801692/E8 PROVISION OF SWIMMING POOL AT AFS SULUR

Returning and filling of trenches in two parts (i) using riddled soil obtained from excavated soil upto depth of 30cm (8cm below cable and remaining above cable) for cushioning of cable and (ii) refilling the trench of remaining depth with normal excavated soil all as specified and directed. Note :- (i) Excavated soil shall be riddled by using sieve to separate composite particles etc as per IS 1255-1983 and refilling in trenches as in cable cushio

Lumpsum price worked out by the contractor for “Internal Water Supply” as listed in Schedule ‘A’ Part–II

Lumpsum price worked out by the contractor for “Internal Electric Supply" as listed in Schedule ‘A’ Part–III

Lumpsum price worked out by the contractor for "Site Clearance and Development" as listed in Schedule ‘A’ Part - IV .

Lumpsum price worked out by the contractor for "Path / Hardstanding" as listed in Schedule ‘A’ Part - V .

Lumpsum price worked out by the contractor for "Area Drainage" as listed in Schedule ‘A’ Part - VI .

Lumpsum price worked out by the contractor for “Sewage Disposal” as listed in Schedule ‘A’ Part – VII.

Design and Construction of Spectator gallery including changing room, store room and sanitary annex in (G+1) RCC framed construction with permanent specifications in RCC of grade as per structural drawings, PCC solid block masonry walls, ATT, PU based WPT, Galvalume sheet roofing, earthquake resistance as per latest IS etc complete all as specified and as shown on drawings.

Lumpsum price worked out by the contractor for “External Water Supply” as listed in Schedule ‘A’ Part – IX

Lumpsum price worked out by the contractor for “External Electric Supply” as listed in Schedule ‘A’ Part – X

Design and Construction of plant room building in RCC framed construction with permanent specifications in RCC of grade as per structural drawings, PCC solid block masonry walls, PU based WPT, earthquake resistance as per latest IS etc complete all as specified and as shown on drawings.

Earthing complete with galvanised steel earth plate electrode 60cm×60cm× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised iron earth strip of 25 X 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion complete all as specified and as directed.

Material and labour for Telephone wiring with unarmoured solid annealed bare copper industrial cable in concealed of size 0.5 mm, 3 pair with PVC conduit 25 mm dia all as specified and directed by Engr-in-charge

FILTRATION PLANT Supply, install, test and commissioning of Bobbin wound FRP Filter Indion Model ION 125 m3/hour made from FRP suitable with size 2000 mm dia having working pressure 2.5 Kg/cm2 complete with Lateral, media 2 layers f

ine &course with frontal Battery valve - 5 valve for operation of filter with suitable size of inlet, outlet valves, NRVs, control valves for operation, back wash system including valve manifold, drain out facilities complete including frontal piping of 150 PVC suitable size pipes for discharge of 125 M3/hour pressure rating 2.5 Kgf/cm2, fittings and filtration rate of 45-50 m3/hr, including initial filling of filter media, as required for smooth function and operation for swimming pool volume require 4nos filter each flow of 125m3/hr with total 500 m3 /hr and turn over period of 8 hours complete all as specified and directed. Make:- ION Exchange India, Thermax or any approved makes list in E-in-C's Branch Notes:- 1. Rate quoted shall be inclusive of all type & size of PVC frontal piping, control valves connected to the pressure filter as per manufacturers instructions 2. Piping up to pressure filter inlet frontal only & beyond outlet of pressure filter and drain pipe shall be measured and paid separately.

Lumpsum price worked out by the contractor for “Compound wall with Gate” as listed in Schedule ‘A’ Part – VIII.

Lumpsum price worked out by the contractor for “Perimeter Lighting” as listed in Schedule ‘A’ Part – XI

Lumpsum price worked out by the contractor for “Cooling Appliances” as listed in Schedule ‘A’ Part – XII

Supply and fix modular telephone socket RJ-11 one module all as specified and directed by Engr-in-charge

Supply and fix Mild steel box of telephone wiring including blocks, suitable for 30 pair all as specified and directed by Engr-in-charge

Sch 'A' Part - XIII : Fittings / Fixtures & Misc items. INTERNAL ELECTRIC SUPPLY Supply and fix LED batten Tubelight 4 ft with integral LED driver, plastic batten of 20 watts capacity including necessary electric connections 3 core 1 sqmm insulated copper wire from ceiling rose to tube light fitting complete all as specified and directed by Engineer-in-charge.

Supply and fix modular TV socket one module all as specified and directed by Engineer-in-charge

Material and labour for TV wiring with unarmoured coaxial cable RG-11 in concealed with PVC conduit 25 mm dia all as specified and directed by Engr-in-charge

PATH/HARDSTANDING/CULVERT Material and labour for preparing surfaces by brushing with wire brushes for removing caked mud etc., sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc., and applying evenly a priming/ tack coat with bituminous primer at 10 kg per 10 sqm and applying instant patching premixed bituminous material and making good the surface for movement of traffic all as directed.

SEWAGE DISPOSAL Supply and fix DWC HDPE pipe as per IS-16098 (Part-2), stiffness class SN-8, 150 mm (ID) laid in trenches and jointed complete all as specified and as directed.

Supply and fix DWC HDPE pipe as per IS-16098 (Part-2), stiffness class SN-8, 200 mm (ID) laid in trenches and jointed complete all as specified and directed.

COMPOUND WALL WITH GATE Supply and fix Concertina Coil (Punched type) as per latest IS; deep drawn quality with galvanising coating having medium barbs (barb length 24+1 mm pitch between two barbs 35 + 1 mm) fixed in position and secured to both sides of angle iron post stretched to a length so as to achieve 800 mm dia and spiral not less than 51 in 6 m length as in fencing including fixing with special galvanised fasteners such as J clips, C clips, U clips fixed at any height of security wall including necessary scaffolding complete all as specified and directed. Note: Each coil shall be stretched up to 6m length only.

EXTERNAL WATER SUPPLY Supply and Fix Centrifugal / monoblock pump set of suitable to operate with 3 Phase, 415 Volt AC 50 Hz supply and having ingress protection level IP-55, Class of insulation 'F', ISI Marked complete with Cast Iron/ Noryl Impeller, Carbon Steel / Stainless steel shaft and all necessary hardware and pipe fittings / gasket and duly fixed on rubber mountings and necessary electrical / earthing connection complete suitable to meet the following parameters: a) Operating Head: 30 Mtr b) Discharge: Not less than 39 LPS (After all losses) c) Suction: 100mm d) Delivery: 100 mm e) Rated RPM: Not less than 2800 Notes:- 1.) Above rates inclusive of necessary base frame and PCC foundation required to mount the pumpset. 2.) Electrical cables and earth lead conductors shall be measured and paid separately under respective items as mentioned in the schedule of External Electrification works.

Supply and laying and testing of ductile Iron pipe, S/S, Class “K-9” of size 150 mm dia in standard length, with inside cement mortar lining and black bitumen external coating conforming to IS including push on rubber gasket 3mm thickness complete laid in trenches/ floors/ PCC Blocks etc complete all as specified and as directed.

Supply and fix Non return Valve of class 1.6 PN, 150 mm dia complete all as specified and as directed.

Supply and fix Valves, Sluice, flanged of class 1.6 PN, 150 mm dia complete all as specified and as directed.

Supply and fix Foot Valve conforming to IS 4038, 100 mm (4”) dia complete all as specified and as directed.

Construction of brick masonry valve pit of size 90cm x 90cm X 90 cm (internal dimensions) with one brick thick wall in cement mortar 1:4 on 100mm thick PCC 1:4:8 type D2 (using 40mm graded broken stone aggregate) as in foundation lean concrete, including PCC 1:3:6 type C-1 ( using 20mm graded crushed stone aggregate) as in benching and coping and 10mm thick cement plaster in CM (1:4) internally and externally upto 15cm below ground level providing valve pit cover 40x40x6mm angle iron frame all-round fixed by means of 4 Nos holdfast 150mm long made out of flat iron 40x6mm embedded in PCC block (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) of size 230x200x100mm incl provn of hinges welded with angle iron frame and MS cover 3mm thick sheet, MS handle of suitable length and size welded with MS cover and suitable locking arrangement and applying two coats of synthetic enamel paint over a coat of red oxide primer including necessary excavation and earth work in soft/ loose soil complete all as shown on drawing and as specified.

Material and labour for CI/DI fittings of any type such as Tee, bends, tapers, collars, branch etc for spigot and socket end or one end socket and other end flanged or for both ends flanged type dia upto 150 mm complete all as specified and directed.

Supply and fix kinetic Air release Valve with double air outlets conforming to IS 14845 of size 100 mm dia bore and fixing up to cast iron water supply mains of size 150 mm dia complete all as specified

Boring of holes under road, pavement, hard standing by trenchless technology using ultra sounding technique and necessary machine including HDPE pipe of 200 mm dia suitable for 0.4 mpa working pressure complete all as specified and as directed.

All as per item No. 54 above but for Size of 5 steps complete all as specified and directed. Make:- ION Exchange India, Thermax or any approved makes list in E-in-C's Branch

Supply and fix 3 Core 10Sqmm Copper Stranded, XLPE Insulated, cores laid up, PVC inner sheathed, Unarmoured cable complete all as specified and as directed.

Material and labour for addition /alteration in old existing GI Pipe, screwing, cutting, threading fixing of valve complete all as specified and as directed.

EXTERNAL ELECTRIC SUPPLY Supply, install, test and commissioning stand alone HT Load break switch panel, 11 KV, 3 phase, 50Hz, 630A, 25 KA for 1 sec factory made, out door type cubicle fabricated out of CRCA sheet 3mm thick weather, dust and vermin proof, epoxy powder coated of IP-55 protection class with self contained air insulated compartment for bus bars and cable boxes with necessary support and 630A rated aluminum bus bar including cable galleries and provision of following switch gears including earthing switch, all pre-wiring with PVC copper conductor cable of suitable size including necessary PCC foundation and angle iron suitable size for mounting/ fixing all as specified and as directed as per the below details : (a) Manually operated air break, load break switch alongwith earth switch and fuse trip mechanism of HT HRC fuse - 50A, 230 V AC, Trip Coil and Aux Contact 2 No + 2NC. (b) Space heater with ON/ OFF switch 10A, 230V AC. (c) Emergency trip push button - 01 (d) Cubicle illumination lamp with holder - 01 (e) Door limit switch, 230V AC. (f) Provn of MCB, DP, 10A for control wiring (g) Provn of surge arrester 9 KV, 10 KA .(h) Provn of thermostat (j) Provn of indication lamp for LBS ON/ OFF, LBS E/S ON/ OFF 230V AC. (k) Chequred rubber mat of 11000 Volts grade of size 2.0x 0.9m and thickness 12mm with ISI marked

Returning and filling of trenches in two parts (i) using riddled soil obtained from excavated soil upto depth of 30cm (8cm below cable and remaining above cable) for cushioning of cable and (ii) refilling the trench of remaining depth with normal excavated soil all as specified and directed. Note :- (i) Excavated soil shall be riddled by using sieve to separate composite particles etc as per IS 1255-1983 and refilling in trenches as in cable cushioning.

Supply and fix cable jointing kit for 1.1 KV grade cable for end joint complete with Jointing material heat Shrink type and accessories suitable for 3.5 core XLPE, armoured, Al conductor cable of size 240sqmm end joint kit including all necessary misc items.

Boring of holes under road, pavement, hard standing by trenchless technology using ultra sounding technique and necessary machine including HDPE pipe of 150 mm dia suitable for 0.4 mpa working pressure complete all as specified and as directed.

Design, fabrication, supply and erecting connecting and testing totally enclosed LT Cubical panel board of suitable size, 3 Phase 4 wire system Outdoor type 3.15mm ,double door front and back opening type sloped canopy(Hood) on top extended 100mm all-around, separate compartment for each control gear, cable alley, provision of knock out type plates for various sizes of cable up to 500 Sqmm 3.5 Core in and out(Panel board shall have sufficient space to accommodate spare cables also) , incoming and outgoing feeders duly marked on revited plates etc, CPRI approved factory made fabricated out of 3.15mm thick CRCA sheet duly treated through 7 tank pre treatment process and painted with epoxy power coated mat finish of SIEMENTS GREY structural RAL 7032 shade colour, built in industrial type locking arrangement on front and back and pre wired with PVC insulated multi stranded copper conductor for controls and monitors, PVC sleeved aluminium strip for connecting MCCBs, Panel mounted on angle iron frame of 50x50x6mm thick duly painted and embedded in PCC 1:3:6 type C1, complete and consisting the following provisions:- (a) MCCB 250Amps Four Pole AC 415 Volts,50Hz,35kA , Adjustable Thermal & fixed Magnetic settings, - 01 No(incoming) (b) MCCB 200Amps 3Pole AC 415 Volts ,50Hz,35kA, - 02 No(Outgoing+Spare) (c) MCCB 63-100Amps 3Pole ,AC, 50Hz 415 Volts,35kA -01Nos(outgoings)

(d) Aluminium Busbar 400 Amps with Sleeves -04( three phase with neutral and connectors set of 4 (e) Indicator lamp set of 3 - 01 Set (f) Control wiring with PVC insulator multistranded copper conductor, insulators for busbar mounting 3 Nos of suitable CT's and accessories - 01 Set (g) Digital Type multi display VAF+PF cl-0.5 accuracy-01 No,with RS 485 (h) Insualtors:SMC/DMC

Design, fabrication, supply and erecting connecting and testing totally enclosed LT Cubical panel board of suitable size, 3 Phase 4 wire system Outdoor type 3.15mm ,double door front and back opening type sloped canopy(Hood) on top extended 100mm all-around, separate compartment for each control gear, cable alley, provision of knock out type plates for various sizes of cable up to 500 Sqmm 3.5 Core in and out(Panel board shall have sufficient space to accommodate spare cables also) , incoming and outgoing feeders duly marked on revited plates etc, CPRI approved factory made fabricated out of 3.15mm thick CRCA sheet duly treated through 7 tank pre treatment process and painted with epoxy power coated mat finish of SIEMENTS GREY structural RAL 7032 shade colour, built in industrial type locking arrangement on front and back and pre wired with PVC insulated multi stranded copper conductor for controls and monitors, PVC sleeved aluminium strip for connecting MCCBs, Panel mounted on angle iron frame of 50x50x6mm thick duly painted and embedded in PCC 1:3:6 type C1, consisting the following provisions:- (a) MCCB 160 Amps Four Pole AC 415 Volts,50Hz,35kA , Adjustable Thermal & fixed Magnetic settings, - 01 No(incoming) (b) MCCB 63-100Amps 3Pole AC 415 Volts ,50Hz,35kA, - 01 No(Outgoing) (c) MCCB 32-40Amps 3Pole ,AC, 50Hz 415 Volts,35kA -03Nos(02 outgoings+spare)

COOLING APPLIANCES Supply installation, connection, testing and commissioning of wall mounted type voltage stabilizer single phase 50 Hz 230 V, AC supply suitable for automatic operation single phase naturally air cooled, indoor type designed for input variation of voltage between 170 volts to 270 volt with output voltage stablized at 230 Volt circuit protection device complete of capacity 1 KVA complete all as specified and as directed.

Supply, install, commission and testing cubical type LT panel board outdoor, manufactured by a CPRI approved factory, floor mounted, dust & vermin proof, front and rear operated door with necessary locking arrangement made of 50 x 6mm MS angle iron frame work and CRCA sheet of 3.15mm thick duly painted with two coats of powder coated paint of approved shade after seven tank treatment process both internally and externally. The panel shall be suitable for 415 Volts, 50 HZ, 3 Phase 4 wire system and shall be complete with suitable capacity copper bus bar (1.5 times the incoming switch gear current rating) with suitable size of PVC insulated copper conductor, thimbles glands complete all as specified and directed with the following accessories :- Incoming:- (a) MCCB 4 pole, 415 Volts, 100 Amps, 25 KA - 01 No. Outgoing:- (a) MCCB 3 pole, 415 Volts, 40 Amps, 16 KA -03Nos (b) Fully automatic star delta starters suitable for 15 HP motors- 03 Nos

(c) MCB SPN, 220 Volts, 16 Amps,10 KA -02 Nos (Spare-01 nos) (d) Change over switch front operated 4 pole, 415 Volts, 100 Amps -01 No. (e) Digital VAF meter for basic electric system monitoring-01 Nos (f) Indicator lamp (RYB) (set of three) - 03 Set

Supply and fix LED batten Tubelight 2ft with integral LED driver, plastic batten of 10 watts capacity including necessary electric connections 3 core 1 sqmm insulated copper wire from ceiling rose to tube light fitting complete all as specified and directed by Engineer-in-charge.

Supply and installation of Earthing with Galvanised Earth Plate Electrode 600x600x 6mm thick burried directly in Ground (Earth Pit not less than 2.25 Metre below Ground Level) with Top edge of the Plate not less than 1.50 Metre below Ground Level, connected with Galvanised Earth Strip of size 32x6 mm (upto 7.50mm length) by means of Bolts, Nuts, Check Nuts and Washers of GI or Steel and connected Earthing Testing Point/Bus-bar including GI 40mm bore light grade Protection Pipe, Earth Plate surrounded by a packed thickness of Char Coal or Coke Dust mixed with Common Salt, Magnesium Sulphate (1 : 1 : 0.5) in alternate layers of not exc 150mm thick, PCC Pit in Cement Concrete 1:3:6 (20mm graded stone aggregate) and Pre-cast RCC Cover Slab of size 350x350x50 mm in Cement Concrete 1:2:4 (20mm graded stone aggregate), reinforced with 10mm dia TMT Bars @ 100mm Centre to Centre in both ways, GI Wire Mesh, Funnel with GI Watering Pipe 20mm bore medium grade including necessary Excavation in any type of soil, Returning, Filling and Removal of surplus Spoil disposal to out side MD land and all as shown in Electrical Plate No. 3 of MES Schedule Part-I and Testing on Completion complete all as specified and as directed.

Supply install test and commissioning of Electrical cabling for dosing system, starters of pumps, under water lights consisting of the following "i) Copper wiring of suitable size with Suitable GI Protection pipe for Pump set from starter panel to Motor (6 runs of Copper wire for star delta starters) - 03 Jobs" ii)Copper wiring of suitable size for ioniser, other misc with Suitable GI protection pipe iii) Copper wiring of suitable size for dosing pumps from starter panel to dosing Motor with Suitable GI protection pipe

Supply install, testing & commissioning of complete piping & valves and system all as shown in schematic & layout drgs and as required essentially for the swimming with concealed / open type piping with DI Pipe and fitting type and MS pipes and fittings, heavy grade, for suction, delivery and pool filtration system and consisting of minimum of the following:- i) Piping - DI PipeSupply and fixittings - 160 mm, 200 and 250 mm dia - 10 KG pressure, with suitable size Butterfly / sluice valves as applicable - ISI marked ii) Piping MS Pipe ISI marked of dia 150 mm for suction lines of three pumps separately with suitable 150 mm dia Foot valves and butterfly valves in each suction with CI body and synthetic metal ball, strainer etc complete. iii) MS delivery pipes from pump sets 150 mm dia MS epoxy coated heavy duty complete with suitable tailor made special and connected to common header and 150 mm dia NRV ISI marked -06 nos and PN 1.6 rating sluice valve IS-14846 -06 Nos complete. iv) MS epoxy coated heavy duty common header 350 mm dia for delivery and suction header of suitable length including required MS specials v) MS pipe heavy duty epoxy coated of 300 mm dia with specials complete from common header to pressure filters incl necessary butter fly valves vi) Out let DI pipes 200 mm dia from pressure

filters to swimming pool incl suitable MS butterfly valves 200 mm dia of suitable pressure rating of suitable lengths complete as required. vii) Concealed DI pipes 160 mm dia for outlet nozzles complete with suitable fixing arrangements inside diving pool complete viii) Concealed DI pipes 250 mm dia for Overflow from Swimming pool complete upto Balancing tank ix) Concealed DI pipes 160 mm dia for drain complete with suitable fixing arrangements inside swimming pool and upto common point and upto balancing tank with 150 mm dia sluice valve with SS spindle PN 1.6 rating IS- 14846 with Suitable operating rod from Balancing tank top complete all as specified and directed. x) MSEP wash out pipe 160 mm dia heavy duty from pressure filters till out side rain / Storm water drain including 150 mm dia butterfly valve ISI marked with complete. xi) DI pipes of suitable sizes for connection of pipes to dosing pumps and blower complete all as required.

Supply, install, test and commissioning of Water circulation, Horizontal split casing end suction pump 415 V, 50 Hz, 2800(minimum) RPM suitable for pressure filter designed discharge capacity 125 m3/hour @ 25 Mtr head having pump efficiency 65-75%, and suitable for filtration plant as per Sl No 1 above for ensuring turnover period 5-6.0 hour with suitable capacity prime mover. The pump shall be of cast iron body, bronze impeller, with mechanical seals, TEFC squirrel cage IE-2 induction motor, with M.S. Fabricated base plate, mounting channel frame, accessories and fittings like pressure gauges, Air release valve, drains, coupling, coupling guard etc including PCC foundation, vibration isolation arrangement complete all as specified and directed. (4 working and 1 stand by) Make:- ION Exchange India, Thermax or any approved makes list in E-in-C's Branch

Supply, install, test and commissioning of chlorine dosing pump (venturi drive pump) 0 - 11.93 LPH with PP/PVC dozing tank capacity 200 Ltr - 1 Nos and piping for inlet & outlet connection complete with control valves, NRV, metering, electric cabling & copper wiring through suitable size PVC concealed conduit from Main control panel to booster pump complete all as specified and directed. Make:- ION Exchange India, Thermax or any approved makes list in E-in-C's Branch

Supply, install, test and commissioning of Acid/alkali/alum Dosing pump (venturi drive pump) 0 - 11.93 LPH with PP/PVC dozing tank capacity 200 Ltr with high speed stirrer and piping for inlet & outlet connection complete with control valves, NRV, electric cabling & copper wiring through PVC conduit from Main control panel to booster pump complete all as specified and directed. Make:- ION Exchange India, Thermax or any approved makes list in E-in-C's Branch

(d) Aluminium Busbar 250 Amps with Sleeves -04 (three phase with neutral and connectors set of 4 (e) Indicator lamp set of 3 - 01 Set (f) Control wiring with PVC insulator multistranded copper conductor, insulators for busbar mounting 3 Nos of suitable CT's and accessories - 01 Set (g) Digital Type multi display VAF+PF cl-0.5 accuracy-01 No, with RS 485 (h) Insualtors:SMC/DMC

Supply, install, test and commissioning of Pool drains (drain out sump) - 500mm x 500mm made out from SS 304 complete all as specified and directed. Make:- ION Exchange India, Thermax or any approved makes list in E-in-C's Branch

Design, fabrication, supply and erecting connecting and testing totally enclosed LT Cubical panel board of suitable size to accommodate the under mentioned items with proper working space , 3 Phase 4 wire system outdoor type 3.15mm thickness ,double door front and back opening type sloped canopy(Hood) on top extended all-around, separate compartments for capacitor banks, ( control gear, cable alley,busbar chamber, cable entry, provision of knock out type plates(gland plate) for various sizes of cable up to 185 Sqmm 3.5 Core in and out( panel board shall have sufficient space for working) , incoming and outgoing feeders duly marked on revited plates etc, CPRI approved factory made fabricated out door thick CRCA sheet duly treated through 7 tank pre treatment process and painted with epoxy power coated mat finish of SIEMENTS GREY structural RAL 7032 shade colour, built in industrial type locking arrangement on front and back and pre wired with PVC insulated multi stranded copper conductor for controls and monitors, PVC sleeved aluminium strip for connecting MCCBs, Panel mounted on suitable size angle iron frame thick duly painted and embedded in PCC 1:3:6 type C1, 45cm below ground level and 15cm above ground level and comprising of the following (a) MCCB, 4 pole,160Amps with ultimate breaking capacity Icu - 35kA at 415 Volts and microprocessor release conforming to IEC 60947 Part -I/IS-13947 Part-I with breaking capacity Ics = Icu at 415 Volts of 35kA, overload setting 70% to 100% - 01 Nos ( As Incomer) (b) MCB, 3 pole, 6-32 Amps with ultimate breaking capacity Icu - 10kA at 415 Volts conforming to IEC 60947 Part -I/IS-13947 Part-I with breaking capacity Ics = Icu at 415 Volts of 10kA-03Nos. (c) Capacitor Banks, 15kVAR (1X15kVAR) each, 3 Phase 415v Heavy duty box type - 01 Nos

Supply and fix 18 inch long Nylon brush complete all as specified and directed. Make:- ION Exchange India, Thermax or any approved makes list in E-in-C's Branch

Supply and fix Telescopic pole 4.8 Mtr long with extendible up 9 Mtr made of aluminium tubing complete all as specified and directed. Make:- ION Exchange India, Thermax or any approved makes list in E-in-C's Branch

Supply and fix Test Kit for PH & Residual chlorine complete all as specified and directed. Make:- ION Exchange India, Thermax or any approved makes list in E-in-C's Branch

Supply and fix Leaf rack made out of aluminium frame all as per sample complete all as specified and directed. Make:- ION Exchange India, Thermax or any approved makes list in E-in-C's Branch

Supply & install Stainless steel ladders of swimming pool of 3 steps made out from stainless steel AISI-304 of width 500mm with handrails and shall be 40mm dia of stainless steel with non-slip complete all as specified and directed. Make:- ION Exchange India, Thermax or any approved makes list in E-in-C's Branch

Supply and installation of Earthing with Galvanised Earth Plate Electrode 600x600x 6mm thick burried directly in Ground (Earth Pit not less than 2.25 Metre below Ground Level) with Top edge of the Plate not less than 1.50 Metre below Ground Level, connected with Galvanised Earth Strip of size 32x6 mm (upto 7.50mm length) by means of Bolts, Nuts, Check Nuts and Washers of GI or Steel and connected Earthing Testing Point/Bus-bar including GI 40mm bore light grade Protection Pipe, Earth Plate surrounded by a packed thickness of Char Coal or Coke Dust mixed with Common Salt, Magneisum Sulphate (1 : 1 : 0.5) in alternate layers of not exc 150mm thick, PCC Pit in Cement Concrete 1:3:6 (20mm graded stone aggregate) and Pre-cast RCC Cover Slab of size 350x350x50 mm in Cement Concrete 1:2:4 (20mm graded stone aggregate), reinforced with 10mm dia TMT Bars @ 100mm Centre to Centre in both ways, GI Wire Mesh, Funnel with GI Watering Pipe 20mm bore medium grade including necessary Excavation in any type of soil, Returning, Filling and Removal of surplus Spoil disposal to out side MD land and all as shown in Electrical Plate No. 3 of MES Schedule Part-I and Testing on Completion complete all as specified and as directed.

Supply and fix Leaf skimmer made out of aluminium frame all as per sample complete all as specified and directed. Make:- ION Exchange India, Thermax or any approved makes list in E-in-C's Branch

Supply install, testing & commissioning of complete piping & valves and system all as shown in schematic & layout drgs and as required essentially for the swimming with concealed / open type piping with UPVC pipe and fitting type UPVC schedule 80 and ERW MS pipes and fittings, heavy grade, epoxy coated for suction, delivery and pool filtration system and consisting of minimum of the following:-

(a) Bus bar Aluminum - 300 A capacity- 04 Nos, high conductivity, suitable for 415 V, 50 Hz supply including interconnection from incoming and out going feeders with suitable mounting insulators, heat shrinkable colour sleeves. (b) MCCB four pole 440 V, 200 Amp, 36 KA, range 150-200 Amps, with thermal and magnetic settings - 01 No ( Incomer) (c) MCCB three pole 440 V, 50-63 Amp, 36 KA, range 40-63 Amps, with thermal and magnetic settings - 05 No (For swimming pool motors) (d) MCB three pole 440 V, 6-32 Amp, 10 KA - 03 Nos (For ionisation panel +spare) (e) MCB SPN 6-32 Amps, 10 KA C series -04 Nos ( for dosing pumps) (f) FASD starter suitable for pump sets - 05 Nos for pump size as mentioned above with adjustable over load relay, electronic timer, single phase preventer incl all mounting arrangements. (g) Motor protection relay for thermal overload earth fault locked rotor, single phasing current unbalance phase sequence reversal, under current protection for suitable pump set -03 Nos (j) Digital Type multi display VAF+PF cl-0.5 accuracy-01 No, with RS 485 port including CTs (k) SMC/DMC insulators (l) MCB SPN 20 Amps capacity, 240 V 10 KA , C series - 02 Nos (m) MCB SP 06 Amps capacity 240V 10KA, C Series - 03 Nos

Supply, install, test and commissioning of Trolley mounted suction sweeper with self priming electric driven pump set suitable for cleaning swimming pool capacity, complete with PVC braided vacuum hose pipe of length minimum 30 Mt, 900 mm size Aluminium / bronze vacuum head, flexible copper cable from Main, PVC floats, wire rope and all connected accessories complete all as specified and directed. Make:- ION Exchange India, Thermax or any approved makes list in E-in-C's Branch

Supply and install Over flow grating 300 mm x 300 mm wide shall be provided along the perimeter of pool as shown in drawing with slope 1:200, towards shall be provided as shown in drawing with slope 1:200, towards balancing tank including Gratings and support profiles made in white UV stabilized PP of size wide. Make:- ION Exchange India, Thermax or any approved makes list in E-in-C's Branch

Supply install test and commissioning of Pool under water integral LED model 20 WATT LED wall mounted type working on 12 V DC, IP68 complete with built-in driver, including push in connector in 4 pole, flexible conduit and all fixing arrangement in swimming pool wall including and flexible conduit accommodate pool light. Make:- ION Exchange India, Thermax or any approved makes list in E-in-C's Branch

Supply and fix 30 Watts LED new generation energy saving and environmental friendly long life LED building light made up of pressure die cast aluminium housing with high efficiency LED as lighting source and lens embedded PC cover having Bottom Opening separate driver compartment with IP66 protection and impact resistance of IK08 complete all as specified and as directed.

Note :- (a) All Joints should be joined by tight nut/bolts. (b) After completion of work earthing shall be tested by the contractor in presence of JE/ Engineer-in-Charge, User and proper record shall be maintained duly signed by all concerned. (c) Earth resistance tester shall be provided by the contractor. It should be calibrated from authorised company/ lab. (d) After testing if desired earth resistance of less than 5 Ohm is not obtained, the earthing will be redone at no extra cost to Govt till desired result is obtained.

Supply and fix Pool jets made of ABS material of size 100mm dia x 65mm height, horizontal flow design and flow rate of 6000lph adjustable type with end connection of 50mm BSP for uniformly spreading of water and chemicals along the pool floor complete all as specified and directed. Make: ION EXCHANGE Code No.AFI-ION-50 or techno commercially equivalent model of UV RICH, as approved by GE.

Sch 'A' Part - I : BUILDINGS OR WORKS Design and Construction of Swimming pool of size 50m x 21m of depth 1m at both ends and gradually increasing to 2.5m at the middle including side walks (wet & Dry Deck), cascade, Balancing Tank, foyer, entrance lobby all as per latest IS etc complete all as specified and as shown on drawings.

PERIMETER LIGHTING Supply and fix time outdoor type digital timer control panel,3 pole 32 Amps, 230/415v including all contractors, suitable capacity of MCB,digital timer and al misc clampsm nuts bolts necessary prewiring and cable inlet/oulet terminations complete all as specified and as directed.

Supply install test and commissioning of Junction box of suitable size round/square type with water proof covering made of ABS plastic material. Make:- ION Exchange India, Thermax or any approved makes list in E-in-C's Branch