LIBRARY MODIFICATION WORK AT 3RD FLOOR, NORTH WING, C-DAC IP BUILDING PUNE

Cutting, dismantling and modifying existing wooden acoustical partition for fixing of glass door, including careful cutting and removal of required portion of existing partition without damaging adjoining structure, providing and fixing a clear opening of 1500 mm width for glass door, and making good the remaining partition to match existing pattern, complete with 300 mm wide partition frame all around the door opening, similar to existing partition design. Rate to include cost of all materials, labour, tools & plants, dismantling, disposal of debris, making good surfaces, finishing, and complete in all respects.

Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge

Providing and fixing in position Gypsum board false ceiling with 12.5 mm thick Gypsum boards, screwed/fixed to the under structure of suspended G.I. Grid constructed and suspended from the main ceiling consisting of ceiling sections of size 25 x 50 mm maximum center to center distance of 600 milimetre perimeter channel and intermediate channels at maximum center to center distance 1200 milimetre galvanized grid should be fixed to reinforced cement concrete slab. The gypsum board should be fixed to galvanized iron grid with necessary screws. The boards should be taped and filled from underside to give smooth, seamless ceiling. The rate should include necessary additional ceiling sections and intermediate channels. Additional intermediate channels should be fixed to strap hangers for additional support to prevent strapping at every 1200 milimetre item to be completed in all respect including necessary sleeves for ducts finishing of joints cut outs, painting including labour, material, lifts etc. all complete.

Dismantling, rearrangement and refixing of existing mineral fibre acoustical false ceiling, including careful removal of ceiling tiles and suspension system wherever required, re-laying and realignment to match existing ceiling pattern, and providing and fixing required additional end angles, suspension members, GI T-sections, cross-tees, hangers and accessories, to ensure continuity and uniformity with existing ceiling layout. The ceiling shall consist of mineral fibre acoustical tiles with fine fissured (bevelled tegular) edges, of size 600 × 600 × 16 mm. Rate to include cost of all labour, materials, tools & plants, scaffolding, minor additions/replacements, and finishing.

Providing & Fixing in position, Acoustical partition made from 12mm w p Plywood & 1mm laminate on both side, 50x50 mm commercial-wood frame of 600x600 c to c having wooden supports from wall of required length, infront of 1000 Gsm synthetic wool 50 mm , including cost of required Cut-Outs, decorative mouldings / finishing-items/paint & Scaffolding, as per Architectural & Acoustical Design & Instructions & Complete in all aspects. including all materials labour,finishing etc complete.

Providing and fixing 12mm toughned glass door with required fixtures and fittings like floor mounted spring, Handles and frosted films matching with existing pattern etc completed

Modular Linear Workstation of Size 1200(L) X 600(W): Supply and installation of above workstations with minimum 70mm thick 1200 mm high panels at partition (side panels shall be attached). With combination of two separate metal raceways for data and power at bottom, two intermediate fabric blocks, top tile-white board, fabric magnetic. The 35 mm thick Pre-laminated particle board support for top wiring at both sides of workstation shall be provided. The table should be complete with suitable keyboard holder tray. The cutouts for 6 Module for power (2no's)and 2 Module (1no's) for network point is to be there. The cable groomer/raceway is to be provided for data routing as well as data cables. The sample/drawing has to be approved by client before delivery. The OEM should be BIFMA Certified.(Refer drawing section) Notes: 1) Material of table top-Worktop should be made of 25mm thick Pre-laminated particle board. 2) Material for tiles for top: Fabric magnetic (over GI sheet) plus white board 3) Material of bottom tile: Metallic (GISheet) 4) Plain edge banded with 2mm PVCTape

Pedestal : Supply and installation of Top supporting pedestal with flat metal front of total Size 390W x 585D x 725H (Including leveler) 3dr. of std. size, central locking. The OEM should be BIFMA Certified. (Refer drawing section) Note: 1) The top supporting pedestal should be from the same OEM of modular workstation. 2) The material of pedestal shall be CRCA sheet of minimum 0.8 mm (Bottom & body shell thickness), stiffener -1.2 mm, Drawer front - 0.8mm in powder coated finish (seven tank processes) per approved colour.