Construction of Compound wall and Dressing Room to at Gandhi Street Ward 70 Zone V in Tambaram City Municipal Corporation

Amount

Earth work excavation in all classes of soil except sand and rock such as hard stiff clay black cotton shales murrums hard red earth etc with all lead and lift and depositing on banks asper SS20 B etc complete Compound wall Column

Grade beam

Supply and filling of crusher stone dust on foundation and basement not exceed 15 cm thick on each layer including cost and conveyance and all labour charges for filling and consolidation charges etc complete

Plain cement concrete 1;4;8 mix using 40 mm HBG ISS metal including cost and conveyance of all materials and including all labour charges etc complete

Centering and shuttering chsrages for All PCC and RCC works using MS steel Moulds and soffits strutting with casurina props 10-13 cm dia including cost and conveyance of all materials and including all labour charges etc complete Column

Grade beam

Providing and laying in position Standardised Concrete Mix M-20 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 325Kg/ cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of Crushed Stone Sand (M- Sand), but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers -

Supply and fabrication of steel using TMT & RTS bars with including cost and conveyance of all materials and including all labour charges etc complete

Brick work in CM 1:5 (one cement & Five Crushed Stone Sand (M- Sand)) using II class ground moulded bricks of size 9" X 43/8"X 2 3/4" including finishing, curing, etc., complete complying with standard specification - 100CFT

Supply and fixing of MS grill using 12mm squre rods including cost and coveyance of all materials and including fabrication charges transportation charges and fixing in position etc complete

Plastering in C.M 1:5-12 mm thick with including cost and conveyance of all materials and including all labour charges etc complete

Painting two coats using Emulsion paint with including cost and conveyance of all materials and including all labour charges etc complete as per specification

Painting two coats using Ready mix enamel paint with including cost and conveyance of all materials and including all labour charges etc complete as per specification

Supply and Delivery Fabrication of MS doors and windows with outer frame and shutter frame in MS angle of size 40mm x 40mm x 6 mm with MS flat 25mm x 25mm x 6mm and MS sheet of 18 gauge including ventilating arrangements using 20mm square MS rods with locking arrangements including two coats of approved enamel paint over coat of red oxide including cost of angles, plates, sheets, fabrication charges, cost of hold fast and transportation charges etc., complete.

Paving the floor with design Antiskirt ceramic tiles (colour and shade as directed) of size 305 mm x 305mm x 6 mm in all floors over a base layer of cement mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 20mm thick laid in-situ and pointed with same coloured cement

Solid PVC Door Shutters using 19 Gauge 19mm MSsquare tubesfor styles and outer frames. 15mm MS square tubes for top, lock and bottom rails. The steel tubes shall be vered with 5mm thick solid PVC Sheets. Shutter using 5mm thick solid PVC Sheets for panelling shall rigidly fixed in position including necessary furniture and fittings. The over all size of styles shall be 50mm x 30mm. The over all size of top rail, lock rail and bottom rail shall be 75mm x 30mm.The over all size of frames shall be 50mm x 45mm with suitable rabate for housing the shutter

Supplying and fixing in position White / Colour Glazed Model Floor Mounted European Water Closet of best quality and approved make with 100mm “P” or “S” trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 liters capacity PVC / 12.5 liters capacity porcelain low level flushing tank with a pair of CI brackets, etc., complete with all fittings, such as, 15mm brass ball valve with polythene float with brass handle, union coupling connected by means of 40mm white PVC flush hand using Indian adopter joint including all internal fittings, such as, 15mm bras connections, 15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition, etc., complete complying with standard specifications. (The EWC and flushing tank with all accessories should be got approved by the Executive Engineer before use on works) Floor Fitting

Supply and delivery and fixing of HDPE tank as per IS 12701 / 1996 including loading, unloading, transportation and labour charges for fixing of the GI pipes and specials for pipe connection works including cutting, threading and fixing charges etc.,500 liters Tank

Internal Water Supply - P.V.C. Pipes (6Kg/SqCm) Supplying laying and jointing P.V.C pipes (6Kg/SqCm) of approved quality and best variety conforming to I.S.S & with I.S.I mark, of the following sizes including cutting , Fixing to PVC specials using Adhesive but excluding cost of such specials and fixing to wall with necessary teak - Wood Plugs,PVC Clamps and screws,making holes on the wall or drilling holes in roof and making good the dismantled portions to original condition with necessary brick work and plastering wherever necessary with necessary scaffolding charges. 32mm Pvc Pipe

32mm pvc Elbow

32mm pvc Coupling

110mm Pvc pipe

110mm Pvc Elbow

110mm Pvc tee

110mm Pvc Coupling

PVC Tap

Supply and fixing of Street light Pole GI steel Tubler Pole 7 Metre Length Single Bracket Pole with Base Plate (250 x 250 x 6mm) 76.10mm OD x 3.65mm Thick x 6000mm Length including cost fabrication and fixing on required place with necessary foundation works etc complete

Supply and fixing of 120W LED Street light fitting with LED on Out door fittings including cost and conveyance and fixing charges etc complete

Supply and fixing of Synthetic moulded compound box for street light with 16 a MCB and connecterincluding cost and conveyance and fixing charges etc complete Box-735+16 A MCB sp and Neutral -382

Supply and fixing of 4 sqmm PVc unsheathed copper cable including cost and conveyance and fixing charges etc complete

Supply and laying of 2 x 10 sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good Sd 196

Supply and laying of the 3.50x25 sqmm size of PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the three sides of the cable with bricks and refilling the earth to make good For Service connection as Per SD 200

Wiring with 2 x 1.5 sqmm (22/0.3) PVC insulated unshealhed SC.Cu. conductor of 1100V grade in suitable PVC rigid Pipe on wall and ceiling with PVC accessories with TW switch box with 5A F.T. switch inflush with wall, covered with hylum sheet of 3mm thick with painting of suitable colour for open PVC light/fan point (For Electronic regulator) (5 points per coil). SD 22

Supply and fixing of single box type 4feet 36W LED Tube Light Fitting complete with electronic ballast with TW round blocks on wall or ceiling with led tube with PVC unsheathed Copper leads from terminals to the fitting. SD 87

Supply and Fixing of Ceiling Fan including coat and conveyanceof all materials and labourcharges etccomplete

Supplyand Fixing of Circular ring including coat and conveyanceof all materials and labourcharges etccomplete

Supplyand Fixing of Pre cast Slab including coat and conveyanceof all materials and labourcharges etccomplete

LCR AND SONS (BID ID -1465340)