Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹47.0 LAccepted-AOC GROUND FLOOR MH ROAD UDHAMPUR 182101 | UDHAMPUR | JAMMU AND KASHMIR | 182101 | ₹47.0 L Quoted ₹47.6 L | L1 | Accepted-AOC L1 |
| 2 | L2₹48.3 L+₹68,310 (1.43%)Rejected-Finance | ₹48.3 L+₹68,310 (1.43%) | L2 | Rejected-Finance OTHER THAN L1 |
| 3 | L3₹48.7 L+₹1.1 L (2.28%)Rejected-Finance NEAR MES FILTER PLANT SANGOOR UDHAMPUR J K 182101 | UDHAMPUR | UDHAMPUR | J K | 182101 | ₹48.7 L+₹1.1 L (2.28%) | L3 | Rejected-Finance OTHER THAN L1 |
| 4 | L4₹54.7 L+₹7.1 L (15.0%)Rejected-Finance | ₹54.7 L+₹7.1 L (15.0%) | L4 | Rejected-Finance OTHER THAN L1 |
| 5 | L5₹56.2 L+₹8.6 L (18.0%)Rejected-Finance BATHAIPAR RAWATPAR DEORIA DEORIA UTTAR PRADESH 274001 UDYAM UP 21 0039531 | DEORIA | UTTAR PRADESH | 274001 | ₹56.2 L+₹8.6 L (18.0%) | L5 | Rejected-Finance OTHER THAN L1 |
| Sl No | Description | Qty | Unit | PROACH ASSOCIATES BUILDERS & ENGINEERS L4 | FANGALIA TRADERS L3 | ATUL TRADING CO L5 | SATYA SALES AND BUILDERS L2 | M/S DHARAM & SONS ENTERPRISES L1 |
|---|---|---|---|---|---|---|---|---|
| 1.00 | Supply, install, testing and commissioning in replacement of of wire mesh cable tray hot dip galvanised type of size of 105 mm height X 300 mm width, 3 meter length each as per EN 12329 and IEC 61537 with wire diameter of 3.9 to 5.9 mm and having SST of 550 Hrs tested, having E30/E90 certification, with following specification all as per directed by engr in charge
i) C41S/RCSN/R35 (wall/celling/ground mounting supports) every after 1 meter distance.
ii) Kitaster coupler (Jointimg tray) 5 sets per joint.
iii) Down rod of 1 meter length each.
iv) Nuts 3 nos for each rod
v) COUPFIL(Cutter) 01 No.
vi) L supports for wall with all accessories such as nut bolt washers etc.
Note:-
a) Shifting of all existing HT and LT cables, Removing connections of these cables and refixing at its original position through cable trays in a proper manner all as directed by engr in charge is included in the quoted rates.
b) All major and minor spares are required in laying of cables and fixing of cable trays which are not mention above are included in the quoted rates.
c) All meterial such as cement, concerete, tiles etc to make wall/roof /ground in its original shape after fixing of cable trays are included in the quoted rates | 110 | RM | 3,800 ₹4,18,000 | 5,000 ₹5,50,000 | 5,200 ₹5,72,000 | 6,400 ₹7,04,000 | 3,300 ₹3,63,000 Lowest |
| 2.00 | Supply, install, testing and commissioning in replacement of wire mesh cable tray hot dip galvanised type of size of 105 mm height X 400 mm width, 3 meter length each as per EN 12329 and IEC 61537 with wire diameter of 3.9 to 5.9 mm and having SST of 550 Hrs tested, having E30/E90 certification, with following specification all as per directed by engr in charge
i) C41S/RCSN/R35 (wall/celling/ground mounting supports) every after 1 meter distance.
ii) Kitaster coupler (Jointimg tray) 5 sets per joint.
iii) Down rod of 1 meter length each.
iv) Nuts 3 nos for each rod
v) COUPFIL(Cutter) 01 No.
vi) L supports for wall with all accessories such as nut bolt washers etc.
Note:-
a) Shifting of all existing HT and LT cables, Removing connections of these cables and refixing at its original position through cable trays in a proper manner all as directed by engr in charge is included in the quoted rates.
b) All major and minor spares are required in laying of cables and fixing of cable trays which are not mention above are included in the quoted rates.
c) All meterial such as cement, concerete, tiles etc to make wall/roof /ground in its original shape after fixing of cable trays are included in the quoted rates | 80 | RM | 4,300 ₹3,44,000 | 6,000 ₹4,80,000 | 6,500 ₹5,20,000 | 6,900 ₹5,52,000 | 3,800 ₹3,04,000 Lowest |
| 3.00 | Supply ,fabricating and fixing in repairs cross arms ( any type) supports, bracing, stiffeners anti climbing spikes, LT Panel Door, hinge with welding, Chequred Plates, MS Iron Angle frame made out of MS channel, angle iron, flat of any size including drilling of holes making clamps including eye hooks, nuts bolts and washers etc welding if required including painting with two coats of Synthetic Enameled paint (any shade as per site Requirement) over a coat of red oxide primer. | 2 | Qtl | 4,000 ₹8,000 Lowest | 7,000 ₹14,000 | 7,800 ₹15,600 | 12,500 ₹25,000 | 10,500 ₹21,000 |
| 4.00 | Supply and fixing PVC insulation tape red,yellow, blue colour 25 mm 25 mtr length tape Roll Lall, complete all as specified and directed by Engr-in-Charge. | 100 | Each | 90 ₹9,000 | 70 ₹7,000 | 80 ₹8,000 | 28 ₹2,800 Lowest | 40 ₹4,000 |
| 5.00 | S&F double walled corrugated (DWC) pipe of size 120 mm including snap fit coupler conforming to IS14930 (Pt-II)/IS16205 Pt-II for protection of LT cable in under ground/floor , complete all as specified and directed by Engr-in-Charge.
Make: REX/Tirupati Plastomatics Pvt Ltd | 100 | RM | 98 ₹9,800 | 200 ₹20,000 | 98 ₹9,800 | 95 ₹9,500 Lowest | 160 ₹16,000 |
| 6.00 | S&F double walled corrugated (DWC) pipe of size 77 mm including snap fit coupler conforming to IS14930 (Pt-II)/IS16205 Pt-II for protection of LT cable in under ground/floor, complete all as specified and directed by Engr-in-Charge.
Make: REX/Tirupati Plastomatics Pvt Ltd | 50 | RM | 70 ₹3,500 Lowest | 100 ₹5,000 | 75 ₹3,750 | 100 ₹5,000 | 110 ₹5,500 |
| 7.00 | S&F double walled corrugated (DWC) pipe of size 50 mm including snap fit coupler conforming to IS14930 (Pt-II)/IS16205 Pt-II for protection of LT cable in under ground/floor, complete all as specified and directed by Engr-in-Charge.
Make: REX/Tirupati Plastomatics Pvt Ltd | 50 | RM | 55 ₹2,750 | 80 ₹4,000 | 50 ₹2,500 Lowest | 85 ₹4,250 | 70 ₹3,500 |
| 8.00M&L for in replacement of copper thimble (Lugs) suitable for Cable of following sizes, complete all as specified and directed by Engr-in-Charge. | ||||||||
| 9.00 | Description all as per ser item No 8.00 here-in-before but size 70 sqmm to 95 Sqmm | 48 | Each | 60 ₹2,880 | 200 ₹9,600 | 65 ₹3,120 | 50 ₹2,400 Lowest | 85 ₹4,080 |
| 10.00 | Description all as per ser item No 8.00 here-in-before but size 120 Sqmm | 48 | Each | 70 ₹3,360 Lowest | 250 ₹12,000 | 90 ₹4,320 | 80 ₹3,840 | 120 ₹5,760 |
Tender Value
₹50.0 L
EMD Value
₹99,980
Closing Date
4 Feb 2026, 6:00 pmClosed
GE (Utilities) Udhampur
GE (Utilities) Udhampur PO-GARHI PIN-182121
Repair Maint of switch gear, control panels and other allied works at Tawi, Garhi water supply installation under GE (Utilities) Udhampur
2025_MES_745515_2
GE/U-84/2025-26
Open Tender
Miscellaneous Works
Item Rate
120 days
GE (Utilities) Udhampur
AS PER NIT
8 documents required · 8 mandatory
₹500
GE (Utilities) Udhampur
₹99,980
27 Feb 2026
21 Jan 2026
6 Feb 2026
21 Jan 2026
4 Feb 2026
28 Jan 2026
Select, Excess (+), Less (-) Less (-)
Tender Inviting Authority: GE Utilities Udhampur
NAME OF WORK : Repair/Maint of switch gear, control panels and other allied works at Tawi, Garhi water supply installation under GE (Utilities) Udhampur
Contract No: GE/U-84/2025-26
serial. No. Item Description Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+serialvice Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT Without Taxes TOTAL AMOUNT TOTAL AMOUNT In Words
Supply, install, testing and commissioning in replacement of of wire mesh cable tray hot dip galvanised type of size of 105 mm height X 300 mm width, 3 meter length each as per EN 12329 and IEC 61537 with wire diameter of 3.9 to 5.9 mm and having SST of 550 Hrs tested, having E30/E90 certification, with following specification all as per directed by engr in charge i) C41S/RCSN/R35 (wall/celling/ground mounting supports) every after 1 meter distance. ii) Kitaster coupler (Jointimg tray) 5 sets per joint. iii) Down rod of 1 meter length each. iv) Nuts 3 nos for each rod v) COUPFIL(Cutter) 01 No. vi) L supports for wall with all accessories such as nut bolt washers etc. Note:- a) Shifting of all existing HT and LT cables, Removing connections of these cables and refixing at its original position through cable trays in a proper manner all as directed by engr in charge is included in the quoted rates. b) All major and minor spares are required in laying of cables and fixing of cable trays which are not mention above are included in the quoted rates. c) All meterial such as cement, concerete, tiles etc to make wall/roof /ground in its original shape after fixing of cable trays are included in the quoted rates BI01010001010000000000000515BI0100001135 RM 0.0000 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos
M&L for in replacement of copper thimble (Lugs) suitable for Cable of following sizes, complete all as specified and directed by Engr-in-Charge. BI01010001010000000000000515BI0100001142 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos
M&L for in replacement of PVC insulated heavy duly industrial multistandard cable single core copper conductor (flexible) 1100 volt grade of following sizes complete all as specified and directed. BI01010001010000000000000515BI0100001146 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos
Description all as per ser item No 12.00 here-in-before but size 95 Sqmm BI01010001010000000000000515BI0100001147 Each 0.0000 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos
Please Enable Macros to View BoQ information
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.29 MB
TENDER84.pdf
Tender Documents • 1.29 MB
BOQ_839448.xls
BOQ • 0.42 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .