8475 REPAIR REPLACEMENT AND MAINTENANCE TO CEILING FAN GEYSER INTERNAL ELECTRIFICATION DBS AND MCBS SWITCHES SOCKETS LIGHT FITTINGS AND FIXTURES OTHER MISCELLANEOUS ELECTRICAL WORK IN THE CH COMPLEX CMDC RF LINE MI LINE UNDER AGE E/M I OF GE SOUTH

Amount

M&L for attending emergent complaints i.e No light / ceiling fan / exhaust fan / geysers/ security light/ ceiling and wall light / Cable fault of any size & type / earth leakage/ short circuit / neutral break mains / substations / internal circuits of existing system and ensure un-interrupted continuous electric supply including carrying out minor repairs etc as required to Make the system in order / functional including replacing fuse wire , small pieces of copper wire, copper thimbles, glands, earthing wire, complete all as directed by Engr-In-charge. Note : (i) The cost of fuse wire, small pieces of copper wire, copper thimbles, glands, earthing wire shall be deemed to be included in unit quoted rates. (ii) Attending two numbers of complaint and making these functional in all respect shall be measured as One Job.

Taking down carefully existing unserviceable aluminium point wiring (light, fan, socket or power), complete fitting such as switches, ceiling rose, pendent, regulators etc removing material to store for keeping in safe custody or for taking on credit and making good the disturbed surfaces of wall, floor etc. complete all as specified and as directed.

M & L for Point wiring using approved colour coding as per IS, with multi-stranded copper conductor 1.5 Sqmm (nominal area), single core, PVC insulated and unsheathed FRLS cable 1100 volts grade, ISI-694 marked drawn through in and including heavy duty, PVC casing caping including all accessories etc, heavy duty ISI marked, concealed / surface mounted as per site requirement with GI box /PVC surface mounted modular box with earth dolly, covered with modular white cover plate with frame suitable for modular switches including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed for the following :- (a) One light point controlled by one, one way switch 5 Amps

(b). One fan point/ exhaust fan point controlled by one way switch 5 Amps and regulator

(c). One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board.

(d). One bell point controlled by bell switch 5 Amps

(e). One 3 point 5 Amps switch socket outlet point controlled by one switch on the same board.

All as per item No. 3 above but using 2.5 sqmm copper conductor for with 2.5 sqmm earth wire for one 6 pin 15 amps socket outlet on independent board, complete all as specified and directed.

M & L for Point wiring using approved colour coding as per IS, with multistranded copper conductor 1.5 Sq. mm (nominal area), single core, PVC insulated and unsheathed FRLS cable 1100 volts grade, ISI-694 marked drawn through in and including heavy duty, PVC casing including all accessories etc, heavy duty ISI marked, concealed / surface mounted as per site requirement including with mild steel sunken boxes / PVC surface mounted box with earth dolly duly, covered with laminated hylem sheet / PVC cover, ISI marked, suitable for fixing of switches, fan regulators and sockets including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed for the following :- (a) One light point controlled by one, one way switches 5 Amps

One fan point/ exhaust fan point controlled by one, one way switch 5 Amps

(b). One light point controlled by two way switches 5 Amps.

(c). One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent boad.

(d). One bell point controlled by bell switch 5 Amps

(e). One 3 point 5 Amps switch socket outlet point controlled by one switch on the same board.

All as per item No.9 above but using 2.5 sqmm copper conductor for with 2.5 sqmm earth wire for one 6 pin 15 amps socket outlet on independent board, complete all as specified and directed.

S & F for Modular Switch piano flush type, single pole, one way, and 6 Amp single module complete all as specified and directed.

S & F for Modular Switch piano flush type, single pole, one way, and 16 Amp single module complete all as specified and directed.

S & F for Modular Socket outlet multipurpose having provision for 3 pin, 6 Amp and 2 pin, 6 Amp, 2 modules piano flush type complete all as specified and directed.

S & F for Modular Switch Socket outlet multipurpose having provision for 3 pin, 16 Amp and 3 pin, 6 Amp, 2 module piano flush type complete all as specified and directed.

S & F for modular step type fan regulator 120 watt 2 module suitable for 230 volt 50 Hz AC supply complete all as specified and as directed.

S & F for for bell push modular 6 Amps single module complete all as specified and directed.

S&F Bell Push flush type 5 Amps, 240 volts complete all as specified and directed.

Suply and fix in repairs bell electric ding dong type suitable for operation on 230 volt 50 HZ A C supply complete all as specified and as directed

M & L for Fix lamp holder insulated body with back plate PVC/Polycarbonate type with cord grip cap, angular type fixed on wall with and including 9 watt LED lamp complete all as specified and directed.

S&F ceiling rose surface bakelite 65 mm x 50 mm two to three terminals complete all as specified and as directed.

S & F switch piano flush button type 6 Amp single pole one way complete all as specified and as directed.

S & F switch piano flush button type 16 Amp single pole two way complete all as specified and as directed.

S & F switch piano flush button type 15 Amp single pole one way complete all as specified and as directed.

S & F socket outlet 5 pin, 6 Amp flush type multipurpose complete all as specified and as directed.

S & F socket outlet 2 in 1, 3/6 pin, 6 Amp and 15 Amp multipurpose flush type complete all as specified and as directed.

Supply and Fix in repair LED security light 25 Watts in aluminium housing with glass cover with suitable dia and length GI pipe (Medium grade) bend to shape existing including taking down existing any type of security light complete all as specified and directed. Make -Crompton cat no - LSTS-25-CDL or equivalent cat part in makes as mentioned here-in-after.

Supply and Fix in repair LED security light 30 Watts in aluminium housing with glass cover with suitable dia and length GI pipe (Medium grade) bend to shape existing including taking down existing any type of security light complete all as specified and directed. Make -Crompton cat no - LSTS-30-CDL or equivalent cat part in makes as mentioned here-in-after.

S&F in replacement post top lantern, 50 Watts including taking down existing any type of fitting complete all as specified and as directed. [Make - HAVELLS cat no - RUBYMAXIPT50WLED757PSYMTOPC or equivalent cat part in makes as mentioned here-in-after.

S&F in replacement post top lantern 35 to 45 watts including taking down existing any type of fitting complete all as specified and as directed by Engr-In-charge. [Make - HAVELLS cat no - CORALPT35WLED757PSYMTOPC or equivalent cat part in makes as mentioned here-in-after.

Supply and Fix in replacement MCCB 63/100 Amps, 16 KA, 4 Pole, 415V, thermal magnetic adjustable of overload & short circuit release as per IS-13947 & IEC 60947-2 & the service short circuit breaking capacity (Ics) should be equal to ultimate breaking capacity (Icu), complete all as specified and as directed. Make:- L&T or equivalent in Legrand /ABB / Schenider / L&T

Supply and Fix in replacement MCCB 125 Amps, 16 KA, 4 Pole, 415V, thermal magnetic adjustable of overload & short circuit release as per IS-13947 & IEC 60947-2 & the service short circuit breaking capacity (Ics) should be equal to ultimate breaking capacity (Icu), complete all as specified and as directed. Make:- L&T or equivalent in Legrand /ABB / Schenider / L&T

Supply and Fix in replacement MCCB 160 Amps, 25 KA, 4 Pole, 415V, thermal magnetic adjustable of overload & short circuit release as per IS-13947 & IEC 60947-2 & the service short circuit breaking capacity (Ics) should be equal to ultimate breaking capacity (Icu), complete all as specified and as directed. Make:- L&T or equivalent in Legrand /ABB / Schenider / L&T

Supply and Fix in replacement MCCB 200 Amps, 36 KA, 4 Pole, 415V, thermal magnetic adjustable of overload & short circuit release as per IS-13947 & IEC 60947-2 & the service short circuit breaking capacity (Ics) should be equal to ultimate breaking capacity (Icu), complete all as specified and as directed. Make:- L&T or equivalent in Legrand /ABB / Schenider / L&T

Supply and Fix in replacement MCCB 250 Amps, 36 KA, 4 Pole, 415V, thermal magnetic adjustable of overload & short circuit release as per IS-13947 & IEC 60947-2 & the service short circuit breaking capacity (Ics) should be equal to ultimate breaking capacity (Icu), complete all as specified and as directed. Make:- L&T or equivalent in Legrand /ABB / Schenider / L&T

Supply and Fix in replacement MCCB 400 Amps, 36 KA, 4 Pole, 415V, thermal magnetic adjustable of overload & short circuit release as per IS-13947 & IEC 60947-2 & the service short circuit breaking capacity (Ics) should be equal to ultimate breaking capacity (Icu), complete all as specified and as directed. Make:- L&T or equivalent in Legrand /ABB / Schenider / L&T

S & F sheet metal enclosure, single pole and neutral with a two pin and earth plug and socket complete with one single pole MCB 20 Amp, 240 volts, concealed / surface on wall as per site requirement including all cutting holes in or through walls, making good the disturbed surfaces of walls, ceiling etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing complete all as specified and directed.

S & F sheet metal enclosure, triple pole and neutral with a two pin and earth plug and socket complete with one triple pole MCB 32 Amp, 240 volts, concealed / surface on wall as per site requirement including all cutting holes in or through walls, making good the disturbed surfaces of walls, ceiling etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing complete all as specified and directed.

M & L for earthing complete with galvanised steel earth plate electrode 60cm × 60cm × 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below normal ground level with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised iron wire of 6mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel earth wire protected by provision of GI 'medium grade' pipe 15mm bore including provision of concrete pit in PCC (1:2:4) type B1 (using 20mm graded stone aggregate) with 40mm thick cover in RCC (1:2:4) type B-1 reinforced with XPM (weight not less than 4 kg/sqm) and frame made out in MS angle iron of size 25x25x3mm with lugs 02 Nos. and with MS handle made in 6mm dia round bar made to shape, including GI 'medium grade' 20mm bore pipe for watering, perforated at bottom 1.75m long placed on top edge of earth plate including provision of mixture of charcoal dust & common salt packed up to minimum 150 mm all around the earth plate, test point made out of phosphorus bronze with fixing arrangement, funnel, wire mesh including necessary excavation and earth work in any type of strata, returning filling in and removal of surplus soil to a distance not exceeding 50mtr complete all as shown in electrical plate No. 3 of SSR Part I 2009 connected to earthing test point including testing on completion, complete all as specified and directed. NOTE: -6mm dia GI wire and GI pipe 15mm bore medium grade for encasing GI strip up to 7.50m length per earthing shall be deemed to be included in the unit rate.

M & L for earthing complete with galvanised steel earth plate electrode 60cm × 60cm × 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below normal ground level with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised iron strip 32x6mm by means of bolts, nuts, check nuts and washers of galvanised iron or steel earth strip protected by provision of GI 'medium grade' pipe 40mm bore including provision of concrete pit in PCC (1:2:4) type B1 (using 20mm graded stone aggregate) with 40mm thick cover in RCC (1:2:4) type B-1 reinforced with XPM (weight not less than 4 kg/sqm) and frame made out in MS angle iron of size 25x25x3mm with lugs 02 Nos and with MS handle made in 6mm dia round bar made to shape, including GI 'medium grade' 20mm bore pipe for watering, perforated at bottom 1.75m long placed on top edge of earth plate including provision of mixture of charcoal dust & common salt packed up to minimum 150 mm all around the earth plate, test point made out of phosphorus bronze with fixing arrangement ,funnel, wire mesh including necessary excavation and earth work in any type of strata, returning filling in and removal of surplus soil to a distance not exceeding 50mtr complete all as shown in electrical plate No. 3 of SSR Part I 2009 connected to earthing test point including testing on completion, complete all as specified and directed. NOTE: -32x6mm size GI strip and GI pipe 40mm bore medium grade for encasing GI strip up to 7.50m length per earthing shall be deemed to be included in the unit rate.

Supply, installation, commissioning and testing of chemical earthing for GI pipes one inside the other with proper galvanization. The outer dia shall be 88 mm & inner dia shall be 48 mm and the cavity filled with highly conductive, non-corrosive material including additional copper coating on the outer surface including supply of fast electrode earth enhancement compound (2 bags of 25 Kg each) which is highly hygroscopic, non-corrosive & good PH value certified by NABL approved lab and including copper earth plate of size 900x600x5 mm and copper earth strip 32x6 mm (including with nuts, bolts & check nuts) and riveted to earth electrode at one end and connected to metallic bodies of equipment etc at the other, earth strip encased in and including 40mm bore GI medium grade pipe including with all fittings & fixtures from top of electrode to body of equipment fixed with and including 40 x 6mm flat iron clamps, bolts, nuts and washer etc complete with and including earth pit in PCC 1:2:4 type B-O using 12.5 mm graded crushed stone aggregate, RCC cover, funnel, wire mesh including necessary excavation and earth work in any type of strata etc including testing on completion, complete all as specified and directed. Note : 1. The earthing result should not be less than 1 ohm and all testing equipment shall be provided by contractor on no any extra cost to the Govt.

S&F 32x6 mm size GI strip as in earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in to conduit / pipe or fixed to poles or any other indicated situation for loop earthing etc as required for, complete all as specified and directed.

S&F 6mm dia earth continuity conductor or main earth lead fixed to wall or buried in ground or drawn in GI pipe, complete all as specified and directed.

S&F in replacement MCB SP 6-40 Amps, 10 KA, 'C' series complete all as specified and as directed.

S&F in replacement MCB SPN 20-40 Amps, 10 KA, 240V, 'C' series complete all as specified and as directed.

S&F in replacement MCB TP 40/63 Amps, 10KA, 415 V, 'C' series complete all as specified and as directed.

S&F in replacement MCB TPN 40/63 Amps,10 KA, 415V, 'C' series complete all as specified and as directed.

S&F in replacement of 18 watt, 230V surface and wall mounted LED batten, extruded aluminium housing with polycarbonate diffuser and integrated electronic driver including making connection with twin core twisted flexible copper conductor cable from ceiling rose complete all as specified and directed. (Make :-HALONIX CAT NO HLTLD-04-18-CW or equivalent cat part in makes as mentioned here-in-after.

S&F in replacement LED panel recess mounted 2'x2', 36 watts light fitting with heat exchanger unit complete including cutting hole of required size in POP / false ceiling and making good disturbed surfaces as per existing surface including taking down any type ceiling fitting, complete all as specified and directed. Make - HALONIX CAT NO HLFPR22-07-36-CWL-R or equivalent cat part in makes as mentioned here-in-after

S&F in replacement LED batten Neptune silver tube light fitting complete with all fitting and fixing accessories, 4 Feet, 1X20 Watt pre-wired with high efficiency electronic driver, glare free, smooth light distribution conforming to HALONIX CAT Part No.HLB-08-20-CW-IP or equivalent cat part in makes as mentioned here-in-after complete all as specified and directed.

Supply & fix in replacement 15 Amps plug top and making connection complete all as specified and as directed by Engr-in-Charge.

S&F in replacement LED PL Lamp 18 watt 4 pin indoor decorative LED extruded aluminium (powder coated) anodized with opal diffuser, 2G11 pin, IP20 suitable for existing fitting including taking down of existing unsearchable fitting complete all as specified and directed. Make :- Halonix-HLL-01-18-CW or equivalent cat part in makes as mentioned here-in-after

S&F in replacement LED PL Lamp 10 watt 4 pin indoor decorative LED extruded aluminium (powder coated) anodized with opal diffuser, 2G11 pin, IP20 suitable for existing fitting including taking down existing unserviceable fittings, complete all as specified and directed. Make :- Halonix-HLL-01-10-CW or equivalent cat part in makes as mentioned here-in-after.

S&F in replacement LED recess mounting down lighter 12 watt with LED backlit round down lighter made of PDC AL with high efficient LEDs & glare free opal diffuser, IP20 including taking down of existing unserviceable fitting complete all as specified and directed. Make :- Halonix-HLDLR-31-12-CW or equivalent cat part in makes as mentioned here-in-after

S&F in replacement driver suitable for LED fitting 10 to 35 watts of the existing make including making connection etc. complete all as directed by Engr-in-Charge.

S&F in replacement driver suitable for LED pannel recess mounted 2'x2' 50 watts of the existing make including making connection etc. complete all as directed by Engr-in-Charge.

S&F in replacement chock electronic ballast SLIM TYPE 36/40 watt commercial type fixed in existing fitting complete all as directed by Engr-in-Charge. Make :- Bajaj / WIPRO / Philips

Supply & fix in repair Chock electronic Ballast SLIM TYPE18/20 watt commercial type fixed in existing fitting complete all as specified and directed by Engr-in-Charge. (Make :- Bajaj / WIPRO /philips)

S&F in replacement driver suitable for LED fitting 60 to 90 Watts of the existing make including making connection complete all as directed by Engr-in-Charge.

S&F in replacement driver suitable for LED fitting 60 to 90 Watts of the existing make including making connection complete all as directed by Engr-in-Charge.

S&F in replacement IP-43, protection metal double door Vertical TPN -DB rated bus bar, 415 volts, 50 HZ complete with interconnection links, blanking plates, cable ties, identification labels TPN 4 way, 12 modules suitable for accommodating 100 Amps MCCB 4 pole as incomer and SP/TP MCB as outgoing and concealed /surface on wall as per site requirement including all cutting holes in or through walls, making good to walls, ceiling etc. including two coats of white / colour washing / distempering etc. to the disturbed surfaces to match the existing complete all as specified and directed. Make - Legrand / ABB/L&T/ Schenider. Note- MCCB 100 Amps 4 pole 16 KA as incomer will be measured and paid separately under respective items of BOQ.

S&F in replacement IP-43, protection metal double door Vertical TPN -DB rated bus bar, 415 volts, 50 HZ complete with interconnection links, blanking plates, cable ties, identification labels TPN 8 way, 24 modules suitable for accommodating 100 Amps MCCB 4 pole as incomer and SP/TP MCB as outgoing and concealed /surface on wall as per site requirement including all cutting holes in or through walls, making good to walls, ceiling etc. including two coats of white / colour washing / distempering etc. to the disturbed surfaces to match the existing complete all as specified and directed. Make - Legrand / ABB/L&T/ Schenider. Note- MCCB 100 Amps 4 pole 16 KA as incomer will be measured and paid separately under respective items of BOQ.

S&F in replacement IP-43, protection metal double door Vertical TPN -DB rated bus bar, 415 volts, 50 HZ complete with interconnection links, blanking plates, cable ties, identification labels TPN 12 way, 36 modules suitable for accommodating 160 Amps MCCB 4 pole as incomer and SP/TP MCB as outgoing and concealed /surface on wall as per site requirement including all cutting holes in or through walls, making good to walls, ceiling etc. including two coats of white / colour washing / distempering etc. to the disturbed surfaces to match the existing complete all as specified and directed. Make - Legrand / ABB/L&T/ Schenider. Note- MCCB 160 Amps 4 pole 16 KA as incomer will be measured and paid separately under respective items of BOQ.

S&F in replacement IP-43, protection metal double door Vertical TPN -DB rated bus bar, 415 volts, 50 HZ complete with interconnection links, blanking plates, cable ties, identification labels TPN 4 Way of , 10 modules suitable for accommodating up to 40 nos SP/ TP/ TPN MCB as Incoming / outgoing and concealed /surface on wall as per site requirement including all cutting holes in or through walls, making good to walls, ceiling etc. including two coats of white / colour washing / distempering etc. to the disturbed surfaces to match the existing complete all as specified and directed. Make -Legrand / ABB/L&T/ Schenider

S&F in replacement IP-43, MCB DB 4 way, double door, with 100 amp rated bus bar 240 V, SPN concealed / surface on wall as directed by Engr-in-charge including all cutting holes in or through walls, making good to walls, ceiling etc. including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing complete all as specified and directed. (Make- Legrand or equivalent in ABB/L&T/ Schenider)

S&F in replacement IP-43, MCB DB 8 way, double door, with 100 amp rated bus bar 240 V, SPN concealed / surface on wall as directed by Engr-in-charge including all cutting holes in or through walls, making good to walls, ceiling etc. including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing complete all as specified and directed. (Make- Legrand or equivalent in ABB/L&T/ Schenider)

S&F in replacement IP-43, MCB DB 12 way, double door, with 100 amp rated bus bar 240 V, SPN concealed / surface on wall as directed by Engr-in-charge including all cutting holes in or through walls, making good to walls, ceiling etc. including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing complete all as specified and directed. (Make- Legrand or equivalent in ABB/L&T/ Schenider)

M & L for Sub main wiring with approved colour coding as per IS with four single core PVC insulated FRLS cable with stranded copper conductor cable of size with 10 Sqmm , 1100 Volts grade, stranded, PVC insulated, unsheathed, copper conductor FRLS- confirming to IS: 694-1990 with and including continuous earth wire of size 1x10 Sqmm nominal cross sectional area, single core, PVC insulated, copper conductor cable drawing into and including rigid non-metallic PVC rigid heavy duty PVC conduit of white/ ivory colour and all accessories, ISI marked of suitable size concealed in wall etc and connected to common earth dolly including all cutting / chases etc. in any type of wall, making good the disturbed surfaces of walls as per existing finish etc complete all as specified and directed. Note:- (i) Four runs of 10 sqmm copper conductor cable, one run of 10 sqmm copper conductor cable cable as in earth continuity conductor and one run of PVC conduit shall be measured as one unit length.

M & L for Sub main wiring with approved colour coding as per IS with four single core PVC insulated FRLS cable with stranded copper conductor cable of size with 6 Sqmm , 1100 Volts grade, stranded, PVC insulated, unsheathed, copper conductor FRLS- confirming to IS: 694-1990 with and including continuous earth wire of size 1x6 Sqmm nominal cross sectional area, single core, PVC insulated, copper conductor cable drawing into and including rigid non-metallic PVC rigid heavy duty PVC conduit of white/ ivory colour and all accessories, ISI marked of suitable size concealed in wall etc and connected to common earth dolly including all cutting / chases etc. in any type of wall, making good the disturbed surfaces of walls as per existing finish etc complete all as specified and directed. Note:- (i) Four runs of 6 sqmm copper conductor cable, one run of 6 sqmm copper conductor cable cable as in earth continuity conductor and one run of PVC conduit shall be measured as one unit length.

M & L for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLS cable with stranded copper conductor cable of size with 6 Sqmm , 1100 Volts grade, stranded, PVC insulated, unsheathed, copper conductor FRLS- confirming to IS: 694-1990 with and including continuous earth wire of size 1x6 Sqmm nominal cross sectional area, single core, PVC insulated, copper conductor cable drawing into and including rigid non-metallic PVC rigid heavy duty PVC conduit of white/ ivory colour and all accessories, ISI marked of suitable size concealed in wall etc and connected to common earth dolly including all cutting / chases etc. in any type of wall, making good the disturbed surfaces of walls as per existing finish etc complete all as specified and directed. Note:- (i) Two runs of 6 sqmm copper conductor cable, one run of 6 sqmm copper conductor cable cable as in earth continuity conductor and one run of PVC conduit shall be measured as one unit length.

M & L for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLS cable with stranded copper conductor cable of size with 4 Sqmm , 1100 Volts grade, stranded, PVC insulated, unsheathed, copper conductor FRLS- confirming to IS: 694-1990 with and including continuous earth wire of size 1x4 Sqmm nominal cross sectional area, single core, PVC insulated, copper conductor cable drawing into and including rigid non-metallic PVC rigid heavy duty PVC conduit of white/ ivory colour and all accessories, ISI marked of suitable size concealed in wall etc and connected to common earth dolly including all cutting / chases etc. in any type of wall, making good the disturbed surfaces of walls as per existing finish etc complete all as specified and directed. Note:- (i) Two runs of 4 sqmm copper conductor cable, one run of 4 sqmm copper conductor cable cable as in earth continuity conductor and one run of PVC conduit shall be measured as one unit length.

Supply and fixing in replacement ceiling fan regulator, electronic, flush type, rotary steps, hum free, AC, 230 volts, 100 watts, complete all as specified and directed.

Supply and fixing in replacement armoured copper cable PVC insulated 3 core 4.0 Sqmm with stranded copper conductor 1100V grade complete all as specified and as directed.

Supply and fixing in replacement armoured copper cable PVC insulated single core 16.0 Sqmm with stranded copper conductor 1100V grade complete all as specified and as directed.

Supply and fixing in replacement modular Black plate with frame 2 modules complete all as specified and as directed. Make - Legrand (myrius) or as existing make

Supply and fixing in replacement modular Black plate with frame 3 modules complete all as specified and as directed. Make - Legrand (myrius) or as existing make

Supply and fixing in replacement modular Black plate with frame 4 modules complete all as specified and as directed. Make - Legrand (myrius) or as existing make

Supply and fixing in replacement fan Condenser 2.5 mfd 230 Volts complete all as specified and as directed. (Make :-Havells / Epcos/Tibcon /Siemens)

Supply and fixing in replacement fan Condenser 4 mfd 230 Volts complete all as specified and as directed. (Make :-Havells / Epcos/Tibcon /Siemens)

S&F in replacement of burnt out / unserviceable fan motor assembly complete including double bearing, copper winding with metal plate top & bottom side suitable for 1200 mm sweep of any existing make and at any location complete all as specified and as directed by Engr-in-Charge. Make :-Havells / Usha or equivalent make as per existing

Supply and replace fan blade (set of 3) suitable for 1200 mm of existing make complete all as specified and as directed by Engr-In-Charge.

Supply and fix in replacement anchor bolt & nut of 8 mm dia suitable for fixing of geyser on walls in a suitable way and making good the disturbed surfaces as per existing surfaces, complete all as specified and directed by Engr-In-Charge

Supply and fix in replacement PVC box with and including switch & socket of 06 Amps and fixed on wall complete all as directed by Engr-In-Charge

Supply and fix in replacement PVC box with and including multipurpose, 16 Amps switch & 06 / 16 Amps sockets and fixed on wall complete all as directed by Engr-In-Charge

Supply only Self adhesive PVC electrical Insulation tape 7 mtr long, ISI mark with superior quality complete all as specified and as directed by Engr-In-Charge.

Supply only the following spare parts, complete all as directed :- (a). Bearing 6200 to 6203 ZZ, Make - SKF/NBL

(b). Conductor Terminal 3 way Bakelite of existing make.

(c). Brass gun metal bushing suitable of size 1200/1400mm sweep ceiling fan.

Supply and Fix in replacement canopy suitable for ceiling fans (Set of two) complete all as specified and as directed by Engr-In-Charge.

Supply and Fix in replacement MS clamp with rubber reel, nuts, bolts, split pin etc. suitable for 1200/1400 mm sweep ceiling fan complete all as specified and as directed by Engr-In-Charge.

M&L for replacement of burnt winding by re-winding of motor's of following fans, complete with super enamelled copper wire of same guage and weight, replacement of insulation paper, varnishing, heating up and testing complete including taking down and refixing the fan at its original positions complete all as directed by Engr-in-charge :- (a). Ceiling fan 1200/1400mm sweep working on 230 volts AC supply

(b). Exhaust fan upto 250 / 300 / 450 mm sweep working on 230 volts AC supply

(c). Wall mounting fan of 230 / 450 mm size, working on 230 volts AC supply

S&F in replacement down rod, 2 feet long suitable for 1200/1400 sweep ceiling fan, made out of 15mm dia GI pipe medium grade with fan clamps including drilling cutting & threding etc complete all as directed by Enger-in-charge.

S&F in replacement down rod, 3 feet long suitable for 1200/1400 sweep ceiling fan, made out of 15mm dia GI pipe medium grade with fan clamps including drilling cutting & threding etc complete all as directed by Enger-in-charge.

S&F in replacement down rod, 4 feet long suitable for 1200/1400 sweep ceiling fan, made out of 15mm dia GI pipe medium grade with fan clamps including drilling cutting & threding etc complete all as directed by Enger-in-charge.

Taking down geysers carrying to workshop for leakage repairing, servicing, cleaning etc and replacement of thermostat, heating element, indicator lamp and thermal cut out including providing of PVC cable, sheathed, three core with stranded copper conductor of size 2.5 Sqmm and re-fixing the geysers at its original location complete all as directed by Engr-In-Charge for the following capacity of geysers:- Note:- Heating element, geyser tank, thermostat, indicator lamp & thermal cutout etc shall be measured and paid separately under respective items of BOQ as “Supply only” (a). 25 liters capacity

(b). 50 liters capacity

Supply only heating element 2 KW, 230 volt round / triangular in shape ISI marked complete all as specified and as directed by Engr-In-Charge.

Supply only heating element 1.5 KW, 230 volt round/ triangular in shape ISI marked complete all as specified and as directed by Engr-In-Charge.

Supply only steel tank suitable for 25 Ltrs capacity geyser make & size as per existing geyser, complete all as specified and as directed by Engr-In-Charge.

Supply only steel tank suitable for 50 Ltrs capacity geyser make & size as per existing geyser, complete all as specified and as directed by Engr-In-Charge.

Supply only Indicating lamp (red /green /yellow) complete suitable for 25/50/100 liters capacity geyser complete all as specified and as directed by Engr-In-Charge.

Supply only thermostat ISI marked complete suitable for 25/50 liters capacity geyser complete all as specified and as directed by Engr-In-Charge.

S&F in replacement CFL 3 pin 36 watts complete all as specified and as directed by Engr-In-Charge.

S&F in replacement CFL electronic choke 36 watts complete all as specified and as directed by Engr-In-Charge.

S&F in replacement CFL cross 4 pin 10 to 18 watts suitable for downlighter complete all as specified and as directed by Engr-In-Charge.

Supply and fixing in repairs PVC body fresh air fan 300mm sweep complete all as specified and as directed by Engr-In-Charge. (Make :- Bajaj/cromptan/Havells/Usha)

Supply and fixing in repairs PVC body fresh air fan 250mm sweep complete all as specified and as directed by Engr-In-Charge. (Make :- Bajaj/cromptan/Havells/Usha)

Supply and fixing in repairs PVC body fresh air fan 200mm sweep complete all as specified and as directed by Engr-In-Charge. (Make :- Bajaj/cromptan/Havells/Usha)

S&F in repairs PVC flexible three core copper 23/0.0076 size cable, complete all as specified and directed by Engr-In-Charge.

Supply & fix in repairs PVC connections pipe with brass hexagonal adapters both side suitable for 15mm dia pipe, 45/60cm long suitable for cold water as per site requirement complete all as specified and as directed by Engr-In-Charge.

Supply & fix in repairs PVC connections pipe with brass hexagonal adapters both side suitable for 15mm dia pipe, 45/60cm long suitable for hot water as per site requirement complete all as specified and as directed by Engr-In-Charge.

S&F in repairs cable PVC insulated 3 core 2.5 Sqmm with stranded copper conductor 1100V grade, FRLS, from socket / switch to geyser complete all as specified and as directed by Engr-In-Charge.

Supply and fix in replacement multi core flexible copper conductor PVC insulated and sheathed cables 2 core, 0.75 Sqmm , 1100 Volt grade complete all as specified and directed by Engr-In-Charge.

Supply and fix in replacement flat twin core cable, 4 Sqmm with aluminium conductor multi strand black cable as per IS 694-1990 complete all as specified and directed by Engr-In-Charge.

Supply and fix in replacement flat twin core cable, 6 Sqmm with aluminium conductor multi strand black cable as per IS 694-1990 complete all as specified and directed by Engr-In-Charge.

RELIABLE ENTERPRISES

PROLINK COMPUTERS

Anand Trading Co

ANUSHKA BUILDERS