Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹18.0 LAccepted-AOC | L1 | Accepted-AOC Lowest bidder | |
| 2 | L2₹18.4 L+₹39,885.30 (2.22%)Rejected-Finance | L2 | Rejected-Finance Not lowest bidder | |
| 3 | L3₹18.6 L+₹68,060.80 (3.79%)Rejected-Finance | L3 | Rejected-Finance Not lowest bidder | |
| 4 | L4₹19.9 L+₹1.9 L (10.8%)Rejected-Finance | L4 | Rejected-Finance Not lowest bidder | |
| 5 | L5₹20.2 L+₹2.2 L (12.4%)Rejected-Finance | L5 | Rejected-Finance Not lowest bidder |
Tender Value
₹23.9 L
EMD Value
₹47,900
Closing Date
21 Jul 2022, 6:00 pmClosed
Garrison Engineer Dronachal
GE Dronachal, Dronachal Top, Neori Hills, Bhopal 462038
PROVN OF PARKING SHED HARDSTANDING AND ALLIED WORKS AT AYODHYA NAGAR (TECH SITE) AT DSCC BHOPAL
2022_MES_530698_1
8698/E8
Open Tender
Civil Works
Item Rate
180 days
Bhopal
Class-E, Category a (i) and as per NIT documents
6 documents required · 6 mandatory
₹500
Garrison Engineer Dronachal
₹47,900
Yes
6 Oct 2022
14 Jun 2022
23 Jul 2022
14 Jun 2022
21 Jul 2022
28 Jun 2022
Amount
Excavating in trenchs, n exc 1.5m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10sq m on plan and n exc 1.5m in depth and getting out soft / loose soil complete all as specified and directed.
Surface excavation n.exc 30cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and directed.
Excavation over area n.exc. 1.5 m deep in soft/ loose soil and getting out complete all as specified and directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm. soft / disintergrated rock complete all as specified and directed.
Removing excavated material exc.250m but not exc 500 m & depositing where directed at a level not exc. 1.5m above the starting point complete all as specified and directed.
M&L for PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in foundations, filling and mass concrete etc complete all as specified and directed.
M&L for Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.
M&L for earth filling/moorum filling in subgrade, sub base using earth brought from outside MD land including raising (or lowering) earth, spreading in layers not exceeding 30 cm thick, watering ramming/ rolling and finishing to required size, shape, etc. not exceeding 1.5m high from base complete all as specififed and directed.
M&L cement concrete type B0 (1:2:4) using 12.5 mm graded aggregate 40 mm thick as in floor for receiving screed bed complete all as specified and directed
M&L brickwork with flyash modular size bricks built in CM 1:6 straight or curved on plan exe 6 m mean radious complete all as specified and directed.
M&L, for rendering 10mm thick on fair faces of brick work or on concrete surfaces in CM (1:4) external surface finished even and smooth without using extra cement all as specified.
M&L for Preparing of new plaster surface and applying three coat of white wash on newly plaster surface of wall complete all as specified and directed
M&L for RCC work design mix M-25 using 20 mm graded stone aggregate as in foundations, including rafts, footing foundation beams, plinth beam, base for coulm, etc basement slab under ream piles and mass concrete complete all as specified and directed.
M&L for RCC work design mix M-25 using 20 mm graded stone aggregate as in Col, Pillars post and struts etc complete all as specified and directed.
M&L for RCC work design mix M-25 using 20 mm graded stone aggregate as in beams, cantilever, bressummers, lintel over 1.5m span etc complete all as specified and directed.
M&L for RCC work design mix M-25 using 20 mm graded stone aggregate as on Slabs supported on walls, beams and columns in floors, roofs, landings, blaconies, canopies, deck slabs andd in shelves and the like complete all as specified and directed.
Use and waste of formwork to sides of concrete foundation ,footing,base of column ,raft beams , sides and soffits (if any) of foundation and plinth beams and similar work vertical or to batter to rough finish surface of concrete flat complete all as specified and directed.
Use and waste of formwork to soffits of suspended slabs such as roof slabs ,floor slabs ,landing and similar work not exc 200mm thick (Horizontal or sloping) to rough finish surface of concrete flat complete all as specified and directed.
Use and waste of formwork to soffits of floor or roof beams, beam haunching ,grider, bressumber, lintels,cantilever ,sleves including supports ,over hang etc also splay between floor and beams to rough finish surface of concrete flat complete all as specified and directed
Use and waste of formwork to sides of pillars, posts ,struts piers ,columns and stanchion circular on plan to rough finish surface of concrete square ,rectangular or polygonal. complete all as specified and directed
Use and waste of formwork to edges of concrete flats, treads, break in floors window cills, concrete railing , opening in concrete wall, floor and roofs n exc 20cm wide and sides of RCC/PCC bands in walls , horizontal or sloping and similar work exc 10 cm but n exc 20 cm wide to rough finish surface of concrete flat. complete all as specified and directed
M&L TMT mild steel bars 10mm dia and over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with theincluding mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality conforming to complete all as specified and directed
Ditto as item No. 22 but 8mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed
M&L Rendering 15 mm thick cement plaster in CM 1:6 on fair faces of brick/concrete work surfaces complete all as specified and directed
M&L rendering 5 mm tk on fair faces of concrete surface in ceiling in cement mortar 1:4 complete all as specified and directed
M&L for providing 75 mm thick PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate ) as in sub base of flooring complete all as directed.
M&L 75mm PCC 1:3:6 type C2 using 40mm graded stone aggregate as in plinth protection and hard standing complete all as specified and directed
M&L forming construction joint 30mm deep X 10mm wide with sealing compound grade A complete all as specified and directed
M&L cement concrete type B0 (1:2:4) using 12.5 mm graded aggregate 25 mm thick as in floor for receiving screed bed complete all as specified and directed
M&L for Light shade vitrified ceramic tiles 10 mm thick (square/rectangular) polished,area of each tiles not exceding 0.36 Sqm in floors etc set and jointed in cement slurry and pointed in white or coloured cement to match and laid over 15 mm thick screed bed in cement mortar 1:6 complete all as specified.
All as per item No 30 above but on vertical surface as in dado/ skirting complete all as specified.
M&L for Preparing of new plaster surface and applying three coat of white wash on newly plaster surface of ceiling including 3mm thick wall care putty complete all as specified and directed.
M&L, for finishing walls with Acrylic Smooth exterior paint of required shade, New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) and providing and applying plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth complete all as specified and directed.
M&L Boring holes of 200mm dia 2 m deep in soil for under-reamed piles and getting out and disposal of spoil to a distance of n exc. 50 m complete all as specified and directed
M&L for Reinforced cement concrete (nominal mix) Type B1 1:2:4 (20 mm graded stone aggregate) in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.
S&F in Steel work in tubular trusses including special shaped washer, required nuts and bolts fixtures etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified and directed
S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick (plain or curved) of any colour having tensile strength of 550 Mpa as in roof covering, fixed with self tapping screws, rivetting, welding etc complete all as specified and directed.
S&F Plates (plain or chequered)channels, square cut or notched(ordinary and counter sunk) forming holes, with bolting, rivetting attachment Fe 410-W(Gde-E- 250) quality-A complete all as specified and directed.
S&F for Mild steel screw bolts (machine made) 16 to 20 mm dia of neck with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm but n exc 10 cm long complete all as specified and directed.
Ditto, as item No. 39 but length of bolt exc 22.5cm and n exc 30cm long complete all as specified and directed.
M&L fly ash brick wk with sub class B brick straight or curved on plan exe 6 m mean radious built in C/M 1:6 complete all as specified and directed.
M&L, for rendering 15mm thick on fair faces of brick work or on concrete surfaces in CM (1:4) external surface finished even and smooth without using extra cement complete all as specified and directed.
M&L for preparation of new plaster surfaces of walland applying two coat of cement base paint over one coat of cement base primer complete all speciified and directed
M&L, two coats of synthetic enamelled paint over a coat of red oxide primer including preparation of new steel/iron surfaces exceeding 10cm width or girth complete all speciified and directed
M&L 100mm thick PCC(1:4:8) type D-2 using 40mm graded stone aggregate as in sub base of floor complete all as specified and directed.
M&L for laying of Sand in base for cushion of PCC inter locking blocks complete all as specified and directed.
M&L for factory made Machine pressed precast 80mm thick coloured chemically treated PCC inter locking blocks (ISI Marked ) M-35 grade as desgin & pattern approved by GE as in Veh parking and filling of joints with Narmada fine sand complete all as specified and directed.
M&L PCC 1:2:4 type B1 (using 20mm graded stone aggregate) in roof kerbs or mud stops, rounded or chamfered on edges in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs, mass filling/ levelling coarse as it bedding coarse and the like including weathering, slightly rounded or chamfered angles and throating, as directed complete all as specified and directed.
Samaksh Enterprises
deepak mehra & associates
Vee kay construction
MANORAMA CONSTRUCTION
CREATIVE CONSTRUCTION
M/s H V Infra Projects
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .