Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹4.8 LAccepted-Finance 211 2 NARAYANTALA EAST BAGUIHATI KOLKATA | KOLKATA | WEST BENGAL | 700001 | L1 | Accepted-Finance ACCEPTED AS L1 | |
| 2 | L2₹4.8 L+₹2,615.40 (0.55%)Rejected-Finance 11 PRATAPADITYAPLACE KOLKATA 700026 | L2 | Rejected-Finance REJECTED AS L3 | |
| 3 | L3₹4.8 L+₹7,911.17 (1.66%)Rejected-Finance 171 KATWA ROAD P O DIST BURDWAN | BURDWAN | BURDWAN | WEST BENGAL | L3 | Rejected-Finance REJECTED AS L3 |
Tender Value
Refer Docs
EMD Value
₹10,000
Closing Date
4 Nov 2022, 6:30 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
EXECUTIVE ENGINEER, CMD
EE,CMD,PHED,5 TH FLOOR,PURTA BHAWAN
Supply-delivery-Installation-of-Voltage-correction-device-at-High-lift-side-of-Natungram-Water-supply-Scheme-Block-Ketugram-under-Central-Mechanical-Division-PHE-Dte
2022_PHED_409228_1
WBPHED/EE/CMD/eNIT_19/2022-23
Open Tender
Electrical Work/ Equipment
Item Rate
30 days
NATUNGRAM
Please refer Tender documents.
5 documents required · 5 mandatory
₹10,000
EE,CMD,PHED,5 TH FLOOR,PURTA BHAWAN
10 Nov 2022
11 Oct 2022
9 Nov 2022
11 Oct 2022
4 Nov 2022
14 Oct 2022
14 Oct 2022
Amount
Supply and delivery at site A.C. 3 ph.Oil cooled type Voltage Stabilizer suitable for unbalanced input voltage (Make: AE/Sen & Pandit / Opto Elec. / ECS/Fizi/other Approved Make) a) Input: 200-500 V 3ph. 50HZ, 4 wire b) Output, 415V + 1% 3ph.,50HZ. c) Capacity: 40 KVA. d) Auto manual switch IS - 9815 (I). e) Raise/lower push Button. f) Single lamps to indicate and limits of input. g) Voltmeter for input and output Voltage. (Manufacturing test certificate should be produced at the time of delivery) h) With U/V.O./V.O./L protection with contractor at output side, input MCB & Ammeter etc. ( TC /GC Needed )
Supply and delivery at site the following items:(Approve make of P.H.E Dte.)
a) Change over switch 100 Amps 415V,50 Hz, 4p onload. Make: Havells/ standard/Approve make of P.H.E. Dte.)
b) 100 Amp. Re-wireable type TPN main switch (CONFORMS: IS/IEC600947-1&3). (Make: Approve make of P.H.E. Dte.)
c) 100 Amp. 4 way Copper busbar chamber box by 16 SWG sheet steel enclosure including porcelain chair etc. with painting complete as per direction of the EIC.
d) 16 sq.mm 3.5 core 1.1KV PVC/XLPE insulated aluminium armored cable.
Making brick built foundation with supplying of all required materials suitable for the above Voltage stabilizer by (4:1) cement mortar including holding down foundation bolts (if req.)&plaster with neat cement finish as direction of E.I.C.
Installation of the above stabilizer of item no.1 on the foundation including all connection complete,drawing the cable properly on GI cable tray on wall /as per direction of EIC along with supplying all necessary item including testing complete.
Making joints of the cable by supplying compression type gland thimple,socket etc.as per requirement and as per direction of EIC.
Making earthing arrangement
Earthing with 50 mm dia Gl pipe 3.64 mm thick x 3.04 Mts.long and 1 x4 SWG Gl (Hot Dip) wire (4 Mts. long), 13 mm dia x80 mm long Gl bolts, double nuts, double washers incl. S & F 15mm dla Gl pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above groundlevel driven to an average depth of 3.65 Mts. below the ground level as below: By lSl-Medium Gl pipe.
Extra for providing masonery enclosure on the top of the earthelectrode of overall size 86.36 cm x 86.36 cm x 46 cm deep(below Ground level) complete with cemented brick work(1:6)of 25 cm width duly plastered with cement morter (inside) Cl hinged inspection cover of size 36.56 cm x 35.56 cm withlocking arrangement, Gl reducer including drilling of 46 nos.12 mm dia holes on the Gl pipe.
Extra for treatment of soil by using salt & charcoal or coke forplate electrode.
Connecting the equipments body to earth busbar including S&F 20 mm x 3 mm galvanised (Hot Dip) MS flat on wall/floor with Gl saddles as required and connection to equipments incl.drilling holes, with bolts, nuts, washers etc.
Supplying and fitting-fixing of earth busbar of galvanized (Hot dip) fVS flat 25 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with Gl bolt,nuts,washers,spacing isolator set etc.as required Length of busbar is 0.5 mtr.
Add. GST@18%
Add. Cess@1%
POLYCON ENGINEERS
CHOUDHURY ENTERPRISE
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .