Lighting arrangement one newly build Temple near Dhori (E)Sub-station under CCD, G.M. unit, Dhori Area under approved capital budget 2024-25.

Amount

Supply of Octagonal pole 8 mtr. long.

Erection of Octagonal pole strut concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and re-filling and secured with holding clamps, bolts, nuts, etc. as required.

Supplying and fixing of 32mm dia x 2.00 metres long G.I. pipe (medium class) bracket for mounting of fluorescent/HPMV/HPSV street light fitting on pole including bending the pipe to the required shape, 2 nos. 40mm x 3mm flat iron clamps with nuts, bolts and washer, painting the flat iron with primer and finish paint etc. as required.

Supplying of channel iron 75 mm x 40 mm x 6 mm (7.14 kg per metre) cross arm for 2 wire over head line complete with clamps, bolts, nuts and washer etc including drilling of holes for insulator pins etc (as per drawing) and painting with and finished paint as required.

Erection of angle iron/ channel iron cross arm on wood/RCC/PCC/ steel tubular/ rail pole etc. as required.

Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size in phenolic laminated sheet cover in front including painting etc required. : 150 mm x 75 mm x 60 mm deep.

Supply of 35 sqmm 2 core aluminium cable ISI mark.

Supplying and drawing following sizes FRLS PVC insulated copper conductor, single core cable in existing surface/ recessed steel/ PVC conduit as required. : 2 x 1.5 sq.mm

Fixing of LED light at top of the pole.

Laying of one number PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and re-filling the trench etc. as required. : upto 35sq.mm

Supplying and fixing of following sizes of medium class PVC conduit, along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required. : 50 mm

Supply and fixing of timer switch.

Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required. 100 Amp TP&N.

Supply and fixing of Anti climbing device.

Clamp with nut and bolts.

Transportation of pole.

Supply and fixing of Rope light.

Total impact of GST for the purpose of CTC

M/S SHIV PARBATI ENTERPRISES (BID ID -1132661)

M/S KUMAR ENTERPRISES (BID ID -1132713)