PROVISION OF COVERED PARKING SHED AND REST ROOMS AT ICG FUEL COMPLEX AT CAMPBELL BAY UNDER GE (I) CAMPBELL BAY

Amount

Excavation over areas not exceeding 1.5 m deep and getting out in soft/disintegrated rock all as specified and directed

Surface Excavation not exceeding 30 cm deep in hard/ dense soil and averaging 15 cm deep and getting out complete all as specified and directed

Excavation in trenches not exceeding 1.5 wide and not exceeding 1.5m in depth and getting out in hard/dense soil for foundation of poles, structure, stay rods, laying of underground cable etc complete all as directed by Engr-in-Charge.

Returning, filling in soils, including spreading, leveling, watering and well ramming in layers each not exceeding 25cm thick complete all as directed by Engr-in-Charge.

Removing excavated soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as directed by Engr-in-Charge.

Removing excavated surplus soil exc 250m and n.exc 500m deposiitng where directed at a level not exec 1.5m above the starting point complete all as specified and as directed

M&L Hardcore of guage n. exc 63mm, of broken stone or boulders deposited, spread and levelled in layers n.exc 15cm thcik, watered and rammed to a true surface but except material all as specified and directed.

M & L PCC 1:3:6, type C2 (using 40 mm graded agg) 125 mm thick as in foundation,sub base etc complete all as specified and directed.

M&L PCC 1:2:4 type B2 using (40 mm graded aggregate) as in foundation, fillings and mass concrete for hard standing complete all as specified and directed

M&L for form work to sides of concrete foundations, footings, bases of columns, rafts and raft beams, sides and soffits (if any) of foundation and plitnh beams; and similar work as in rough finished surfaces complete all as specified and directed

Use and waste of formwork to sides of pillars, posts, struts, piers, column and stanchions for rough finished surfaces of concrete square, Circular rectangular on plan or polygonal all as specified and directed.

M&L for RCC M-30 design mix using 20mm graded stone aggregate for foundations, including rafts, footings, foundation beams, plinth beams; bases for columns etc basement slabs, under reamed piles and mass concrete complete all as specified and as directed

M&L for RCC M-30 mix (using 20mm graded stone aggregate)of as in columns, pillars, posts & struts complete all as specified and directed

M&L mild steel TMT bars 10 mm dia and over cut to length bent shape as required including cranking bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to Fe-410-S complete all as specified and as directed

-Ditto all as per item No. 6 above but 5 mm dia and over up to and including 10 mm dia in stirrups, spacers and binders complete all as specified and directed

S & F MS sections as in ismc,angle, main and cross beams, hip and jack rafters; purlins,rolled section where connected to common rafters and running rails and guides for truss/colume/ staircase/ladder/anchor bolte for colums/base plates/gussate pltes etc including cutting welding etc; fixed with angle cleats or other connecting plates complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.8mm thick of an colour with two corrugations side lap having tenstile strength of minimum 550 Mpa as in roof covering /cladding to wall, fixed with L-type or J-type or cranked hook bolts in lieu of screws all as specified and as directed

S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.5mm thick of an colour having tenstile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and as directed

M & L for 1.25 mm thick galvanised steel sheet as in Valley gutters fixed with rivets or other suitable arrangements over MS brackets Trapezoidal shape of required profile with desired slope etc complete all as specified and as directed by Engr-in-Charge.

S &F 160 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed.

S&F for PVC (SWR) bends any radius 160mm bore complete all as specified and as directed

M&L Pre-cast cement concrete block masonry Type C-I 1:3:6 (20mm graded aggregate with solid blocks, exc. 10 cm in width and setting in cement mortar 1:4 complete all as specified and directed

M&L for rendering 15mm thick plaster on walls in CM (1:6) finish the surfaces even & smooth (without using extra lime or cement) complete all as specified and as directed

M & L for preparing new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of approved primer on plastered surfaces complete all as specified and directed.

M&L for rendering 20mm thick plaster on walls in CM (1:6), in two coats (15mm thick backing coat + 5mm thick finishing coat) on fair faces of brick work/Pcc cement block, finish the surfaces even & smooth complete all as specified and as directed

M & L for preparing new surfaces of walls and applying two coats of acrylic (antifungal) exterior grade paint over one coat of primer complete all as specified.

M&L for preparing new or previously untreated surface of any description, over 10cm in width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer complete all as specified and directed.

S&F aluminium window,door,partation made out of extruded powder coated (minimum thickness of powder coating 50 micron) aluminium sections, with sliding or openable shutters including frame & necessary jointing cleats, glazing clips, powder coated aluminium snap beading, screws etc; complete and also including powder coated aluminium fittings such as cobra hinges, hooks & eyes, peg stays and star lock for window, etc including connected items, with and including, making good to the disturbed portion with its original specifications, complete all as specified and directed.

S&F 5.5 mm thick, sheet glass, ordinary quality, in any size of pane.

M&L prelaminated 12mm thick particle board exterior grade prelaminated both sides with decorative choice lamination fixed with screws to aluminium frame work complete all as specified and directed

M& L for Machine cut cudappah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L extruded aluminium alloy Butt hinges with glavanised mild steel hinge pin anodized type B-21 fixed 100m long complete all as specified and directed.

S & F extruded aluminium alloy handles fabricated type anodized 150 mm size complete all as specified and directed.

S & F Aluminium alloy barrel tower bolt of extruded type 150 mm long complete all as specified and directed.

S&F 250 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

S&F aluminium (Die cast) body door closer hydraulically regulated designation No. 3, universal type, suitable for door shutters of 851 to 1000mm width and of weight between 61 to 80 Kg and fixed complete all as specified and as directed

S&F aluminium alloy wire cloth, 0.45mm dia of wire and average width of aperture 1.40mm and fixed with aluminium staples complete all as specified and as directed

S&F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet re-inforced with MS square tube suppling and fixing in opening all as specified and directed.

S&F factory made solid panel PVC door shutter 30 mm thick (styled) consisting of frame made out of MS tube for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck in side with salvent cement for stiles and plain colour PVC sheet for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded /sealed to the stiles and rails with suitable PVC sheet bedding and jointed together with solvent cement suppling and fixing in the frame at site all as specified and directed.

M & L for non-skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including 20mm thick screed bed in CM (1:6) etc complete all as specified and directed. complete all as specified and directed

M&L glazed coloured ceramic tiles in vertical surface 300x200x7mm thick as in skirting and dados, set and jointed in neat cement slurry and pointed in coloured cement to match and inlcuding 10mm thick backing coat in CM 1:4 etc complete all as specified and directed

M & L Vitrified ceramic tiles dark shad 10mm thick (square/rectangular) polished, area of each tile not exceeding to 0.36 , in floors/ wall etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with and including 20mm thick screed bed in CM 1:4 complete all as specified. make: Somany Ceramics Ltd

S & F tubes medium grade galvanised with all fitting and fixed complete to walls and ceiling or laid in floors 15 mm bore of pipe complete all as specified and directed.

S&F Wash hand basin vitreous china (flat back) size 550 x 400 mm including brackets waste brass chromium plated with long screwed shanks and fly nuts 32 mm size including Bottle trap of PTMT having minimum water seal of 25mm .(Minimum weight 32mm-260gms/ 40mm-270 gms) complete all as specified and directed.

S & F pillar taps cast copper alloy with capstan heads chromium plated screwed down high pressure with lettered hot or cold with long screwed shanks and fly nuts screwed for iron pipe 15 mm bore of pipe as fixed in repairs complete all as specified and directed.

S&F PVC connection 15 mm bore 450mm long with screwed socket of brass on both ends and rubber washer.

S&F 10 Ltrs capacity PVC flushing cistern white high level with inlet ball valve, float valve and nylon rope including brackets, flush pipe of polythene 32 mm dia of suitable length and making good the disturbed portion all as specified and directed.

S&F bib taps 15 mm dia cast copper alloy with crutch or butter fly handle screwed down for iron pipe or for brass ferrule complete all as specified.

S&F stop valves 15 mm bore cast copper alloy screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe or for union complete all as specified and directed.

S&F vitreous china soap tray embedded in wall with soap dish vitreous china white apprx size 160x160x90mm as fixed complete all as specified and as directed

S & F vitreous china wash down & water closest pan (pedestal pattern) white (Excluding flushing cistern, fixing bolt and flush pipe) of polyetheylene of low or high density or PVC 32mm dia for low level cistern as in salt galzed stoneware gully traps size 125x100mm , square or rounded mouthed tpe 'P' fixed with seat and cover for pedestal pattern complete all as specified incl seat cover including all connected items complete all as specified and as directed

S&F coloured toilet paper holder of vitreous china fixed to walls with chromium plated complete all as specified and as directed

S&F 75mm dia PVC SWR multi floor trap/nahni trap, with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) all as specified and directed

S&F Aluminium locking bolts, anodized, with bolt not less than 10mm dia, 250mm size complete all as specified and directed.

S & F for health faucet ( Jet) 1 m long PVC tube with wall hook chromium plated fitted to stopcock 15 mm bore including two way bib tap complete all as directed.

S&F false ceiling with powder coated exposed GI grid suspension system a grid of 600mmX600mm. Grid of modular size 600mmX600mm shall be supported by 4 mm dia G.I. wire from purlins/soffit with and including 4 mm thick high pressure steam cured non asbestos fiber cement designer ceiling board (Density>1200Kg/Cum) of size 595mmX595mm, (Make : Everest or equvalent as approved by GE)

M&L for Rotational moulded polyethylene 500L water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed .

S&F for vitreous china urinals, bowl type (back or corner wall type,) complete including providing andfixing plugs bedding urinal against wall in cement mortar in 1:2 securing urinals to plugswith and including 60 mm long brass screws, pointing around urinal back in cement , fixing automatic flushing cisternswith brackets, flush pipes, inlet ,outlet etc complete all as specified .

S&F 32mm dia PVC waste pipe for WHB and urinals fixed in repairs complete all as specified and directed.

M&L for viterous china urinal partition white of size 310 x 700mm urinal partions slabs, terminating about 40cm above floor, complete all as specified and directed.

Cutting holes in brick /pcc block walls built in cement mortar, for exaust fans/wc connection/soil west pipe connection exc half brick but n. exc one brick/pcc block and making good dismantled portion in CM 1:3 or coment concrete 1:2:4 type B1 complete all as specified and as directed by Engineer-in-Charge

M & L PCC 1:3:6, type C2 (using 40 mm graded agg) 75 mm thick as in plinth protection finishing without using extra cement complete all as specified and directed.

Material labour for point wiring complete with 1.5 Sqmm PVC insulated unsheathed single core multistranded FRLS copper conductor 1100 V grade drawn through in and including 20 mm dia PVC conduit including all pvc conduit fittings for concealed wiring and terminated to MS box of 1.6 mm thick including cutting chases, holes for conduits and sinking's for boxes, DBs and making good distributed surfaces to walls, floors ectc and 3 mm hlum sheet, for mounting switches, switch sockets combination, regulator etc including 1.5 Sqmm PVC insulated FRLS copper conductor cable as earth continuity conductor and connecting to common earth dolly for light/ fan point/ three pin 5 Amp complete a)One light point controlled by one way 6 Amps swtich

b)One fan point controlled by one way 6 Amps swtich

c)One 3 pin socket out controlled by one way 6 Amps swtich on same board

d)One 3 pin socket out controlled by one way 6 Amps swtich on independent board

Material labour for point wiring complete with 4.0 Sqmm PVC insulated unsheathed single core multistranded FRLS copper conductor 1100 V grade drawn through in and including 25 mm dia PVC conduit all pvc conduit fittings for concealed wiring and terminated to MS box of 1.6 mm thick including cutting chases, holes for conduits and sinking's for boxes, DBs and making good distributed surfaces to walls, floors ectc and suitable hylum sheet with 3mm thickness for fixing of switches sockets etc including 4.0 Sqmm PVC insulated FRLS copper conductor cable as earth continuity conductor and connecting to common earth dolly for power point wiring complete

S&F Switch piano, flush type single pole, one way 6 Amp including necessary screws ,clamps etc.All as specified and as directed.

S&F Switch socket combination 2 in 1, 3/5 pin, 5 Amps flush type including necessary screws,clamps etc

S&F Switch socket combination 3/5 pin, 5/15 Amps flush type including necessary screws,clamps etc

S&F ceiling fan regulator step type,220v,50hz,Ac including necessary screws,clamps etc

M&L for sub main wiring complete with 2 runs of 6 Sqmm PVC insulated heavy duty ISI marked and unsheathed cable with multistranded FRLS copper conductor and drawing through in and including PVC conduit of suitable size and connecting terminal ends to plug sockets and DB's including provision of 1 run of 6 Sqmm insulated FRLS copper cable for earth continuity conductor and connecting to earth dolly complete.

S&F Sheet metal enclosure MCB DB SPN double door type AC 240 v 8-way,200Amps rated bus bar,SPN as incomer flush to wall/surface including lugging,screws,clamps and necessary electrical connections,civil works and making good disturbed surfaces complete all as specified and as directed by Engineer-in-charge.

Supply and fixing 'C' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMPs, complete all as specified and as directed by Engineer-in-charge.

S&F MCB, single pole & neutral, 40 amps, 10 KA, 240 volts 'C' curve complete all as specified .

S&F LED light fitting of capacity not less than 20W, minimum lumens 90 lum/watt, 4 feet length, compatible for mounted on wall/ ceiling/surface, 220V,AC,50Hz, comprising of decorative box type batten (Compitable for T-5/T-8 LED Tubes), bipin holders, LED Tube light with integrated electronic driver, holder, internal wiring connecting up with twin core flexible copper conductor cable of suitable size drawn though flexible PVC conduit suitable size from ceiling rose complete all as directed by Engr-in-Charge

S&F LED light fitting of capacity not less than 9W, minimum lumens 90 lum/watt, 2 feet length, compatible for mounted on wall/ ceiling/surface, 220V,AC,50Hz, comprising of decorative box type batten (Compitable for T-5/T-8 LED Tubes), bipin holders, LED Tube light with integrated electronic driver, holder, internal wiring connecting up with twin core flexible copper conductor cable of suitable size drawn though flexible PVC conduit suitable size from ceiling rose complete all as directed by Engr-in-Charge

S&F of energy efficient 5 Star Rating, BLDC motor, dust proof, Ceiling Fan 1200mm Sweep size, copper winding with minimum air delivery of 210 cu.mtr/min, A.C, single phase, 220 volt 50Hz including canopy reel, flexible copper conductor fixing with necessary lugs drawn through flexible PVC conduit from ceiling rose, including necessary hook, rubber bush & safety pin all necessary accessories complete all as directed by Engr-in-Charge.

S&F of heavy duty exhaust fan, A.C, single phase, 50Hz, 230/240V of size 300mm sweep with minimum 900 rpm with louvres, and wire mesh for suitable size to be fixed before fixing of louvers, including necessary wiring alongwith necessary accessories and necessary civil works alongwith making good disturbed surface etc, complete all as directed by Engr-in-Charge.

S&F of ceiling rose three terminal surface backallite type including cover plate with necessary screws, clamps etc complete all as directed by Engr-in-charge.

M&L earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6mm thick buried directly ground earth pit not less than 2.25mtr deep below normal ground level with top edge of plate not less than 1.5m below ground level, conecting to the Galvanized iron earth wire 4mm dia by means of nuts, bolts,check nuts and washer etc of Galvanized iron and earth lead protected by provision of GI pipe medium grade 15mm bore from eacth elctrode to test point incl provn of concrete pit in PCC (1:2:4) type B-1 using 20mm graded stone aggregates with 40mm thick cover of RCC (1:2:4) reinforced with XPM sheet (weight not less than 4kg/Sqm) and frame of angle iron 25x25x6mm with lugs 2 Nos and with 8mm dia MS bar handle made to shape, GI pipe medium grade 20mm bore pipe for watering perforated at bottom 1.75mtr long placed on top edge of earth plate, common salt and charcoal filling test point with fixing arrangement, funnel, wire mesh and earth work in hard/dense soil, returning in and removal of surplus soil to a distance not exeeding 50mtr, complete all as specified in electrical plate No 3 of SSR Part-I and connection to earth test point including testing on completion all as directed.

Supply and lay GI tubing 50mm dia, light grade for cable protection at road crossing/on poles and tubing sealed at both ends after laying the cables complete al as directed by Engr-in-Charge.

S&F complete LED security lights 36W with electronic driver, 220V,AC,50Hz, not less than 100 lum/watt, High performance low wattage street light with Single Die ceramic base high power LED light source, IP66 protection, PDC housing with finless design and high impact resistance (IK08) Polycarbonate cover with integrated street light optics, compitable for pole dia 40mm dia, incl 40mm dia, 1.5mtr long bend, incl necessary screws, nuts, bolts, suitable size clamps for fixing on wall/surface incl necessary wiring from light to termination point complete all as directed by Engr-in-Charge.

Supply, test, laying & commissioning of XLPE insulated, armoured (heavy duty) electric cable with aluminium stranded conductor, 1100 volts grade, 2 core 16 sqmm laid in trenches/duct/fixed to wall with suitable size clamps/passing through pipe/Tunnel/under ground/surface up to the termination point (as directed by Engr-in-Charge) and cable end terminations crimped with suitable size cable lugs, cable glands with tool, nuts, bolts etc and connecting end terminations to DBs/LT panel/Busbar etc complete all as specified and directed by Engr-in-Charge

S&F of HDPE double wall corrugated pipe confirming to IS-14930 Part with IP protection IP-67 having inner dia 500mm complete terminated up to termination end point completed al as directed by Engr-in-Charge.

M&L cutting of road, hard standing made of concrete or premix carpet, WBM, soiling and morrum filling incl excavation for laying of cable protection pipe all as directed and making good the road/hard standing by using all old/new materials and with PCC (1:2:4) ect, required to match with the existing surface complete all as specified and directed.

Supplying, laying or fixing, GI water tubing 25 mm dia bore, medium grade confirming to IS-1239 [Part-I] incl all fittings such as bends, tees, short pieces, connectors, elbows, reducers, etc laid in trenches/floors or fixed to wall/ceiling/roof etc incl testing GI tubing with fittings/connections, in trenches/ceiling/walls/roofs etc complete.

S&F Gun metal gate valve, with iron wheel head, screwed both ends for iron pipe 25mm bore dia complete

M&L for addition alternation in old existing line of CI/GI pipe, inserted tee compitable for existing original size of pipe line, screwing, cutting, threading fixing of valve, attend the minor work regarding pipe line as per directed by Engr-in-Charge.

T.M.RAMANATHAN AND SONS

Govinda Swamy Construction