Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹9.2 LAccepted-AOC SHAMSHU COMPLEX FORT ROAD LEH LADAKH 194101 | LEH | LEH | LADAKH | 194101 | L1 | Accepted-AOC lowest bidder | |
| 2 | L2₹9.8 L+₹60,259.90 (6.53%)Rejected-AOC 58 3 JUTOGH CANTT SHIMLA 08 HP | SHIMLA | HIMACHAL PRADESH | 171001 | L2 | Rejected-AOC Other than lowest bidder |
Tender Value
₹9.8 L
EMD Value
₹19,600
Closing Date
29 Dec 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
AGE (I) Nimu
AGE (I) Nimu Pin 901312 C/o 56 APO
CERTAIN BUILDING REPAIR WORKS AT NURLA STATION UNDER AGE(I) NIMU
2022_MES_517168_5
AGE(I)/NIT-05/2022-23
Open Tender
Civil Works
Item Rate
180 days
Nurla
Class E, Cat a(i)
8 documents required · 8 mandatory
₹500
Yes
AGE (I) Nimu
₹19,600
Yes
11 Feb 2023
26 Nov 2022
5 Jan 2023
26 Nov 2022
29 Dec 2022
10 Dec 2022
Amount
Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, roof coverings & wall complete and all as specified and directed byEngr-in-charge.
0.63mm thick Galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with 'L' type or 'J' type or cranked hook bolts in lieu of screws and washers, in roofs, walls etc. with grade of zinc coating 275. complete and all as specified and directed byEngr-in-charge.
0.80mm thick Plain, Galvanised, mild steel sheeting in ridges, hips, valley gutters straight flashings and etc (length and girth as fixed) with grade of zinc coating 275. complete all as specified and directed by Engr-in-charge.
Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and directed by Engr-in-charge.
All as per item No 04 here-in-before but plain steel sheet
2mm thick fibre glass reinforced translucent fixed in Al or wooden frame using nessesery fixing arragement. all as specified and directed by Engr-in-charge.
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete and all as specified and directed byEngr-in-charge.
Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beams, tee, angle, channel or flat sections) including distance piece, cleats etc Fe 410-W (Gde - E - 250) Quality 'A'.all as specified and directed by Engr-in-charge.
Dismantling timber scantling 40 sqcm and over in section, in any position in unframed work as in rafter, purlins etc complete and all as specified and directed byEngr-in-charge.
Second class soft wood in clean sawn timber fixed in scantlings as in purlins, rafters etc complete and all as specified and directed byEngr-in-charge.
Applying two coats of synthetic enamel painting to new surfaces steel based over a coat of red oxide primer exc. 10 cm width/girth including preparation of surfaces including filling with filler where reqd all as specified and directed.
Applying two coats of synthetic enamel painting to old surfaces steel based exc. 10 cm width/girth including preparation of surfaces including filling with filler where reqd all as specified and directed
Dismantling floor, hearth or wall tiling incl cement mortar bedding (but not backing), removing and rubbish off the premises deposited in low laying area all as specified and directed by Engr-in-charge.
Non skid coloured Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick sreed bedding layer in CM 1:4 and all as specified and directed by Engr-in-charge.
Non skid coloured Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick sreed bedding layer in CM 1:4 and all as specified and directed by Engr-in-charge.
Non skid coloured Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick sreed bedding layer in CM 1:4 all as specified and directed by Engr-in-charge.
Glazed coloured ceramic tiles as in vertical surface Size 350x250x7mm/450x300mmx7mm thick such as skirting, dado, etc set and jointed in neat cement slurry and pointed in White or coloured cement to match the shade of tiles incl 10mm thick plastering in CM 1:3 all as specified and directed by Engr-in-charge.
Dismantling stone slabs and tiles of any description or thickness in floors approns etc, laid bedded and pointed in any mortar complete and all as specified and directed byEngr-in-charge.
Granite (of Any Type) Tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including griding and polishing type , incl15mm thick sreed bedding layer in CM 1:4, complite all as specified and as directed by Engr-in-charge.
TMT bars 10mm dia and over, cut to length, bent to shape required including cranking , bending spirally for hooping for columns, hooking ends, binding with and including mild steel wire (annealed ) not less than 0.9mm dia, complete all as specified and directed by Engr-in-Charge.
TMT bars of 6 and incl 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends, binding with and including mild steel wire (annealed ) not less than 0.9mm dia, complete all as specified and directed by Engr-in-Charge.
Reinforced cement concrete, type B-1,1:2:4 (using 20mm graded crushed stone aggreagate) as in manhole cover set in cement mortor 1:4, complete all as specified and directed by Engr-in-Charge.
Use & waste form work to soffits of suspended slabs, such as roof slabs, landings and similar work not exceeding 200 mm thick with rough finished flat surfaces of concrete, complete all as specified and directed by Engr-in-Charge.
RCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, complete all as specified and directed by Engr-in-Charge.
Demolition of RCC of any description and in any position, complete all as specified and directed by Engr-in-Charge.
Demolition of Cement Concrete in ground floors and pavings n exc 15cm thickness un-reinforced (below or above ground level) complete and all as specified and directed byEngr-in-charge.
75mm thick Cement concrete (1:4:8) type D-2 (using 40mm graded stone aggregate) as in sub-base in floor finishes, complete all as specified and directed by Engr-in-charge.
75mm thick PCC 1:3:6 type C-2 as in plinth protection and paving, complete all as specified and directed by Engr-in-charge.
40mm thick PCC 1:2:4 type B-1 (20mm graded aggregate) as in floor and paving, complete all as specified and directed by Engr-in-charge.
Taking down Chowkhats or frames exc 1.5 Sqm but not exc. 4 sq. m each (without taking off shutters from the frames), complete all as specified and directed by Engr-in-charge.
Taking down Chowkhats or frames n.exc 1.5 Sqm (without taking off shutters from the frames), complete all as specified and directed by Engr-in-charge.
Taking down Shutter of any description not exc 1 sqm each, complete all as specified and directed by Engr-in-charge.
Taking down Shutter of any description but exc 1 sqm but n exc 2 sqm each, complete all as specified and directed by Engr-in-charge.
2nd class softwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed all as specified and directed by Engr-in-charge.
2nd class softwood 35mm thick Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats for doors, complete all as specified and directed by Engr-in-charge.
2nd class softwood 30mm thick Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats for doors, complete all as specified and directed by Engr-in-charge.
Mild steel 100mm long Butt hinges, medium weight, cold rolled mild steel, and fixed, complete all as specified and directed by Engr-in-charge.
Extruded aluminium alloy handle, fabricated type, anodised 150mm long, complete all as specified and directed by Engr-in-charge.
Mild steel 100mm long Butt hinges, medium weight, cold rolled mild steel, and fixed in repair, complete all as specified and directed by Engr-in-charge.
Extruded aluminium alloy handles, fabricated type, anodised 150mm long fixed in repair, complete all as specified and directed by Engr-in-charge.
Aluminium alloy, anodised, sliding door bolt 300mm size with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast alumimnium alloy and fixed, complete all as specified and directed by Engr-in-charge.
Aluminium alloy, anodised, sliding door bolt 300mm size with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast alumimnium alloy and fixed in repair complete and all as specified and directed byEngr-in-charge.
Aluminium anodised, barrel tower bolt of extruded section and fixed, 150mm long (ISI marked), complete all as specified and directed by Engr-in-charge.
Aluminium anodised, barrel tower bolt of extruded section and fixed, 150mm long (ISI marked) fixed in repair, complete all as specified and directed by Engr-in-charge.
2nd class softwood 30mm thick glazed and skeleton shutters open rebated and prepare to receive glass, gauge etc divided in squares with plain chamfered or rounded, mitered and rebated with sash bars and provided in windows, ventilators and stiles and rails size of members of shutter as specified in SSR Pt-I Sec 8 clause 8.24(b) supplied and fitted to chowkats, complete all as specified and directed by Engr-in-charge.
Butt hinges, medium weight, cold rolled, mild steel 75mm long (ISI marked), complete all as specified and directed by Engr-in-charge.
Butt hinges, medium weight, cold rolled, mild steel 75mm long (ISI marked) and fixed in repair, complete all as specified and directed by Engr-in-charge.
Aluminium anodised, barrel tower bolt of extruded section and fixed, 100mm long (ISI marked), complete all as specified and directed by Engr-in-charge.
Aluminium anodised, barrel tower bolt of extruded section and fixed, 100mm long (ISI marked),and fixed in repair, complete all as specified and directed by Engr-in-charge.
Extruded aluminium alloy handle, fabricated type 'D', anodised, 100mm long (ISI marked), complete all as specified and directed by Engr-in-charge.
Extruded aluminium alloy handle, fabricated type 'D', anodised, 100mm long (ISI marked), and fixed in repair complete all as specified.
3mm thick sheet glass, ordinary quality and glazing with wooden beading in squares n exc 0.5 sq. m in each pane, complete all as specified and directed by Engr-in-charge.
3mm thick pin head type (figured glass)and glazing with oil putty and wooden beads, in squares n exc 0.5 sq. m in each pane complete and all as specified and directed byEngr-in-charge.
3mm thick sheet glass, ordinary quality and glazing with wooden beading in squares n exc 0.5 sq. m in each pane and fixed in repair all as specified and directed by Engr-in-charge.
6mm thick Toughened glass, fixed in aluminium/woden frame work with nesserry arragement and fixed in repair all as specified and directed by Engr-in-charge.
Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire stapples all as specified and directed by Engr-in-charge.
Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire stapples and fixed in repair all as specified and directed by Engr-in-charge.
Applying two coats of synthetic enamel painting to new surfaces wooden based over a coat of pink primer exc. 10 cm width/girth including preparation of surfaces including filling with filler where required all as specified and directed by Engr-in-charge.
Applying one coat of synthetic enamel painting to old surfaces wooden based exc. 10 cm width/girth including preparation of surfaces where reqd all as specified and directed by Engr-in-charge.
Aluminium die cast body door closer hydraulically designation No 3 universal type suitable for door shutter of 851 to 1000mm in width and weight 61 to 80 kg, all as specified and directed by Engr-in-charge.
S&F in repair Aluminium die cast body door closer hydraulically designation No 3 universal type suitable for door shutter of 851 to 1000mm in width and weight 61 to 80 kg.all as specified and directed by Engr-in-charge.
Demolition wall and ceiling boards (fibre,pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness including cover fillets, complete and all as specified and directed byEngr-in-charge.
9mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with nails to timber frame work as in walls all as specified and directed by Engr-in crage.
9mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with nails to timber frame work as in Ceilling complete and all as specified and directed byEngr-in-charge.
S & F in repair anoidised Aluminium with powder coating frame work for inserting toughen glass or laminated bourd /window/ventilator shutters fixed type with out sash bar al section including necessary joining cleats,glzing clips,rubber paking anodised aluminium snap beading,screws etc all as directed by Engineer-in-charge
Dismantling timber scantling as in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section in any position as in unframed work.
Plain fillets. exc. 13 and n.exc 25 Sq cm as in square, rectangular or triangular in section, clean sawn, secured with nails or brads.all as specified and directed by Engr-in-charge.
All as per item No 67 here in before but exc 3 & n.exc 6 Sq cm in bullnosed, splayed, chamfered or rounded on one or both edges or face as in beading all as specified and directed by Engr-in-charge.
Demolition in precast cement concrete walling built in cement mortor including all quoins, arches, pillars, etc all as specified.
PCC 1:3:6 type C1 using 20mm graded crushed stone aggregate ) block masonry with solid block exc 10cm in width and set as in wall etc in CM 1:4 complete all as specified and directed by EIC.
Rendering 10mm thick plaster on fair faces of brickwork or concrete surfaces in cement mortar (1:6) and finished even and smooth without using extra cement all as specified and directed by Engr-in-charge.
Preparing new plastered surfaces of walls and applying three coats of white wash on walls all as specified and directed by Engr-in-charge.
Taking down cement plaster of any description all as specified and directed by Engr-in-charge.
Preparing new plastered surfaces of walls and applying two coat oil bound distemper on walls all as specified and directed by Engr-in-charge.
Rendering 12mm thick on fair faces of brickwork or concrete surfaces in cement mortar (1:4) and finished even and fair without using extra cement all as specified and directed by Engr-in-charge.
Preparing new plastered surfaces of walls and applying two coats of cement base paint over a coat of primer all as specified and directed by Engr-in-charge.
Dismantling water tanks upto 500 litres capacity.
500 ltrs capacity Rotational moulded polythene water storage tanks (cylindrical vertical with closed top, two layers) hoisted and fixed in position complete all as specified.
Dismantling water tanks exc 500 & n.exc 1000 litres capacity.
1000 ltrs capacity Rotational moulded polythene water storage tanks (cylindrical vertical with closed top, two layers) hoisted and fixed in position complete all as specified.
25mm dia nipple suitable for water tank complete and all as specified and directed byEngr-in-charge.
Taking up/down 20mm bore old tubing on walls and connection complete all as specified and as directed.
Taking up/down 25 to 32mm bore old tubing on walls and connection complete all as specified and as directed.
20mm bore 3-layer PP-R Polypropylene random copolymer) pipes SDR 7.4 & SDR 11 UV stablised and antimicrobial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc.all as specified and directed by Engr-in-charge.
25mm bore 3-layer PP-R Polypropylene random copolymer) pipes SDR 7.4 & SDR 11 UV stablised and antimicrobial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc.all as specified and directed by Engr-in-charge.
32mm bore 3-layer PP-R Polypropylene random copolymer) pipes SDR 7.4 & SDR 11 UV stablised and antimicrobial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc.all as specified and directed by Engr-in-charge.
25mm Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed in repair all as specified and directed by Engr-in-charge.
S&F in repair 25mm Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed all as specified and directed by Engr-in-charge.
S&F in repair 15mm dia Pillar taps cast copper alloy, fancy type with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed fancy type all as specified and directed by Engr-in-charge.
PVC connection of 300mm long in repair all as specified and directed by Engr-in-charge.
M & L in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long all as specified and directed by Engr-in-charge.
S&F in repair 20mm dia CP single towel rail 600mm long D type incl a pair brackets fixed to wall complete all as specified
S & F in repair brass chromium plated shower roses 125mm size with or without swivel joints, any size, including fixing to steel pipe or union all as specified and directed by Engr-in-charge.
S & F in repair 15mm bore Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed fancy type all as specified and directed by Engr-in-charge.
S & F in repair 15mm bore Bib taps, cast copper alloy with Chromium plated fancy type crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed all as specified and directed by Engr-in-charge.
S&F in repair 15mm Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed all as specified and directed by Engr-in-charge.
S&F in repair 20mm Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed all as specified and directed by Engr-in-charge.
S & F in repair PVC valveless, syphonic action type, flushing cistern 10 lts capacity, low level, white, with inlet, ball valve, float and handle including brackets all as specified and directed by Engr-in-charge.
S&F in repair Vitreous china wash down water closet pan "Pedestal Pattern" white, with seat white closed pattern with flat bottom and cover mild steel chromium plated or aluminized hinging deviced including flush pipe and joint etc and connection to drain, flushing, pipe, anti-syphonage pipe, and fixing arrangements with fixing bolts etc including making good the disturbed portion of floor in cement concrete 1:2:4 type B-0, as in repairs complete all as spd & directed.all as specified and directed by Engr-in-charge.
S&F in repair sinks made of stainless steel 1.0mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm all as specified and directed by Engr-in-charge.
S&F in repair vitreous china wash hand basin white flat back size 550x400mm (excluding tap, waste chain and plug and porcelain stopper and but incl brackets all complete,all as specified and directed by Engr-in-charge.
S & F in repair Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe all as specified and directed by Engr-in-charge.
S & F in repair Vitreous China urinal full stall type white spinder complite connection to cistern as directed By EIC (excluding flushing cistern, flush pipe and waste pipe)
S&F in repair CP wall mixer 3-in-1 system with provision for both telephone shower & overhead shower complete with 115mm long bend pipe, complete all as specified & dirercted Make: Cera, Jaquar, Marc & Hindware as per Sample and directed by Engr -in Charge
S & F in repair CP jet with brass braided hose 1.0 mtr long Make: Cera, Jaquar , Marc & Hindware as per Sample and directed by Engr -in Charge
S & F in repair CP toilet paper holder. Make: Cera, Jaquar , Marc & Hindware as per Sample and directed by Engr -in Charge
S & F in repair PVC seat cover of EWC with bracket of white colour of Make - Cera, Hindware , Parryware
S&F in repair Steel Dropery rod 25mm bore colour coated of desired colour with pair of PVC Funnel and Boacket for length n exc 2.0 m Max length all as specified and directed by Engr-in-charge.
S&F in repair hand shower (health faucet ) with 8mm dia and 1 meter long CP flexible tube and wall hook complete all as specified Make: Cera, Jaquar , Marc & Hindware as per Sample and directed by Engr -in Charge
M/S JOHN VASSELLY
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .