Karnataka

AOC

Works

Roads

Improvement of (SH-57) Highway connecting Bagalakote with Beligerirangana betta via Badami, Gadag, Sirahatti, Guttal, Shimoga, Tharikere, Chikamagalur, Belur, Hassan, Holenarasipura, K.R Nagar, Belikere, Nanjangud Yalandur From Ch.353.00 km to 354.50 km and Ch.360.50 km to 361.50 km in selected reaches in Tarikere Taluk, Chikmgalur district.

Public Works Department

PWD Division Office Chikkamagaluru | Karnataka

Amount: ₹3.0 CrCloses: 20 Feb 2026Closed

Bids

1 Bid20 Feb 2026

#	Company	Amount	Status
1	₹3.2 Craccepted-aoc	₹3.2 Cr	accepted-aoc

Tender Value

₹3.0 Cr

EMD Value

₹4.6 L

Closing Date

20 Feb 2026, 10:00 pmClosed

Tender Inviting Organisation

Name

Public Works Department

Work Description

Improvement of (SH-57) Highway connecting Bagalakote with Beligerirangana betta via Badami, Gadag, Sirahatti, Guttal, Shimoga, Tharikere, Chikamagalur, Belur, Hassan, Holenarasipura, K.R Nagar, Belikere, Nanjangud Yalandur From Ch 353.00 km to 354.50 km and Ch.360.50 km to 361.50 km in selected reaches in Tarikere Taluk, Chikmgalur district.

Tender Information

Tender ID

PWD/2025-26/RD/WORK_INDENT30713

Reference Number

PWD/2025-26/RD/WORK_INDENT30713

Tender Type

Open

Product Category

Roads

Location

PWD Division Office Chikkamagaluru

Source Website

Subscribe to view

Documents Required

9 documents required · 9 mandatory

Technical Bid

RequiredTo qualify for Award of this contract, each Tenderer in its name should have in the last five years i.e.2020-21, 2021-22, 2022-23,2023-24&2024-25 3.2b satisfactorily completed as prime contractor, at least one similar work such as ASPHALT ROAD work of value not less than 152.42 lakhs.work done Certificate issued by the competent Authority of rank not below the rank of Executive Engineer.

RequiredThe Tenderer should have executed in any one financial year in the last five years i.e.2020-21, 2021-22, 2022-23,2023-24&2024-25 3.2 c the following minimum quantities of work 1. Earthwork excavation /embankment/sub grade -4913.00 m3 2.GSB/WMM-2465.00 m3 3. DBM/BC/BM/SDBC- 791.00 m3 work done Certificate issued by the competent Authority of rank not below the rank of Executive Engineer.

RequiredThe Tender should have a valid KPWD Registered Class-II and Above contractor.

RequiredExisting commitments and ongoing works for the next 11 months

RequiredTo qualify for award of this contract, each Tenderer in its name should have in the last five years i.e. 2020-21, 2021-22, 2022-23,2023-24&2024-25 3.2 a achieved in at least two financial years an average annual financial turnover of Rs.609.68 Lakhs, in all classes of Civil Engineering Construction works only Balance sheet & Profit & Loss Account indicating contract receipts issued by the competent accountant / Authority with UDIN number

RequiredEach tenderer should further demonstrate liquid assets and / or availability of Credit facilities of not less than Rs.91.45 Lakhs Credit lines / letter of credit / certificates from banks for meeting the fund requirement etc.

RequiredName, address, and telephone, telex, and fax numbers of the Tenderers may provide references if contacted by the Employer.

RequiredGST Declaration Certificate

RequiredOwning the following key and critical equipment for this work TO BE OWN-1 Tippers 2no,2. Excavator/JCB1 no, 3. Hot mix plant, Minimum Capacity of 40/60 TPH 1no,4 Vibratory Road Roller1no, 5. Mechanical Paver Finisher1no, 6.Pugmill 1no, 7.Water tanker 1no,8. Motor grader1no. For OWN/HIRE/LEASE 1 Tippers 2no, 2. Excavator/JCB1 no, 3. Vibratory road roller 1 no,4.Static Road Roller 1 No, 5.Mechanical sprayer1 no, 6.Water tanker 1no

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

In the Sanctioned Estimate, the item rates are showing inclusive of all applicable taxes but it is to be noted that rates are exclusive of taxes (GST).

Estimate rates are excluding GST as per Common SR 2023-24 continued to 2024-25 and prevailing GST (18% of Amount Put to tender) amount is kept in the form of Lump sum in sanctioned estimate according to guidelines in Common SR 2023-24 (As per the circular from Govt of Karnataka no.12/2024 Bengaluru dt:09.08.2024). Therefore, Amount put to Tender and ECV amounts are excluding GST even though it is showing inclusive Tax in Draft Tender Schedule Process. Hence, GST will be paid separately for the quoted amount accordingly. The bidder has to quote the rate exclusive of GST and to submit a declaration which is duly signed by the bidder along with their tender proposal.

The contractor shall submit the details of technical staff employed by him.

Conditional tenders will not be accepted

The tenderer shall bear all costs associated with the preparation and submission of his tender, and the employer will in no case be responsible and liable for those costs.

The cost of the Tender form shall not be refundable.

The employer is not responsible for any delay in accessing Karnataka Public procurement (KPP) portal.

Royalty on construction materials and other applicable taxes will be deducted as per prevailing Government orders.

All the formats prescribed in the bid document shall be filled by the tenderer in complete manner.

All scanned documents to be uploaded shall be in original and the Executive Engineer reserves the right to verify the documents before approval.

The employer reserves the rights to Reject or accept any or all the tenders without assigning any reasons.

All safety precautions, warning signs, night illumination, reflectors, deployment of security guards has to be ensured so that no untoward incidents happens on account of negligence or any project activity. Contractor should indemnify the client to that extent.

The item rates quoted shall include cost of royalty charges on construction materials and other taxes as per the rates provided in prevailing cost & conveyance of all materials, Curing, Watering, unloading with all leads & lifts, labor, hire charges of machinery equipment etc., complete including all incidental charges. All the items shall be executed as directed by the Engineer in charge of the work.

Further particulars, if any queries required to the Contractor, they can get from the office of the concerned Executive Engineer, PWD Division, during office hours on all working days.

Contractor should follow strictly the prevailing rules of labour act.

The Tenderer should furnish all necessary original documents mentioned in the bid document to the Executive engineer at the time of verification of documents during Technical Bid evaluation

The intending bidders are requested to note that they should abide by the instructions and conditions contained in the bid documents and further orders thereon.

Contractor has to upload the valid EPF registration copy.

The successful bidder has to follow the prevailing Government orders regarding Royalty Charges. The Contractor has to submit MDP Certificate along with the running contractor bills. Otherwise Department will take necessary action as per the Government Orders/Circulars.

Increase in GST shall not be paid in the extended period of contract.

As per Karnataka state Government order LD.300.LET.2006 Bangalore dated 01.01.2007 and Government letter no PW.134.BMS.2007 dated 27.07.2007 a sum amounting to 1 Percent of the bill amount will be deducted towards constructions labour welfare fund.

Contractor should take all precautions to ensure that no damage is caused to the existing works and other similar structures which have been constructed by other agencies during project execution. If any damage is caused, it has to be rectified on his own risk and cost.

Materials like bitumen, steel and cement etc., required for the work shall be procured by the tenderer themselves and should got tested by the Quality Assurance Authority before commencement of the work.

Work shall be carried out according to relevant IS/IRC codes specifications depending on type of work.

The bidder has to establish field laboratory at the work site as per GO No:PWD/243/SEV/2013 Bengaluru dated:22.07.2014.

The Defect Liability period for this work is 2 years and 3 years of maintenance after completion of DLP of 2 years as per provisions made in the tender.

Work sanctioned under the Head of Account 4059-80-051-0-60-132-CMIDP

The tenderer should be a KPWD registered Contractor Class II & Above Registration and the tenderer should submit registration certificate.

In SR 2023-24 Vol - 1 - Item Code : 1.7 Manual Means - Construction of Embankment with approved materials deposited at site from roadway cutting should be read as MECHANICAL MEANS - Construction of Embankment with approved materials deposited at site from roadway cutting

The Contractor has to quote the same rate to the same items of work that is to be executed at different chainages. If in case, the Contractor quotes different rates for the same item appearing at different places of BOQ then, the lowest Quoted Rate for the same items will be considered for that particular item for evaluation and payment.

Technical Criteria

General

Minimum financial turnover (civil engineering construction works) not less than two times the annual payments from this contract (Rs. xxxxx Lakhs)

Satisfactoriy completed (atleast 90%) as prime contractor at-least one such similar work of value not less than Rs. xxxxxxx (80% of estimated cost of tender)

Executed in any one year the following minimum quantities of work (Cement Concrete - xxxx cum, Earthwork - xxxx cum, etc) (80% of peak rate of construction)

Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year

Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year

Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx)

Liquid assets and /or availability of credit facilities of no less than Rs. xxxxxx Lakhs (estimated cash flow for 3 months of peak construction period)

Total value of civl engineering works executed and payments received in the last five years (year-wise)

List of existing commitments and ongoing works

List of works for which tenders already submitted

Banker Details for reference

Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded

Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years

Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded

List of Financial Resources with Certificates

Past Experience

To qualify for Award of this contract, each Tenderer in its name should have in the last five years i.e. 2020-21, 2021-22, 2022-23,2023-24&2024-25 3.2(b)satisfactorily completed as prime contractor, at least one similar work such as ASPHALT ROAD work of value not less than 152.42 lakhs. work done Certificate issued by the competent Authority of rank not below the rank of Executive Engineer.

Others -- Work done Certificate issued by competent Authority of rank not less than Executive Engineer.

The Tenderer should have executed in any one financial year (in the last five years i.e.2020-21, 2021-22, 2022-23,2023-24&2024-25 3.2(c) the following minimum quantities of work 1. Earthwork excavation /embankment/sub grade -4913.00 m3 2.GSB/WMM-2465.00 m3 3. DBM/BC/BM/SDBC- 791.00 m3 work done Certificate issued by the competent Authority of rank not below the rank of Executive Engineer.

Others -- Work done Certificate issued by competent Authority of rank not less than Executive Engineer.

Capabilities of Vendor

The Tender should have a valid KPWD Registered Class-II and Above contractor.

PWD Registration Certificate (Class I/II/III/IV)

Statement indicating the (A) Existing commitments and ongoing works for the next 11months , (B)Details of works for which tenders are already submitted . The statements should furnished as per statement 1.5 (A),(B) of Section 3 of Qualification information in Standard Bid document.

Others -- Details of work listed in the Statement should be counter signed by the EE or Equivalent officer

Owning the following key and critical equipment for this work TO BE OWN-1 Tippers 2no,2. Excavator/JCB1 no, 3. Hot mix plant, Minimum Capacity of 40/60 TPH 1no,4 Vibratory Road Roller1no, 5. Mechanical Paver Finisher1no, 6.Pugmill 1no, 7.Water tanker 1no,8. Motor grader1no. For OWN/HIRE/LEASE 1 Tippers 2no, 2. Excavator/JCB1 no, 3. Vibratory road roller 1 no,4.Static Road Roller 1 No, 5.Mechanical sprayer1 no, 6.Water tanker 1no

Others -- ownership certificate/Hire basis certificate

Financial Status

To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e. 2020-21, 2021-22, 2022-23,2023-24&2024-25 3.2(a) achieved in at least two financial years an average annual financial turnover of Rs.609.68 Lakhs, (in all classes of Civil Engineering Construction works only) Balance sheet & Profit & Loss Account indicating contract receipts issued by the competent accountant / Authority with UDIN number

Others -- Audited CA Certificate of Annual Turnover

Each tenderer should further demonstrate liquid assets and / or availability of Credit facilities of not less than Rs.91.45 lakhs (Credit lines / letter of credit / certificates from banks for meeting the fund requirement etc.

Others -- Bankers certificate in the prescribed format issued by Nationalized Banks

EMD for Rs. 100000.00 shall be paid through KARNATAKA PUBLIC procurement PORTAL (KPPP) and the Balance of Rs.3,57,265.00 by Bank Guarantee issued by Nationalised/Scheduled Bank or demand draft/bankers cheque/specified small savings instruments online/ or offline modes of e-payment. bidder should upload the scanned Copy of such original document issued by Nationalised/Scheduled Bank IN KPPP. The bidder has to submit the uploaded original Bank guarantee or other documents which described above before entering the agreement if awarded.

Others -- Scanned copy of E.M.D and Bank Guarantee

Work Locations

Fee & Financial Details

Tender Fee Amount

₹5,000

EMD Fee Amount

₹4.6 L

Important Dates

Last Activity

20 Feb 2026

Published

3 Feb 2026

Bid Opening

21 Feb 2026

Download Ends

18 Feb 2026

Pre-Bid Meeting

16 Feb 2026

BOQ Preview

•

Mechanical Means -

•

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, stru...

•

Granular Sub-Base - By Mix in Place Method - Construction of Granular Sub-Base of required grading as per design spreading in uniform layers with motor grader on prepared sur...

•

Scarifying the existing bituminous road surface to a depth of 50 mm and disposal of scarified material by Mechanical Means using Hydraulic excavator with in all lifts and lead. Ref to MoRT&H : IRC - 3...

•

Wet Mix Macadam (Plant Mix Method) - Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC ...

•

Tack coat on Bituminous surface - Providing and applying tack coat with VG-10 Bitumen using pressure distributor at the rate of 0.20 kg/m2 on the prepared bituminous surface cleaned with m...

•

Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface - Providing and laying of hot applied thermoplastic compound 2.5 mm thick including ref...

•

Retro-Reflectorised Traffic Signs - Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC:67:2022 made of Class B Type IV ret...

•

Retro-Reflectorised Traffic Signs - Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC:67:2022 made of Class B Type IV ret...

•

Direction and Place Identification Signs upto 0.9 m2 Size Board. - Providing and erecting direction and place identification retro- reflectorised sign as per IRC:67:2022 made of high intensity...

•

Supplying and Fixing of Molded Shank Raised Pavement Markers / Cats Eye made of polycarbonate and ABS moulded body and reflective panels with micro prismatic lens capable of providing total int...

•

Cutting of Trees, excluding removal of stumps and roots of trees - Girth from 900 mm to 1800 mm. Ref to MoRT&H : IRC - 201 ---- Including cost and conveyance of all materials,Labour,Hire charges of Ma...

•

Removal of stumps and roots including backfilling with suitable material to required compaction - Girth from 900 mm to 1800 mm. Ref to MoRT&H : IRC - 201 ---- Including cost and conveyance of all mate...

•

Providing and fixing RCC name board of size 1.35x0.60x0.04 m fixed in reinforced cement concrete poles of size 0.10x0.10x2.60m in cement concrete M 20 proportion ...

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...

•

Steel Fabrication

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting,...

•

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with ...

•

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works fro...

•

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works fro...

•

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating Each depos...

•

PIPE CULVERTS - Providing and Laying Reinforced Cement Concrete Pipe NP3 as per design in Single Row - Providing and laying reinforced cement concrete pipe NP3 for culverts on first class bedding...

•

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works fro...

•

Construction of Subgrade and Earthen Shoulders - Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting...

•

Construction of Embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded with desired compaction. (R...

•

Prime Coat over WMM/WBM (i) Providing and applying primer coat with SS1 grade Bitumen Emulsion on prepared surface of granular base including cleaning of road surface and spraying primer at the rate o...

•

Providing and laying Dense Graded Bituminous Macadam with 100 TPH capacity HMP batch type using crushed aggregates of specified grading, premixed with bituminous binder VG-30, @ 4.5 per cent by weight...

•

Providing and laying Bituminous Concrete with 100 TPH capacity hot mix plant batch type using crushed aggregates of specified grading, premixed with bituminous binder VG-30, @ 5.4 per cent of mix and ...

•

Third Year Maintenance

•

Patching of Shallow Potholes using SDBC Gr ii 25 mm thick Patching of shallow potholes on asphalt surfaces by using Semi Dense Bituminous Concrete 25mm thickness. The Cost is inclusive of removing the...

•

Fourth Year Maintenance

•

Fifth Year maintenance

•

Shifting of HT and LT Lines Along SH-57 Road at Lakkavalli and Bavikere Village in Tarikere Tq, Chikkamagluru Dist

•

Supply & stringing of Rabbit ACSR

•

(6/3.35 mm Al + 1/3.35 mm St), Std Wt: 214 Kg/KM and Stringing of Conductor for Rabbit ACSR (Issue Rate and Item 6.02 page no 46 of 81) (Material + Labour ) ---- Incl...

•

Supply & Erection of PSCC Pole - 8 Mtr Long, 200 Kg WL (Dwg No. BESCOM/GM/QS&S/49 Dtd 24.11.2018) as per REC Standards including Digging of Pit 1.6 Mtr depth for erection of 7.5/8 Mtr Long Steel/RCC/P...

•

Releasing and Refixing of RCC Pole - 8 M Long, 115 Kg WL (1.9 of 1425 ) ---- Including cost and conveyance of all materials,Labour,Hire charges of Machineries and Equipments with all lead and lifts, l...

•

Releasing & Refixing of 4 Pin cross arm with Insulator and Braces (1.9 of 160 ) ---- Including cost and conveyance of all materials,Labour,Hire charges of Machineries and Equipments with all lead and ...

•

Releasing & Refixing of 2 Pin cross arm with Insulator and Braces (1.9 of 160 ) ---- Including cost and conveyance of all materials,Labour,Hire charges of Machineries and Equipments with all lead and ...

•

Releasing and Restringing of ACSR Rabbit conductor (1.9 of 4361 )( 6.02 page no 46 of 81) (Labour ) ---- Including cost and conveyance of all materials,Labour,Hire charges of Machineries and Equipment...

•

Releasing of RCC/PSCC Pole of 7.5 to 8 Mtr long in a pit of 1.5 Mtr depth (0.9 of 992 ) ---- Including cost and conveyance of all materials,Labour,Hire charges of Machineries and Equipments with all l...

•

Releasing & Refixing of Over Head Service Mains (Single Phase/Three Phase) for consumer installation and street lighting and similar work (While executing reconductoring work) ( 13.10 page no 48 of 81...

•

Line Supports (Pole) Supply & Erection of Pre-Stressed Tubular Spun Pole - 11 Mtr Long, 500 Kg WL (Dwg No. BESCOM/GM/QS&S/45 Dtd 24.11.2018) as per IS-13158: 1991 including Digging of Pit 2.5 Mtr dept...

•

Line Supports (Pole) Supply & Erection of PSCC Pole - 9 Mtr Long, 200 Kg WL (Dwg No.BESCOM/GM/QS&S/50 Dtd 24.11.2018) as per REC Standards including Digging of Pit 1.8 Mtr depth for errection of 9 to ...

•

Line Supports (Pole) Supply & Erection of RCC Pole - 9 Mtr Long, 145 Kg WL (Dwg No. BESCOM/GM/QS&S/02 Dtd 24.11.2018) as per IS-785including Digging of Pit 1.8 Mtr depth for errection of 9 to 10 Mtr L...

•

Single H Frame with Transformer Seating and Seating

•

angle support cross arm for 11 Mtr Spun Pole for 25

•

kVA (OH Line) - MS (Dwg No. BESCOM/GM/QS&S/66 Dtd 24.11.2018) ( Volume -6 pg no.10 of 81) ---- I...

•

GOS as per IS-9921, IS-1977 Providing and Fixing of H - Frame Set for fixing 11 kV, 200 Amps Single Break GOS - (For DP structure for providing New GOS for sectionalisation) - GI including Erection of...

•

Providing & Fixing the 11 kV, 200 Amps, Single Break GOS (C,D.S-24 Pg No 371/635 Sl.no 16 ) (Material ) ---- Including cost and conveyance of all materials,Labour,Hire charges of Machineries and Equip...

•

Transformer grounding GI Grounding pipe, B - Class, 42 mm dia, 2.5 M long, 3.2 mm thick with bolts nuts, GI Strips and wash ers complete Minimum Weight of GI Pipe: 7.3 Kgs (Material ) ---- Including c...

•

Guy Wire & GI Wire as per IS-2141 7/10 SWG Guy Wire (7/3.251 mm Dia), Std Wt: 680 Kg/KM (Volume-6 Item no.8.01 page no 05 of 81 ) ---- Including cost and conveyance of all materials,Labour,Hire charge...

•

Guy Wire & GI Wire as per IS-2141 8 SWG GI Wire (4.064 mm Dia), Std Wt: 131 Kg/KM (Volume-6 Item no.8.02 page no 05 of 81 ) ---- Including cost and conveyance of all materials,Labour,Hire charges of M...

•

DOLO Cutout as per IS-9385, Part-1 to 3 11 kV, DOLO Cutout Conventional to Erstwhile KEB

•

Specification & Fixing DOLO Cutout/Horn Gap Fuse including fixing of cross arm and wiring Vol-6 Item no. 25.01 ...

•

Insulator as per IS-1445 for Ceremic, IS-7935 for GI Pin, IEC-61109 for Polymeric Supply & Providing of 11 kV, 5 kN Composite/Polymeric Pin Insulator (24 mm dia FRP Rod) (Item no 6.06 page no 5 of 81)...

•

Insulator as per IS-1445 for Ceremic, IS-7935 for GI Pin, IEC-61109 for Polymeric Supply of 11 kV, 45 kN Polymeric Insulator (Item no 6.10 page no 5 of 81) (Material ) ---- Including cost and conveyan...

•

Cross Arms (MS & GI) as per IS-1977 11 kV, Special 3 Pin Cross Arm - MS(Dwg No. BESCOM/GM/QS&S/03 Dtd 24.11.2018) Vol-6 Item no2.03 pg.no 433/635 ---- Including cost and conveyance of all materials,La...

•

LT 4 Pin Cross Arm with clamps, bolts, nuts & washers with brace - MS For PSCC Pole 140 KG WL (CDS Sl.no 13 (b) pg.no 342/635) ---- Including cost and conveyance of all materials,Labour,Hire charges o...

•

Insulator as per IS-1445 for Ceremic, IS-7935 for GI Pin, IEC-61109 for Polymeric Supply of 1.1 kV Ceramic Pin Insulator (Shell only) (Material) ( PWD CommonSR 2023-24 Volume-6 I No.6.03 (Pg 341/522 M...

•

Insulator as per IS-1445 for Ceremic, IS-7935 for GI Pin, IEC-61109 for Polymeric Supply of 1.1 kV GI Pin for 1.1 kV Ceramic Shell Insulator(volume -6 item no. 6.04 page no 5 of 81) (Material) (PWD Co...

•

Releasing of RCC/PSCC Pole of 9 to 10 Mtr long in a pit of 1.8 Mtr depth (1113x0.9) item no. 2.02 pg.no 44 of 81 ---- Including cost and conveyance of all materials,Labour,Hire charges of Machineries ...

•

Insulator as per IS-1445 for Ceremic, IS-7935 for GI Pin, IEC-61109 for Polymeric Supplying and providing No.8 strain insulator (Item no 6.07 page no 5 of 81) (Material) ---- Including cost and convey...

•

Street light in Lakkavlli bavikere Village limits Tarikere taluk

•

Providing, Laying and Fixing of GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, includin...

•

Mechanical Means -

•

Earth work excavation for pipeline trenches in all kinds of soils by mechanical means as per drawing and technical specifications, including setting out, construction of ...

•

Fabricating, supplying and erection of ... ms long hot dip Galvanized Octagonal hot dip Pole with BSEN 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate with door opening arrangements...

•

Supplying, and fixing of Hot dip Galvanized M.S.Bracket suitable for out door luminaries and mounted on Octagonal pole using necessary bolts, nuts etc., complete. Single Arm Bracket with 2000 mm St...

•

Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection ...

•

Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for work...

•

Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers. 32 A (V6 CSR 2023-24 I.No.5.7.2 Pg.No.14 of 105 PWD Ele SR 2023-24) ----...

•

Supply and fixing of 4pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 Rating and as per IS-1...

•

Supplying and fixing Microprocessor Based Astronomical timer Switch with using necessary bolts, nuts and washers. (V6 CSR 2023-24 I.No.5.48 Pg.No.21 of 105 PWD Ele SR 2023-24) ---- Including cost and ...

•

GI/Copper strips for grounding connections, using necessary fixing materials as required. 25 x 3 mm GI strip (V6 CSR 2023-24 I.No.12.58.2 Pg.No.54 of 105 PWD Ele SR 2023-24) ---- Including cost and co...

•

Supplying, fixing and wiring Electronic Trivector Meter (ETV) 5 to 32/63 A three phase 4 wire whole current class-1 Accuracy Energy Meter. (V6 CSR 2023-24 I.No.5.35 Pg.No.19 of 105 PWD Ele SR 2023-24...

•

Supplying ......... A rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insula...

•

Fabricating supplying and mounting MS box made out ....SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front...

•

1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 16 Sq...

•

Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff 2.5 to 25 Sqmm (V6 CSR 2023-24 I.No.21.05 Pg.No.52 of 81 ESCOMs ...

•

Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40 mm dia 2.90 mm thick GI pipe 2.5m long buried in a pit . The pit shoul...

•

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified I...

•

Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. and M.S. Flat......with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint...

•

Guy Wire & GI Wire as per IS-2141 8 SWG GI Wire

•

(4.064 mm Dia), Std Wt: 131 Kg/KM (V6 CSR 2023-24 I.No.8.02 Pg.No.5 of 81 ESCOMs SR 2023-24) ---- Including cost and conveyance of all materials,Labour,...

•

Optical Fibre Cable (OFC) and its Accessories HDPE/PLB Pipe 50/42 mm (V6 CSR 2023-24 I.No.66.04 Pg.No.30 of 81 ESCOMs SR 2023-24) ---- Including cost and conveyance of all materials,Labour,Hire charge...

•

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit bre...

•

Brass Cable Gland 25 mm (V6 CSR 2023-24 I.No.63.01 Pg.No.28 of 81 ESCOMs SR 2023-24) ---- Including cost and conveyance of all materials,Labour,Hire charges of Machineries and Equipments with all lead...

•

Heavy Duty Copper Terminal Long Barrel 25 Sqmm Copper Terminal, Apprx Wt: 11 Gm (V6 CSR 2023-24 I.No.59.01 Pg.No.26 of 81 ESCOMs SR 2023-24) ---- Including cost and conveyance of all materials,Labour,...

•

Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of O...

•

Supplying, fixing and wiring 0 to 30V Direct Reading DC Voltmeter/Ammeter. (V6 CSR 2023-24 I.No.5.23 Pg.No.18 of 105 PWD Ele SR 2023-24) ---- Including cost and conveyance of all materials,Labour,Hir...

•

Supplying, fixing and wiring 0 to 30A Direct Reading AC analog type Ammeter (V6 CSR 2023-24 I.No.5.24 Pg.No.18 of 105 PWD Ele SR 2023-24) ---- Including cost and conveyance of all materials,Labour,Hir...

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

short tern cmidp.pdf

Others - Short term • 1.46 MB

GST DECLARATION CERTIFICATE.docx

Others - GST DECLARATION CERTIFICATE • 0.01 MB

Notification 30.pdf

Others - TENDER NOTIFICATION • 8.24 MB

required docs only upload in eproc.pdf

Instructions to Tenderers • 0.84 MB

30713-KW4 -400lakhs.doc

Tender Document • 4.52 MB

Period of completion -30713.pdf

Others - Period of completion • 0.32 MB

Ready to Participate?

Download all tender documents and submit your bid