REPAIR TO SUNKEN FLOOR, VERTICAL STACKS INCLUDING REPAIRS TO TOILETS AND OTHER CONNECTED B/R WORKS IN OTM-04 TO OTM-09 OF ZONE M UNDER AGE B/R-V OF GE (N) BATHINDA AT BATHINDA MIL STN

Amount

B/R Works

Demolition of cement concrete (unreinforced) in first floor, ground floor, sunken portion and paving at any thickness below or above floor level of any description and in any position including removing rubbish material from building and thrown in low lying empty area (as per direcction of AGE/JE) at any distance upto 500 metres from the site complete all as specified and as directed by Engineer-in-Charge

Material and labour for sunken treatment to sunken floor, cleaning the surface by wire brush, rendering to floor and sides with 10mm thick in cement mortar (1:3) including mixing of liquid WPC in mortar @ 200ml per bag of cement of 50kg, finished even and smooth without using extra cement, after that material & labour providing two coat of two components (one part liquid two part powder) ready to use cementitious water proofing coating on properly prepared surface by brushing having elongation of > 50% for the applying water proofing treatment on horizontal and vertical surfaces of sunken floor, complete all as specified and as directed by Engineer-in-charge. NOTE:- (i) Applying 1st coat of two components modified polymer coating. (ii) Provn of glass fiber mess of 2mm x 2mm immediately on alone coating. (iii) Apply 2nd coat of two components modified polymer coating after 72 Hrs on horizontal and vertical surfaces. (iv) WPC shall be measured and paid separately under relevant items of BOQ as "Supply only".

Material and labour for 30mm thick cement concrete (1:2:4), type B-0 (using 12.5 mm graded stone aggregate) as in floor, sunken floor etc, finished rough to receive tiles, including mixing of liquid WPC in mortar @ 200ml per bag of cement of 50kg, complete all as specified and as directed by the Engineer-in-Charge. (Note :- WPC shall be measured & paid separately as Supply only)

Material and labour for rendering/plastering 15mm thick in cement mortar (1:4) on any face of Brick walls or concrete surfaces of sunken including mixing of liquid WPC in mortar @ 200ml per bag of cement of 50kg, finished even and smooth without using extra cement complete all as specified and as directed by the Engineer-in-Charge. (Note :- Water proofing compound shall be measured & paid separately as Supply only)

Material & Labour for PCC (1:5:10) type E-2 (using 40mm graded stone aggregate) as loose filling of sunken floors complete all as specified and as directed by Engineer-in-charge.

Supply only liquid water proofing compound complete all as specified and as directed by the Engineer-in-Charge.

Taking down cement or cement lime plaster from brick wall etc including racking out joints, hacking for key & scrubbing down with water etc complete all as specified and directed by Engineer-in-Charge.

Material and labour for rendering/plastering appx 10mm thick (matching with existing plaster thickness) in cement mortar (1:3) on any face of ceiling in patches matching with existing, finished fair and even and smooth without using extra cement, complete all as specified and as directed by the Engineer-in-Charge.

Material and labour for rendering/plastering appx 15mm thick (matching with existing plaster thickness) in cement mortar (1:6) (internal ) on old brick or concrete surfaces of walls/pillars /cornices in patches matching with existing, finished even and smooth without using extra cement, complete all as specified and as directed by the Engineer-in-Charge.

Material and labour for rendering/plastering 15mm thick in cement mortar (1:4) on any face of Brick walls or concrete surfaces (external surface), finished even and smooth without using extra cement, complete all as specified and as directed by the Engineer-in-Charge.

Material and labour for preparing newly plastered and newly plaster in patch works on surface of ceiling by sand papering or by any other mean and after preparing the surfaces applying three coats of white wash complete all as specified & directed by Engineer-in- charge

Material and labour for preparation of new plastered surfaces of walls/pillars /cornices by brooming down or by sand papering or by any other mean and after preparing the surfaces applying two coats of oil bound distemper complete all as specified and as directed by Engineer-in-Charge.

Material and labour for preparation of new plastered surface and newly plaster in patch works on surface of walls/pillars /cornices by brooming down with using broom/sand papering or by any other mean, washing down with water and applying two coats of cement base paint as per approved tint/colour with using paint brush complete all as specified and as directed by Engineer-in-Charge.

Demolition of floor hearth or wall tilling including cement mortar bedding but not backing including removing rubbish material from building and thrown in low lying empty area (as per direcction of AGE/JE) at any distance upto 500 metres from the site complete all as specified and as directed by Engineer-in-Charge

Material and labour for Non Skid ceramic coloured tiles 7 to 8 mm thick square or rectangular area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as in floor set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile including necessary cutting as per site requirement, tiles laid over and including 15 mm thick bedding layer (screed) in cement mortar (1:6) complete all as specified and directed by Engineer-in-Charge.

Material and labour for Glazed ceramic coloured tiles of size 350mmx 250mm / 450mmX 350mm/ 450mmX 300mm, 7mm to 8mm thick, as in vertical surface set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile including necessary cutting as per site requirement, tiles laid over and including 10 mm thick (Av thickness) bedding layer (rendering) in cement mortar (1:4) complete all as specified and as directed by Engineer-in-Charge.

Demolition stone/marble slabs of any description or thickness as in floors/ cooking platform/steps etc. laid bedded and pointed in any mortar including removing rubbish material from the site complete all as specified and as directed by Engineer-in-charge .

Material and labour 18-20mm thick machine cut, granite duly factory grinding and polished (table rubbed and polished) of approved colour for counter sunk wash basin, plateform/cooking plateform or as directed, including screed bed 15mm thick in cement mortar (1:4) (grey cement slurry) including pointing in white cement (1:2) using marble dust with admiture of pigment to match with shade of granite stone slab including cutting as required including cleaning and extra polishing if required complete all as specified and as directed by Engineer-in-Charge.

Taking up or down existing galvanised steel water tubing (GI pipe) 15mm bore including fitting/connection from wall/ceiling/floor/concealed etc. including removing from site/keeping aside for reuse (serviceable as good condition as directed) complete all as specified and as directed by Engineer-in-charge.

Taking up or down existing galvanised steel water tubing (GI pipe) 20mm bore including fitting/connection from wall/ceiling/floor/concealed etc. including removing from site/keeping aside for reuse (serviceable as good condition as directed) complete all as specified and as directed by Engineer-in-charge.

Supply and fixing galvanized steel tubing (GI pipe) medium grade 15mm bore with all new fittings like elbow, tee, union, socket, reducer etc. and fixed complete to walls, ceiling and laid in floor or concealed in walls including cutting chases in wall (as required) and making good disturbed surfaces of walls including cutting and threading of existing pipe any dia for insertaion of tee branch including hole in wall to pass the pipe out side for connection as per site requirment complete all as specified and as directed by Engineer-in- charge.

Supply and fixing galvanized steel tubing (GI pipe) medium grade 20mm bore with all new fittings like elbow, tee, union, socket, reducer etc. and fixed complete to walls, ceiling and laid in floor or concealed in walls including cutting chases in wall (as required) and making good disturbed surfaces of walls including cutting and threading of existing pipe any dia for insertaion of tee branch including hole in wall to pass the pipe out side for connection as per site requirment complete all as specified and as directed by Engineer-in- charge.

Supply & fixing in repair vitreous china wash down water closet pan (pedestal pattern, EWC) white clour (excluding flushing cistern and flush pipe) including connection to drain etc., including plastic water closet seat with cover (white colour) closed pattern with flat bottom and mild steel chromium plated or aluminised hinging device including stainless steel chromium plated jet spray with 01 mtr long PVC pipe with CP connector and necessary nut bolts and with necessary CP screws and plug for fixing WC complete all as specified and as directed by Engineer-in- charge.

Supply & fixing in repair vitreous China squatting pan 'Orissa' pattern white of size 580mmx440mm white with integral foot rests and CI 'P' or 'S' trap (excluding flushing cistern, flush pipe above floor), including demolation of tile, PCC, taking out mass concrete filling and re filling PCC (1:7:12) type F2 after fixing of WC and trap with proper joints leakproof including PVC flush pipe upto finished floor level, and making good with 30mm thick cement concrete (1:2:4) type B0 finished rough as a sub base to recieved tile work and including all other connected work as required upto entire satisfaction of Engineer-in-charge complete all as specified and as directed by Engineer-in- charge. (NOTE : Tile work with screed and Sunken floor water proofing treatment shall be measured and paid separately under appropriate item of this schedule.

S&F in repairs Vitreous china (White) Wash Hand Basin (WHB) Counter sunk in Granite slab, white, size 550x400mm including fancy type 32mm dia CP waste coupling and PVC waste pipe complete all as specified and directed by Engr-in-Charge

Supply & fixing in replacement vitreous china urinal of size 410x380x950mm, half stall type white, with grating and union for discharge pipe (excluding flushing cistern and flush pipe ) including CP urinal spreader and CP connection and waste pipe complete all as specified and directed.

Supply and fixing in replacement 10 litres capacity PVC valveless syphonic action type low level flushing cistern (white colour) with inlet, ball valve, float, handle including brackets and 32mm dia PVC flush pipe, PVC Connection 450 mm long with PTMT nuts suitable for 15mm bore pipe complete all as specified and directed by Engineer-in-Charge.

Dismantling/taking down of existing unserviceable PVC water storage tanks capacity exc. 250 litre but not exc. 500 litre complete all as specified and as directed by Engineer-in-charge.

Supply and Fixing in repair 500 litres capacity Rotational moulded polyethylene in white colour, three layered, water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and as directed by Engineer-in- charge.

Dismantling/taking down of existing unserviceable PVC water storage tanks capacity exc. 500 litre but not exc. 1000 litre complete all as specified and as directed by Engineer-in-charge.

Supply and Fixing in repair 1000 litres capacity Rotational moulded polyethylene in white colour, three layered, water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and as directed by Engineer-in- charge.

Supply & fixing in replacement 450 mm long PVC connection 15mm size with PTMT nuts complete all as specified and as directed by Engineer-in-charge.

Supply and fixing in replacement bib tap long body cast copper alloy, chromium plated fancy type, with crutch or butterfly handle with capstan head, screwed down, screwed for iron pipe or for brass ferrule 15mm bore complete all as specified & directed by Engineer-in-charge. Note :- The minimum weight shall be as given in SSR or in relevant IS.

Supply and fixing in replacement stop valve/angle valve cast copper alloy, chromium plated fancy type screwed down high pressure with crutch or butterfly handle, screwed both ends suitable for 15mm bore iron pipe complete, all as specified & directed by Engineer-in-charge. Note :- The minimum weight of stop valve/stop cock/angle valve shall be as given in SSR or in relevant IS.

Supply and fixing in replacement concealed stop cock cast copper alloy, chromium plated, fancy type, long shank and cup, screwed both ends suitable for 15mm bore iron pipe complete, all as specified & directed by Engineer-in-charge. Note :- The minimum weight of stop valve/stop cock shall be as given in SSR or in relevant IS.

Supply & fixing in replacement Swan Neck pillar tap cast copper alloy with capstan head, chromium plated, fancy type, high pressure with or without letter 'Hot' or 'Cold' with long shank and fly nuts screwed for iron pipe or for brass ferrule 15mm bore complete, all as specified & directed by Engineer-in-charge. Note :- The minimum weight of tap shall be as given in SSR or in relevant IS

Supply & fixing in replacement chromium plated shower rose 125mm size, with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and as directed by Engineer-in-charge.

Supply and Fixing in repair Ball valve high pressure of PTMT with epoxy coated Aluminium rod and high density plastic ball screwed for iron pipe of size 20 mm bore (minimum weight 20mm-210 gram) complete all as specified and as directed by Engineer-in- charge.

Supply & fixing in replacement 32mm spring type PVC waste pipe fixed to WHB & sink etc., complete all as specified and as directed by Engineer-in-Charge. Note:- Minimum length of each pipe should more than 0.70 RM

Supply & fixing in replacement 40mm spring type PVC waste pipe fixed to WHB & sink etc., complete all as specified and as directed by Engineer-in-Charge. Note:- Minimum length of each pipe should more than 0.70 RM

Material & Labour for 100 mm bore cast iron soil waste and vent pipe (spun pipe ) in any length with or without ears, fixed to wall with stack clamps (interval of 1m) made out of FI 50x5mm and 16mm dia round iron stay and with lead jointing including dismantling/taking down/out old pipe complete all as specified and as directed by Engineer-in- charge.

Material & Labour for 100 mm bore cast iron soil waste and vent pipe (spun pipe ) in any length with or without ears, laid on floor and with lead jointing including dismantling/taking down/out old pipe complete all as specified and as directed by Engineer-in- charge.

Material & Labour for 75 mm bore cast iron soil waste and vent pipe (spun pipe ) in any length with or without ears, fixed to wall with stack clamps (interval of 1m) made out of FI 50x5mm and 16mm dia round iron stay and with lead jointing including dismantling/taking down/out old pipe complete all as specified and as directed by Engineer-in- charge.

Material & Labour for 75 mm bore cast iron soil waste and vent pipe (spun pipe ) in any length with or without ears, laid on floor and with lead jointing mortar including dismantling/taking down/out old pipe complete all as specified and as directed by Engineer-in- charge.

Material & Labour for 75 mm dia cast iron floor trap with CP grating including jointing to waste pipe with solvent fixed in cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate including taking out old floor trap complete all as specified and directed by Engineer-in-Charge.

Supply & fixing in replacement 100mm bore cast iron bends (any radius)/elbo, diminishing pieces or tapers (larger bore measured) with oval access door fixed withwith lead jointing complete all as specified and as directed by Engineer-in- charge .

Supply & fixing in replacement 75mm bore cast iron bends (any radius)/elbo, diminishing pieces or tapers (larger bore measured) with oval access door fixed with with lead jointing complete all as specified and as directed by Engineer-in- charge.

Supply & fixing in replacement 100mm bore CI branch pieces single (equal or unequal), ordinary or inverted (Spigot or socket type) or with parallel branch fitted with oval access door as specified & directed by Engineer-in- charge.

Supply & fixing in replacement 75mm bore CI branch pieces single (equal or unequal), ordinary or inverted (Spigot or socket type) or with parallel branch fitted with oval access door as specified & directed by Engineer-in- charge.

Supply & fixing in replacement 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints for drain or rain water fixed along walls with stack clamps made out of FI 50x5mm and 16mm dia round iron stay (interval of 1m) including nut bolt and PCC work, including dismantling/taking down old pipe complete all as specified and as directed by Engineer-in- charge.

Supply & fixing in replacement 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors all as specified & directed by Engr-in-Charge

Supply & fixing PVC (SWR) bends (any radius) suitable for 110mm bore pipe fixed to walls or laid in floor complete all as specified and as directed by Engineer-in- charge.

Supply & fixing 110mm bore PVC (SWR) 'Y'/'T' junction (double/ single ), equal or unequal (any radius) suitable pipe fixed to walls or laid in floor complete all as specified and as directed by Engineer-in- charge.

Supply & fixing in replacement 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints for drain or rain water fixed along walls with stack clamps made out of FI 50x5mm and 16mm dia round iron stay (interval of 1m) including nut bolt and PCC work, including dismantling/taking down old pipe complete all as specified and as directed by Engineer-in- charge.

Supply & fixing in replacement 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors all as specified & directed by Engr-in-Charge

Supply & fixing 75mm bore PVC (SWR) 'Y'/'T' junction (double/ single ), equal or unequal (any radius) suitable pipe fixed to walls or laid in floor complete all as specified and as directed by Engineer-in- charge.

Supply & fixing 75mm bore PVC (SWR) vent cowl complete all as specified and as directed by Engineer-in- charge.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames, wooden/PVC doors/steel ventilator) area not exceeding 1.50 sqm each and removing from site including cutting holes for removal of old rusted hold fast and prepare the surface for new hold fast complete all as specified and as directed by Engineer-in- charge.

Supply and fixed solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and as directed by Engineer-in-Charge

Supply and fixed factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing, complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing 75mm long stainless steel butt hinges heavy duty complete all as specified & directed by Engineer-in-charge.

Supply and fixing anodised aluminium handle cast type 125mm long complete all as specified & directed by Engineer-in-charge.

Supply and fixing aluminium anodised barrel tower bolt of extruded section, 150mm long complete all as specified & directed by Engineer-in-charge.

Hacking out old broken glass from metal frame of any thickness incl punching or drilling out old glazing pins/springs clips all as specified and directed

Supply and fixing sheet glass 3.00 mm thick ordinary quality ,fixing with oil putty to wooden or steel surface n.exc 0.5 sqm each complete all as specified and directed

Supply & Fixing figured glass pin head type and glazingwith oil putty in square n.exc 0.5 sqm in each pane of 3 mm thick complete all as specified

Supply & Fixing in repairs CP brass concealed stop cock with long shank and cup including cutting of dado terrazo/tiles surfaces and making good with new materials complete to match with the existing surface complete all as specified and directed by Engineer-in-Charge.

Material and labour for cutting holes into or through brick wall built in cement mortor and making good in PCC 1:2:4 B-1 as required super facial area not exceeding 150 Sqcm for fixing of brackets for wash basin and sink.

Supply & Fixing in repairs CI floor/nahani traps 100x75mm dia outlet including making good disturbed surfaces to match with existing finish complete all as specified.

Material and labour for cutting the existing concrete including terrazo around nahani/floor trap exc 25cm and not exceeding 35cm in depth and laying of RCC 1:2:4 unding 12.5 mm graded aggregate with WPC @ 3% by weight of cement all as specified. Note : Cost of WPC shall be deemed to be included in the unit rate quoted by tender for the above item.

Ajay Enterprises

M/s Vandana Builders

NAIB ENTERPRISES

M/s Goyal Builders

M/S SAI BUILDERS

P K BANSAL CONTRACTOR

Lovneesh Jindal Contractor