Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹8.3 LAccepted-AOC ANANDAPALLY WARD NO VII P O P S MAL DIST JALPAIGURI PIN 735221 WB | MAL | JALPAIGURI | WB | 735221 | L1 | Accepted-AOC LOWEST BIDDER | |
| 2 | L2₹10.3 L+₹1.8 L (20.9%)Rejected-Finance 234 4 JC BOSE ROAD KOLKATA | KOLKATA | WEST BENGAL | 700001 | L2 | Rejected-Finance OTHER THAN LOWEST BIDDER |
Tender Value
₹10 L
EMD Value
₹20,000
Closing Date
23 Aug 2021, 6:00 pmClosed
CWE BINNAGURI
HQ CWE BINNAGURI
SPECIAL REPAIRS TO ROAD FROM MES POWER HOUSE TO PO 29 MD ACCN AT SEVOKE ROAD MIL STN UNDER GE SEVOKE ROAD
2021_MES_463433_1
8010/BIN(SEV)/ 10 OF 2021-22
Open Tender
Civil Works
Item Rate
90 days
GE SEVOKE ROAD
AS PER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
GE SEVOKE ROAD
₹20,000
Yes
31 Aug 2021
28 Jul 2021
24 Aug 2021
28 Jul 2021
23 Aug 2021
11 Aug 2021
Amount
Schedule 'A'
M&L for repairs to potholes of any depth n. exc 1.00 sqm each including sweeping free from dust & mud etc, scoring sunken surfaces in road, path etc, cutting around edge to atleast 25 mm in depth, making good by filling in screened and graded road metal watering and well ramming (including supply of road metal) and applying evenly a priming/tack coat @ of cationic emulsion Rs-1 @ 3.50 Kg/10 Sqm putting in 40mm thick SDAC rolled and compacted with 8-12 tone power roller complete all as specified and as directed. Note : SDAC will be measured & paid under item 15.00 here-in-after. Pot hole register consisting sketches of surrounding locations shall be prepared before execution of this item and signature of Engineer-in-Charge and contractor shall be obtained. No payment in RAR shall be made without pot hole register.
M&L for preparing of existing black top surfaces of road and raw bituminous macadam surface by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with gunny bags or by air compressor to remove all loose dirt etc and applying evenly a priming / tack coat with cationic bitumen (RS -1) @ 2.5Kg/per 10Sqm to receive Bituminous macadam and SDAC complete all as specified and directed.
M&L for bituminous premix asphaltic semi dense concrete 40mm consolidated thickness (minimum) with 5.5% binder content of paving bitumen Gde-VG-30 by weight of total mix, rolled and compacted, mixed in mechanical hot mixed plant and pre-mixed material laid with mechanical paver, finished including rolling to required gradient and camber with 8 to 12 tonne power roller to required compaction complete all as specified in the relevant clauses of SSR Part-I (2009) and as directed. Note : (a) The actual binder contain used shall be as per optimised content based on approved Job mix formula irrespective of whatever indicated above. (b) Rate deemed to be included for making good of any undulation/damages in wearing surfaces, where semi dense asphaltic concrete to be laid. (c) Price adjustment shall be done on minus side (without permissible tolerance on minus side) with reference to binder content indicated above and actually to be used in the work. (d) Price adjustment for paving bitumen shall be done @ Rs. 50.00 per KG for any variation on minus side irrespective of actual purchase rate. However, no adjustment for variation on plus side will be made.
M&L for 2.5mm thick painting to road surfaces as in lines, dashes, arrows, letters , zebra crossing etc on roads, pavements and like with thermoplastic road marking paint @ 5 kg/Sqm and applying glass beads @ 300 gms/Sqm over painted surfaces while the painted surfaces are hot by mechanical means including cleaning surfaces complete all as specified and as directed. (Note. The painting shall be carried out through mechanical appliances by the company's approved applicator).
S&F Tubular Delineator made of Ms Pipe 16 gauge 75mm dia & 900mm Long painted with black synthetic enamel paint and pasted three strips in white yellow& Red colours of Reflective tape using H.I.P grade and Embedded in cement concrete (1:3:6 type C1 20mm graded stone aggregate) of pit size 300 x 300x 300 mm complete all as specified and directed.
S&F in repair of two way reflective road stud 100x100x25mm plastic body reflective panel of amber, amber red or white colour provided at site as per manufacturer's instruction complete all as specified and as directed.
Dismantling of bricks laid on edge as in kerbs, road edging etc, laid drg, separation of serviceable bricks from the unserviceable, stacking the serviceable materials neatly for re-use and disposal of unserviceable materials, debris and rubbish to distance n. exc 100m complete all as specified and as directed.
M&L for Continuous brick edging (sub class 'B' brick, old size, best quality locally available) with width equal to the width of the brick; laid dry on end vertically complete all as specified and directed.
Labour only for Continuous brick edging (sub class 'B' brick, old size, best quality locally available) with width equal to the width of the brick; laid dry on end vertically complete all as specified and directed. (Note:- Serviceable bricks materials shall be obtained from item No. 7.00 here in before for re-use).
M/S SARKAR BROTHERS
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .