Supply, Fabrication, galvanizing, erection of Pr. Tr. gantry, stringing of strung bus, Providing earth pit, providing cable duct, plinths for Power Transformer and breaker, and Road work for enhancement of 33/11KV existing Power transformer capacity

Amount

Supply, Transport, Loading , Unloading, fabrication,without lengthwise welded joints, Galvanizing of RS joist (250X125/200X100) and M.S.Plate(10/12 mm) to the site including cost of material, labour, lead, lift etc., complete as directed by the department engineer at site.

Labour for Dismantling of RS joist (250X125/200X100) and M.S.Plate(10/12 mm) complete as directed by the department engineer at site.

Supply, Transport, Loading Unloading, fabrication,Galvanizing of MS Channel (125x65/100x50), MS Angle to the site including cost of material, labour, lead, lift etc., complete as directed by the department engineer at site.

Labour for Dismantling MS Channel (125x65/100x50) MS Angle , complete as directed by the department engineer at site.

Supply, Transport, Loading and Unloading of MS Round rod (40mm) to the site including cost of material, labour, lead, lift etc., complete as directed by the department engineer at site.

Supply, Transport, Loading and Unloading of MS Flat (65x10 / 50x8) to the site including cost of material, labour, lead, lift etc., complete as directed by the department engineer at site.

Painting Two coat of aluminum paint including cost of paint brush and consumable for yard light pole

Labour for erection of Heavy section structure ( Sec wt above 14 kg/m)

Labour for erection of Light section structure ( Sec. wt below 14 kg/m)

Labour for erection with own crane arrangement and connecting link rod, SF 6 gas filling and,& other consumables, & as directed by the field Engineer. VCB/SF6 CB 11 or 22 or 33KV

Labour charges for erection of 33 or 22 or 11KV CT,PT(One 1Ph or 3Ph unit)using manual labour or crane by own arrangement

Labour for erection of AB Switch 33 or 22 or 11 KV without earth hand operated

Labour for erection of LAS including fabrication of base if required. station type 33 or 22 or 11KV

Labour for erection of single pole stack upright,under hang or suspension insulator . 33 or 22 or 11kV .

Labour for stringing of strung bus including hoisting of insulators. 33 or 22 or 11KV strung bus singlezebra conductor(1 span 3 runs).

Labour for Dismantling strung bus including hoisting of insulators. 33 or 22 or 11KV strung bus single zebra conductor(1 span 3 runs).

Labour for erection of bus bar Using 50mm with making required bends

Labour for Dismantling of bus bar Using 50mm with making required bends

Labour for erection of bus bar Using 50 mm without making bends

Labour for Dismantling of bus bar Using 50 mm without making bends

Labour for providing of jumpers and droppers.

Labour for Dismantling of jumpers and droppers.

Labour, Machineries, Consumables for Fabrication of earth electrode of 10Mtr/6 Mtr length as directed by the field Engineer.

Labour, Machineries, Consumables for fabrication and erection of earth spike.

Labour, Machineries, Consumables for erection of earthmat and earth raiser

Providing 140/150 mm dia bore using power rig inculding labour, lead lift etc.In all type of soil and erection of earth electrode, supply and providing of A grade Bentonite powder with 5% common salt mixed with available site clay soil with water 5 Kg/ per metre depth in earth bore and pouring water and tightening of earth bore,upto satisfactory earth value as directed by the field Engineer.

Labour for Erection of Panel/Battery Charger Simplex indoor/outdoor

Labour for laying of cable in duct / trench including the cost of Alu. tag for identification Upto 8 core

Labour for excavation and refilling of trench of ave.width of 0.3M and ave.depth of 0.8M for earthmat and and ave.depth of 0.4M for laying of cable below fixed yard level and of any size as required by field engineer.

Supply of 8 Mtr long stepped tubular pole for yard light as per drawing and primer coat and as directed by the field engineer.

Supply and erection of LED lamp 72 W fitting with fixure and fuse box including wiring and testing for burning condition including the cost of 15 Amps 2way strip connector and other consumables.

Erection of Yard light Pole including laying of cable inside pole

Supply of Fire extinguisher DCP type trolly mounted 25 KG wherever required and as directed by the field engineer.

Supply of Fire extinguisher DCP type trolly mounted 10 KG wherever required and as directed by the field engineer.

Supply of Fire extinguisher DCP Portable type 5 KG wherever required and as directed by the field engineer.

Supply of Fire extinguisher Foam type 9 ltr wherever required and as directed by the field engineer.

Supply and erection of Switch end clamp for zebra

Supply & erection of Switch end clamp for 2" Bus

Supply& erection of `T`Clamp for zebra to zebra

Supply & erection of `T`Clamp for 50 mm bus to zebra

Supply & erection of of 2" Free end

Supply & erection of 2" Seating block

Supply & erection of Corona bell for 50 mm bus bar

Supply & erection of Reducer clamp for 50 mm Bus to Zebra

Supply & erection of PG Clamp for Zebra

Supply & erection of 4 Bolted tension fitting

Labour for loading or unloading or shifting of materails Non fragile

Labour for loading or unloading or shifting of materials Fragile

Labour charges for painting of Green enamel paint on all kind of structure earthing including removal of dust, rust using wire brush and painting brush etc.

Hire charges for Crane provided ( 12tonne) for any erection or loading,Unloading or shifting of equipments,done bydepartment or by the contractor.

Manufacturing and supply of bolt of required length out of 18,20mm dia GI round including the cost of GI round and 2 Nos. of GI.nuts as directed by the field Engineer. Grout bolt & Eye bolt

Supply and provision of M8, M9, M10, M12, and M16 full thread G.I. Bolts and Nuts of various sizes for erection of AB Switches and insulator or any other purpose wherever required and as directed by field Engineer.

Fabrication, supply and fixing ofindividual equipment board of 750x450mm out of14swg (2mm)Mssheet and25x25x3mm MSangle as per drawing and as directed by the field engineer including costof allmaterials(8kg/boardx3nos)

Fabrication and fixing of earth electrode identification board size 300x250mm out of 14SWG(2mm)MS sheet and 12mm dia MS round perdrawing and as directed by the field engineer including cost of all materials(2KG/ boardx14no)

Manufacturing and supply of fire protection stand of size2400HX1500W mm out of 40x40x6mm MS angle for frame 125x65mm MS channel for base 14SWG(2mm)MS sheet for hood as per drawing and as directed by the field engineer including cost of all materials

Manufacturing and supply of LC/key board of size 900mm,length675mm height made out of 75x25 mm aluminium frame embedded with 12mm prelaminated wood practical board using screws rear two nos of plain glass of 5 mm thick fixed with metal roller moving on alumunium channel should be provided on front with locking arrangements .glass pieces should be fastened on the glass shutter for opening and closing wall clamps made out of 6mm MSplate should be provided on top as per drawing and as directed by the field engineer including cost of all materials.

Manufacturing and supply of fire bucket of 10ltr capacity made out of 26(0.46mm)SWG MS sheet painted with white and red enamel paint inside and outside .Bottom of bucket shall be U shaped outside of the bucket shall be written as FIRE in english/Tamil in white enamel paint including cost of all materials

Fabrication supply and fitting of CT/PT junction box out of 14SWG (2.00mm) MS sheet where ever required as directed by field engineer .The box shall have sturdy hinges provision for mounting terminal blocks and locking arrangements including cost of all materials 400WX150DX300H

Manufacturing and supply of yard light box of size 200w X 175h X 150d mm out of 18 SWG (1.2mm) MS sheet with cable entry holes.Fixing arrangements for fuse units and mounting clamps dirceted by the field engineer including cost of materials.

Labour charges for removing rust primer coat first and second coat painting both sides and writing details in MS boards and R.S.Joists including cost of enamel paint (dulex, asian berger preferred) and other consumables as directed by the field Engineer.

Labour charges for writing details in finished surface boards including cost of enamel paint (Dulex,Asisn,Berger prefferred) and other consumables as directed by the field Engineer.

Labour charges for drawing layout and writing details in LC /key board including cost of enamel paint (Dulex,Asian,Berger preffered) and other consumables as directed by the field engineer

Supply and erection of B class GI pipe for extension of tandem/down pipe forAB switches and for any other work as required and directed by the field engineer including cost of Gi pipe 40mm dia

Supply and fixing of ISI mark bakelite HRC rewirable fuseholder reputed make in panels/boxes for AC/DC/PT circuits wherever required as directed by the field engineer. 16 Amps

Supply and fixing of ISI mark backelite HRC rewirable fuseholder reputed make in panels/boxes for AC/DC/PT circuits wherever required as directed by the field engineer. 32 Amps

Supply and fixing of ISI mark bakelite HRC rewirable fuseholder reputed make in panels/boxes for AC/DC/PT circuits wherever required as directed by the field engineer. 63 Amps

Supply and fixing of ISI mark backlite HRC rewirable fuse without holder of reputed make in panels/boxes for AC/DC/PT circuits wherever required as directed by the field engineer.2/5/10 Amps

Supply and fixing of ISI mark backelite HRC rewirable fuse without holder of reputed make in panels/boxes for AC/DC/PT circuits wherever required as directed by the field engineer.63Amps

Supply and fixing of ISI mark porcelain rewirable fuse unit of reputed make in panels/boxes for AC/DC/PT circuits wherever required as directed by the field engineer. 15 Amps

Supply and fixing of ISI mark porcelain rewirable fuse unit of reputed make in panels/boxes for AC/DC/PT circuits wherever required as directed by the field engineer. 32Amps

Supply and fixing of AC 3 phase 4 pole 415V, 32A ISI mark change over switch of reputed make as required and directed by the field engineer.

Supply and fixing of mounting channel suitable for CBTM5 terminal block in panel/box as required and directed by field engineer

Supply and fixing of nut type CBTM5 terminal block in panelbox as required and directed by field engineer

Supply and fixing of disconnecting type terminal block for CT/PT circuits in panel box as required and directed by the field engineer.

Supply and glanding of ISI mark cable gland of suitable size of reputed make including removing insulation of cable and providing suitable holes as directed by the field engineer.19mm

Supply and glanding of ISI mark cable gland of suitable size of reputed make including removing insulation of cable and providing suitable holes as directed by the field engineer.25mm

Supply and glanding of ISI mark cable gland of suitable size of reputed make including removing insulation of cable and providing suitable holes as directed by the field engineer.28mm

Supply and termination of cable core end including cost of cable socket (Lugs), ferrules straps etc as per cable schedule and as directed by the field engineer.

Supply and fixing of (Godrej) 6 lever navotal lock with triplicate keys for AB Switches and for any other purpose including the cost of ring and key token as directed byfield Engineer.

Supply and providing of 600mm mean dia,300mm height,36mm thick cement collar for identification of earth electrode location including 1 primer and 2 coat of colour wash as directed by field engineer.

Manufacturing and supply of sand drums made out if oil drum of size 580mm dia and 420mm height with conical cover made out of in sheet provided with handle including cost of barrel sand and consumables as direcyed by the field engineer.

Supply and fixing of ISI make DC MCB in Panels/Boxes of reputed make as directed by the field engineer.1Ph 16Amps

Supply and fixing of ISI make DC MCB in Panels/Boxes of reputed make as directed by the field engineer. 3Ph 32Amps

Supply and fixing of Copper tape/rope for interlinking panel earthing and for any other purpose of any size as directed by the field engineer

Earthwork excavation with initial lead, left,etc., complete

P.C.C.1:4:8 using 40mm metal for foundation including cost of materials, lead, lift etc., complete.

P.C.C.1:3:6 using 40mm metal for foundation including cost of materials, lead, lift etc., complete.

P.C.C 1:2:4 using 12 to 20 mm HBG metal for foundation including cost of all materials, labour, lead lift and curing etc., complete With shuttering for Transformer plinth

Brick work in following Cement Mortar using best quality of Country Bricks of size 8-3/4" x 4-1/4" x 2-3/4" for foundation and basement including curing, etc., complete complying with standard specifiction.

Plastering with Cement Mortar 1:5 (One cement and Five sand), 12mm thick in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers.

White washing two coats with freshly burnt white shell lime in all floors including cost of lime, blue powder fevicol type gum, brushes, scaffolding charges, etc., complete complying with standard specification and as directed.

Painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification.

supplying and fixing of ms angle 50x50x6mm for cable duct incluing cost of all material labour charge

RCC 1:1-1/2:3 (One Cement, One and a half sand and Three hard broken stone jelly) using 20 mm gauge hard broken granite stone jelly for all RCC items of works excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary and bearing surfaces of walls, beams etc. shall be finished smooth with Cement Mortar 1:3 (One Cement and Three Sand) and kraft paper laid over it without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers

Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel grills for all RCC works as per design given including cost of steel and G.I. binding wire in all floors etc. complete complying with standard specification. (Contractor has to make his own arrangements for the supply of steel and binding wire)

total of slno1 to 95

Contigencies @ 1 %

Add ESI @ 3.25 % of 40 % work portion

Total

Total

JK ENGINEERS

MK DHANALAKSHMI ENGINEERING PRIVATE LIMITED

YAMINEE ELECTRICAL PROJECTS PRIVATE LIMITED