Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | H1₹3.1 CrAccepted-AOC | ₹3.1 Cr | H1 | Accepted-AOC Being H1 in QCBS system. |
| 2 | H2₹2.8 Cr−₹30.0 L (9.53%)Rejected-Finance 464 465 SURESH NAGAR THATIPUR GWALIOR MADHYA PRADESH 474011 | GWALIOR | MADHYA PRADESH | 474011 | ₹2.8 Cr−₹30.0 L (9.53%) | H2 | Rejected-Finance Not qualified for AOC |
| 3 | H3₹3.0 Cr−₹11.2 L (3.55%)Rejected-Finance | ₹3.0 Cr−₹11.2 L (3.55%) | H3 | Rejected-Finance Not qualified for AOC |
| 4 | H4₹2.8 Cr−₹35.4 L (11.2%)Rejected-Finance | ₹2.8 Cr−₹35.4 L (11.2%) | H4 | Rejected-Finance Not qualified for AOC |
| 5 | H5₹3.2 Cr+₹3.5 L (1.11%)Rejected-Finance | ₹3.2 Cr+₹3.5 L (1.11%) | H5 | Rejected-Finance Not qualified for AOC |
| Sl No | Description | Qty | Unit | Technocrats Construction Co. L5 | LUXMI ENGINEERS L1 | MDP INFRA INDIA PVT LTD L2 | SHUBH ENGINEERS L7 | ICC INFRA PROJECT INDIA PVT LTD L6 | MRIG CONSTRUCTIONS L3 | Eternal Infraheight Pvt Ltd L4 |
|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, etc. complete job as per the requirement of the site and the direction of the Engineer-in-Charge. | 164 | Cum | 175 ₹28,700 Lowest | 350 ₹57,400 | 200 ₹32,800 | 500 ₹82,000 | 500 ₹82,000 | 380.52 ₹62,405.28 | 409 ₹67,076 |
| 2.00 | Centering and shuttering including strutting, propping etc. and removal of form work for : Foundations, footings, bases for columns etc. complete job as per the requirement of the site and the direction of the Engineer-in-Charge | 1,458 | Sqm | 290 ₹4,22,820 Lowest | 450 ₹6,56,100 | 400 ₹5,83,200 | 800 ₹11,66,400 | 650 ₹9,47,700 | 299.1 ₹4,36,087.8 | 609 ₹8,87,922 |
| 3.00 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:1.5:3 (1 Cement: 1.5 coarse sand (zone-lll) derived
from natural sources : 3 graded stone aggregate 20 mm
nominal size derived from natural sources) etc. complete job as per the requirement of the site and the direction of the Engineer-in-Charge | 164 | Cum | 7,500 ₹12,30,000 | 4,500 ₹7,38,000 Lowest | 6,300 ₹10,33,200 | 7,500 ₹12,30,000 | 9,000 ₹14,76,000 | 6,899.3 ₹11,31,485.2 | 6,900 ₹11,31,600 |
| 4.00 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, making holes, fixing in position and applying a priming coat of approved steel primer all etc. complete job as per the requirement of the site and the direction of the Engineer-in-Charge | 61,951 | Kg | 105 ₹65,04,855 | 95 ₹58,85,345 | 110 ₹68,14,610 | 125 ₹77,43,875 | 90 ₹55,75,590 Lowest | 101.97 ₹63,17,143.47 | 103 ₹63,80,953 |
| 5.00 | Painting having two or more coats on new work with synthetic enamel paint of approved brand and manufacture to give an even shade eetc. complete job as per the requirement of the site and the direction of the Engineer-in-Charge | 4,392 | Sqm | 140 ₹6,14,880 | 250 ₹10,98,000 | 150 ₹6,58,800 | 300 ₹13,17,600 | 250 ₹10,98,000 | 118.91 ₹5,22,252.72 Lowest | 153 ₹6,71,976 |
| 6.00 | Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length ( total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron ‘Y’ shaped placed 2.4m or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge, with reinforced barbed tape(R.B.T.) / Spring core (2.5 mm thick) wire of high tensile strength of 165 kg/ sq. mm with tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately) | 6,300 | metre | 340 ₹21,42,000 | 500 ₹31,50,000 | 285 ₹17,95,500 Lowest | 550 ₹34,65,000 | 325 ₹20,47,500 | 286.63 ₹18,05,769 | 296 ₹18,64,800 |
| 7.00 | Fencing with G.I. barbed wire with angle iron post placed at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and provided with horizontal lines and two diagonals interwoven with horizontal wires, of barbed wire weighing 9.38 kg per 100 m (minimum), between the two posts fitted and fixed with G.I. staples, turn buckles etc. complete job as per the requirement of the site and the direction of the Engineer-in-Charge. (Cost of posts, struts, earth work and concrete work to be paid for separately). Payment to be made per metre cost of total length of barbed wire used. | 6,300 | metre | 20 ₹1,26,000 | 100 ₹6,30,000 | 15 ₹94,500 | 30 ₹1,89,000 | 15 ₹94,500 | 12 ₹75,600 Lowest | 309 ₹19,46,700 |
| 8.00 | Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after. The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer-in-charge. The elevational area of the scaffolding shall be measured for payment purpose . The payment will be made once irrespective of duration of scaffolding. (This item shall be operated when the scaffolding requirement exceeds 3.0 meter height (working platform height) from the respective existing ground level and wherever it is required the contractor will seek prior approval of Engineer in-Charge.) | 9,660 | Sqm | 280 ₹27,04,800 | 150 ₹14,49,000 | 100 ₹9,66,000 | 130 ₹12,55,800 | 150 ₹14,49,000 | 100 ₹9,66,000 | 59 ₹5,69,940 Lowest |
| 9.00 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc. hot finished seamless type tubes having a galvanized zinc coating thickness of 360 GSM , including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Make: Tata Structura Z+/ JSW Kalinga Z+ | 66,582 | kg | 158 ₹1,05,19,956 | 100 ₹66,58,200 Lowest | 130 ₹86,55,660 | 130 ₹86,55,660 | 180 ₹1,19,84,760 | 170 ₹1,13,18,940 | 143 ₹95,21,226 |
| 10.00 | Providing and fixing trapezoidal profile sheet in required colour (color shall be as per the choice of Engineer-in-Charge) having 28.5mm deep ribs with subtle square fluting in five pan at nominal 200mm centre to centre with min. 0.62mm thick (Base Metal thickness: min. 0.55mm) with required width having minimum yield strength of 550 MPa, metallic hot-dipped coated with Al-Zn alloy (55% Aluminium, 43.5% Zinc, 1.5% Si ) as per IS15961 - ZINCALUME® AZ150 (min. 150 g/m2 total on both sides) with Super Durable Polyester quality paint system of approved color, suitable for exterior application conforming to IS15965 class 3 . Make- Tata bluescope COLORBOND LYSAGHT® VARYDEK®1077/ JSW as per direction of Engineer-in-charge. The sheet shall have a total coating thickness of 40 microns, super durable polyester with solar reflectance technology paint system of 20 microns on exposed surface and 5 micron reverse polyester coat on back surface over 5 micron primer coat on both surfaces. The paint system would have stable resin & inorganic pigments for paint durability and is lead free for water harvesting. The sheet are to be fixed vertically with overlapping aprrox. 77mm ((a) In case of single side overlap: approx. 77mm on one side, (b) In case of both side overlap: approx. 77mm for each overlap at both side )) on structural steel framing by using high quality self drilling /self tapping screws of required size with EPDM seal/ other arrangment as per the actual requirement of the site. No payment shall be paid extra for cutting, welding, wastage and overlapping etc. complete job as per the requirement of the site and the direction of the Engineer-in-Charge. Indicative photo given below. | 8,967 | Sqm | 790 ₹70,83,930 | 850 ₹76,21,950 | 875 ₹78,46,125 | 750 ₹67,25,250 Lowest | 750 ₹67,25,250 Lowest | 861.86 ₹77,28,298.62 | 819 ₹73,43,973 |
Tender Value
₹3.5 Cr
EMD Value
₹7.0 L
Closing Date
6 Oct 2025, 2:00 pmClosed
Chief Officer Engineering
Administration Block, IIM Indore
Raising height of the Boundary wall from Gate-2 to Gate-3 (Re-tender).
2025_IIMID_877122_1
IIMI/Project/07/2025/172 File No. 516
Open Tender
Civil Works
Item Rate
270 days
IIM Indore
As per attachments
15 documents required · 15 mandatory
₹0
₹7.0 L
Conference Room, 2nd Floor, Administrative Block
24 Nov 2025
12 Sept 2025
7 Oct 2025
12 Sept 2025
6 Oct 2025
12 Sept 2025
19 Sept 2025
Amount
Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, etc. complete job as per the requirement of the site and the direction of the Engineer-in-Charge.
Centering and shuttering including strutting, propping etc. and removal of form work for : Foundations, footings, bases for columns etc. complete job as per the requirement of the site and the direction of the Engineer-in-Charge
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:1.5:3 (1 Cement: 1.5 coarse sand (zone-lll) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) etc. complete job as per the requirement of the site and the direction of the Engineer-in-Charge
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, making holes, fixing in position and applying a priming coat of approved steel primer all etc. complete job as per the requirement of the site and the direction of the Engineer-in-Charge
Painting having two or more coats on new work with synthetic enamel paint of approved brand and manufacture to give an even shade eetc. complete job as per the requirement of the site and the direction of the Engineer-in-Charge
Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length ( total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron ‘Y’ shaped placed 2.4m or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge, with reinforced barbed tape(R.B.T.) / Spring core (2.5 mm thick) wire of high tensile strength of 165 kg/ sq. mm with tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately)
Fencing with G.I. barbed wire with angle iron post placed at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and provided with horizontal lines and two diagonals interwoven with horizontal wires, of barbed wire weighing 9.38 kg per 100 m (minimum), between the two posts fitted and fixed with G.I. staples, turn buckles etc. complete job as per the requirement of the site and the direction of the Engineer-in-Charge. (Cost of posts, struts, earth work and concrete work to be paid for separately). Payment to be made per metre cost of total length of barbed wire used.
Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after. The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer-in-charge. The elevational area of the scaffolding shall be measured for payment purpose . The payment will be made once irrespective of duration of scaffolding. (This item shall be operated when the scaffolding requirement exceeds 3.0 meter height (working platform height) from the respective existing ground level and wherever it is required the contractor will seek prior approval of Engineer in-Charge.)
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc. hot finished seamless type tubes having a galvanized zinc coating thickness of 360 GSM , including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Make: Tata Structura Z+/ JSW Kalinga Z+
Providing and fixing trapezoidal profile sheet in required colour (color shall be as per the choice of Engineer-in-Charge) having 28.5mm deep ribs with subtle square fluting in five pan at nominal 200mm centre to centre with min. 0.62mm thick (Base Metal thickness: min. 0.55mm) with required width having minimum yield strength of 550 MPa, metallic hot-dipped coated with Al-Zn alloy (55% Aluminium, 43.5% Zinc, 1.5% Si ) as per IS15961 - ZINCALUME® AZ150 (min. 150 g/m2 total on both sides) with Super Durable Polyester quality paint system of approved color, suitable for exterior application conforming to IS15965 class 3 . Make- Tata bluescope COLORBOND LYSAGHT® VARYDEK®1077/ JSW as per direction of Engineer-in-charge. The sheet shall have a total coating thickness of 40 microns, super durable polyester with solar reflectance technology paint system of 20 microns on exposed surface and 5 micron reverse polyester coat on back surface over 5 micron primer coat on both surfaces. The paint system would have stable resin & inorganic pigments for paint durability and is lead free for water harvesting. The sheet are to be fixed vertically with overlapping aprrox. 77mm ((a) In case of single side overlap: approx. 77mm on one side, (b) In case of both side overlap: approx. 77mm for each overlap at both side )) on structural steel framing by using high quality self drilling /self tapping screws of required size with EPDM seal/ other arrangment as per the actual requirement of the site. No payment shall be paid extra for cutting, welding, wastage and overlapping etc. complete job as per the requirement of the site and the direction of the Engineer-in-Charge. Indicative photo given below.
Indicative Photo:
MDP INFRA INDIA PVT LTD (BID ID -3293928)
MRIG CONSTRUCTIONS (BID ID -3283562)
Eternal Infraheight Pvt Ltd (BID ID -3293622)
Technocrats Construction Co. (BID ID -3293708)
ICC INFRA PROJECT INDIA PVT LTD (BID ID -3293999)
SHUBH ENGINEERS (BID ID -3293349)
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.15 MB
BOQ_921990.xls
BOQ • 0.39 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .