pluged and the aluminium grid
2'0" X 2'0" hard board suspended from ceiling
Providing & fixing of Factory fabricated
WINPLUS® Aluminium door Systems - For
sliding door, made from 6063 alloy and T-6
tempered aluminium profile, in approved
shade of hybrid /purepolyster surface coating
(50-60micron Powder Coat), mechanically
mitred & jointed with casted / aluminium
extruded corner cleats along with Sliding
window Flush Lock, Bearing Rollers ,
Siliconised Weather strip and 5mm ET 125
toughened glassas infill shall be fitted into
Shutter using siliconised microwave treated
EPDM gaskets excluding taxes of all
materials and cost of all labours required for
the work etc. complete in all respect as
desired by the Engineer in charge.
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying and installing uPVC- Casement
openable doors made out of lead free green
profiles of KÖMMERLING make with a
GREENLINE mark with frame dimension of
58mm x 69mm x 50mm for doors and sash
dimension of sash dimension of 58mm x
93mm x 54mm for doors with corners fusion
welded, fully reinforced with Galvanized steel
of 1.2 mm to 2 mm. The sash will be fitted
with 6mm clear glass (toughened). The
physical properties of the profiles like Vicat
softening temperature, density, tensile
strength, hardness, weatherability, impact
48 47 strength and Modulus of Elasticity should be 0 0.00 0.00 0.00
tested in accordance with ASTM/DIN-ISO
standards and the thermal conductivity as per
IS standards. The profile manufacturer
should be a certified member of IGBC and
should have extrusion facility in India and the
windows to be assembled and installed by an
authorised fabrication partner . The windows
must be installed complete with all kinds of
ironmongery (including EPDM
gaskets,bridging wedges and glass packers)
and with suitable water draining system.
Application of Silicon sealant from Inside /
Outside of Dowcorning / GE or equivalent.
Supplying Fitting, fixing up fully glazed
aluminium framed window (sliding type)
made up aluminium section 9778 as window
frame, section 4095, 4096 and 9777, 3994 as
shutter frame with 5mm black glass as panel
fitted with rubber beading including locking
arrangement including all fitting including cost
of all materials, all taxes, labour, T&P
excluding cost of glass etc. complete as per
direction of the Engineer-in-charge
Supplying and Fixing of M.S. Grills,
M.S.Doors, M.S. Gate etc including
52 51 cost,conveyance of all materials,priming,and 0 0.00 0.00 0.00
labour for fitting fixing etc.complete as per the
instruction of Engineer-in-Charge
Priming one coat with wall cement primer
(water bound) to make an even finished
surface in all floors and heights to wall
surface of approved make and shade
including sand papering, applying putty
wherever necessary & cost of scaffolding,
staging charges with cost, conveyance, taxes
of all materials, cost of all labour,labour cess
T&P etc. complete as per the direction of the
Engineer-in-charge.
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Painting two coats with approved anti-fungal
weather seal paints (ISI) of approved colour,
shade on wall surface over a coat of wall
primer(ISI) water bound including sand
57 56 papering, polishing the surface, cost, 0 0.00 0.00 0.00
conveyances of all materials and cost of all
labour,labour cess with T&P etc, complete as
per specification & direction of Engineer-in-
Painting two coats with approved plastic
emulsion paint over a coat of wall primer of
make Dulux / Berger / Asian to inside surface
of walls finished with Acrylic Wall putty
(water based) of make (Birla / JK) and
finished smooth & even surface to receive
painting using roller to the final coat including
cost of scaffolding staging charges with cost,
conveyances, taxes of all materials, cost of
labour, T&P required for the work etc.
complete for all floors as per specification &
direction of the Engineer-in-charge.
Note :- Sample of Paint & Primer shall be
approved before procurement and use.
Finishing plastered surfaces of walls with
cement based wall putty (Water based) of
approved make and finishing the surface
smooth and even by sand papering to receive
painting in walls, at all heights with staging
wherever necessary with cost, conveyance,
taxes of all materials, cost of all
labour,labourcess, all T&P etc. required for
the work complete in all respect as per the
direction of the Engineer-in-charge.
Painting two coats with approved Enamel
Paint on Steel work in Ground Floor
Supplying, fitting and fixing of Stainless steel
of 304 grade in hand ralling using 50mm dia
of 2mm thick circular pipe with Balustrade of
size 32mm X 32mm X 2mm @ 0.90mtr. C/C
and stainless square pipe bracing of size
32mm X 32mm X 2mm in 3 rows in stair case
as per approved design and specification,
buffing, polishing etc with cost, conveyance,
taxes, all materials, labour, T&P etc. required
for the complete in all respect.
Supply & installation of two track sliding
window and fix glass, glass size 5mm glass
69 68 color reflective make (saint gobin) aluminium Sqm 45.78 7061.12 3,23,258.07
thickness 1.5mm made by alom aluminium
pipe & all hardware fittings.
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Factory made 30mm/32mm flush door shutter
(nonsal hard wood framefixed with 4mm
BWR ply on both side of frame) with all
labour, iron fittings, and wooden hinged
cleats etc fitted and fixed complete in all
Dismantling the existing RCC structure
consisting of RCC Columns,Slab etc for
creation of path way to newly to be
constructed SDC.
Carriage of excavated earth by mechanical
72 71 means within 5KM lead to be utilised for site Cum 200.00 205.20 41,040.40
Sand filling as per approved drawing and
technical specifications as per Section 2100
of MoRT&H Specifications for Road &
Bridge works (4th Revision).
Priming one coat with wall cement primer
(water bound) to make an even finished
surface in all floors and heights to wall
surface of approved make and shade
including sand papering, applying putty
wherever necessary & cost of scaffolding,
staging charges with cost, conveyance, taxes
of all materials, cost of all labour,labour cess
T&P etc. complete as per the direction of the
Engineer-in-charge.
Painting two coats with approved anti-fungal
weather seal paints (ISI) of approved colour,
shade on wall surface over a coat of wall
primer(ISI) water bound including sand
76 75 papering, polishing the surface, cost, 0 0.00 0.00 0.00
conveyances of all materials and cost of all
labour,labour cess with T&P etc, complete as
per specification & direction of Engineer-in-
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Painting two coats with approved plastic
emulsion paint over a coat of wall primer of
make Dulux / Berger / Asian to inside surface
of walls finished with Acrylic Wall putty
(water based) of make (Birla / JK) and
finished smooth & even surface to receive
painting using roller to the final coat including
cost of scaffolding staging charges with cost,
conveyances, taxes of all materials, cost of
labour, T&P required for the work etc.
complete for all floors as per specification &
direction of the Engineer-in-charge.
Note :- Sample of Paint & Primer shall be
approved before procurement and use.
Painting two coats with approved Enamel
Paint on Steel work in Ground Floor
Earthwork in excavation in hard soil for site
leveling, foundation, pits, trenches and other
civil works upto and including 1.5metre lift
and stacking the soil upto a lead of 100 metre
and including dewatering, removing slush,
shoring and strutting (as required), complete
as per specification and as directed by the
Engineer-In-Charge.
Filling in foundation trenches and plinth, with
well gravelled sand including laying the earth
in layers not exceeding 23.5 cm thick
ramming & watering with all leads & lifts
including cost of all labour,T&P completed as
directed by the Engineer-in-charge.
Providing and laying plain cement concrete
1:3:6 (1 cement : 3 sand : 6 stone agregate
86 85 40mm nominal size) as levelling course in Cum 5.05 5789.32 29,233.67
floor and plinth including tempering, curring,
shuttering etc. complete all depth and height.
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Fly Ash. brick masonry of size 25 cm. x 12
cm. x 8 cm. having crushing strength not less
than 75 kg. Per Sqr. Cm. in cement mortar of
mix (1:6) with approved grade cement and
screened & washed sand for mortar after
immersing the bricks for 6 (Six) hours in
water before use in Superstructure including
87 86 splays cutting, circular moulding, corbelling, 0 0.00 0.00 0.00
chamfering and similar such type of works,
watering and curing etc. including cost,
conveyance, loading, unloading, royalties and
taxes of all materials, cost of all labour,
scaffolding, sundries, T&P required for the
works etc. complete in all respect as directed
by the Engineer-in-charge
Providing, lifting, hoisting and laying
Reinforced cement concrete of M-25 grade
as per approved designs and drawings
having a minimum compressive strength (in
work test) 250 Kg. / Square cm. in 15 cm.
cubes at 28 days after mixing and test
conducted in accordance with I.S. 516 using
12 mm. to 20 mm. size black hard crushed
broken granite stone chips and screened and
washed sharp sand for mortar of approved
quality from approved quarry, washed and
cleaned ( 20mm. size chips not to exceeds 25
% ) to be mixed in concrete mixture with
Portland slag cement (PSC) including
hoisting, lowering, laying and compaction
89 88 concrete by using vibrators, watering and 0 0.00 0.00 0.00
curing for 28 days, centering and shuttering
then after dismantling and removing debris
from the work site and finishing the exposed
surface smooth providing grooves or beads
wherever necessary including cost,
conveyance, loading, unloading, royalties and
taxes of all materials and cost of all labours,
sundries, T & P required of the work etc.
complete in all respect as directed by the
Engineer-in-Charge. But excluding cost and
conveyance of M.S. rods or Tor steel and
binding wires and labour charges for
straightening, cutting, bending etc. of M.S.
rods or tor steel tying the grills and placing in
proper position.
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Cutting, straightening coiled or bent up M.S.
Rod or tor steel of make including bending,
binding, welding and joining if necessary and
tying the grills and placing in position as
required for R.C.C. Work and for providing
fan hooks as required, hoisting, lowering,
laying including cost, conveyances, taxes of
M.S. Rod or tor steel and binding wires of 18
to 20 gauge and labour required for the work
for bending, binding and tying the grills in all
floors (Linear measurement will be taken and
quantity will be calculated basing on the
standard weight of B.I.S. for M.S. Rods or tor
steel only. Wastage if any, including weight of
binding wire will not be considered for
measurement) etc. complete as per
specification & direction of Engineer-in-
12mm cement plaster to out side of brick
surfaces with cement mortar of mix 1:6 (1
100 99 cement : 6 fine sand) including necessary 0 0.00 0.00 0.00
scaffolding, curing etc. all complete at all
floors and all heights.
16mm cement plaster to inside of brick
surfaces with cement mortar of mix 1:6 (1
102 101 cement : 6 fine sand) including necessary 0 0.00 0.00 0.00
scaffolding, curing etc. all complete at all
floors and all heights.
Supplying, fitting & fixing of 30cm x 20cm
Ceramic wall tiles of premium grade having
thickness 6.5mm to 6.7mm confirming to IS
13753 in dadoes, skirting and risers of steps
laid on 12 mm thick cement mortar (1:3) (1
104 103 cement : 3 course sand) jointed with slurry 0 0.00 0.00 0.00
mixed with pigment to match the shades of
the tiles etc. complete including cost of all
materials, labour T&P etc. required for the
work all complete as per direction of the
Engineer-in-charge
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying and Fixing of M.S. Grills,
M.S.Doors, M.S. Gate etc including
106 105 cost,conveyance of all materials,priming,and 0 0.00 0.00 0.00
labour for fitting fixing etc.complete as per the
instruction of Engineer-in-Charge
Painting two coats with approved anti-fungal
weather seal paints (ISI) of approved colour,
shade on wall surface over a coat of wall
primer(ISI) water bound including sand
108 107 papering, polishing the surface, cost, 0 0.00 0.00 0.00
conveyances of all materials and cost of all
labour,labour cess with T&P etc, complete as
per specification & direction of Engineer-in-
Painting two coats with approved plastic
emulsion paint over a coat of wall primer of
make Dulux / Berger / Asian to inside surface
of walls finished with Acrylic Wall putty
(water based) of make (Birla / JK) and
finished smooth & even surface to receive
painting using roller to the final coat including
cost of scaffolding staging charges with cost,
conveyances, taxes of all materials, cost of
labour, T&P required for the work etc.
complete for all floors as per specification &
direction of the Engineer-in-charge.
Note :- Sample of Paint & Primer shall be
approved before procurement and use.
Earthwork in excavation in hard soil for site
leveling, foundation, pits, trenches and other
civil works upto and including 1.5metre lift
and stacking the soil upto a lead of 100 metre
and including dewatering, removing slush,
shoring and strutting (as required), complete
as per specification and as directed by the
Engineer-In-Charge.
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Filling in foundation trenches and plinth, with
well gravelled sand including laying the earth
in layers not exceeding 23.5 cm thick
ramming & watering with all leads & lifts
including cost of all labour,T&P completed as
directed by the Engineer-in-charge.
Providing and laying plain cement concrete
1:3:6 (1 cement : 3 sand : 6 stone agregate
116 115 40mm nominal size) as levelling course in Cum 15.00 5789.32 86,839.74
floor and plinth including tempering, curring,
shuttering etc. complete all depth and height.
Providing and laying plain cement concrete
1:2:4 (1 cement : 2 sand : 4 stone agregate
117 116 12mm nominal size) as levelling course in Cum 15.00 7436.01 1,11,540.09
floor and plinth including tempering, curring,
shuttering etc. complete all depth and height.
12mm cement plaster to out side of brick
surfaces with cement mortar of mix 1:6 (1
118 117 cement : 6 fine sand) including necessary 0 0.00 0.00 0.00
scaffolding, curing etc. all complete at all
floors and all heights.
Supplying, fitting & fixing of 30cm x 20cm
Ceramic wall tiles of premium grade having
thickness 6.5mm to 6.7mm confirming to IS
13753 in dadoes, skirting and risers of steps
laid on 12 mm thick cement mortar (1:3) (1
120 119 cement : 3 course sand) jointed with slurry 0 0.00 0.00 0.00
mixed with pigment to match the shades of
the tiles etc. complete including cost of all
materials, labour T&P etc. required for the
work all complete as per direction of the
Engineer-in-charge
Supplying fitting and fixing of granite tile of
122 121 approved quality including all etc required to Sqm 30.00 3256.92 97,707.54
complete the work.
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying, fitting and fixing of Stainless steel
of 304 grade in hand ralling using 50mm dia
of 2mm thick circular pipe with Balustrade of
size 32mm X 32mm X 2mm @ 0.90mtr. C/C
and stainless square pipe bracing of size
32mm X 32mm X 2mm in 3 rows in stair case
as per approved design and specification,
buffing, polishing etc with cost, conveyance,
taxes, all materials, labour, T&P etc. required
for the complete in all respect.
Earth work in excavation of foundation inall
kinds of soil with all lead and lift including
124 123 dressing and leveling the bed and depositing Cum 59.98 244.02 14,636.56
the excavated materials with all cost,
conveyance etc. complete.
Supplying and filling foundation and plinth
with sand, well watered and rammed
including all cost, conveyance, royalty, taxes
CC (1:3:6) in foundaton and floor using hard
Fly Ash Brick in Cement Motor (1:6) in
Foundation & Plinth etc complete.
R C C M-25 grade with 20mm and down
128 127 graded size CBHG chips including hoisting 0 0.00 0.00 0.00
and laying, watering etc complete
Fly Ash Brick in Cement Motor (1:6) in
Superstructure etc complete.
12mm thick cement plaster in cement mortar
(1:6) etc complete.
16mm thick cement plaster in cement mortar
(1:6) etc complete.
Painting two coats to new Iron work with
138 137 approved enamel paints of approved Sqm 16.37 182.19 2,982.48
coloured etc complete
Painting two coats with approved weather
139 138 seal paints of approved colour, shade on wall Sqm 148.27 100.30 14,871.48
surface etc comeplete
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Priming one coat with approved Water Bound
140 139 Wall cement Primer on Plastered Surface in Sqm 513.27 80.12 41,124.22
Strengthening, cutting,bending binding of
steel etc complete
Supplying fitting and fixing of grill in boundary
142 141 of square bar of approved quality including all Qntl 136.62 111.86 15,282.54
etc required to complete the work.
Earthwork in excavation in hard soil for site
leveling, foundation, pits, trenches and other
civil works upto and including 1.5metre lift
and stacking the soil upto a lead of 100 metre
and including dewatering, removing slush,
shoring and strutting (as required), complete
as per specification and as directed by the
Engineer-In-Charge.
Filling in foundation trenches and plinth, with
well gravelled sand including laying the earth
in layers not exceeding 23.5 cm thick
ramming & watering with all leads & lifts
including cost of all labour,T&P completed as
directed by the Engineer-in-charge.
Providing and laying plain cement concrete
1:4:8 (1 cement : 4 sand : 8 stone agregate
147 146 40mm nominal size) as levelling course in Cum 20.00 5388.12 1,07,762.32
floor and plinth including tempering, curring,
shuttering etc. complete all depth and height.
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Providing, lifting, hoisting and laying
Reinforced cement concrete of M-25 grade
as per approved designs and drawings
having a minimum compressive strength (in
work test) 250 Kg. / Square cm. in 15 cm.
cubes at 28 days after mixing and test
conducted in accordance with I.S. 516 using
12 mm. to 20 mm. size black hard crushed
broken granite stone chips and screened and
washed sharp sand for mortar of approved
quality from approved quarry, washed and
cleaned ( 20mm. size chips not to exceeds 25
% ) to be mixed in concrete mixture with
Portland slag cement (PSC) including
hoisting, lowering, laying and compaction
148 147 concrete by using vibrators, watering and Cum 20.13 6340.38 1,27,651.95
curing for 28 days, centering and shuttering
then after dismantling and removing debris
from the work site and finishing the exposed
surface smooth providing grooves or beads
wherever necessary including cost,
conveyance, loading, unloading, royalties and
taxes of all materials and cost of all labours,
sundries, T & P required of the work etc.
complete in all respect as directed by the
Engineer-in-Charge. But excluding cost and
conveyance of M.S. rods or Tor steel and
binding wires and labour charges for
straightening, cutting, bending etc. of M.S.
rods or tor steel tying the grills and placing in
proper position.
Fly Ash. brick masonry of size 25 cm. x 12
cm. x 8 cm. having crushing strength not less
than 75 kg. Per Sqr. Cm. in cement mortar of
mix (1:6) with approved grade cement and
screened & washed sand for mortar after
immersing the bricks for 6 (Six) hours in
water before use in Superstructure including
149 148 splays cutting, circular moulding, corbelling, 0 0.00 0.00 0.00
chamfering and similar such type of works,
watering and curing etc. including cost,
conveyance, loading, unloading, royalties and
taxes of all materials, cost of all labour,
scaffolding, sundries, T&P required for the
works etc. complete in all respect as directed
by the Engineer-in-charge
16mm cement plaster to inside of brick
surfaces with cement mortar of mix 1:6 (1
151 150 cement : 6 fine sand) including necessary Sqm 800.00 247.68 1,98,145.60
scaffolding, curing etc. all complete at all
floors and all heights.
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Painting two coats with approved anti-fungal
weather seal paints (ISI) of approved colour,
shade on wall surface over a coat of wall
primer(ISI) water bound including sand
152 151 papering, polishing the surface, cost, Sqm 800.00 100.30 80,240.00
conveyances of all materials and cost of all
labour,labour cess with T&P etc, complete as
per specification & direction of Engineer-in-
Providing and laying factory made chamfered
edge Cement Concrete paver blocks in
footpath, parks, lawns, drive ways or light
traffic parking etc, of required strength,
thickness & size/ shape, made by table
vibratory method using PU mould, laid in
required colour & pattern over 50mm thick
compacted bed of sand, compacting and
proper embedding/laying of inter locking
paver blocks into the sand bedding layer
through vibratory compaction by using plate
vibrator, filling the joints with sand and cutting
of paver blocks as per required size and
pattern, finishing and sweeping extra sand.
complete all as per direction of Engineer-in-
60mm thick cement concrete paver block of
with approved colour, design & pattern.
Surface dressing of the ground including
removing Vegetation and making up
undulations and in-equalities not exceeding
15 cms in depth/ height including disposal of
rubbish lead upto 50m (at least 5m away from
the dressed area).
Supplying and stacking of good earth at site
including royalty and carriage upto 5 km lead
complete (earth measured in stacks will be
reduced by 20% for payment), 200mm thick.
Supplying and stacking sludge at site
including royalty and carriage upto 5 km lead
complete (sludge measured in stacks will be
reduced by 8% for payment).
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Uprooting weeds from the trenched area after
10 to 15 days of its flooding with water
including disposal of uprooted vegetation,
breaking clods and fine dressing the ground
including all materials and labour complete
as per direction of Engineer-In-Charge.
Providing and laying Neelgiri/Mexican grass
turf with earth 50mm to 60mm thickness of
existing ground prepared with proper level
and ramming with tools wooden (Dhurmos)
158 157 and than rolling the surface with light roller Sqm 675.00 252.99 1,70,769.60
make the surface smoothen and light
waterning with sprinkler and maintenance
for 30 days or more till the grass establish
properly, as per direction of officer-in-charge.
Providing & laying Selection no. 1 grass turf
with earth 50mm to 60mm thickness of
existing ground prepared with proper level
and ramming with required tools wooden and
159 158 than rolling the surface with light roller make Sqm 225.00 103.25 23,231.25
the surface smoothen and light watering the
same maintenance for 30 days or more till the
grass establish properly,as per direction of
officer in charge
Provision of plantation all around the campus
with suitable Plants and Shurbs where
required including all material and labour
162 161 Aglaonema crispum(6'' DIA) Nos 30.00 59.00 1,770.00
163 162 Alpinia sanderae(10'' dia) Nos 30.00 106.20 3,186.00
164 163 Anthurium andreanum(10'' dia) Nos 30.00 106.20 3,186.00
165 164 Asparagus densiflorus(6'' dia) Nos 30.00 47.20 1,416.00
166 165 Caladium bicolor(6'' dia) Nos 30.00 59.00 1,770.00
167 166 Calathea bella Nos 30.00 59.00 1,770.00
168 167 Chlorophytum comosum(6'' dia) Nos 30.00 47.20 1,416.00
169 168 Costus melartifolius(10'' dia) Nos 30.00 106.20 3,186.00
170 169 Curculigo capitulata (6'' dia) Nos 30.00 59.00 1,770.00
171 170 Dracaena deremensis(10'' dia) Nos 30.00 106.20 3,186.00
172 171 Furcaria foetida(10'' dia) Nos 30.00 106.20 3,186.00
173 172 Heliconia rostrata(10'' DIA) Nos 30.00 106.20 3,186.00
174 173 Hemigraphis colorata(6'' DIA) Nos 30.00 59.00 1,770.00
175 174 Kaempferia roscoeana Nos 30.00 59.00 1,770.00
177 176 Livistonia rotundifolia(10'' DIA) Nos 30.00 118.00 3,540.00
178 177 Ophiopogon jaburan(6'' DIA) Nos 30.00 59.00 1,770.00
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
179 178 Pandanus sanderi(6'') Nos 30.00 59.00 1,770.00
Plantation of Trees, Shrubs, and Hedge at
site i/c watering and removal of
180 179 unsaverieable material’s as per direction of Nos 570.00 7.55 4,304.64
officer in charge (excluding cost of plant &
Providing and laying at or near ground level
factory made kerb stone of M-25 grade
cement concrete in position to the required
line, level and curvature, jointed with cement
mortar 1:3 (1 cement: 3 coarse sand),
including making joints with or without
grooves (thickness of joints except at sharp
curve shall not to more than 5mm), including
making drainage opening wherever required
complete etc. as per direction of Engineer-in-
charge (length of finished kerb edging shall
be measured for payment). (Precast C.C.
kerb stone shall be approved by Engineer-in-
Supply & installation of inter lock kerb stone
182 181 of solid gray 300 X 300 X 150 mm inluding Cum 15.00 10163.99 1,52,459.84
cost of all labour & materials etc.
Earthwork in excavation in hard soil for site
leveling, foundation, pits, trenches and other
civil works upto and including 1.5metre lift
and stacking the soil upto a lead of 100 metre
and including dewatering, removing slush,
shoring and strutting (as required), complete
as per specification and as directed by the
Engineer-In-Charge.
Filling in foundation trenches and plinth, with
excavated earth including laying the earth in
layers not exceeding 23.5 cm thick ramming
& watering with all leads & lifts including cost
of all labour,T&P completed as directed by
the Engineer-in-charge.
Providing and laying plain cement concrete
1:4:8 (1 cement : 4 sand : 8 stone agregate
187 186 40mm nominal size) as levelling course in Cum 67.99 4854.05 3,30,035.27
floor and plinth including tempering, curring,
shuttering etc. complete all depth and height.
Providing and laying plain cement concrete
1:2:4 (1 cement : 2 sand : 4 stone agregate
188 187 12mm nominal size) as levelling course in Cum 10.00 6914.09 69,140.92
floor and plinth including tempering, curring,
shuttering etc. complete all depth and height.
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Fly Ash. brick masonry of size 25 cm. x 12
cm. x 8 cm. having crushing strength not less
than 75 kg. Per Sqr. Cm. in cement mortar of
mix (1:6) with approved grade cement and
screened & washed sand for mortar after
immersing the bricks for 6 (Six) hours in
water before use in Superstructure including
189 188 splays cutting, circular moulding, corbelling, 0 0.00 0.00 0.00
chamfering and similar such type of works,
watering and curing etc. including cost,
conveyance, loading, unloading, royalties and
taxes of all materials, cost of all labour,
scaffolding, sundries, T&P required for the
works etc. complete in all respect as directed
by the Engineer-in-charge
Providing, lifting, hoisting and laying
Reinforced cement concrete of M-20 grade
as per approved designs and drawings
having a minimum compressive strength (in
work test) 250 Kg. / Square cm. in 15 cm.
cubes at 28 days after mixing and test
conducted in accordance with I.S. 516 using
12 mm. to 20 mm. size black hard crushed
broken granite stone chips and screened and
washed sharp sand for mortar of approved
quality from approved quarry, washed and
cleaned ( 20mm. size chips not to exceeds 25
% ) to be mixed in concrete mixture with
Portland slag cement (PSC) including
hoisting, lowering, laying and compaction
191 190 concrete by using vibrators, watering and 0 0.00 0.00 0.00
curing for 28 days, centering and shuttering
then after dismantling and removing debris
from the work site and finishing the exposed
surface smooth providing grooves or beads
wherever necessary including cost,
conveyance, loading, unloading, royalties and
taxes of all materials and cost of all labours,
sundries, T & P required of the work etc.
complete in all respect as directed by the
Engineer-in-Charge. But excluding cost and
conveyance of M.S. rods or Tor steel and
binding wires and labour charges for
straightening, cutting, bending etc. of M.S.
rods or tor steel tying the grills and placing in
proper position.
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Cutting, straightening coiled or bent up M.S.
Rod or tor steel of SAIL/ TATA / RINL
(VIZAG) make including bending, binding,
welding and joining if necessary and tying the
grills and placing in position as required for
R.C.C. Work and for providing fan hooks as
required, hoisting, lowering, laying including
cost, conveyances, taxes of M.S. Rod or tor
steel and binding wires of 18 to 20 gauge and
labour required for the work for bending,
binding and tying the grills in all floors (Linear
measurement will be taken and quantity will
be calculated basing on the standard weight
of B.I.S. for M.S. Rods or tor steel only.
Wastage if any, including weight of binding
wire will not be considered for measurement)
etc. complete as per specification & direction
of Engineer-in-charge.
12mm cement plaster to out side of brick
surfaces with cement mortar of mix 1:6 (1
201 200 cement : 6 fine sand) including necessary 0 0.00 0.00 0.00
scaffolding, curing etc. all complete at all
floors and all heights.
16mm cement plaster to inside of brick
surfaces with cement mortar of mix 1:6 (1
203 202 cement : 6 fine sand) including necessary 0 0.00 0.00 0.00
scaffolding, curing etc. all complete at all
floors and all heights.
6 mm cement plaster on RCC surfaces at
ceiling/slab soffit and other locations with
cement mortar of mix 1:4 (1 cement : 4
coarse sand) including necessary scaffolding,
curing etc. all complete at all floors and all
2.5 cm thick grading concrete (1:2:2) on roof
slab with 6.7mm & down grades size hard
granite crusher broken chips on new work in
Priming one coat with wall cement primer
(water bound) to make an even finished
surface in all floors and heights to wall
surface of approved make and shade
including sand papering, applying putty
wherever necessary & cost of scaffolding,
staging charges with cost, conveyance, taxes
of all materials, cost of all labour,labour cess
T&P etc. complete as per the direction of the
Engineer-in-charge.
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Painting two coats with approved anti-fungal
weather seal paints (ISI) of approved colour,
shade on wall surface over a coat of wall
primer(ISI) water bound including sand
211 210 papering, polishing the surface, cost, 0 0.00 0.00 0.00
conveyances of all materials and cost of all
labour,labour cess with T&P etc, complete as
per specification & direction of Engineer-in-
Painting two coats with approved plastic
emulsion paint over a coat of wall primer of
make Dulux / Berger / Asian to inside surface
of walls finished with Acrylic Wall putty
(water based) of make (Birla / JK) and
finished smooth & even surface to receive
painting using roller to the final coat including
cost of scaffolding staging charges with cost,
conveyances, taxes of all materials, cost of
labour, T&P required for the work etc.
complete for all floors as per specification &
direction of the Engineer-in-charge.
Note :- Sample of Paint & Primer shall be
approved before procurement and use.
Finishing plastered surfaces of walls with
cement based wall putty (Water based) of
approved make and finishing the surface
smooth and even by sand papering to receive
painting in walls, at all heights with staging
wherever necessary with cost, conveyance,
taxes of all materials, cost of all
labour,labourcess, all T&P etc. required for
the work complete in all respect as per the
direction of the Engineer-in-charge.
Earth work in excavation of foundation inall
kinds of soil with all lead and lift including
217 216 dressing and leveling the bed and depositing Cum 76.47 244.02 18,660.52
the excavated materials with all cost,
conveyance etc. complete.
Supplying and filling foundation and plinth
with sand, well watered and rammed
including all cost, conveyance, royalty, taxes
CC (1:3:6) in foundaton and floor using hard
P C C (1:2:4) grade with 20mm and down
220 219 graded size CBHG chips including hoisting Cum 164.56 7436.01 12,23,653.63
and laying, watering etc complete
12mm thick cement plaster in cement mortar
(1:6) etc complete.
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Providing, lifting, hoisting and laying
Reinforced cement concrete of M-20 grade
as per approved designs and drawings
having a minimum compressive strength (in
work test) 250 Kg. / Square cm. in 15 cm.
cubes at 28 days after mixing and test
conducted in accordance with I.S. 516 using
12 mm. to 20 mm. size black hard crushed
broken granite stone chips and screened and
washed sharp sand for mortar of approved
quality from approved quarry, washed and
cleaned ( 20mm. size chips not to exceeds 25
% ) to be mixed in concrete mixture with
Portland slag cement (PSC) including
hoisting, lowering, laying and compaction
222 221 concrete by using vibrators, watering and 0 0.00 0.00 0.00
curing for 28 days, centering and shuttering
then after dismantling and removing debris
from the work site and finishing the exposed
surface smooth providing grooves or beads
wherever necessary including cost,
conveyance, loading, unloading, royalties and
taxes of all materials and cost of all labours,
sundries, T & P required of the work etc.
complete in all respect as directed by the
Engineer-in-Charge. But excluding cost and
conveyance of M.S. rods or Tor steel and
binding wires and labour charges for
straightening, cutting, bending etc. of M.S.
rods or tor steel tying the grills and placing in
proper position.
16mm cement plaster to inside of brick
surfaces with cement mortar of mix 1:6 (1
225 224 cement : 6 fine sand) including necessary 0 0.00 0.00 0.00
scaffolding, curing etc. all complete at all
floors and all heights.
2.5 cm thick grading concrete (1:2:2) on roof
slab with 6.7mm & down grades size hard
granite crusher broken chips on new work in
Earth work in excavation by mechanical
means (Hydraulic excavator) / manual means
in foundation trenches or drains (not
exceeding 1.5 m in width or 10 sqm on plan),
230 229 including dressing of sides and ramming of 0 0.00 0.00 0.00
bottoms, lift upto 1.5 m, including getting out
the excavated soil and disposal of surplus
excavated soil as directed, within a lead of 50
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Filling at all depth with available excavated
earth (excluding rock) in trenches, plinth,
sides of foundations etc. in layers not
233 232 exceeding 15cm in depth: consolidating each CUM 30.74 135.58 4,167.42
deposited layer by ramming and watering
complete (lead upto 100m) as directed by the
Engineer-In-charge.
Supplying and filling sand in foundation and
over areas including watering, ramming,
consolidating and dressing, labours, tools,
taxes etc. all complete as per the
specification and direction of Engineer-In-
Providing and laying plain cement concrete
1:4:8 (1 cement : 4 sand : 8 stone agregate
235 234 40mm nominal size) as levelling course in CUM 3.87 5388.12 20,856.05
floor and plinth including tempering, curring,
shuttering etc. complete all depth and height.
Providing and laying in position ready mixed
M-25 grade concrete for reinforced cement
concrete work, using cement content as per
approved design mix, manufactured in fully
automatic batching plant and transported to
site of work in transit mixer for all leads,
having continuous agitated mixer,
manufactured as per mix design of specified
grade for reinforced cement concrete work,
including pumping of R.M.C. from transit
mixer to site of laying , excluding the cost of
centering, shuttering finishing and
reinforcement, including cost of admixtures in
recommended proportions as per IS : 9103 to
accelerate/ retard setting of concrete,
improve workability without impairing strength
and durability as per direction of the Engineer
(Note :- Cement content considered in this
item is @ 330 kg/cum. Excess/less cement
used as per design mix is
payable/recoverable separately).
237 236 All works upto plinth level 0 0.00 0.00 0.00
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Cutting, straightening coiled or bent up M.S.
Rod or tor steel of SAIL/ TATA / RINL
(VIZAG) make including bending, binding,
welding and joining if necessary and tying the
grills and placing in position as required for
R.C.C. Work and for providing fan hooks as
required, hoisting, lowering, laying including
cost, conveyances, taxes of M.S. Rod or tor
steel and binding wires of 18 to 20 gauge and
labour required for the work for bending,
binding and tying the grills in all floors (Linear
measurement will be taken and quantity will
be calculated basing on the standard weight
of B.I.S. for M.S. Rods or tor steel only.
Wastage if any, including weight of binding
wire will not be considered for measurement)
etc. complete as per specification & direction
of Engineer-in-charge.
12mm cement plaster to out side of brick
surfaces with cement mortar of mix 1:6 (1
242 241 cement : 6 fine sand) including necessary 0 0.00 0.00 0.00
scaffolding, curing etc. all complete at all
floors and all heights.
244 243 Neat cement punning. SQM 84.06 27.38 2,301.23
Supplying and fixing 900mm dia SFRC cover
without frame for manhole including cost of
all materials, T&P, labour etc complete as per
direction of Engineer-in-charge.
2.5 cm thick A.S Flooring in C.C (1:2:2)
including punning using 12 mm size C.B hard
granite chips with cost of all labour & other
materials etc complete.
Earth work in excavation by mechanical
means (Hydraulic excavator) / manual means
in foundation trenches or drains (not
exceeding 1.5 m in width or 10 sqm on plan),
247 246 including dressing of sides and ramming of 0 0.00 0.00 0.00
bottoms, lift upto 1.5 m, including getting out
the excavated soil and disposal of surplus
excavated soil as directed, within a lead of 50
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
248 247 Excavation in earth work cum 12.94 244.02 3,158.56
Supplying and filling in plinth with sand under
249 248 floors, including watering, ramming, 0 0.00 0.00 0.00
consolidating and dressing complete.
250 249 peripherial wall foundation cum 1.60 527.70 845.86
Providing and laying in position cement
concrete of specified grade excluding the
cost of centering and shuttering - All work up
to plinth level :
1:3:6 (1 Cement : 3 coarse sand : 6 graded
stone aggregate 40 mm nominal size)
253 252 peripherial wall foundation cum 1.60 5789.32 9,279.87
Brick work with common burnt clay F.P.S.
254 253 (non modular) bricks of class designation 7.5 0 0.00 0.00 0.00
in foundation and plinth in
Cement mortar 1:6 (1 cement : 6 coarse
Providing and laying in position M-25 grade
concrete for reinforced cement concrete
work, using cement content as per approved
design mix, manufactured in fully automatic
batching plant and transported to site of work
in transit mixer for all leads, having
continuous agitated mixer, manufactured as
per mix design of specified grade for
reinforced cement concrete work, including
pumping of R.M.C. from transit mixer to site
257 256 of laying , excluding the cost of centering, 0 0.00 0.00 0.00
shuttering finishing and reinforcement,
including cost of admixtures in recommended
proportions as per IS : 9103 to accelerate/
retard setting of concrete, improve workability
without impairing strength and durability as
per direction of the Engineer - in - charge.
(Note :- Cement content considered in this
item is @ 330 kg/cum. Excess/less cement
used as per design mix is
payable/recoverable separately).
Steel reinforcement for R.C.C. work including
straightening, cutting, bending, placing in
position and binding all complete upto plinth
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
262 261 Thermo-Mechanically Treated bars 0 0.00 0.00 0.00
well sink with top and bottom cover of min 50
mm thk with cementing Khoa filling etc
2.5 cm thick grading concrete (1:2:2) on roof
slab with 6.7mm & down grades size hard
granite crusher broken chips on new work in
Providing, Fitting & Fixing of 110mm dia PVC
Rain water pipe with cost, conveyance,
royalties of all materials with cost of all
labour,labour cess, and T&P required for the
work etc. complete in all respect as directed
by the Engineer in charge.
267 266 Sub-Total of Civil Works 0 0.00 0.00 2,05,23,010.42
268 0 Plumbing Works 0 0.00 0.00 0.00
Providing and fixing Chlorinated Polyvinyl
Chloride (CPVC) pipes conforming to
IS:15778, having thermal stability for hot &
cold water supply, including all CPVC plain &
brass threaded fittings including fixing the
pipe with clamps at 1.00 m spacing. This
includes jointing of pipes & fittings with one
step CPVC solvent cement and testing of
joints complete as per direction of Engineer-
Supplying all materials, labour, T&P and
providing and fixing to wall or ceiling and floor
GI/PVC pipes, class-IV (10 k.g. F/cm) on
firming I.S.4985 of the following nominal
bore, tube fittings and clamps including
making good the wall, ceiling and floor,
testing all complete as per specification and
direction of the Engineer in charge.
275 7 20mm dia PVC ASTM pipe (sch-80) Mtrs. 20.00 161.66 3,233.20
276 8 25mm dia PVC ASTM pipe (sch-80) Mtrs. 20.00 221.96 4,439.16
277 9 32mm dia PVC ASTM pipe (sch-80) Mtrs. 20.00 291.70 5,833.92
278 10 40mm dia PVC ASTM pipe (sch-80) Mtrs. 20.00 383.50 7,670.00
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying all materials, labour T&P and fitting
and fixing brass/CP fittings of the following
nominal bore with supply of all joiniting
279 11 materials including cost & conveyance of all 0 0.00 0.00 0.00
materials to worksite, payment of taxes etc.
all complete as per P.H specification and
direction of the Engineer-in-charge.
15mm dia CP angle stop cock (Con-CHR-
053KN Jaquar make)
15mm dia CP two in one bib cock (Con-CHR-
041KN Jaquar make)
15 mm dia CP S.B. Bib cock(CON-CHR-
15mm dia CP Long Body Bib cock (Con-CHR-
107KN Jaquar make)
20mm dia CP consealed stop cock(Con-CHR-
083KN Jaquar make)
285 17 25mm dia brass full way valve (Shakti make) Each 10.00 1095.28 10,952.76
286 18 32mm dia brass full way valve (Shakti make) Each 5.00 1603.50 8,017.51
287 19 40mm dia brass full way valve (Shakti make) Each 5.00 2035.85 10,179.27
15mm dia CP Health faucet (Con-ALD-MCH-
573 Jaquar make)
289 21 15mm CP Extension piece Each 80.00 69.97 5,597.92
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying all materials , labour, T&P and
fixing rotational moulded polyethylene
cylindrical vertical water storage tanks
conforming to IS:12701/1996 including
cutting holes through the tank and fixing mild
steel tubes and fittings and providing extra
sockets and jam nuts, fixing ball valve etc.
including hoisting upto a height of 5 metres
above ground level and placing the tank to
the required position and providing 5.40 mtr.
lengthx0.25 mtr width KB brickwork in
cement mortar (1:6) of 0.46m height in
staging and 0.13mtr thick circular protection
292 24 wall of 0.46mtr height to support the 0 0.00 0.00 0.00
tank,12mm thick cement plaster in cement
mortar (1:6) over brick work, RCC slab of size
1.60mX1.60m and 0.10m thick ,RCC beam of
0.25mx0.30m and 3.40m average length in
cement concrete (1:2:4) using 12mm size
crusher broken hard black granite chips and
required steel reinforcement including
centering and shuttering,watering,curing ,cost
of all materials,conveyance of all materials to
worksite , payment of royalty, all taxes etc.all
complete as per approved drawing , P.H.
specification and direction of Engineer-in-
293 25 2000 liters capacity PVC water storage tank Each 6.00 42437.76 2,54,626.54
supplying all materials, labour, T&P and
cutting holes through existing brick work
including making good the damages in
cement mortar (1:4) for taking G.I. Pipes and
294 26 fittings/ P.V.C. pipes and fittings including 0 0.00 0.00 0.00
watering, curing, cost & conveyance of all
materials to worksite, payment of royality,
taxes etc. all complete as per direction of
Engineer-in-charge.
Supplying all materials , labour, T&P and
cutting holes in RCC floors and roofs upto
19cm thick for passing P.V.C pipes and G.I
fittings etc. , and repairing the holes after
insertion of pipe etc. with cement concrete
(1:2:4) including finishing complete so as to
make it leak-proof as per P.H. specification
and direction of Engineer-in-charge
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying all materials, labour, T&P and
cutting grooves in pucca floors and walls for
taking G.I./P.V.C. pipes and making good the
298 30 damages including watering , curing , cost & 0 0.00 0.00 0.00
conveyance of all materials to worksite,
payment of royality, taxes etc all complete as
per direction of the Engineer-in-charge.
Supplying all materials, labour, T&P and
fitting and fixing U-PVC SWR soil waste
ventilating pipes and fittings of the following
outside diameter conforming to ISI No
13592/1992 to walls with nails, bobbins and
wooden plugs or laying in trenches including
jointing with supply of approved rubber
lubricant by non-heat application method/as
per manufacturer's specification, testing,
earthwork in excavation in all kinds of soil and
refilling of trenches , cost & conveyance of all
materials to worksite, payment of taxes etc.
all complete as per P.H specification and
direction of the Engineer-in-charge.
110mm U-PVC SWR Pipe (Supreme
110mm U-PVC ‘P’ Trap(Ori
Plast/Finolex/Supreme Make)
110mm U-PVC door bend(Ori
Plast/Finolex/Supreme Make)
110mm U-PVC Plain bend(Ori
Plast/Finolex/Supreme Make)
110mm U-PVC offset without ear(Ori
Plast/Finolex/Supreme Make)
110mm U-PVC Cowl(Ori
Plast/Finolex/Supreme Make)
110mm U-PVC S/Jn door(Ori
Plast/Finolex/Supreme Make)
110mm U-PVC Plain tee(Ori
Plast/Finolex/Supreme Make)
110mm U-PVC D/Jn door(Ori
Plast/Finolex/Supreme Make)
110mm U-PVC Door tee(Ori
Plast/Finolex/Supreme Make)
110mm U-PVC Socket(Ori
Plast/Finolex/Supreme Make)
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying all materials, labour, T&P and
fixing vitreous china water closet, squatting
pan (Indian type W.C pan/Orissa pattern
squatting pan) duly embedded in cement
concrete (1:5:10) using 4cm size hard granite
metal including fixing a pair of vitreous china
250mm x 130mm x30mm footrest, fixing
100mm dia HCI 'p' or 's' trap (with/without
50mm dia horn) for water colset squatting
pan including jointing the trap with pan in
cement mortar (1:1) cutting the floor and
mending good the damages , cost &
conveyance of all materials to worksite,
payment of royality , taxes etc. all complete
as per P.H specification and direction of the
Engineer-in-charge.
580mm size Orissa pan
(Hindware/Parryware/Neycer make)
Supplying all materials, labour T&P and and
fixing 12.50 liters/10 liters capacity low level
flushing cistern with a pair of cast iron or M.S.
brackets complete with fittings such as
siphonic arrangements 15mm nominal size
brass/pvc ball valve with polythene float CP
brass handle,unions and couplings for
connection with inlet, outlet and overflow
314 46 pipes, 32mm dia CP long flush bend, 15mm 0 0.00 0.00 0.00
dia pvc inlet connection pipe including cutting
holes and making good the same and
connecting the flush bend with cistern and
closet and connceting the inlet pipe with
suupply main , cost & conveyance of all
materials to worksite, payment of taxes etc.
all complete as per P.H specification and
direction of the Engineer-in-charge
10 ltr. Capacity pvc L.L. cistern with 32mm.
315 47 Dia CP long flush bend ( Slimline-white- Each 20.00 1853.07 37,061.44
Parryware make )
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying all materials, labour, T&P and
fixing the following vitreous china Wash
Down Water Closet(European type W.C.
pan)with integral 'p' or 's' trap to the floor with
wooden plug and chromium plated pedestal
screws including jointing the trap with soil
pipe in cement mortar (1:1) fixing plastic seat
and cover for wash down water closet with
chromium plated brass hinges and rubber
buffers including polishing , cost &
conveyance of all materials to worksite,
payment of royality, taxes etc. all complete
as per P.H specification and direction of the
Engineer-in-charge
European water closet with 'p' trap
plain(Hindware/Parryware/Neycer make)
Supplying all materials, labour T&P and fixing
wash basins with hole for pillar taps with cast
iron or M.S.brackets painted white including
cutting holes in walls and making good the
damages with supply of wooden plugs,
screws and cement etc, fixing pedestal for
wash basin recessed at the back for the
reception of pipes and fittings, fixing PVC
waste pipe of 32mm nominal diameter for
wash basin including brass check nut
318 50 complete, fixing pillar taps capstan head 0 0.00 0.00 0.00
screw down high pressure lettered 'Hot' and
'Cold' with long screws, shanks and back nuts
of 15mm dia nominal bore, fixing 15mm dia
PVC inlet connection pipe and making
connection with pillar cocks and supply mains
for wash basin, fixing 32mm dia CP brass
waste, cost & conveyance of all materials to
worksite, payment of taxes etc. all complete
as perP.H specification and direction of the
Engineer-in-charge
550mmx400mm W.H.basin
(Hindware/Parryware/Neycer make)with
319 51 15mm dia C.P.pillar cock (Plaza make) with Each 10.00 4636.10 46,361.02
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying all materials, labour, T&P for fitting
& fixing plain edge kitchen/wall sink of all
standard sizes with a pair of bracket, C.P.
320 52 waste, trap & P.V.C. waste pipe & painting Each 4.00 5843.48 23,373.91
brackets including supply of cement concrete
& mortar etc. all complete. 24” x 18” x 10”
Supplying all materials, labour, T&P and
fixing standard sized CP towel rail complete
321 53 with CP brass brackets fixed to wooden plugs 0 0.00 0.00 0.00
with CP screws as per specification and
direction of the Engineer in charge
322 54 25mmx600mm long CP towel rail Each 10.00 827.65 8,276.52
Supplying all materials, labour, T&P and
fixing standard sized glass-shelf with CP
brass brackets and guard rail complete fixed
to wooden plugs with CP screws as per
specification and direction of Engineer in
600mmx125mm plate glass shelf with CP/NP
Supplying all materials, labour, T&P and
fixing mirror of superior glass mounted on
6mm.thick A.C. sheet or ply wood sheet and
fixed to wooden plugs with CP screws and
washers complete as per specification and
direction of Engineer in charge.
600mmx450mm size B.E mirror (swivelled
Supplying all materials, labour, T&P and
fixing CP soap holder complete with CP
328 60 brass brackets fixed to wooden plugs with CP 0 0.00 0.00 0.00
screws as per specification and direction of
the Engineer in charge
Supplying all materials labor T&P & Fitting &
fixing CP shower with rim with supply of red
lead and yarn nail complete as per direction
of Engineer in charge.
331 63 ½” x 5” CP Shower (Plaza Deluxe Make) Each 10.00 570.53 5,705.30
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying all materials , labour, T&P and
cutting holes through existing brick or laterite
masonry wall for taking U-PVC pipes and
fittings including making good the damages
etc. all complete as per P.H. specification and
direction of Engineer-in-charge
Supplying all materials , labour, T&P and
cutting of RCC chajja for taking HCI or U-
PVC pipe and fittings including making good
the damages etc. all complete as per P.H.
specification and direction of Engineer-in-
Supplying all materials ,labour ,T&P and
constructing Inspection Chamber of inside
size 760mmx760mmx460mm with cement
concrete (1:3:6) using 40mm size crusher
broken hard black granite metal on bed , KB
brick work in cement mortar (1:6) in
foundation and plinth, moulding and shaping
the channel inside and benching with cement
concrete (1:2:4) using 12mm size crusher
broken hard black granite chips, 12mm thick
cement plaster (1:3) with cement punning to
inside, cement flush pointing (1:3) to outside,
R.C.C cover slab (1:2:4) using 12mm size
crusher broken hard black granite chips with
R.C.C man hole cover, earth work in
excavation in all kinds of soil and refilling the
cavity around the chamber including
watering,curing,cost of all materials,
conveyance of all materials to worksite,
payment of royalty,all taxes etc.all complete
as per approved drawing, P.H specification
and direction of Engineer-in-charge
Inside size 76cmx76cmx46cm with 18” dia
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying all materials ,labour ,T&P and
constructing gully trap chamber of inside size
250mmx250mm with 8cm thick RCC precast
cover slab in cement concrete (1:2:4) mix
using 12mm size crusher broken HG chips,
foundation concrete (1:4:8) using 40mm size
crusher broken HG metal on bed and around
336 68 trap, KB brick work in cement mortar (1:6) in Each 10.00 1719.97 17,199.68
foundation and plinth and inside 12mm thick
cement plastering (1:3) finished with a
floating coat of neat cement including fixing
100mmx100mm size HCI gully trap,
150mmX150mm size CI grating etc.all
complete as per drawing, specification and
direction of Engineer-in-charge
Supplying all materials labour T&P filling
sand in lavatories well watered and rammed
including lead of materials to work site.234 x
Supplying all materials, labour, T&P and
providing cement concrete ( 1:3:6 ) with
40mm size crusher broken hard black granite
metal including watering, curing,cost of all
materials, conveyance of all materials to work
site with payment of royalty, all taxes etc all
complete as per P.W.D specification and
direction of Engineer-in-charge. 234 x 0.10
Supplying all materials, labour, T&P and
providing cement concrete ( 1:2:4 ) with
12mm size crusher broken hard black granite
chips including watering, curing,cost of all
materials, conveyance of all materials to work
site with payment of royalty, all taxes etc all
complete as per P.W.D specification and
direction of Engineer-in-charge 234 x 0.10
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying all materials, labour, T&P and
providing and fixing ceramic tiles in floors,
treads or steps and landing on 25mm thick
bed of cement mortar (1:1) ( 1 cement : 1
sand ) jointed with neat cement slurry mixed
with pigment to match the shades of the tiles
including watering, curing,cost of all
materials, conveyance of all materials to work
site , payment of royalty, all taxes etc all
complete as per P.W.D specification and
direction of Engineer-in-charge ( ceramic
floor tiles of premium grade having thickness
7mm to 8mm conforming to IS 13755 of size
Kajaria/Somany/Johnson tile 60cmx60cm
special printed series to be pre-approved by
the Engineer-in-charge )
341 73 Kajaria/Somany/Johnson tile 60cmx60cm 0 0.00 0.00 0.00
Supplying all materials,labour,T&P and
providing 12mm thick cement plaster(1:4) on
brick work including watering,curing,cost of all
346 78 materials, conveyance of all materials to 0 0.00 0.00 0.00
worksite,payment of royalty,all taxes etc.all
complete as per PWD specification and
direction of the Engineer-in-charge.
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying all materials, labour, T&P and
providing and fixing porcelain glazed tiles in
dado skirting on 12mm thick cement plaster
(1:3) jointed with neat cement slurry mixed
with pigment to match the shades of the tiles
including watering, curing,cost of all
materials, conveyance of all materials to work
348 80 site , payment of royalty, all taxes etc all 0 0.00 0.00 0.00
complete as per P.W.D specification and
direction of Engineer-in-charge( ceramic wall
tiles of premium grade having thickness
6.5mm to 6.7mm conforming to IS 13753 of
size Kajaria/Somany/Johnson tile
60cmx30cm special plain / printed series to
be pre-approved by the Engineer-in-charge )
349 81 Kajaria/Somany/Johnson tile 30cmx20cm 0 0.00 0.00 0.00
Factory made single leaf Solid WPC (Wood
polymer) composite door shutter of 25mm
thickcompacted with wood grain finish
structural foam panel of 29mm thickness and
a density of 20kg/cu.mtr shall be used as
core material for fitting the metal fittings such
as tower bolts, aldrops, handles etc shall be
provided. A structural adhesive compatible
with (EPS) foam shall be used for bending
the core material, The material and process
353 85 for manufacturing the door shutters shall sqm 15.75 4048.11 63,757.70
conform to RV-TIFAC composites Design
Centre's standards and specifications and the
door shutters Conforming to relevant
I.S.specification. The finish of door shutter
will be plain colour white/ Ivory/ Beige/ Light
grey/ Mahogany/ Teak wood or any other
colour using high quality pigments. Three
heavy whight mild steel butt hinges type-I(ISI
marked) size 100mm are to be fitted on one
side of shutter.
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Factory made Solid WPC door frame of size
95mmx55mm fabricated .The door frame
consist of four segments which are provided
with plug-in-socket arrangement in-situ in the
mould. The segments are plugged in and are
joined together by means of screw. The WPC
frame shall be provided with The material and
process for manufacturing the door frames
shall conform to Relavent I.S.specification.
The finish of door frame will be plain colour
white/ Ivory/ Beige/ Light grey/ Golden
brown/Mahogany/ Teak wood/sand
stone/Champagne/Pastel blue or any other
colour using high quality pigments complete
in all respect as per specification and
direction of the Engineer in charge
Supplying all materials, labour, T&P and
laying in trenches (to level or slope)
unplasticized P.V.C. pipe conforming to IS
4985/2000 of the following out side dia for
class- 3 (0.60mpa ) including jointing with
supply of approved solvent cement by non-
heat application method/as per manufacture's
specification, provoding and laying in trench
cement concrete (1:4:8) with 40mm size hard
granite metal in the type C-1 standard
bedding surrounding or encasing including
concrete for bedding and curing etc all
complete as per P.H. specification and
direction of the Engineer in charge
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying all materials labor T&P and
constructing MH chamber of sizes earth work
in excavation in all kinds of soil CC(1:1:8)
with black granite chips size 46mm brick work
with K.B. brick having crossing strength not
less than 75 Kg /CM2 to 90 Kg/CM2s in
CM(1:6)12mm C.P(1:8) inside MH chamber
over benching with cement slush pointing
358 90 (1:3)outside the MH chamber providing 0 0.00 0.00 0.00
painting MS or CI step iron RCC(roof of slab
with CC(1:2:4)with black granite chips size
12mm bending binding tying the grills placing
of the reinforcement providing RCC color of
required size refilling the cavity around the
MH chamber with excavated earth including
channeling the bed of MH etc all complete as
per PH specification.
MH size 0.91m x 0.91 m with 0.45 m (18” dia
Supplying all materials labour T&P and
constructing 1.20m dia x 2.00 m deep soak
way pit with dry brick having crossing strength
not less than 75Kg/CM2 to 99Kg/CM2 in
CM(1:6) for the remaining 0.4572mm height
of wall at top CC(1:3)inside and outside
inside fill with dry brick khoa size 38mm ,CM
360 92 thick RCC perforated slab to a height of Each 4.00 19544.46 78,177.83
1.9012m from bottom covered by means of
50mmthick RCC wall cover in pieces filled
with iron plugs including earth work in
excavation refilling of cavity around the pit
and painting the iron works complete as per
PHD design and specification including
carriage of all materials to site.
361 93 Sub-Total of Plumbing Works 0 0.00 0.00 16,93,018.72
362 0 Electrical Works 0 0.00 0.00 0.00
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Recessed wirring to light point/ fan point/
exhaust fan point/ call bell point with 1.5
sq.mm FRLSH/LSZH PVC insulated copper
conductor of ISI marked Make-
Finolex/Anchor/Polycab/HAVELLS/RR
KABLE/KEI or equievalant reputed make A
catagory ISI marked as approved with 20 mm
dia PVC flexible non metallic conduit FRLS
type ISI marked Make-AKG/Anchor/Havells
or equievalant reputed make A catagory ISI
marked as approved 6A modular type (anti
bactorial & flame retradant type) switch ISI
marked Make-Schneider/legrand/Panasonic
or equievalant reputed make & model A
catagory ISI marked as approved, and ceiling
rose ISI marked Make- Anchor/Havells of
modular type G.I box with metallic cover plate
(both side) (anti bactorial & flame retradant
type) Make-Schneider/legrand /Panasonic or
equievalant reputed make & model A
catagory ISI marked as approved of suitable
size, modular box with 1.5 sq. Mm FRLSH
PVC insulated single core multistandard
copper conductor as earth wire including all
accessories and connection as per direction
of Engineer -in -Charge. CATAGORY AS
FOLLOWS ,complete suitable for IPH
standard hospital. All the switches & sockets
should be warrantied for a replacement
period of 2 years against defects with
ncessary test report & Warrnaty certificate to
be submitted to the department for genuinity
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Group control of point in Recessed wirring to
light point/ fan point/ exhaust fan point/ call
bell point with 1.5 sq.mm FRLSH/LSZH PVC
insulated copper conductor of ISI marked
Finolex/Anchor/Polycab/HAVELLS or
equievalant reputed make A catagory ISI
marked as approved as approved 20 mm dia
PVC flexible non metallic conduit FRLS type
ISI marked Make-AKG/Anchor/Kinjal or
equievalant reputed make A catagory ISI
marked as approved with 6A modular
type((anti bactorial & falme retradant type))
switch ISI marked Make-Schneider/legrand
/Panasonic or equievalant reputed make &
model A catagory ISI marked as approved,
and ceiling rose ISI marked Make-
Schneider/legrand/Panasonic or equievalant
reputed make & model A catagory ISI marked
as approved of modular type G.I box with
metallic cover plate (both side)(anti bactorial
& falme retradant type) Make-
Schneider/legrand /Panasonic or equievalant
reputed make & model A catagory ISI marked
as approved, of suitable size, modular box
with 1.5 sq. Mm FRLS PVC insulated single
core multistandard copper conductor as earth
wire including all accessories and connection
as per direction of Engineer -in -Charge.
CATAGORY AS FOLLOWS ,complete
suitable for IPH standard hospital.(Maximum
02 nos point in one circuit).All the switches &
Supplying ,fixing of 6A Plug on the same
board in existing switch board with complete
fitting by 01 no of 6A switch & socket
(modular type)( (anti bactorial & flame
retradant type)) & other required accessories
of ISI marked as approved as per direction of
Engg. -in -Charge. Make-
Schneider/legrand/Panasonic or equievalant
reputed make & model A catagory ISI marked
as approved, complete suitable for IPH
standard hospital.(Maximum 02 nos point in
one circuit).All the switches & sockets should
be warrantied for a replacement period of 2
years against defects with ncessary test
report & Warrnaty certificate to be submitted
to the department for genuinity of product &
to avail free aftersales service within warranty
period for acceptance of materials.
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying,fixing of 6A Plug on the separate
board with complete fitting by 01 no of 6A
switch & socket(modular type)( (anti bactorial
& flame retradant type)) with suitable size
modular box & cover(anti bactorial & falme
retradant type) including supplying of all
required accessories of ISI marked as
approved as per direction of engg-in-
charge..Make-Schneider(Zencelo)/legrand(
Arteor) /Panasonic (vision) or equievalant
369 7 make & model ISI marked as approved , Nos 20.00 599.44 11,988.80
complete suitable for IPH standard
hospital.(Maximum 02 nos point in one
circuit).All the switches & sockets should be
warrantied for a period of 10 years against
manufacturing defects against which
ncessary test report & Warrnaty certificate to
be submitted to the department for genuinity
of product & to avail free aftersales service
within warranty period for acceptance of
Supplying,fixing of 1x16A Plug on the
separate board with complete fitting by 01 no
of 16A switch & socket(modular type)((anti
bactorial & flame retradant type)) with
suitable size modular box & cover(anti
bactorial & falme retradant type) including
supplying of all required accessories of ISI
marked as approved as per direction of engg-
in-charge.. Make-
370 8 Schneider/legrand/Panasonic or equievalant Nos 20.00 761.10 15,222.00
reputed make A catagory ISI marked as
approved, (For equipement power)All the
switches & sockets should be warrantied for a
replacement period of 10 years against
defects with ncessary test report & Warrnaty
certificate to be submitted to the department
for genuinity of product & to avail free
aftersales service within warranty period for
acceptance of materials.
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying,fixing of 2x6A+1X1 6A Plug on the
separate board with complete fitting by 01 no
of 16A+2 no 6A switch & socket(modular
type) ( (anti bactorial & falme retradant type)
with suitable size modular box & metallic
cover plate (both side)(anti bactorial & falme
retradant type)including supplying of all
required accessories of ISI marked as
approved as per direction of engg-in-
charge..Make-Schneider/legrand
/Panasonicor equievalant reputed make &
model A catagory ISI marked as approved,
(For equipement power)complete suitable for
IPH standard hospital.(Maximum 02 nos point
in one circuit).All the switches & sockets
should be warrantied for a replacement
period of 10 years against defects with
ncessary test report & Warrnaty certificate to
be submitted to the department for genuinity
of product & to avail free aftersales service
within warranty period for acceptance of
Supplying,fixing of 3x6A+1X1 6A Plug on the
separate board with complete fitting by 01 no
of 16A+3 nos 6A switch & socket(modular
type) ( (anti bactorial & falme retradant type)
with suitable size modular box & metallic
cover plate (both side)(anti bactorial & falme
retradant type)including supplying of all
372 10 required accessories of ISI marked as Nos 8.00 2323.42 18,587.36
approved as per direction of engg-in-
charge..Make-Schneider/legrand /Panasonic
or equievalant reputed make & model A
catagory ISI marked as approved, (For
equipement power)complete suitable for IPH
standard hospital.(Maximum 02 nos point in
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Receass wiring for circuit/submain wiring with
the following mentioned size PVC
FRLSH/LSZH insulated, copper conductor,
single core cable (Finolex/Anchor/Polycab/
HAVELLS/RR KEBLE) or equievalant
reputed make A catagory ISI marked as
approved, in recessed PVC conduit Heavy
373 11 duty FRLS of mentioned size 0 0.00 0.00 0.00
(AKG/Anchor/Kinjal or equievalant ISI
marked as approved) as required as per
direction of Engg.-in-Charge. Ncessary test
report & Warrnaty certificate to be submitted
to the department for genuinity of product &
to avail free after sales service within
warranty period for acceptance of materials
2 nos single core 1.5 sq. mm copper wire for
phase and neutral and 01 no of single core
1.5 sq. mm copper wire for earth continuty
conductor. In 20 mm dia non metallic heavy
duty flexible conduit (LDB to LSB/LIGHT
2 nos single core 2.5 sq. mm copper wire for
phase and neutral and 01 no of single core
1.5 sq. mm copper wire for earth continuty
375 13 conductor in 20 mm dia non metallic heavy Mtr 90.00 171.10 15,399.00
duty flexible conduit.(BDB to LSB/LIGHT
CKT/5A PLUG/INVERTER POINT TO EACH
4 nos single core 2.5 sq. mm copper wire for
phase and neutral and 02 nos of single core
2.5 sq. mm copper wire for earth continuty
conductor .in 25 mm dia non metallic heavy
duty flexible conduit(LDB to LSB/5A
SOCKET) (4X2.5+2X2.5)
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
2 nos single core 4 sq. mm copper wire for
phase and neutral and 01 no of single core
1.5 sq. mm copper wire for earth continuty
conductor in 20 mm dia non metallic heavy
duty flexible conduit .(PDB to PSB/ GAYSER
POINT/AC POINT/ROOM LIGHT CONTROL
TO CORRIDOOR POINT/DG PANEL
ESSENTIAL LOAD) (2X4+1X1.5)
4 nos single core 4 sq. mm copper wire for
phase and neutral and 02 nos of single core
2.5 sq. mm copper wire for earth continuty
conductor in 32 mm dia non metallic heavy
duty flexible conduit.(PDB to PSB/GAYSER.
POINT/AC POINT/DG PANEL ACCL TO
EACH QTR ESSENTIAL LOAD)
2 nos single core 6 sq. mm copper wire for
phase and neutral and 01 no of single core
2.5 sq. mm copper wire for earth continuty
conductor in 25 mm dia non metallic heavy
duty flexible conduit .(LFDB TO LBDB)
4 nos single core 6 sq. mm copper wire for
phase and neutral and 02 nos of single core
2.5 sq. mm copper wire for earth continuty
conductor in 32 mm dia non metallic heavy
duty flexible conduit.(LFDB TO LBDB/power
unit/point) (4X6+2X2.5)
4 nos single core 10 sq. mm copper wire for
phase and neutral and 02 nos of single core
4 sq. mm copper wire for earth continuty
conductorin 32 mm dia non metallic heavy
duty flexible conduit .(LFDB TO FLOOR
PANEL TO TPN BDB light ) (4X10+2X4)
4 nos single core 16 sq. mm copper wire for
phase and neutral and 02 nos of single core
10 sq. mm copper wire for earth continuty
conductor in 40 mm dia non metallic heavy
duty flexible conduit.(FLOOR PANEL TO
TPN BDB power) (4X16+2X10)
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supply and drawing of following sizes FRLS
PVC insulated single core multistrand copper
conductor in existing surface / PVC conduit
Supplying and fixing of following Modular
type switch / socket on the existing switch box
/ cover including connections etc as
required.Make-L&T/Legrand/Roma
389 27 5/6Amps modular switchswitch No 20.00 81.42 1,628.40
390 28 5/6Amps modular socket No 16.00 87.32 1,397.12
391 29 15/16Amps modular switch No 19.00 128.62 2,443.78
392 30 15/16Amps modular socket No 19.00 177.00 3,363.00
Supplying and fixing of following Modular
393 31 type base & cover as follow.Make- 0 0.00 0.00 0.00
L&T/Legrand/Roma
394 32 Modular blanking plate No 12.00 20.12 241.43
395 33 Modular base & cover for 1 module No 16.00 71.35 1,141.67
396 34 Modular base & cover for 2 module No 14.00 105.20 1,472.76
397 35 Modular base & cover for 4 module No 14.00 146.36 2,048.98
398 36 Modular base & cover for 6 module No 15.00 188.43 2,826.51
399 37 Modular base & cover for 8 module No 15.00 225.03 3,375.39
400 38 Modular base & cover for 12 module No 8.00 320.16 2,561.26
Supplying and fixing 20 amps, 240 volts,
SPN, industrial type socket outlet, with 2 pole
and earth metal enclosed plug top along with
32 amps. C-series, SP MCB, in sheet steel
401 39 enclosure, on surface or in recess, with Nos 10.00 726.88 7,268.80
chained metal cover for the socket outlet, and
complete with connections, testing and
commissioning etc. as required as per
direction of Engg.-in-Charge.
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying and fixing 32 amps, 415 volts,
TPN, industrial type socket outlet, with 4 pole
and earth metal enclosed plug top along with
32 amps. C-series, TP MCB, in sheet steel
enclosure, on surface or in recess, with
chained metal cover for the socket outlet, and
complete with connections, testing and
commissioning etc. as required as per
direction of Engg.-in-Charge.. . Equievalant
higher model of Make-
Legrand/Schneider/Siemens/panasonic
equievalant reputed make & model A
catagory ISI marked as approved.All the
Components should be warrantied for a
replacement period of 5 years against
defects with ncessary test report & Warrnaty
certificate to be submitted to the department
for genuinity of product & to avail free
aftersales service within warranty period for
acceptance of materials.
Supplying and fixing following size/ modules,
GI box along with modular base & metallic
cover plate (both side)(anti bactorial type)
plate for modular switches in recess etc as
required as per direction of Engg.-in-Charge.
MAKE-Legrand/Siemens/Anchor/Panasonic/
Schneider or equievalant reputed make &
403 41 model A catagory ISI marked as approved 0 0.00 0.00 0.00
.All the Components should be warrantied for
a replacement period of 5 years against
defects with ncessary test report & Warrnaty
certificate to be submitted to the department
for genuinity of product & to avail free
aftersales service within warranty period for
acceptance of materials.
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying and fixing of following sizes of
medium class PVC FRLS conduit ISI marked
along with accessories in surface/recess
including cutting the wall and making good
407 45 the same in case of recessed conduit as 0 0.00 0.00 0.00
required as per direction of Engg.-in-Charge
.MAKE KINJAL/ AKG/Anchor or equievalant
reputed make A catagory ISI marked as
Supply and fixing modular type indicator on
the existing switch box/cover . Equievalant
higher model of
Schneider/Hager/Siemens/Anchor/Panasonic
make or equievalant reputed make & model
A catagory ISI marked as approved as
required as per direction of Engg.-in-
Charge.All the Components should be
warrantied for a replacement period of 5
years against defects with ncessary test
report & Warrnaty certificate to be submitted
to the department for genuinity of product &
to avail free aftersales service within warranty
period for acceptance of materials.
Supplying and installation of AC starter
Modular type, Equievalant higher model of
Schneider/Hager/Siemens/Anchor/Panasonic
make or equievalant reputed make & model
A catagory ISI marked as approved coil
voltage-415 Volt A.C. & O/L range of 9-14A
range on mod Box of suitable size including
411 49 modular coveras required as per direction of Nos 10.00 730.42 7,304.20
Engg.-in-Charge .All the Components should
be warrantied for a replacement period of 5
years against defects with ncessary test
report & Warrnaty certificate to be submitted
to the department for genuinity of product &
to avail free aftersales service within warranty
period for acceptance of materials.
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supply and fixing CALL bell (Ding dong type)
/Buzzer on the existing switch box/cover.
Equievalant higher model of
Schneider/Hager/Siemens/Anchor/Panasonic
make or equievalant reputed make & model
A catagory ISI marked as approved .as
required as per direction of Engg.-in-
Charge.All the Components should be
warrantied for a replacement period of 5
years against defects with ncessary test
report & Warrnaty certificate to be submitted
to the department for genuinity of product &
to avail free aftersales service within warranty
period for acceptance of materials.
S/F of Bakelite angle holder/batten holder
(make-Anchor/Havells/Panasonic or
equievalant reputed make A catagory ISI
marked as approved )of ISI marked
conforming to IS-1258/1987 in place of
ceiling rose as per direction of Engg.-in-
413 51 Charge .All the Components should be EACH 100.00 71.98 7,198.00
warrantied for a replacement period of 5
years against defects with ncessary test
report & Warrnaty certificate to be submitted
to the department for genuinity of product &
to avail free aftersales service within warranty
period for acceptance of materials.
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying,fixing of Blanking plate(modular
type)( (anti bactorial & flame retradant type))
in existing switch box(anti bactorial & flame
retradant type) including supplying of all
required accessories of ISI marked as
approved as per direction of engg-in-
charge..Make-Schneider/legrand /Panasonic ,
414 52 complete suitable for IPH standard hospital.It Nos 10.00 49.56 495.60
should be warrantied for a period of 2 years
against manufacturing defects against which
ncessary test report & Warrnaty certificate to
be submitted to the department for genuinity
of product & to avail free aftersales service
within warranty period for acceptance of
Supplying, installation, of exhaust fan of
heavy duty 300 mm sweep (Make-
Equievalant higher model with 5 star rated of
Havells/almonard/Anchor/Panasonic/Usha or
equievalant reputed make & model A
catagory ISI marked as approved ) of
exhaust fan in the existing wall, including
fixing & conntection as required as per
direction of Engg.-in-Charge. Replacement
Warranty will be 5 years.
Supplying, installation, testing and
commssioning of 1200 mm sweep
white/milky colour ceiling fan Make-
Equievalant higher model with 5 star rated of
Havells/almonard/Anchor/Panasonic/Ushaor
equievalant reputed make & model A
416 54 catagory ISI marked as approved ) including Nos 20.00 2505.14 50,102.80
wiring the down rod of standard length (upto
30 cm) with 1.5 sq mm PVC insulated, copper
conductor, single core cable etc. as required
as per direction of Engg.-in-
Charge,Replacement Warranty will be 5
years.. .(With fan Regulator)
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying and fixing of Energy efficient
Recess mounted LED luminaire made up of
CRCA powder coated sheet steel housing of
595 X 595 mm x 70 mm size with of not
more than 25W and system lumens output
not less than 3250 lumens (130 lm/ wt) with
diffusers for better light transmission and
pure effect with High luminous flux LEDs for
better light output, CRI not less than 80, CCT
of 5700-6500 degree K, THD less than
10%,internal surge protection of 3 KV,
complete with Non integrated isolated
417 55 electronic driver (protects the output No 10.00 3158.86 31,588.60
/secondary side from any disturbance on the
input / primary side ensuring safe
operation)and all other accessories suitable
for operation on140- 270 V, 50 Hz ,L70
@50,000 burning hrs (5 years
warranty)supply .as required as per direction
of Engg.-in-Charge (Make:
Panasonic/LT/Trilux /Philips/Wipro or
equievalant reputed make & model A
catagory ISI marked as approved.) . The
luminaire must be Replacement Warranty will
Supplying and fixing of Energy efficient
recessed mounted LED luminaire made up
of CRCA powder coated housing, Top
opening clean room LED luminaire of 600 X
600 x 65 mm size with of 45 W and system
lumens output not less than 4500 lumens ,
IP65 ,dust free & zero maintenance , anti
glare high transmittance PMMA diffuser ,
operating volatge range 150-265 V, high
performance potentiometric electronic driver
for zero maintenance , 2.5 KV internal urge
less than 80, CCT of 5700-6500 degree K,
THD less than 10%,,IP 65 protection
complete with all other accessories suitable
for operation on 230 V, 50 Hz supply as
required as per direction of Engg.-in-Charge.
(Make:Panasonic /PHILIPS/ Wipro or
equievalant reputed make & model A
catagory ISI marked as approved ) .The
luminaire should be Replacement Warranty
will be 5 years. .Each CLEAN ROOM
FITTING FOR OT ICU MRI CT.
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying and fixing of Energy efficient
surface mounted square shape 20 W LED
luminaire of dimension of 225x 225 x 35 mm
consists of white powder coated , die-cast
Alluminium housing with high quality frosted
diffuser for glare-free uniform lighting
distribution with wattage not more than 20
watt and lumen output of 1500 lumens, , CRI
not less than 80,CCT of 6000 degree K,THD
419 57 less than 10%, with electronic driver, internal Nos 20.00 1791.24 35,824.80
surge protection of 2.5 KV , L70 B50: 30000
hrs (2 yrs warranty) and all other accessories
suitable for operation on 220 V to 240 V
supply as required as per direction of Engg.-
in-Charge. ( Make : Panasonic
/Trilux/Osram/PHILIPS/Wipro or equievalant
reputed make & model A catagory ISI marked
as approved).The luminaire should be
Replacement Warranty will be 5 years
Supplying and fixing of Energy efficient
recess mounted LED luminaire with white
powder coated ,pressure die-cast Al housing
,with high transmititivity,non-yellowing PMMA
diffuser, with wattage not more than 20 watt
and lumen output not less than 2600 Lumen (
130 lumens/watt ) of size 595 x595 x 70 mm ,
,CRI not less than 80,CCT of 5700-6500
degree K,THD less than 10%, with Non
integrated isolated driver (protects the output
/secondary side from any disturbance on the
input / primary side ensuring safe operation),
all other accessories , life : 50,000 burning
hours (5 years warranty) , Internal surge
protection of 3 KV suitable for operation on
230 V, 50 Hz supply as required as per
direction of Engg.-in-Charge. ( Make :
Panasonic / LT /Wipro/PHILIPS or
equievalant reputed make & model A
catagory ISI marked as approved.) The
luminaire should be Replacement Warranty
will be 5 years.
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
SITC of energy efficient LED tube light fittings
with decorative alluminium batten and LED
tube light having power rating not more than
20 watt and lumen output not less than 2200
lumen complete with electronic driver and all
other accessories with diffuser having 5
years warranty i/c connection etc as required
as per direction of Engg.-in-Charge. (
SITC of Sleek LED 10 watt mirror light fitting
with extruded polycarbonate housing,High
optically efficient diffuser,above wash basin
complete with all accessoriesetc. directly on
422 60 wall, including connection with 1.5 sq. mm Nos 10.00 863.76 8,637.60
FRLS PVC insulated, copper conductor,
single core cable and earthing etc. as
required as per direction of Engg.-in-Charge.
SITC of IP 20 Non-integral flexible LED strip
light,High optically efficient diffuser,, 4000K
423 61 with 12 w/mtr @ 5Mtr pool with Driver extra Nos 2.00 1792.42 3,584.84
as required as per direction of Engg.-in-
Supplying and fixing of small focus light for
424 62 small monuments as 30W , 5700 K required Nos 2.00 3307.54 6,615.08
as per direction of Engg.-in-Charge
Supplying and fixing extra conduit down rod
of 20 cm length G.I. pipe 15 mm dia, heavy
gauge including painting etc. as requiredas
required as per direction of Engg.-in-Charge .
(Note : More than 5 cm length shall be
rounded to the nearest 10 cm and 5 cm or
less shall be ignored)of ISI mark as
Supply and fixing of Electronics socket type
fan regulator.Make-Legrand/Havells/Anchor
427 65 BDBS,DB,AC DB,FLOOR PANELS,MCBS 0 0.00 0.00 0.00
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying and fixing of following mentioned
way, three pole/single pole and neutral, sheet
steel,double door MCB distribution board,
415 volts/240 volts shall be as per IEC 61439-
3,integrated door earthing system offering
additional safety to the user,High quality
polyurethane Gasket,the box and cover shall
428 66 be fabricated to withstand IK09,the DB should 0 0.00 0.00 0.00
be properly pre-treated with 7 tank process
and duly powder coated, phosphatized with
powder coated finish, on surface/recess,
complete with terminal blocks,with suitable
size FR PVC insulated copper conducter up
to terminal blocks, tinned copper busbar,
neutral busbar, earth bar, din bar.
4 Way(8+12) Way TPN MCB DD DB
Horizontal Type as per IEC 61439-3 suitable
for Flush mounting and Surface mounting
with 100A Copper Bus Bar for each phase,
429 67 with neutral Bus bar, Earth Bar & Cable ties Nos 3.00 2558.24 7,674.72
for cable management, prefitted masking
sheet, IP43-IK09 with metal door(FOR
LIGHT,POWER INDOOR,3-PH,POWER
Supply and fixing of 12 way DD single pole
and neutral sheet steel MCB distribution
board 250V on surface/recess complete with
tinned copper bus bar, neutral bus bar, earth
bar, din bar, detachable gland plate,
430 68 interconnections, phosphatized and powder Nos 3.00 2249.08 6,747.24
painted including earthing etc. as required
(but with out MCB/ RCCB/ Isolator) (ALL
LIGHT WITH CORRIDOOR/COMMON
AREA,EM LIGHT,UPS LOAD, EM LOAD
LIGHT LOAD,POWER LOAD )
2+4 way MCB Enclosure DB (GLAZED
431 69 door)(only each EM. CONNECTION UPS Nos 3.00 1926.94 5,780.82
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
8 Way(8+24) Way TPN MCB DD DB
Horizontal Type as per IEC 61439-3 suitable
for Flush mounting and Surface mounting
with 100A Copper Bus Bar for each phase,
432 70 with neutral Bus bar, Earth Bar & Cable ties Nos 1.00 3188.36 3,188.36
for cable management, prefitted masking
sheet, IP43-IK09 with metal door(FOR
LIGHT,POWER INDOOR,3-PH,POWER
Supplying and fixing 6-20 amps rating, 240
volts, C series, Double poles MCB of in the
existing MCB DB complete with connections
as per direction of Engg.-in-Charge. The
MCB should be Replacement Warranty will
be 5 years .MCB should have the fault
indication system in different colour for ON,
OFF & TRIP condition or Mid trip position for
Trip conditions for easier identification of
Supplying and fixing 6 amps to 32 amps
rating, 240 volts, C series, single poles MCB
of Make-LEGRAND-Ekinox3 DB/ Siemens-
Betaguard/ Schneider- Acti 9/L&T
(Equievalant model)/Panasonic(Equivalant
model) /ABB(Equivalant model) or
equievalant reputed make & model A
catagory ISI marked as approved. the
existing MCB DB complete with connections
as per direction of Engg.-in-Charge. MCB
should have the fault indication system in
different colour for ON, OFF & TRIP condition
or Mid trip position for Trip conditions for
easier identification of fault.
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying and fixing 40 Amps rating, TPN,
415 volts, RCCB,300mA .Make-Equievalant
higher model of Legrand/Snheider/Siemens
/ L&T/Panasonic /ABB or equievalant
reputed make & model A catagory ISI marked
435 73 as approved in the existing MCB DB Nos 3.00 2650.28 7,950.84
complete with connections, testing and
commissioning etc. as required as per
direction of Engg.-in-Charge. .(4W TPN BDB
IC)AC ODU CONTROLLER). The RCCB
should be Replacement
Supplying and fixing 25Amps DP 240 volts,
RCCB,300mA Make-Equievalant higher
model of Legrand/Snheider/Siemens /
L&T/Panasonic /ABBor equievalant reputed
make & model A catagory ISI marked as
approved in the existing MCB DB in the
existing MCB DB complete with connections
as per direction of Engg.-in-Charge. The
RCCB should be Replacement Warranty will
Supplying and fixing 40Amps DP 240 volts,
RCCB,300mA Make-Equievalant higher
model of Legrand/Snheider/Siemens /
L&T/Panasonic /ABB or equievalant reputed
make & model A catagory ISI marked as
approved in the existing MCB DB in the
existing MCB DB complete with connections
as per direction of Engg.-in-Charge. The
RCCB should be Replacement Warranty will
Supplying and fixing 63Amps DP 240 volts,
RCCB,300mA Make-Equievalant higher
model of Legrand/Snheider/Siemens /
L&T/Panasonic /ABB or equievalant
reputed make & model A catagory ISI marked
as approved in the existing MCB DB in the
existing MCB DB complete with connections
as per direction of Engg.-in-Charge.The
RCCB should be Replacement Warranty will
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying and fixing 63Amps TPN 415 volts,
RCCB,300mA Make-Equievalant higher
model of Legrand/Snheider/Siemens /
L&T/Panasonic /ABB or equievalant reputed
make & model A catagory ISI marked as
439 77 approved in the existing MCB DB in the Nos 3.00 3116.38 9,349.14
existing MCB DB complete with connections
as per direction of Engg.-in-Charge.(for
power BDB & AC ODU, 8 way TPN BDB
IC).The RCCB should be Replacement
Warranty will be 5 years
440 78 (Earthing) INSTALLATION 0 0.00 0.00 0.00
S/IT/C Of Earthing with copper earth plate
600 mm x 600mm x 6 mm thick ISI marked
including accessories and providing
441 79 masonary with cover plate having loccking Nos 2.00 16398.46 32,796.92
arrangement and watering pipe etc (WITH
charcoal and salt) as required as per direction
of Engg.-in-Charge.
S/IT/C of materials and installation of pipe
earth electrode made out of 50mm dia class
B G.I. pipe of 3.0 metre long with
arrangements for fitting/ termination of G.I.
flat / wire with G. I. nut bolts & washers
including cost of burnt wood charcoal, salt,
foreign soil, water pouring arrangements,
brick masonary enclosure on top with
removable RCC cover complete with labour
for excavation of pit in all kinds of soil & rock
as required and as per direction of Engineer-
Providing and fixing 4 mm dia copper wire on
443 81 surface or in recess for loop earthing as Mtr 84.00 113.28 9,515.52
required.as per direction of Engg.-in-Charge.
Providing and fixing 25mm x 5 mm copper
strip on surface or in recess for connections
etc. as required as per direction of Engg.-in-
Providing and fixing 50mm x 5 mm copper
strip on surface or in recess for connections
etc. as required as per direction of Engg.-in-
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying and making brick massonary
pedastal with extra super structure including
cement plastering etc as required as per
direction of Engg.-in-Charge.
CABLING AND END TERMINATION MAIN
Supplying of one number PVC insulated
armoured and PVC sheathed XLPE property
AL. conductor power cable of 1.1 KV grade
POLYCAB/HAVELLS/Finolex or equievalant
reputed make ISI marked as approved of
448 86 following size cables as per direction of 0 0.00 0.00 0.00
Engg.-in-Charge. Ncessary test report &
Warrnaty certificate to be submitted to the
department for genuinity of product & to avail
free after sales service within warranty period
for acceptance of materials
Supplying of one number PVC insulated
armoured and PVC sheathed XLPE property
AL. conductor power cable of 1.1 KV grade
POLYCAB/HAVELLS/Finolex or equievalant
reputed make ISI marked as approved of
450 88 following size cables as per direction of 0 0.00 0.00 0.00
Engg.-in-Charge. Ncessary test report &
Warrnaty certificate to be submitted to the
department for genuinity of product & to avail
free after sales service within warranty period
for acceptance of materials
Laying of PVC Insulated PVC Seated /XLPE
power cable of 1.1 kv grade size not
exceeding 25 SQ. MM direct in ground in the
456 94 trench in one horizental formation including Mtr 5.00 153.40 767.00
excavation ,sand coushing protection
covering and refilling the trench etc as
required as per direction of Engg.-in -charge.
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Laying of PVC Insulated PVC Seated /XLPE
power cable of 1.1 kv grade size exceeding
25 SQ. MM but not exceeding 120 SQ. MM
direct in ground in the trench in one horizental
formation including excavation ,sand
coushing protection covering and refilling the
trench etc as required as per direction of
Engg.-in -charge.
Laying of PVC Insulated PVC Seated /XLPE
power cable of 1.1 kv grade size exceeding
120 SQ. MM but not exceeding 400 SQ. MM
direct in ground in the trench in one horizental
formation including excavation ,sand
coushing protection covering and refilling the
trench etc as required as per direction of
Engg.-in -charge.
Laying of PVC Insulated PVC Seated /XLPE
power cable of 1.1 kv grade size not
459 97 exceeding 25 SQ. MM direct in ground in the Mtr 10.00 49.56 495.60
EXISTING PIPE etc as required as per
direction of Engg.-in -charge.
Laying of PVC Insulated PVC Seated /XLPE
power cable of 1.1 kv grade size exceeding
460 98 25 SQ. MM but not exceeding 400 SQ. MM Mtr 10.00 68.44 684.40
direct in ground in the EXISTING PIPE etc as
required as per direction of Engg.-in -charge.
Laying of PVC Insulated PVC Seated /XLPE
power cable of 1.1 kv grade size not
exceeding 25 SQ. MM in open duct etc as
required as per direction of Engg.-in -charge.
Laying of PVC Insulated PVC Seated /XLPE
power cable of 1.1 kv grade size exceeding
462 100 25 SQ. MM in open duct 400 SQ. MM direct Mtr 10.00 54.28 542.80
in ground in the EXISTING PIPE etc as
required as per direction of Engg.-in -charge.
Laying of PVC Insulated PVC Seated /XLPE
power cable of 1.1 kv grade size not
463 101 exceeding 25 SQ. MM in surface with Mtr 10.00 95.58 955.80
shaddle and screw etc as required as per
direction of Engg.-in -charge.
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Laying of PVC Insulated PVC Seated /XLPE
power cable of 1.1 kv grade size not
464 102 exceeding 120 SQ. MM From 25 SQ. MM in Mtr 19.00 151.04 2,869.76
surface with shaddle and screw etc as
required as per direction of Engg.-in -charge.
Laying of PVC Insulated PVC Seated /XLPE
power cable of 1.1 kv grade size not
465 103 exceeding 400 SQ. MM From 120 SQ. MM Mtr 10.00 154.58 1,545.80
in surface with shaddle and screw etc as
required as per direction of Engg.-in -charge.
Supplying and making end termination with
brass compression gland and aluminium lugs
for following mentioned size cable.as per
direction of Engg.-in-Charge.
Providing,fixing and laying of following dia
G.I. pipe (medium class) in ground complete
471 109 with G.I fitting incl. trenching(75 mm 0 0.00 0.00 0.00
depth)and refilling as per direction of Engg.-in-
Providing,fixing and laying of fallowing dia
HDPE pipe (medium class) in ground
473 111 complete with fitting incl. trenching(75 mm 0 0.00 0.00 0.00
depth)and refilling as per direction of Engg.-in-
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
S/I/T&Commissioning of LT indoor floor
mounted cubical type electrical main panel
(for both light and power circuit) made out by
2mm CRCA steel sheet duly derusted &
painted by simens grey powder cote paint is
designed as G.A drawing. (FOR ALL MAIN
CONNECTED LOAD) BUILDING LIGHT)as
per direction of Engg.-in-Charge. Warrentee
period of replacement of panel & accessories
must be 5 years & compelete test certificate
must be submitted along with panel board
including component list.
In commer- 01 no 63A 4P MCB 10kA,C
series with on/off trip indication Light load for
each floor. ( Make-LEGRAND-Ekinox3 DB/
Siemens-Betaguard/ Schneider- Acti 9/L&T
(Equievalant model)/Panasonic(Equivalant
model) /ABB(Equivalant model)or
equievalant make with proper model ISI
Busbar- 04 numbers of 63Amps,50kA
Electrolytic copper busbar duly sleeved by
color coded PVC sleeve & supported by
suitable size DMC insulator.
Out going- 06 nos 32A 2P MCB 10kA,C
series UPS Light load for each area UBDB. (
Make-LEGRAND-Ekinox3 DB/ Siemens-
Betaguard/ Schneider- Acti 9/L&T
(Equievalant model)/Panasonic(Equivalant
model) /ABB(Equivalant model)or
equievalant make with proper model ISI
Instrument- (i) 03 numbers phase indicating
lamp with toggle switch & HRC fuse.
(ii) 01 set of 0-60Amps Ammeter with
483 121 CTS.(DIGITAL)(Sicure/L&T,CT-KAPPA or 0 0.00 0.00 0.00
equievalant make & model)
(iii) 01 set of 0-500 voltmeter
484 122 .(DIGITAL)(Sicure/L&T or equievalant make 0 0.00 0.00 0.00
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
S/I/T&Commissioning of LT indoor floor
mounted cubical type electrical main panel
(for both light and power circuit) made out by
2mm CRCA steel sheet duly derusted &
painted by simens grey powder cote paint is
designed as G.A drawing. (FOR ALL MAIN
486 124 CONNECTED LOAD) BUILDING Set 1.00 101782.08 1,01,782.08
POWER/AC)as per direction of Engg.-in-
Charge. Warrentee period of replacement of
panel & accessories must be 5 years &
compelete test certificate must be submitted
along with panel board including component
In commer- 01 no 125A 4P MCCB 25kA,
with ROM & S. Link. (make-
487 125 ABB/Siemens/SCHNEIDER/L&T/Legrand, ISI 0 0.00 0.00 0.00
marked)(Icu=100%Ics)with shunt trip.with
axulary for BMS or equievalant make.
Busbar- 04 numbers of 125Amps,50kA
Electrolytic copper busbar duly sleeved by
color coded PVC sleeve & supported by
suitable size DMC insulator.
Out going- 04 nos 63A 4P MCB 10kA,C
series for power BDB. ( Make-LEGRAND-
Ekinox3 DB/ Siemens-Betaguard/ Schneider-
489 127 Acti 9/L&T (Equievalant 0 0.00 0.00 0.00
model)/Panasonic(Equivalant model)
/ABB(Equivalant model)or equievalant make
with proper model ISI marked)
Out going- 02 nos 32A 4P MCB 10kA,C
series forExtra power BDB. ( Make-
LEGRAND-Ekinox3 DB/ Siemens-Betaguard/
490 128 Schneider- Acti 9/L&T (Equievalant 0 0.00 0.00 0.00
model)/Panasonic(Equivalant model)
/ABB(Equivalant model)or equievalant make
with proper model ISI marked)
Instrument- (i) 03 numbers phase indicating
lamp with toggle switch & HRC fuse.
(ii) 01 set of MFM with
492 130 CTS.(DIGITAL)(Sicure/L&T,CT-KAPPA or 0 0.00 0.00 0.00
equievalant make & model)
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supply,Installation,Testing & Commissioning
of 55 INCH (139 cm) ultra HD (4K) LED
smart TV , with launch year must be 2023 ,
inbuilt speaker of minium 40 watt , inbuilt
storage memory of minium 8 GB , support ios
, android , inbuilt wifi , bluetooth connection ,
port for external USB drive .(Make:-SONY
/LG / SAMSUNG )
Supply and fixing of Modular metal box on
surface or in recess with suitable size of
Modular cover in front including providing
and fixing 16Amp socket outlet and 16Amp
Modular switches connection (Make of
Modular Switch- Schineider cripsal x
/panasonic europa /Legrand myrius / L&T
englaze or eq or eq )
Supply and fixing of modular 6Amp plug with
6Amp switch on existing board (Make of
495 133 Modular Switch- Schineider cripsal x Each 6.00 227.74 1,366.44
/panasonic europa /Legrand myrius / L&T
Recessed wiring to submain in the following
sq.mm FRLS PVC insulated single core
multistrand copper conductor of ISI marked
conforming to IS-694/1990 in the following
dia non-metallic heavy duty flexible conduit
496 134 1.6 mm thick along with the following sq.mm 0 0.00 0.00 0.00
FRLS PVC insulated single core multistrand
copper conductor as earth wire as
required.(Make of wire-Finolex /L&T / Havells
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supply, Installation, Testing and
Commissioning of 82.5 KVA, 415 Volts (3
comprising of Cummins make Engine &
Stamford Alternator and AMF Control Panel
as per GeM Specification, 2 years or 5000
498 136 hours comprehensive warranty on the entire Each 1.00 1085800.60 10,85,800.60
DG Set and 3 years additional warranty on
critical components of the engine i.e. Cylinder
Block, Cylinder Head, Crankshaft, Camshaft,
Connecting rod from the date of
Supplying fitting and fixing of Steel Site Map
and Sinage at Gunpur incluiding cost of all
accessories, materials, labours & T&P
etc.complete excluding GST.
Supplying fitting and fixing of Name plate at
sdh Gunpur incluiding cost of all accessories,
materials, labours & T&P etc.complete
Supply,Installation,Testing & Commissioning
of 7 Mtr long Galvanized PU painted
octagonal pole with solar pannel of 150 watt /
165 watt / 12 v poly (make - luminous ) with
suitable angel pannel holder and bracket on
top of pole with 60 watt solar LED light ( 2 IN
1) battery inbuilt in light , fully concrete
foundation base with stell rods of jindal , 8
SWG aluminium wire for earthing of pole
,with all other wiring material ( 3 core 4 sq
mm flexible copper DC cable 5 mtr ) ,MC 4
Connector , Pole Thickness-3.1mm with
foundation nuts and bolts and bracket of
suitable for holding 1 No of 60 Watt LED DC
light (2 in 1) . pole Make (Bajaj or
equivalent of Klite/Valmount) with 60 W LED
solar DC light with( 2 in 1) and battery in
built .(Make:-Bajaj / Philips/panasonic )
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying, Erection, Fixing, connection &
testing of LED BOUNDRY WALL Light of
elegant look Panasonic/philips/wiproor
equievalant reputed make & model A
catogory, ISI marked as approved 35 W LED
street light having die cast aluminium housing
with toughened glass having lumen efficacy
of 110 lm/w or more (As per LM 79 report of
502 140 third party NABL lab) ,IP 65 protection or Sets 20.00 3779.54 75,590.80
more , LED street light model will be vide
Panasonic / Philips/LT/WIPRO make or
equievalant reputed make A catagory ISI
marked as approved having warrantied for a
period of 5 years . The luminaire should be
supplied along with bracket maintenance
free for inspection as required as per
direction of Engg.-in-Charge.
Supplying, Erection, Fixing, connection &
testing of Panasonic 40 LED GATE Light of
Panasonic / Philips/LT/WIPRO or
equievalant reputed make A catagory ISI
marked as approved maintenance free
having 2 years warranty G.I P ipe with
braket including MCB box & including with
foundation as per the Drawing for inspection
as required & as per direction of Engg.-in-
Supply of materials and installation of pipe
earth electrode made out of 50mm dia class
B G.I. pipe of 3.0 metre long with
arrangements for fitting/ termination of G.I.
flat / wire with G. I. nut bolts & washers
including cost of burnt wood charcoal, salt,
504 142 foreign soil, water pouring arrangements, Nos 4.00 2954.72 11,818.88
brick masonary enclosure on top with
removable RCC cover complete with labour
for excavation of pit in all kinds of soil & rock
as required and as per direction of Engineer-
in-charge.The entire earthing system should
be Replacement Warranty will be 5 years
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Providing and fixing 4 mm dia copper wire on
505 143 surface or in recess for loop earthing as Mtr 200.00 113.28 22,656.00
required as per direction of Engg.-in-Charge.
Providing and fixing 25mm x 5 mm copper
strip on surface or in recess for connections
etc. as required as per direction of Engg.-in-
S/I/T&Commissioning of LT OUT DOOR
FLOOR mounted cubical type MCB
ENCLOSURE made out by 2mm CRCA
steel sheet duly derusted & pented by simens
gray powder cote paint is designed as G.A
drawing. (FOR USE) with 20A TPN MCB 01
507 145 NOLegrand/Schneider/L&T/ABB or Set 1.00 2411.92 2,411.92
equievalant make & model as per direction of
Engg.-in-Charge. Ncessary test report &
Warrnaty certificate to be submitted to the
department for genuinity of product & to avail
free after sales service within warranty period
2 years of acceptance of materials
Supplying,laying of 3cx2.5 sq.mm copper
flexible cable with insulated cover of reputed
make,ISI marked with all other concerned
materials as per direction of Engg.-in-Charge.
508 146 Ncessary test report & Warrnaty certificate to Mtrs 200.00 125.08 25,016.00
be submitted to the department for genuinity
of product & to avail free after sales service
within warranty period for acceptance of
509 147 Sub-Total of Electrical Works 0 0.00 0.00 44,23,970.57
510 0 Firefighting Works 0 0.00 0.00 0.00
Supplying fitting and fixing of furniture
511 1 Godrej make incluiding all cost etc 0 0.00 0.00 0.00
Godrej Matrix 3 Seater Common Arm Public
513 3 Godrej Recliner Rhine V2 Nos 10.00 25128.10 2,51,281.00
Supplying fitting and fixing of UPVC window
with mosquito net sliding type of approved
quality including all etc required to complete
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying all materials, labour, T&P and
providing fitting and fixing (Aqua guard) pure
chill 80 PSS UV of size 750 x 570 x 1350mm
hight with water storage capacity 80 liter's
along with 2 noa of faucets 1 for cold water
and 1 for normal water including a flow of 1.5
ltr per munite etc all complete as per
approved drawing , specification and
direction of the Engineer in chargeAqua
guard pure Chill 80 PSS UV
Touch screen based token dispenser - upto
Token calling unit with LCD display -
517 7 keys'PREV' and 'NEXT', one 'CALL' key, one Nos 3.00 14720.50 44,161.50
'RETAIN' key and a 'CLOSE' key
Token hub - 20 ports for Conneting All
Token display unit- single line ; 6 digits; 4
digit for token no, 2 digits for counter no
TV interface unit ( model name :
521 11 32 inch LCD screen for waiting hall Nos 1.00 21830.00 21,830.00
522 12 HDMI cable 2 metres Nos 1.00 1770.00 1,770.00
Supply of D-Link CAT6 cable and PVC
524 14 Installation testing and commissioning 0 1.00 23600.00 23,600.00
Suplying fitting, fixing up window ( Sliding
type ) made up aluminium section 9778 as
windows frame section No. 4096, 9777 and
3994 as shutter frame with 5mm thick black
525 15 glass as panel fitted with rubber beading Sqm 4.90 4396.75 21,544.08
including locking arrangement including all
fitting ,cost of all materials, taxes, labour, T&P
etc. complete as per direction of Engineer in
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Providing, fitting, fixing up partition walling
OEL aluminium anodized section No. 9210
and 9207 as single groove and double
groove respectively as horizontal and vertical
member and OEL section 4660 as Tapered
clip for fixing up 12mm thick pre laminated
board and jointing angle No. 1855 including
all fitting ,cost of all materials, taxes, labour,
T&P etc. complete as per direction of
Engineer in Charge.
Providing fitting & fixing of false celling with
aluminium anodised T section No.3215 with2'-
0" center to center, L section No.1705 upto
15 micron on 4 walls to be plug & the
Aluminium grid 2'-0"x2'-0" with hard board
suspended from ceilling etc. complete.
Earthwork in excavation in hard soil for site
leveling, foundation, pits, trenches and other
civil works upto and including 1.5metre lift
and stacking the soil upto a lead of 100 metre
and including dewatering, removing slush,
shoring and strutting (as required), complete
as per specification and as directed by the
Engineer-In-Charge. Hard soils.
Filling in foundation trenches and plinth, with
well gravelled sand including laying the earth
in layers not exceeding 23.5 cm thick
ramming & watering with all leads & lifts
including cost of all labour,T&P completed as
directed by the Engineer-in-charge.
Providing and laying plain cement concrete
1:4:8 (1 cement : 4 sand : 8 stone agregate
530 20 40mm nominal size) as levelling course in Cum 3.30 5388.12 17,787.33
floor and plinth including tempering, curring,
shuttering etc. complete all depth and height.
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Fly Ash. brick masonry of size 25 cm. x 12
cm. x 8 cm. having crushing strength not less
than 75 kg. Per Sqr. Cm. in cement mortar of
mix (1:6) with approved grade cement and
screened & washed sand for mortar after
immersing the bricks for 6 (Six) hours in
water before use in Superstructure including
531 21 splays cutting, circular moulding, corbelling, Cum 6.39 6267.33 40,028.21
chamfering and similar such type of works,
watering and curing etc. including cost,
conveyance, loading, unloading, royalties and
taxes of all materials, cost of all labour,
scaffolding, sundries, T&P required for the
works etc. complete in all respect as directed
by the Engineer-in-charge, Ground floor
12mm cement plaster to out side of brick
surfaces with cement mortar of mix 1:6 (1
532 22 cement : 6 fine sand) including necessary Sqm 26.67 172.63 4,604.15
scaffolding, curing etc. all complete at all
floors and all heights.
16mm cement plaster to inside of brick
surfaces with cement mortar of mix 1:6 (1
533 23 cement : 6 fine sand) including necessary Sqm 21.28 247.68 5,270.67
scaffolding, curing etc. all complete at all
floors and all heights.
Painting two coats with approved anti-fungal
weather seal paints (ISI) of approved colour,
shade on wall surface over a coat of wall
primer(ISI) water bound including sand
534 24 papering, polishing the surface, cost, Sqm 26.67 100.30 2,675.00
conveyances of all materials and cost of all
labour,labour cess with T&P etc, complete as
per specification & direction of Engineer-in-
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Priming one coat with wall cement primer
(water bound) to make an even finished
surface in all floors and heights to wall
surface of approved make and shade
including sand papering, applying putty
wherever necessary & cost of scaffolding,
staging charges with cost, conveyance, taxes
of all materials, cost of all labour,labour cess
T&P etc. complete as per the direction of the
Engineer-in-charge.
Painting two coats with approved plastic
emulsion paint over a coat of wall primer of
make Dulux / Berger / Asian to inside surface
of walls finished with Acrylic Wall putty
(water based) of make (Birla / JK) and
finished smooth & even surface to receive
painting using roller to the final coat including
cost of scaffolding staging charges with cost,
conveyances, taxes of all materials, cost of
labour, T&P required for the work etc.
complete for all floors as per specification &
direction of the Engineer-in-charge.
Note :- Sample of Paint & Primer shall be
approved before procurement and use.
Supplying and Fixing of M.S. Grills,
M.S.Doors, M.S. Gate etc including
537 27 cost,conveyance of all materials,priming,and Kg 2000.00 111.86 2,23,728.00
labour for fitting fixing etc.complete as per the
instruction of Engineer-in-Charge
Painting two coats with approved Enamel
Paint on Steel work in Ground Floor
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Providing and fixing precoated galvanised
iron profile sheets (size, shape and pitch of
corrugation as approved by Engineer-in-
charge) 0.50 mm (+ 0.05 %) total coated
thickness with zinc coating 120 grams per
sqm as per IS: 277, in 240 mpa steel grade, 5-
7 microns epoxy primer on both side of the
sheet and polyester top coat 15-18 microns.
Sheet should have protective guard film of 25
539 29 microns minimum to avoid scratches during Sqm 262.91 792.43 2,08,337.51
transportation and should be supplied in
single length upto 12 metre or as desired by
Engineer in-charge. The sheet shall be fixed
using self drilling /self tapping screws of size
(5.5x 55 mm) with EPDM seal, complete upto
any pitch in horizontal/ vertical or curved
surfaces, excluding the cost of purlins, rafters
and trusses and including cutting to size and
shape wherever required
Providing and fixing precoated galvanised
steel sheet roofing accessories 0.50 mm
(+0.05 %) total coated thickness, Zinc coating
120 grams per sqm as per IS: 277, in 240
540 30 mpa steel grade, 5-7 microns epoxy primer Meter 100.00 531.71 53,170.80
on both side of the sheet and polyester top
coat 15-18 microns using self drilling/ self
tapping screws complete :, Ridges plain (500 -
Extra for providing and fixing wind ties of 40x
6 mm flat iron section.
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying and installing uPVC- Casement
openable doors made out of lead free green
profiles of KÖMMERLING make with a
GREENLINE mark with frame dimension of
58mm x 69mm x 50mm for doors and sash
dimension of sash dimension of 58mm x
93mm x 54mm for doors with corners fusion
welded, fully reinforced with Galvanized steel
of 1.2 mm to 2 mm. The sash will be fitted
with 6mm clear glass (toughened). The
physical properties of the profiles like Vicat
softening temperature, density, tensile
strength, hardness, weatherability, impact
542 32 strength and Modulus of Elasticity should be Sqm 4.90 15236.16 74,657.18
tested in accordance with ASTM/DIN-ISO
standards and the thermal conductivity as per
IS standards. The profile manufacturer
should be a certified member of IGBC and
should have extrusion facility in India and the
windows to be assembled and installed by an
authorised fabrication partner . The windows
must be installed complete with all kinds of
ironmongery (including EPDM
gaskets,bridging wedges and glass packers)
and with suitable water draining system.
Application of Silicon sealant from Inside /
Outside of Dowcorning / GE or equivalent.
Providing & fixing of Factory fabricated
WINPLUS® Aluminium door Systems - For
sliding door, made from 6063 alloy and T-6
tempered aluminium profile, in approved
shade of hybrid /purepolyster surface coating
(50-60micron Powder Coat), mechanically
mitred & jointed with casted / aluminium
extruded corner cleats along with Sliding
window Flush Lock, Bearing Rollers ,
Siliconised Weather strip and 5mm ET 125
toughened glassas infill shall be fitted into
Shutter using siliconised microwave treated
EPDM gaskets excluding taxes of all
materials and cost of all labours required for
the work etc. complete in all respect as
desired by the Engineer in charge.
Earth Work in excavation of foundation in
hard soil within initial leads of 50m & lifts of
1.5m including dressing and levelling of bed
etc. and adding contractor's profit and over
head charges, etc. complete in all
respect.MAIN WALL
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying & filling of foundation with course
sand well watered and rammed including
545 35 cost, cost of all labour, carriage, royalty Cum 4.56 527.70 2,406.29
complete in all respect. (As Per A/R Page No-
1, Item No-2) MAIN WALL
Cement Concrete (1:4:8) using 40mm size
hard granite C.B. metal approved quality from
546 36 approved quarry including cost, carriage, Cum 9.57 5388.12 51,564.27
royalty, cost of all labour. etc complete and as
directed by E.I.C.MAIN WALL
R.C.C. M-25 grade with 20mm and down
grade C.B. chips of approved quality from
approved quarry including hoisting, laying
547 37 hire charges of concrete mixture, vibrator, 0 0.00 0.00 0.00
watering, curing and cost of all materials and
labour, centering shuttering etc complete but
excluding cost of reinforcement.
Straightening, cutting, bending bent up or
coiled rods, including cranking, hooking,
welding or jointing the M.S. rods or tor
confirming to I.S. 432 (Plain) and 1785 (Tor)
steel and binding, tying the grills, hoisting,
lowering and placing in proper position
required for R.C.C. works including cost,
conveyance and taxes of M.S. rods or tor
steel and binding wires of 18 to 20 gauge and
cost of all labour etc.complete in all respect.
Fly Ash Brick work with Fly Ash Bricks of
25cm.x 11cm.x 8cm. size having crushing
strength not less than 75 Kg/Cm2 in cement
556 46 FOOTING BELOW GL Cum 5.40 6267.33 33,843.60
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Fly Ash Brick work with Fly Ash Bricks of
25cm.x 11cm.x 8cm. size having crushing
strength not less than 75 Kg/Cm2 in cement
mortar (1:6) in superstructure including
splays, cuttings, circular moldings, watering &
curing for 7 days, cost, conveyance, taxes &
royalties of all materials, labour with T&P etc.
complete in all respect.
12mm thick C.P.(1:6) on brick masonary to
the smooth surface including watering,
559 49 curing, cost, carriage, royalty of all materials, Sqm 152.40 172.63 26,309.42
cost of all labour, etc complete as per the
direction of E.I.C.
16mm thick C.P. (1:6) over brick masonary to
the smooth surface including watering, curing
560 50 cost, carriage, royalty, and taxes of all Sqm 121.60 247.68 30,118.13
materials, cost of all labour, etc complete as
per the direction of E.I.C. STAIR CASE
Supplying, fitting & fixing of 10 mm thick &
size of 600x600 mm Vitrified floor tiles
(GVT) of matt finish(WOODEN
FINISH/RUSTIC FINISH) with veilcraft (VC )
shield( Scratch free/stain free) with water
absorption limit between 0.08% to 3% and
conforming to IS : 15622:2006 (Group B Ib)
laid on 20 mm thick cement mortar (1:4) and
filling joints with white cement of approved
quality including cost of all materials, etc.
required for the work all complete as per
direction of E.I.C. HALL
Priming 1 coat with wall primer water bond
562 52 cement primer including all labour, materials Sqm 274.00 80.12 21,953.43
etc. complete.12 mm Cp, 16 mm Cp
Finishing wall surface with Cement based
wall putty (water based) of approved make
and finished smooth & even surface to
receive painting including cost of scaffolding
etc. with cost of all materials, labour etc.
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Wall painting 2 coats with plastic emulsion
paint of approved shade on new work to give
an even shade including cost of paint etc
Wall painting two coat with any approved
weather coat paint including cost of all
materials, labour and T&P require for the
work etc. complete as directed by the E.I.C.
Supplying of M.S. Door, Window with grills,
Grills made out of M.S. Angle frame, M.S.
Flat, Sheet etc of approved section & design,
electrically welded properly with all necessary
locking arrengement, and 1 coat red oxide
primer including cost of all materials, labour
charges, carriage of materials to site etc.
Suplying fitting, fixing up window ( Sliding
type ) made up aluminium section 9778 as
windows frame section No. 4096, 9777 and
3994 as shutter frame with 5mm thick black
567 57 glass as panel fitted with rubber beading Sqm 8.22 4440.91 36,504.25
including locking arrangement including all
fitting ,cost of all materials, taxes, labour, T&P
etc. complete as per direction of Engineer in
Providing fitting fixing of alluminium door with
OEL Al. secn of 9202 as vertical member
9200 as top and buttom 9232 as midd;e
member and 12mm thick prelamilate board
Providing, fitting, fixing up partition walling
OEL aluminium anodized section No. 9210
and 9207 as single groove and double
groove respectively as horizontal and vertical
member and OEL section 4660 as Tapered
clip for fixing up 12mm thick pre laminated
board and jointing angle No. 1855 including
all fitting ,cost of all materials, taxes, labour,
T&P etc. complete as per direction of
Engineer in Charge.
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Priming one coat with any approved primer
including cost of primmer & labour to give an
even shade excluding cost of primer. (As per
A.R. 93/1) for MS grill
Painting two coats with approved enamel
paints of approved colour, shade over a coat
of primer including sand papering, polishing
the surface, cost, conveyances of all
materials and cost of all labour etc, complete
as per specification & direction of E.I.C.
labour for fixing big six or trafford G.C I sheet
in roof including fixing of ridges wind ties etc.
572 62 complete but excluding cost of fitting Sqm 244.14 906.21 2,21,242.93
including drilling the holes in wind ties per 1
Labour for fixing and fitting colour G.C I sheet
or vallys (double) 1 Rm
Providing fitting & fixing of false celling with
aluminium anodised T section No.3215 with2'-
0" center to center, L section No.1705 upto
15 micron on 4 walls to be plug & the
Aluminium grid 2'-0"x2'-0" with hard board
suspended from ceilling etc. complete.
Earthwork in excavation in hard soil for site
leveling, foundation, pits, trenches and other
civil works upto and including 1.5metre lift
and stacking the soil upto a lead of 100 metre
and including dewatering, removing slush,
shoring and strutting (as required), complete
as per specification and as directed by the
Engineer-In-Charge.
Filling in foundation trenches and plinth, with
well gravelled sand including laying the earth
in layers not exceeding 23.5 cm thick
ramming & watering with all leads & lifts
including cost of all labour,T&P completed as
directed by the Engineer-in-charge.
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Providing and laying plain cement concrete
1:4:8 (1 cement : 4 sand : 8 stone agregate
579 69 40mm nominal size) as levelling course in Cum 3.30 5388.12 17,787.33
floor and plinth including tempering, curring,
shuttering etc. complete all depth and height.
Fly Ash. brick masonry of size 25 cm. x 12
cm. x 8 cm. having crushing strength not less
than 75 kg. Per Sqr. Cm. in cement mortar of
mix (1:6) with approved grade cement and
screened & washed sand for mortar after
immersing the bricks for 6 (Six) hours in
water before use in Superstructure including
580 70 splays cutting, circular moulding, corbelling, 0 0.00 0.00 0.00
chamfering and similar such type of works,
watering and curing etc. including cost,
conveyance, loading, unloading, royalties and
taxes of all materials, cost of all labour,
scaffolding, sundries, T&P required for the
works etc. complete in all respect as directed
by the Engineer-in-charge
12mm cement plaster to out side of brick
surfaces with cement mortar of mix 1:6 (1
582 72 cement : 6 fine sand) including necessary Sqm 26.67 172.63 4,604.15
scaffolding, curing etc. all complete at all
floors and all heights.
16mm cement plaster to inside of brick
surfaces with cement mortar of mix 1:6 (1
583 73 cement : 6 fine sand) including necessary Sqm 21.28 247.68 5,270.67
scaffolding, curing etc. all complete at all
floors and all heights.
Painting two coats with approved anti-fungal
weather seal paints (ISI) of approved colour,
shade on wall surface over a coat of wall
primer(ISI) water bound including sand
584 74 papering, polishing the surface, cost, Sqm 26.67 100.30 2,675.00
conveyances of all materials and cost of all
labour,labour cess with T&P etc, complete as
per specification & direction of Engineer-in-
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Priming one coat with wall cement primer
(water bound) to make an even finished
surface in all floors and heights to wall
surface of approved make and shade
including sand papering, applying putty
wherever necessary & cost of scaffolding,
staging charges with cost, conveyance, taxes
of all materials, cost of all labour,labour cess
T&P etc. complete as per the direction of the
Engineer-in-charge.
Painting two coats with approved plastic
emulsion paint over a coat of wall primer of
make Dulux / Berger / Asian to inside surface
of walls finished with Acrylic Wall putty
(water based) of make (Birla / JK) and
finished smooth & even surface to receive
painting using roller to the final coat including
cost of scaffolding staging charges with cost,
conveyances, taxes of all materials, cost of
labour, T&P required for the work etc.
complete for all floors as per specification &
direction of the Engineer-in-charge.
Note :- Sample of Paint & Primer shall be
approved before procurement and use.
Providing corrugated G.S. sheet roofing
including vertical / curved surface fixed with
polymer coated J or L hooks, bolts and nuts 8
mm diameter with bitumen and G.I. limpet
washers or with G.I. limpet washers filled with
white lead, including a coat of approved steel
primer and two coats of approved paint on
overlapping of sheets complete (up to any
pitch in horizontal/ vertical or curved
surfaces), excluding the cost of purlins,
rafters and trusses and including cutting to
size and shape wherever required
0.80 mm thick with zinc coating not less than
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Providing and fixing 15 cm wide, 45 cm
overall semi-circular plain G.S. sheet gutter
with iron brackets 40x3mm size, bolts, nuts
and washers etc., including making
necessary connections with rain water pipes
0.80 mm thick with zinc coating not less than
Extra for providing and fixing wind ties of 40x
6 mm flat iron section.
Supplying fitting and fixing of LED Letter
Board at GUNPUR incluiding cost of all
accessories, materials, labours & T&P
etc.complete excluding GST.
593 83 LED Letter SDH GUNPUR(Odia & English) Sq.In 996.00 318.60 3,17,325.60
LED Letter SUB DIVISIONAL HOSPITAL
GUNPUR (Odia & English)
LED Letter ATTENDANT REST SHED,
GUNPUR (Odia & English)
596 86 Master Plan of facilities 0 1.00 236000.00 2,36,000.00
597 0 Sub-Total of Firefighting Works 0 0.00 0.00 79,76,818.40
598 Grand Total 3,46,16,818.11
598 Grand Total 3,46,16,818.11
Digitally signed by Rakesh
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
5 NIT.pdf
Tender Document
3a GCC Contracting with Ammendment 4.pdf
Tender Document
11 BOQ RAY 001 AMA.pdf
Tender Document
3b SCC.pdf
Tender Document
14 Scope of Work.pdf
Tender Document
8 Milestone - Repair Renovation.pdf
Tender Document
13 List of Approved Makes NHM Project Odisha.pdf
Tender Document
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .