Construction of 2x500 MT godown construction of new office room and sinking of bore well at Sonepur

Earth work excavation in hard /gravely soil including 50m initial lead& 5m lift initial lift including all labour etc complete

Filling sand in F&P including watering ramming with all cost & convayance and royality etc complete.

C.C (1:3:6) using 40mm size crusher broken granite metal including watering curing with all cost & convayance and royality etc complete.

Rigid & smooth centering & shuttering for RCC works including false works and dismantalling then after casting including cost of materials in ground floor complete in all respect.

Flyash Brick masonary in C M (1:6) including watering curing with all cost & convayance and royality etc complete.

Foundation and Plinth

Super sturucture Up to 3mt ht

Above 3m ht

R C C M20 using 20mm&10mm crusher broken chips including centering shuttering watering curing with all cost & convayance and royality etc complete but excluding M S ROD etc.

Column base

Plinth band/Tie beam/Grade beam

Column & beam

Column up to 5m ht

Above 5m ht

Lintel / chaja

Up to 5mt ht

Above 5m ht

RCC Roof Slab, Landing ,Balcony,Sunshade & chajja

Labour for cutting bending binding and tying the rod in position including all costs of binding wire & M S rod and labour etc

16mm thick cement plaster in C M (1:6) over brick work including watering curing with all cost & convayance and royality etc complete.

Up to 3mt ht

Above 3m ht

C.C (1:2:4) using 12mm size crusher broken granite metal including watering curing with all cost & convayance and royality etc complete.

Supplying,fitting,fixing of M.S shutter with frame with M.S angle of (35 x 35 x 6)mm and shutter sectionof 30 x 30 x 5mm with weldingof 25 x 6mm flat and welding of 16 gauge C R Sheet with arrangement of clamp,fitting of 3 nos 4" hinges,1 no of 2"hinges and 300mm x 16mm M.S Aldrop with 8" tower bolt including cost,conveyance,taxes of all materials labour T & P etc.required for the complete in all respect. etc.

Supplying,fitting,fixing of M.S Iron frame welded composite with M.S angle(50x50x6)mm with flat (50 x6)mm louvad type inside iron frame welded with wire netting or mesh (25x25)mm including serew nail & cost of materials including all cost convenyance etc.

Supplying,fitting & fixing at the top (below wall band) of openable MS ventilator glazed composite with M.S.Grill outside iron frame with glass pairs including supplying & fixing of putty & wire clips, screw & nails & cost of materials .

Manufacturing supplying M.S Angular truss, including fabrication and & fixing in position including all cost etc as per direction of Engineer-in-charge. complete.

Manufacturing supplying (50mm X 100mm X 50mm) 5mm C chhanel purlin,runner and Fender to plinth band (Angular) including fabrication and & fixing in position including all cost etc as per direction of Engineer-in-charge. complete.

Supplying & fitting fixing of H D D Bolt size of 60cm long with base plate of (150 x 150 x 6) mm fixing in position in C C (1:2:4) including all cost and materials etc complete.

Supplying,fitting & fixing of M.S flat of iron wind ties including drilling holes & supplying bolts & nuts.

Supplying & fitting fixing of precotated Galvanized iron profile sheet semi gloss of total coated thickness 0.50mm in roof drilling holes in wind ties including fixing of ridges vallyes,wind ties with all cost of J/L Hooks etc.complete as per direction Engineer- In- Charge.

Painting two coats with approved cement paint over one coat of cement wash including all costs and labour etc complete.(Inside Godown)

Up to 3mt ht

Above 3m ht

Painting two coats with approved weather coat paint over one coat of primer including all costs and labour etc complete.(Out side Godown)

Up to 3mt ht

Above 3m ht

Painting two coats with approved enamel paint over a coat of primer paint including all costs and labour etc complete.

Filling of excavated material including all costs,convayance and labour etc complete.

Providing & spraying two coats with anti termite treatement of approved qualite including all costs and labour etc complete.

2.5 cm thick A.S flooring with C.C (1:2:4) including punning & using 12mm size HG chips with all cost conveyance royalty and taxes etc comp.

Supplying & fitting fixing of Glass partition of 0.075m to floor base & fixing in position including all cost and materials labour etc complete.

Painting two coat with Coal tar epoxy paint over wall & floor incl cost of labour & material complete.

Supplying inserting bituminous expansion joint board of 12mm thick of depth 0.075m including all cost and cleaning all materials etc complete.

Providing and laying 20mm thick grading plaster in cement mortar(1:4) with water proof cement compound with curing etc. all complete.

12mm thick cement plaster (1:6) on brick work including all cost conveyance royalty & taxes etc. comp. to work site per 1sqm.

Up to 3mtr height

Above 3mtr hieght

Finishing wall surface of walls with cement based wall putty (water based) of approved make & finished smooth & even surface to receive painting including cost of scaffolding staging charges with cost of all materials taxes, labour T&P etc. complete.

Wall painting two coats with plastic emulation paint of approved shade on new work to give an even shade including cost of paint per sqm.

Supplying, fitting & fixing vetrifed tile in floors of size 600mm x 600mm of approved make conforming to IS: 13755 laid on 20mm thick cement mortar (1:4) and filling joints with white cement of approved quality including cost of all materials, labour T&P etc required for the work all complete as per direction of EIC.Data for 10 sqm, vide page - 235 of A/R - 2006, item - 1,in other building items chapter.(for new work only)

Fixing tiles/marble tiles in floors trades or steps and landing on 25mm bed of cement mortar 1:1 jointed with neat cement slury mixed with pigment to match the shade of the tiles including rubbing and polishing complete excluding cost of precast tiles.

Fixing glazed wall tiles of size 20cm x 30cm in floors, treads on steps and landing on 25mm thick bed of cement mortar 1:1 joined with neat cement slurry mixed with pigment to match the shade of the tiles incl. rubbing & polishing complete incl cost of glazed tiles.

Cost, supplying ,fitting &fixing of bathroom fibre door of approved make including fibre choukatha all GI fittings all cost ,conveyance taxes etc. complete.(M.R.)

Manufacturing supplying and labour charges for fitting and fixing in position of M.S. grills as per approved design with one coat of anti-corrosive painting & making good to the damages of walls or R.C.C. or other structurals complete including mending or cutting sizes or grooves with cost and conveyance of all materials and labour with T&P required for the work, taxes and royalties etc. complete.(M.R.)

Cost,supplying ,fitting &fixing of pre-cast concrete ventilators of size 0.38 m x0.25 m. (M.R.)

Supplying, fitting, fixing up window (sliding type) made up aluminium section 9778 as windows frame,section No 4095,4096 and 9777,3994 as shutter frame with 5mm thick black glass as penal fitted with rubber beading including locking arrangement including all fitting, cost of materials all taxes etc. complete as per direction of EIC.

Supplying, fitting, fixing of Aluminum door with OEL anodized Al. door section of 9202 as vertical member and, 9201as top member and 9200 as bottom & middle member & 9mm thick pre laminated board fixed on door frame by means of tapered clip No. 4660 and the frame to be completed by means of jointing angle no. 1855 including all cost of labour, T&P, hire charges of drilling machine, etc. complete as per direction of EIC.

Cement punning including cost & conveyance of cement per sqm.

Drilling of bore well any where in Sonepur including transporting from one place to another within Sonepur in alluvial soil sedimentary strata of clay and sand stone shal pebbles boulders etc. By first taking a pilot bore of 140/150 mm dia and then enlarging to required diameter direct or reverse rotary mud circulation method using rotary rigs ,fuel labour and drilling bentonite and water required for.

Supplying of Bentonite Earthing powder for drilling 150mm dia Bore well etc.

Supplying and delivery of single phase 1.0 HP panel board with two level guard and auto start suitable for 1.0 HP Submersible pumpset.

4 Sqr .mm x3 core cable

50MM Pvc pipe

50mm Pvc Nipple

50mm Pvc Elbow

Bore well cover plate

Plastic wire

50mm gate valve

Labour charges for erection of 1.0 HP submersible pumpset deep bore well type vertical inculding fixing and joining submersible cableup to the starter and all materials labour charges etc.

Providing 125mm dia plastic casing pipe with transpotation etc.

Providing Air compressor for clean borewell.

Providing rcc ring with cover for over head tank with connection pipe including cost , lab, con, tax, etc, complete.