SPECIAL REPAIRS TO CERTAIN TOILETS AT BLDG NO P-319 OTM ACCN (RANE COY SINGLE LINE) AND SPECIAL REPAIRS AND ADDN/ATLN TO BLDG NO P-320 OTM ACCN (BHAGAT COY MIDDLE WING) OF TRG BN-1 AT BEG AND CENTER UNDER GE (CENTRAL) KHADKI

Amount

B/R PORTION Taking down chowkats and frame n.exc 1.5 Sqm each including shutters without taking off shutters from the frame and removing from site complete all as specified and directed.

Taking down chowkats and frame exc 1.5 Sqm but n.exc 4.00 sqm each including shutter wiuthout taking off shutter from the frame and removing from site complete all as specified and directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying & fixing in opening as per specification & drawing shown on Page No. 160 of SSR 2010 part II. complete all as specified and as directed.

S&F 30mm thick FACTORY MADE MOULDED DOOR SHUTTER ‐ WOOD FREE consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 25mm x 25mm for stiles, top and bottom rails. M. S. frame shall have a coat of steel primers. The inner panel shall consist of 25mm thick EPS of Density 23 Kg /Cbm. bonded with 2mm thick termite proof, water proof and fire resistant moulded PVC Sheet Manufactured by an ISO‐9001‐2015 certified company, with 2, 4, 6 raised panel design in different plain and / or prelam colours after routing the Moulded design on one side & 2mm plain and /or prelam PVC sheet on other side of the EPS. The edge of panel to be sealed with lipping of 15mm wide PVC sheet baton ( made by sticking 2mm rigid foam PVC sheets of 5mm (±0.25) thickness using PVC solvent cement ) and stile sides 25mm (5mm x 5nos.) thick and 30mm width PVC Sheet fitted along M.S. tube for hardware provision & for lock 25mm thick ( 5mmx5nos. ) PVC sheet of size 150mm x 200mm fixed with inner side of EPS Panel etc. complete all as per specification & drawing and as directed by Engineer-in-charge.

S&F 100mm long stainless steel medium weight but hinges for door shutter and frames complete all as specified and directed.

S & F aluminium anodised barrel tower bolts of extruded section and fixed 150 mm long complete all as specified and directed.

S & F Aluminium handles 150 mm , fabricated type, anodised , fixed with screws , complete all as specified.

S&F 300mm long mild steel sliding door bolts, bolt or clip type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any cement mortar complete all as specified and as directed.

M&L for Black Granite 18 to 20 mm thick (table rubbed and polished ) as in steps , jambs, pillars, window- cills, , and like over 15mm thick cement screed base in CM (1:4) including pointing with white cement (1:2) using marble dust with admixture pigment to match with shade of slab rubbing , polishing and rounding to edges complete all as specified and directed.

M&L for Machine cut cudappa stone slab 20-25mm over cement screed base, laid and jointedwith grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with pigment to match with shade of slab and rounding to edges complete all as specified and directed.

S&F aluminium louvered ventilators of section size 80mmx20mmx1.50mm including 5mm thick frosted glass fixed in half portion & adjustable type louvers in another half and stainless steel wire mesh fixed type on outside frame etc. making good the jambs and painting with existing surface matching complete all as specified and directed.

S&F aluminium powder coated window sliding type (3 track) with frame size 100x35x1.2mm thick and shutter frame size 39.40x17.70x1.2mm thick with two glass shutter and one mesh shutter including necessary jointing cleats, glazing clips, rubber packing, powder coated aluminium snap beading screws with and including 4mm thick tinted float glass and 0.36mm dia apperture 1.4mm SS wire mesh and fittings etc and making good the jambs and painting with existing surface matching complete all as specified and directed.

S & F for frame work such as grill, grating etc with ends bars shouldered and / or riveted or forged into spikes, framed guard bars, barred iron doors and similar work confirming to Fe 290 Gde E-165 complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M & L for 25 mm thick PCC 1:2:4 type B-1 using 20mm crushed stone aggregate as in leveling course complete all as specified and directed.

M & L for rendering for backing coat 10 mm thick average thickness for laying floor finishes in cement mortar (1:4), complete all as specified.

S & F coloured non skid ceramic tiles 300 mm x 300 mm x 6 to 7mm thick,in floors set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed bed in CM 1:6 average thickness for laying floor tiles pointed in coloured cement to match the shade complete all as specified and directed

M&L Glazed ceramic colour tiles in vertifical surface 350x250x7 mm /450x300x7mm thick with necessary border etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade complete all as specified and directed

S & F in repairs wash down water closet (pedestal pattern) with seat cover and flushing cistern complete set with acessories with P or S trap including connection to drain (or outgoing pipe ) and flushing pipe, antisyphonage pipe etc complete all as specified and directed.

S&F in repair two way angle cock with flange cast copper alloy chromium plated fancy type with crutch or butterfly handle screw down ,screwed both end for iron pipe or or brass ferrule for 15 mm bpre of pipe complete all as specified and as directed. Make Cera QT F2006211 HT F3001211

S&F in repair for CP Health Faucet ABS Body with 1 Meter Flexible tube & Hook complete all as specified and directed. Make Cera Cat No : F8030103

S&F in repair for Stainless Steel Jet sprayet with 1 Meter Flexible tube complete all as specified and directed.

S&F in repairs vitreous china squatting pan "Orissa" pattern size 580mmx440mm white with integral foot rests excluding flushing cistern and flush pipe including provision of lime concrete bedding complete all as specified.

S & F in repairs PVC High/Low level flushing cistern 10 litrescapacity including all fittings I.e float valve, syphon, flushpipe,brackets all as specified and directed. Make Cera Cat No B10110108 and Prayag or equivalent

M&L for Black Granite 18 to 20 mm thick (table rubbed and polished ) as counter wash basin making necessary cutting to fix counter wash basin as in vertical / horizontal of any size including pointing with white cement (1:2) using marble dust with admixture pigment to match with shade of slab rubbing ,polishing and rounding to edges complete all as specified and directed.

S & F in repair viterious china wash basin white counter type circle shape size 380x380x150 mm excluding taps waste chain and plug and porcelain stopper but incl necessary brackets and CP waste coupling and other fittings complete all as specified and directed. Cera Cat Part No :S2030113 Prayag or equivalent

S & F in repair Pillar taps chromium plated cast copper alloy with capstan heads screwed down high pressure with or without lettered Hot Or Cold With long screwed shanks and fly nutsscrewed for iron pipes 15mm bore dia all as specified and directed. Make Cera Cat Part No :F1019101 Prayag or equivalent

S&F for Vitreous China bowl urinall size 325x310x420 mm half stall pattern wall mounted (minimum), with Waste coupling of CP, (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and directed.

S&F in repair 32 mm bore PVC waste pipe of approved make suitable for WHB, Urinals etc complete all as specified and directed.

S & F in repair PVC connections 15mm dia with brass nut on both ends and washers 450mm long all complete all as specified and directed.

S&F in repair Bib tap fancy type cast copper alloy chromium plated fancy type with crutch or butterfly handle screw down ,screwed for iron pipe or or brass ferrule for 15 mm bore of pipe complete all as specified and as directed.

S&F in repair angle cock cast copper alloy chromium plated fancy type with crutch or butterfly handle screw down ,screwed both end for iron pipe or or brass ferrule for 15 mm bpre of pipe complete all as specified and as directed.

S&F Fancy type (in repairs) Stop cock (Concealed) cast copper alloy chromium plated fancy type with crutch or butterfly handle screw down ,screwed both end for iron pipe or or brass ferrule with long shank and cup for 15 mm bpre of pipe complete all as specified and as directed.Make Cera Cat Part No : QT F4060102 /Prayag or equivalent

S & F in repairs brass CP shower rose over head 125mm dia 200 mm dia long shower arm and flange incl fixing to steel pipe fixed in repairs as directed Make : Cera Cat Part No :F7010212AB / Prayag or equivalent.

S&F in repair towel rail 600 mm long of fixed with and including chromium plated brass screw and wooden / plastics cleats complete all as specified and directed.

S&F PVC floor trap square type with CP grating with or without hole including provision of jointing to waste pipes in run lead joint dia of outlet 75 mm, complete all as specified and directed.

M & L for taking down cement or cement lime plaster of any description at any position on brick or stone or PCC block walls, chajja etc including ranking out joints hacking for key scrubbing down with water etc complete all as specified and directed.

M&L for rendering 12mm thick on fair faces of brick or concrete surfaces of wall in CM 1:6 complete all as specified and as directed.

M&L for 15mm thick cemet plalster in CM 1:4 over wall / concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L for 5mm thick rendering on concrete surface of ceiling in CM 1:3 and rendering is to be finished even and smooth with out using extra cement complete all as specified and directed.

Demolition of brick /stone walls built in cement mortar incl all quoins, arches, pillars etc, but excluding ashler facings, dressed stonework and precast concrete articles complete all as specified and directed.

M & L for precast cement concrete solid block masonry with solid block of the grade C1 (1:3:6) set in CM (1:6) complete all as specified and directed.

M&L for two coats of white wash on newly plastered surfaces of walls including preparation newly plastered surfaces all as specified and directed.

M&L for preparation of old decorated plastered or unplastered surfaces of wall, cornices etc by brooming down or steel wire brushing, scrapping down, smoke soot, moulds, moos efflorescent and trading oil and greasy spots and applying two coat of cement base paint (white or tinned) complete all as specified and directed.

M&L for preparation of new decorated plastered or unplastered surfaces of wall, and applying two coat of cement base paint (white or tinned) over a coat of alkali reistant primer complete all as specified and directed.

M&L for applying two coats of white wash on ceiling including preparation of newly plastered surfaces complete all as specified and directed.

M&L one coat of white wash on ceiling including preparation of old decorated surface and complete all as specified and directed.

M&L Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) fixed in repairs complete all as specified and directed.

Dismantling existing tanks,exc 1000 ltr and n exc 2000 ltr removing to store complete all as specified and directed.

S&F rotational moulded polyethylene water storage tank of capacity 2000 ltrs consisting of four laver cylindrical vertical with top closed hoisted and fixed in position all as specified and directed.

S&F 20 mm dia gun metal ,globe or gate valves , with iron wheel head , screwed both ends for iron pipe complete all as specified and directed.

S&F 20 mm dia Ball valves ,high pressure with polythene float and flynut complete screwed for iron pipe or brass ferrule complete all as specified and directed.

Taking up or down 15mm bore existing steel tubing and connections including cleaning for refixing or removal to stores complete all as specified and directed .

Taking up or down 20mm bore existing steel tubing and connections including cleaning for refixing or removal to stores complete all as specified and directed .

S&F 15mm bore GI water tubing medium grade galvanised with all fittings and fixed complete to walls and ceilling or laid in floor complete all as specified and directed .

S&F 20mm bore GI water tubing medium grade galvanised with all fittings and fixed complete to walls and ceilling or laid in floor complete all as specified and directed .

Refixing 15mm bore old steel water tubing and connection in new or old position (walls, ceilling, floor etc) complete all as specified and directed.

Refixing 20mm bore old steel water tubing and connection in new or old position (walls, ceilling, floor etc) complete all as specified and directed.

Cutting chases for GI consealed water tubing and making good with cement sand mortar 1:3 cutting n exc 10cm girth complete all as specified and directed.

S&F in repairs Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed.

S&F in repairsShelf of PTMT Corner Shelf 8 inch fixed with and including Chromium plated brass screws and wooden/plastic cleats complete all as specified as directed

S & F in repair of 110 mm dia PVC (SWR) pipe single socketed in any length with rubber ring joints laid in trenches,floor and wall including taking down old unserviceable pipe any description and any type complete all as specified and directed.

S & F in repairs PVC (SWR) Pipes single socketed in any length with rubberring joints laid in trenches or in floors and wall 75mm bore including taking down old unserviceable pipe any description and any type complete all as specified and directed.

S&F 110mm dia (bore of pipe) PVC bends (any radius), diminishing pieces or tapers (larger bore measured) with cement joints, complete all as specified and directed.

S & F in repairs PVC (SWR) bends 75mm dia bore any radius with access door complete all as specified and directed.

S & F in repairs PVC (SWR) branch piece, single (single Y) 110 mm dia equal or unequal complete all as specified and directed .

S & F in repairs PVC (SWR) branch piece, single (single Y) 75mm dia equal or unequal complete all as specified and directed .

S&F in repairs 75mm bore PVC (SWR) junction single (Single T) equal or unequal complete all as specified and directed .

S&F in repairs 110mm bore PVC (SWR) junction single (Single T) equal or unequal complete all as specified and directed .

S&F in repairs 110mm bore PVC (SWR) vent cowl complete all as specified and directed .

S&F in repairs 75mm bore PVC (SWR) vent cowl complete all as specified and directed .

S&F in repairs UPVC pipe 40mm bore as in water spouts pipe complete all as specified and as directed.

Taking down shutters of any description exc 1.00 sqm but n.exc 2.00 sqm each and removing form site complete all as specified and directed.

M&L Vitrified ceramic tiles Double charge 8-9 mm thick any shade (square/rectangular) area of each tiles exceedding 0.36 Sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles laid over cement screed 15mm thick in CM 1:6 complete all as specified.

M&L Vitrified ceramic tiles Double charge/s 8-9 mm thick any shade (square/rectangular) area of each tiles exceedding 0.36 Sqm but not exceeding 0.42 sqm in skirting, over 10mm thick screed bed in CM 1:4 on walls set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade as specified and as directed.

E/M PORTION Taking down copper/aluminium point wiring complete etc and removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specified and directed.

Taking down sub main wiring ( copper/aluminium ) with casing caping/PVC conduit etc removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls, floors, etc complete all as specified and directed.

Taking down fixture & fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting bldg light and MCBs etc and removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls, floors, etc all as specified and directed

Taking down SPN DB and removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls, floors, etc. all as specified and directed

M & L for surface point wiring with two single core PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 1.5 sqmm (Nominal area) drawn in and including PVC casing caping of required size with all fittings and accessories alongwith one single core green colour PVC insulated 1100 volt grade multi stranded FRLSH Copper conductor cable of size 1.5 sqmm as earth lead and connected to earth dolly for one light point or one fan point or one call bell point controlled by one, one way switch including PVC switch board of required size or 3mm thick hylam sheet screwed with 04 nos cadmium plated screws & cup washer on existing MS concealled box for mounting of switch, regulators or bell push and casing caping terminal box for mounting ceiling rose/ holders etc all as specified and directed.

All as per item No 82 but 5 amps socket point independent all as specified and directed.

All as per item No 82 but 5 amps socket point on same board as specified and directed.

All as per item No 82 but cable of size 2.5 sqmm for one 16 amps socket (Power) point independent all as specified and directed.

M & L for surface submain wiring with two single core PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 1.5 sqmm (Nominal area) drawn through in and including PVC casing caping/PVC conduit size with all fittings and accessories alongwith one single core green colour PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 1.5 sqmm as earth lead and connected to earth dolly and making good to disturbed surfaces all as specified and directed. NOTE: (a) Two run of cable with one run of earth wire and one run of casing capping/conduit will be measured as one length.

All as per item No 86 but cable of size 2.5 sqmm all as specified and directed.

All as per item No 86 but cable of size 4.0 sqmm all as specified and directed.

S&F 5 Amp switch piano type single pole one way all as specified and as directed.

S&F socket flush type 6 amps, 5 pin, 230v all as specified and as directed.

S&F switch socket combination multipurpose 2-in-1 flush type 3 pin 16 amps and 3 pin 6 amps, 230v i all as specified and as directed.

S&F ceiling rose surface Bakelite three terminal all as specified and as directed.

S&F lamp Holder insulated body with back plate for batten fitting all as specified and as directed.

S&F LED lamp 12 watt, CDL, B-22 cap, (Pin type), 230V, PF-0.95 (min) incl dismentling taking out unsv CFL all as specified and as directed. Make- CG cat part No LED12WDFWB or equivalent to Wipro/ Bajaj

S&F MCB, Single Pole, 6 to 32 amps, 240 volts, 10 kA breaking capacity, "C" curve all as specified and as directed.

S&F MCB, Double Pole, 6 to 32 amps, 415 volts, 10 kA breaking capacity, "C" curve all as specified and as directed.

S&F MCB distribution board, Double door, metal enclosure , SPN, 230 Volts, 8 way all as specified and as directed.

S&F Metal plug and socket board with MCB SP 20 amp, 16 KA all as specified and directed.

S&F LED batten fitting ' 2'long, 10 watt,CDL 230 Volts , complete with all accssories internally pre wired and including connecting up to ceiling rose with 0.5 sqmm two core copper flexible conductor cable with mounting casing box 2 nos all as specified and directed. Make-CG Cat Part No- CCS-103-10-65-HL2-DP-NWH or equivalemt in Bajaj/Philips/Havells

S&F LED fitting, 20 watt, CDL, 230 Volts, 4 feet long , complete with all accssories internally pre wired and including connecting up to ceiling rose with 0.5 sqmm twin core copper flexible conductor cable incl LED lamp and mounting casing box 2 nos all as specified and directed. Make-CG, Cat Part No CCS-100-20-65-HL2-DP-NWH or equivalemt in Bajaj/Havells/Philips

S&F Exhaust fan 300 mm in sweep (Steel body) 230/240 volt AC complete with all acessories including making connection by using flexible wire of size 0.50 sqmm 3 core and making holes, grouting nut bolts in wall for exhaust fan complete all as directed.

S&F electric water heater , storage type steel body with copper inner tank and heating element 2 KW capacity 25 litre, BEE 5 star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece and hot and cold pipe all as specifed and directed.

Vastushilpa Contrustion

ANIL CONSTRUCTION CO.

M/s DEVRATAN ENTERPRISES