Item Rate Annual Tender for Removing leakages of drinking water supply GI DIand CI 5mm to 350 450 mm Pipe lines of various diameter and supplying plumbing related material to Satara Municipal Council

Amount

nic e tendering system

Excavation for foundation / pipetrenches in earth, soils of all type, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, normal dewatering, preparing the bedforfoundationandexcluding back filling etc, complete (Bd-A-1/259) Lift 0 to 1.5 M

Excavation for foundation / pipetrenches in hard murum and boulders, W.B.M. road including revoving theexcavated material upto a distanced of 50 M beyond the area and lifts as below, stacking and spreading as directed by Engineer-in-charge, normaldewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (Bd-A-2/259) Lift 0 to 1.5 M

Excavtion for foundation / pipetrenches in soft rock and old cementand lime masonry foundation asphalt road including removing the excavatedmaterial upto a distance of 50 M beyondthe area and lifts as below, stacking asdirected by Engineer-in-charge, normal dewatering, preparing the bed forfoundation and excluding backfilling,etc. complete.(Bd-A-4/259) Lift 0 to 1.5 M

Excavation for foundation / pipetrenches in hard rock and concrete roadby chiselling, wedging, line drilling by mechanical means or by all meansotherthanblasting including trimmingand levelling the bed, removing the excavated material upto a distance of 50 metresbeyond the area and lifts asbelow, stacking as directed by Engineer-in-charge, normal dewatering, excluding backfilling, etc. complete by all means. (Bd-A-6/259) Lift 0 to 1.5 M

Refilling the trenches with avaliable excavated stuff with soft material firstover pipeline and then hard material in 15 cm layers with all leads and liftsincluding consolidation, surcharging, etc. complete by all means.

Desilting the Supply Well, Intake Well / Head Works, Sump of water supply / sewerage works,GSR,ESR, Filter Tank etc. in wet or dry condition including lifts upto 9 M and lead upto 150 M as required beyond the work site, stacking, spreading, including necessary guarding, etc. complete, as directed by Engineer-in-charge.

Lowering, laying and jointing G.I. pipes and specials of following class and diameter including conveyance from stores to site of works, all labour, giving satisfactory hydraulic text, ct. complete, either underground or invertical position as directed by Engineer-in-charge. MEDIUM i) 15mm

iii) 25mm

vii) 65mm

viii)80mm

Lowering, laying and jointing HDPE / MDPE pipes in proper position including all specials by compression fitting / electrofusion and buttfusion jointing procedurei ncluding hydraulictesting as per relevant lS code complete with all materials for jointing procedures like Electro fusion machine, Electric mirrior/heater, Butt fusion weld in machine with hydraulic jack, top loading clamp, etc, pump and accessories for hydraulic testing and all labour as directed by Engineer i) 20mm

iii) 32mm

vii)75 mm

viii)90mm

Lowering laying and jointing with SBR rubber gaskets C.I.,S/S, DIK7,DIK9 pipes of variousclasses with CI/MS specials of following diameters in proper position, grade position, grade and alignment as directed by Engineer in charge including the conveyance of materials from stores to site of work, including cost of jointingmaterials and rubber rings, labour giving hydraukic testing, etc complete. with rubber ring i) 80mm

iii) 125mm

vii)300mm

Making cross connection to existing distribution main of any type including excavation, breaking and removing existingpipes, lowering, laying of specials and pipes in their position refilling, closing the water supply in thatares, dewatering and restarting the water supply, etc complete as directed by Engineer in charge for following diamers of existing pipelline, irrespective of diameter of branch line ( the number of joints involved will bepaid separately depending upon the nature of joints and required pipes is and specials will be supplied free of stores. i) 80mm

iii)125mm

vii) 350 mm

viii) 400 mm

Lowering laying and jointing in position following C.I. D.F / reflux valves and sluice valvesincluding cost of all labour, jointing material, including nutbolts and giving satisfactory hydraulic testing etc complete (Rate for all class of valves)I)50 mm

iii) 80mm

vii)200mm

viii) 250mm

xii)450mm

Dismantling dead pipeline of MS/RCC/CI/PSC pipe includingcost of necessary excavation and refilling of trenches, the excavated trenches breaking the joints, lifting the pipes and stacking to the place as directed by Engineer-in-chargewith all leads and lifts including cleaning the surfacem etc. complete. for MS/RCC/CI/PS i)80mm

iii)125mm

vii)300mm

vii)350mm

Dismantling dead pipeline of GI/AC/PVC/SW/HDPE pipe includingcost of necessary excavation and refilling of trenches, the excavated trenches breaking the joints, lifting the pipes and stacking to the place as directed by Engineer-in-chargewith all leads and lifts including cleaning the surfacem etc. complete. for GI/AC/PVC/SW/HDPE i)80mm

iii)125mm

vii)300mm

vii)350mm

Lowering laying and jointing with CID joints, AC pressure pipes and CI or MS specials of following class and diameters including convervance fromstores to site of works cost of labourand material giving satisfactorhydraulic testig etc as per ISI as per ISI code tec complete but excluding cost of CID joints nut bolts rubber rings Class 15 (Test Pressure 1.5 MPa) i) 80mm

iii)125mm

vii)300mm

viii)350mm

providing and laying in situ cement concrete of trap/granite/quartzite/gneiss metal for RCC work in foundation like raft, grillage, strip foundation and footing of RCC columns and steel stanchions including normal dewatering plywood form work, compaction, finishing and curing, etc. complete.(By weigh batching and mix design for M-250 and M-300 only. Use of L & T, A.C.C., Ambuja, Birla Gold, Manikgad, Rajashree, etc, cement is permitted. 1)in RCC M-150

In RCC M-200

Providing and making lead caulked joint with molten lead to Cast Iron pipes and / or specials of all classses and fitting of following dia including cost of lead and all jointing material, labour, hydraulic testing etc. complete. i) 80 mm

Supply of /C.I. Mechanical compressioncollar coupling/ socket jiffy joint with the plain barrel of C.I. spun Pipes etc. and DI pipes complete with sealing rubber gasket of SBR,CI follower glands with M.S Nutbolts. 1)80 mm dia

100 mm dia

125 mm dia

150 mm dia

200 mm dia

250 mm dia

300 mm dia

350 mm dia

400 mm dia

450 mm Dia

providing and supplying Air valve as per IS 10845 and MJP Std Specification etc completeType PN-1.6 i ) 12/15 MM

Supply of /C.I. Mechanical compression flanges / socket tail piece suitable for making flanged connection with plain barrle of CI spun pipe and DI pipe.Tailpiece tobe supplied complete with sealing rubber gasket of SBR ,CI follower glands with M.S Nutbolts. i) 80 mm dia

100 mm dia

125 mm dia

150 mm dia

200 mm dia

250 mm dia

300 mm dia

350 mm dia

400 mm dia

450 mm Dia

Providing and supplying ISI marked D.I.S & S pipes (Push joint pressure pipes of D.I. of following class and diameters conforming to the IS specifications inclusive of the cost of jointing materials (rubber gasket of EPDM quality) including all staturoty duties and taxes levied by Govt. of India and Govt. of Maharashtra in all respect, education cess, GST, Third party inspection charges of TPI agency approved by MJP, includding transit insurance, railway freight, unloading from railway wagon, loading into trucks, transport to department stores / site of work, unloading, stacking, etc. complete, as directed by engineer-incharge. (IS-1536/2001 for pipes and IS 158/1969 and IS 12820/1989 or Latestedition / revision with amendments for rubber gaskets) D.I. K-7 grade With E.D. without E.D.i) 100 mm

iii) 200mm

vii) 400 mm

viii) 450mm

Providing and supplying ISI standard marked D.I. Specials and fittings with sealing rubber gasket of S.B.R. complete with Cast Iron follower gland and M.S. nutbolts coated or otherwise protected from rusting and suitable for D.I. pipes including cost of labour, material and tansportation to stores/site, loading, unloading including all taxes, GSTetc. complete as per IS-9523. C Plain ended / plain ended branch flanged specials a) 80 to 300 mm dia

b) 350 mm and above dia

Providing and supplying ISI standard D.I. Specials and fittings with sealing rubber gasket of S.B.R. complete with Cast Iron follower gland and M.S. nut bolts coated or otherwise protected from rusting and suitable for D.I. pipes including cost of labour, material and transportation to stores / site, loading, unloading including all taxes, GST etc. complete as per IS-9523 for all typer of specials, bends, tees, etc a) 80 to 300 mm dia

b) 350 mm and above dia

Providing and supplying C.I. detachable joints suitable for A.C. pressure pipes manufactured as per IS-1538/1993 standards of following class and diameter including cost of insurance, railway freight, inspection charges, unloading from railway wagon, loading into truck, transporting to departmental store / site, unloading, stacking and cost of rubber rings, nut bolts, etc. complete. (IS-1538/1993) A class 15 ( Test Pressure 1.5 MPa) with E.D. i) 80 mm

Providing and supplying in standard length polyethelene pipes (H.D.P.E.) with necessary jointing material like mechanical connectors i.e. thread/ insert joint / quick release coupler joint compression fitting joint or flanged joint including trasportation and freight charges, inspection charges, loading /unloading charges, conveyance to the departmental stores/ site and stacking the same in closed shade duly potecting from sunrays and rains etc complete 10 kg/cm2 with E.D.i) 32 mm

Providing and supplying Blue MDPE pipes conforming to ISO 4427/1996 manufactured from virgin resin PE-80 food grade compounded rw material having blue colou only with quality assurance certificate. For usage in drinking water system including trasportation and freight charges, inspection charges, loading /unloading charges, conveyance to the departmental stores/ site and stacking the same . PN16 (SDR 9) with E.D i) 20 mm

Providing and supply of electrofusion fittings in accordance with BS EN12201/ Part -3 suitable fo drinking water with min PN 12.5 rated for water application etc. COUPLERS i) 20 mm

Providing and supply of electrofusion fittings in accordance with BS EN12201/ Part -3 suitable fo drinking water with min PN 12.5 rated for water application etc. EQUAL TEE i) 20 mm

Providing and supply of electrofusion fittings in accordance with BS EN12201/ Part -3 suitable fo drinking water with min PN 12.5 rated for water application etc. ELBOW 90 DEG. i) 20 mm

Providing and supply of electrofusion fittings in accordance with BS EN12201/ Part -3 suitable fo drinking water with min PN 12.5 rated for water application etc. END CAP. i) 20 mm

Supply of C.I. Mechanical joint double socket 90 Deg. (1/4) bends as per IS-1332/1992 complete with sealing rubber gaskets od SBR with cast iorn follower gland and mild steel nut bolts coated o otherwise protected from rusting nd suitable fo C.I. pipes i) 80 mm

Supply of C.I. Mechanical joint double socket 45 Deg. (1/8) bends as per IS-1332/1992 complete with sealing rubber gaskets od SBR with cast iorn follower gland and mild steel nut bolts coated or otherwise protected from rusting nd suitable fo C.I. pipes i) 80 mm

Supply of C.I. Mechanical joint all socket Tees as dimensionally described in IS-13382/1992 comlete with sealing rubbe gaskets of SBR with cast ion follower gland and mild steel nut bolts coated or otherwise protected from rusting nd suitable fo C.I. pipes i) 80x80x80 mm

Providing and supplying ISI mark rubber gasket suitable for C.I. or D.I. pipes of all class for tyton joints incluiding inspection charges, transportation to departmentl stores site etc SBR gaskets for CI/DI pipes i) 80 mm

Providing and supplying ISI mark rubber gasket suitable for C.I. or D.I. pipes of all class for tyton joints incluiding inspection charges, transportation to departmentl stores site etc Sealing 'O' Rings of SBR (for CID joint) i) 80 mm

Providing and supplying ISI mark rubber gasket suitable for C.I. or D.I. pipes of all class for tyton joints incluiding inspection charges, transportation to departmentl stores site etc Flat flanged gaskets moulded out of SBR (for Flanged Joints) i) 80 mm

Providing and supplying ISI mark rubber gasket suitable for C.I. or D.I. pipes of all class for tyton joints incluiding ll taxes with GST(central and local), inspection charges, transportation to departmentl stores site etc EPDM Gaskets for C.I./D.I. Pipes i)80 mm

Providing ISI mrk G.I. pipes of following class and dia.incluiding Inspection charges, Transportation to stors ets. With E.D.Complete (IS-1239/2004) Medium Class i) 15 mm

Providing double Flanged Sluice valves conforming to IS-2906/14846 incluiding worm gear arrangements as per test pressure, stainless steel spindle, caps, including all taxes with GST , transportation etc complete Sluice Valve PN1.0 (Without Bypass arrangement) i) 50 mm

Providing double Flanged Sluice valves conforming to IS-2906/14846 incluiding worm gear arrangements as per test pressure, stainless steel spindle, caps, including all taxes with GST, transportation etc complete Sluice Valve PN1.6 (Without Bypass arrangement) i) 50 mm

Providing and supplying D.I. fittings with ISI mark mechanical joint confirming to tables 12 to table31 of IS 9523/200 incluiding cost of SBR/Gasket,nutbolts, incluiding transportation and incluiding all etc. complete MJ Collar Coupling i) 80 mm

Providing and supplying D.I. fittings with ISI mark mechanical joint confirming to tables 12 to table31 of IS 9523/200 incluiding cost of SBR/Gasket,nutbolts, incluiding transportation and incluiding all statutary duties and taxses such as Gst levied bi GOI and GOM in all respect etc. complete Double socket bend 90 degree i) 80 mm

Providing and supplying D.I. fittings with ISI mark mechanical joint confirming to tables 12 to table31 of IS 9523/200 incluiding cost of SBR/Gasket,nutbolts, incluiding transportation and incluiding all statutary duties and taxses such as Gst levied bi GOI and GOM in all respect stc. complete Double socket bend 45 degree i) 80 mm

Providing and supplying D.I. fittings with ISI mark mechanical joint confirming to tables 12 to table31 of IS 9523/200 incluiding cost of SBR/Gasket,nutbolts, incluiding transportation and incluiding all statutary duties and taxses such as Gst levied bi GOI and GOM in all respect etc. complete Double socket bend 22.5degreei) 80mm

Providing and supplying D.I. fittings with ISI mark mechanical joint confirming to tables 12 to table31 of IS 9523/200 incluiding cost of SBR/Gasket,nutbolts, incluiding transportation and incluiding all statutary duties and taxses such as Gst levied bi GOI and GOM in all respect etc. complete Double socket concentric reducer i) 100 X80

Providing and supplying D.I. fittings with ISI mark mechanical joint confirming to tables 12 to table31 of IS 9523/200 incluiding cost of SBR/Gasket,nutbolts, incluiding transportation and incluiding all statutary duties and taxses such as Gst levied bi GOI and GOM in all respect etc. i)80x80x80 mm

Providing and supplying M.S. Fabricated 'U' clips for sizes ranging from 100mm to 600 mm with necessary jointing arrangement

Manufacturing, providing and supplying spirally welded/ERW / SAW / fabricated M.S. pipes (Commercial Quality)including procurement of plates, gas cutting to requiredsize, rolling, tack welding, assembling in suitable lengths to form pipes, welding on automatic welding machine andforming 'V' edge on both ends of pipes including all taxes(Central and local), railway freight, insurance, unloadingfrom railway wagon, loading into truck, transport to stores/ site, unloading, stacking, etc. complete as per IS-3589and IS-5504 as applicable as per specifications (No negative tolerance in thickness is permissible).

Lowering, laying in position to correct line and M.S.pipes with/withoutanyoutcoating, on pedestals or chairs upon piers, trestles, etc. heratetoincludeloading,unloading,hoisting,marginal cutting wherever required, assembling, tack welding and transportation upto 500 M, etc. complete. (5mm to 8mm Thickness) i) upto 250mm

ii) 250 mm to 500 mm

Providing and applying pipe coating of fibres, coal tar and solvent based rubber modified bituminous primer of density 0.92 gms/cu cm and viscosity of 1000-2000 cps @ 150 gms/sqm followed by seven layers(4mm thick) of polythene polymerised bitumen and polyester of local 7 layers) pipe coat 4 mm should conform to requirement of IS-10221 and AWWA C-203 for pre- fabricated tapes including covering cost on pipe coating. Rates shall include cost of material coating and wrapping over the pipes, handling charges, preparation of pipe surface, all labour, material, etc. complete.

Providing and making inner cement mortar lining to M.S. pipes with mechanical devices in cement mortar 1:1 proportion, including cost of all materials, labour, special sand required, machinery, power generation, all equipments and taking neces- sary access openings and manholes, cuts at suitable intervals as directed by Engineer-in-charge and rewelding the same after done with doubler plates pipes including necessary excavation, refilling concrete breaking and remaking if any, break- ing guniting and remaking the same, repainting wherever re- quired with epoxy paint in 3 coats, all dewatering including emptying the pipeline and refilling the same after done with (water to be supplied by department free of cost within 5 km. lead at fixed point and all other arrangements to be done by agency), including carrying out “C” value performance test of pipeline, complete job as per the directions of the Engineer- in-charge i)9 mm thick for pipes upto 700 mm dia.

Providing and applying one coat of zinc rich epoxy primer to the internal surface of pipe line at site.

Providing and applying primer and one coat of red oxide of iron paint externally including cleaning the surface of the pipes with steel scrappers, wire brushes, and metal cleaning solution, etc.

Providing and supplying Air Valves as per IS- 14845 and MJP’s standard specifications double orifice type combined with screw down isolating valve, small orifice elastic ball resting on a gun metal orifice nipple, large orifice vulcanite ball seating on moulded seat ring, inlet face and drilled, including insurance, third party inspection charges, loading, unloading,transportation upto departmental stores, excluding GST levied by GOI & GOM in all respect etc. complete. a ) Air Valve Double Ball Flanged Type - PN -1 1) 50 mm

b)Air Valve Double Ball Flanged Type - PN -1.6 1) 50 mm

Providing and supplying Air Valves as per IS- 14845-2000 and MJP’s standard specifications double orifice type combined with isolating sluice valve, mounted in horizontal position and operated by wheel gear- ing, small orifice elastic ball resting on a gun metal orifice nipple, large orifice vulcanite ball seating on moulded seat ring, inlet face and drilled, including insurance, third party inspection charges, loading, unload- ing, transportation upto departmental store, excluding GST levied by GOI & GOM in all respect etc. complete.. a) Air Valve Double Ball Flanged Type - PN -1 1)100mm

a) Air Valve Double Ball Flanged Type - PN -1.6 1)100mm

Providing and supplying Air Valves as per IS- 14845-2000 and MJP’s standard specifications double orifice type combined with isolating sluice valve, mounted in horizontal position and operated by wheel gear- ing, small orifice elastic ball resting on a gun metal orifice nipple, large orifice vulcanite ball seating on moulded seat ring, inlet face and drilled, including insurance, third party inspection charges, loading, unload- ing, transportation upto departmental store, excluding GST levied by GOI & GOM in all respect etc. complete.a) Kinetic Air Valve Flanged Type - PN -1 1) 40mm

b) Kinetic Air Valve Flanged Type - PN -1.6 1) 40mm

Providing and supplying Kinetic Double Orifice type Air Valves confirming to IS 14845 as per MJP’s stan- dard specifications having small orifice elastic ball resting on a gun metal orifice nipple, large orifice vulcanite ball seating on moulded seat ring,with built-in Kinetic features, isolating sluice valve mounted in horizontal position and operated by wheel gearing, inlet face and drilled, including insurance, third party inspection charges, loading, unloading, transportation upto departmental stores, excluding GST levied by GOI & GOM in all respect etc. complete. a)Kinetic Air Valve Flanged Type - PN -1 i)100 mm.

iii) 200 mm.

b)Kinetic Air Valve Flanged Type - PN -1.6 i)100 mm.

iii) 200 mm.

Lowering, laying and fixing in proper alignment and position all types of C.I. air valves as directed by Engineer-in-charge including cost of conveyance from stores to site of work, cost of all material and giving satisfactory hydraulic testing, etc. complete. (for all class of valves) a)Air Valve Single Ball (PN-1 and PN - 1.6) i)15 mm.

iii) 25 mm.

vii) 65 mm.

viii) 80 mm.

xii) 200 mm.

b)Air Valve Double Ball (PN-1 and PN - 1.6) i)15 mm.

iii) 25 mm.

vii) 65 mm.

viii) 80 mm.

xii) 200 mm.

c) Kinetic Air Valve (PN-1 and PN - 1.6) i)40 mm.

iii) 65 mm.

vii) 150 mm.

viii) 200 mm.

Providing erecting Cast Steel/ Spheroidal Graphite (S.G) Iron D/F Sluice Valves / Butterfly Valves with jointing to pipe work (including all hardware and packing) water works quality, having non-rising spindle with hand wheel and without bypass arrangement, spindle of stainless steel as per requirement, inspection charges, transportation upto departmental store, unloading, stacking, excluding GST levied by GOI & GOM in all respect etc. excluding C. C. foundation / structural steel support. For Rating Class 150 (Working Pressure 20 kg/cm2 and Test Pressure 30 kg/cm2) a)Sluice Valves i)80 mm dia.

ii)100 mm dia.

iii) 150 mm dia.

iv)200 mm dia.

v)250 mm dia.

vi)300 mm dia.

vii) 350 mm dia.

viii) 400 mm dia.

ix)450 mm dia.

Providing erecting Cast Steel D/F Sluice Valves / Butterfly Valves with jointing to pipe work (including all hardware and packing) water works quality having non-rising spindle with hand wheel and without bypass arrangement, spindle of stainless steel as per requirement, inspection charges, transportation upto departmental store, unloading, stacking, excluding GST levied by GOI & GOM in all respect etc. excluding C. C. foundation / structural steel support For Rating Class 300 (Working Pressure 52 kg/cm2 and Test Pressure 78 kg/cm2) a)Sluice Valves CS-300 i)80 mm

iii) 150 mm

vii) 350 mm

viii) 400 mm

Providing erecting Cast Steel /Spheroidal Graphite (S.G.) Iron D/F Reflux Valves Single Door with jointing to pipe work (including all hardware and packing) water works quality with jointing to pipe without bypass arrangement, with gunmental seats including inspection charges, transportation upto departmental store, unloading,stacking excluding GST levied by GOI & GOM in all respect etc. completed but excluding C. C. foundation / structural steel support For Rating Class 150 (Working Pressure 20 kg/cm2 and Test Pressure 30 kg/cm2) Reflux valve CS-150 i)80 mm

iii) 150 mm

Providing erecting Cast Steel D/F Reflux Valves Single door with jointing to pipe work (including all hardware and packing) water works quality with jointing to pipe without bypass arrangement, with gunmetal seat including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. completed but excluding excluding C. C. foundation / structural steel support.For Rating Class 300 (Working Pressure 52 kg/cm2 and Test Pressure 78 kg/cm2) Reflux valve CS-300 i)80 mm

iii) 150 mm

Providing, erecting Kinetic Double Orifice Cast Steel Air Valves with an isolating Sluice Valve mounted in horizontal position operated by wheel gear suitable for working pressure of Class-150 rating (20 kg/cm2) Air valve CS-150 i)80 mm

iii) 150 mm

Providing, erecting Kinetic Double Orifice Cast Steel Air Valves with an isolating Sluice Valve mounted in horizontal position operated by wheel gear suitable for working pressure of Class 300 rating (52 kg/cm2) KDB Air valve CS-300 i)80 mm

iii) 150 mm

Providing and fixing in position air valve shaft including providing and fixing GI Medium Class or 6 mm thick M.S. pipe shaft 2.70 M long over branch flange of air valve tee, providing PCC block of M-150 concrete, 150 mm thick around the air valve tee including encasing of vertical shaft in PCC M-150 as shown in type design together with providing and making flanged joints wherever required and fixing of air valve tee, etc. complete as per type design and as directed by Engineer -in- charge for following diameters of pipe lines (type design attached.) a)Foundation on Murum and Harder Strata. i)upto 150mm

ii)200 to 400 mm

iii) 450 to 900mm

iv)1000 to 1200 mm

b)Foundation in B. C. Soil or Any Other Soil. i)upto 150 mm

ii)200 to 400 mm

iii) 450 to 900 mm

iv)1000 to 1200 mm

Providing and supplying C.I. D/F angle type spring loaded pressure relief valves of approved make and quality including inspection charges, transportation to departmental stores excluding GST levied by GOI & GOM in all respect etc. complete.a)Type PN-1 i)25 mm

iii) 50 mm

vii) 150 mm

viii) 200 mm

b)Type PN-1.6 i)25 mm

iii) 50 mm

vii) 150 mm

viii) 200 mm

Lowering, laying and fixing in proper alignment and position all types of C.I. D/F angle type spring loaded pressure relief valves including cost of all material, labour, cost of conveyance from stores to site of work and giving satisfactory hydraulic testing, etc. complete. (For all class of valves.) i)25 mm

iii) 50 mm

vii) 150 mm

viii) 200 mm

Providing and fixing in position and jointing high performance C. I. Air valves for water combination type ( Kinetic air valve along with automatic air valves ) double ball, double orifice with stainless steel ball, tamper proof air vents rolling seal mechanism for air release and anti vacuum application designed for 16 Kg. Per sq. cm. working pressure and tested for 20 for kg per sq. cm. pressure. ( Rate to include cost of gaskets, bolt, nut and any other material required for jointing and its transportation etc. excluding GST levied by GOI & GOM in all respect. i)C. I. ARV FLFF PN 1.6 50mm Dia.

ii)2. C. I. ARV FLFF PN 1.6 80mm Dia.

iii) 3. C. I. ARV FLFF PN 1.6 100mm Dia.

iv)4. C. I. ARV FLFF PN 1.6 150mm Dia.

v)5. C. I. ARV FLFF PN 1.6 200mm Dia.

Providing and supplying at site of ductile iron / spheroidal graphite (S.G.) iron D/F non-rising spindle resilient seated glandless sluice valves with handwheel & without bypass arrangement. Valves in accordance with BS 5163 of PN-10/ 16 rated, with body and bonnet of ductile iron confirming to IS 1865 Gr. 500/7 or Gr.400/ 15. Wedge fully encapsulated WRAS approved EPDM rubber (approved for drinking water), Wedge nutof brass, shaft of stainless steel1.4021/1.4104, stem seals min. 3 nos. of NBR, internal fasteners of stainless steel A2. Body & Bonnet coated inside & outside with electrostatically applied epoxy powder coated blue colour (suitable for drinking water) as per DIN 30677-2 & GSK guidelines with a coating thickness of min. 250 microns. Valves should be full bore & tight shut-off. Flange drilling as per IS 1538 raised face & pressure testing at manufactures works shall be done as per IS 14846. includingtransportation charges excluding GST levied by GOI & GOM in all respect etc. complete. (For PN 10 & 16) i)50 mm dia

ii)80 mm dia

iii) 100 mm dia

iv)150 mm dia

v)200 mm dia

vi)250 mm dia

vii) 300 mm dia

viii) 350 mm dia

ix) 400 mm dia

x)450 mm dia

Providing and supplying at site ductile iron / Spheroidal Graphite (S.G.) iron single / Double chamber tamper proof air valve without isolating sluice valve. Valves in accordance with BSEN 1074-4 of PN 10/16 rated, with body and bonnet of ductile iron confirming to EN 1563/IS 1865 Gr. 500/7 or Gr.400/15 floats, float guide, seat ring of stainless steel 1.4436/1.4306, seat ring gasket of WRAS approved EPDM rubber (suitable for drinking water), internal fasteners of stainless steel A2. Body & Bonnet coated inside & outside with electrostatically applied epoxy powder coated blue colour (suitable for drinking water) as per DIN 30677-2 & GSK guidelines with a coating thickness of min. 250 microns. Flange connections as per IS 1538 raised face & pressure testing at manufactures works shall be done as per IS 14845. including transportation charges excluding GST levied by GOI & GOM in all respect etc. complete. (For PN 10 & 16) i)50 mm dia

ii)80 mm dia

iii) 100 mm dia

iv)150 mm dia

v)200 mm dia

Tushar Balasaheb Pawar

TUKARAM DIGAMBAR SUTAR