Electrification of NTPHC Rampora, Anantnag.

Amount

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable Make: Anchor/finolex/polycab or Equivalent

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Make: Anchor/finolex/polycab or Equivalent

supply and fixing of 5 inch dia Fan Box / concealed box with round sheet cover for covering the base and bottom and dual painted with red oxide Make:- Anchor/Indoasian/havells or equivalent

Providing Installation testing and commissioning of Ceiling Fans of approved brands with connections etc as required Make:- Anchor/Indoasian/havells or equivalent

Supply & Fixing of additional Fan rods Make:- Anchor/Indoasian/havells or equivalent

Supplying and fixing two module Stepped type electronic Fan Regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. Make:- LEGRAND(My link)/Anchor/Roma/Crabtree or Equivalent

Supply,installation,testing and commissioning of Ceiling LED Panel type 5 watt day milky fitting with connections as required Make:- Philips/Bajaj/CG or equivalent

Providing and fixing of Brass Batten Holder/ Angle holder including connections as required. Make:- Anchor/Indoasian/havells or equivalent

Providing and fixing of 9 watt LED Bulb Make:- Anchor/orient/havells or equivalent

Providing and fixing of BULK head outdoor light including connections as required. Make:- Anchor/Indoasian/havells or equivalent

Supply & Installation of Exhaust Fans in the existing opening including connections,testing commissioning etc as required Make:- Anchor/ luminous/havells or equivalent

Supply and fixing of Ceiling rose on the existing junction box/wooden box including connections as required Make:- Anchor/Indoasian/havells or equivalent

Supply and fixing Modular Blanking Plate on the existing modular plate and switch box excluding modular plateas required Make:- Anchor/Indoasian/havells or equivalent

Supplying & making outdoor end termination with cast resin compound including aluminium lugs and other jointing materials for 3.5 X 35 sqmm size of PVC Insulated & PVC Sheathed / XLPE aluminium conductor cable of 1.1 kv grade as required Make:- Gloister/ CCI/havells /CG or equiva

Supply ,instalation,fabrication and commissioning of Low voltage Sub Main Panel on 415 volts 3 phase 50 htzs of 2mm thick CRCA / Sheet of powder size 3X4 rft . b)100 amp 4 pole MCCB with breaking capacity c)100 amp 4 pole change over switch e)VSS meter/switch f) ASS meter/ switch g)CTs 200/5 amp rating Make:- HaGer/Siemens/Automatic electric /ABB or equivalent

Supply & Fixing of following size of medium class PVC Conduits along with accessories in surface / recess including cutting the wall and making good the same including in case of recessed conduits as required Make:- M/S Polycab/AKG/finolex or equiva

Supplying and fixing of following way horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) Make:-Hager/LEGRAND/SSK 0r equivalent

6 way (4 + 24), Double door

Supply & Fixing following size 4 pole SPN

SPN 63 amps Make:- Anchor/Indoasian/havells or equivalent

SPN 100 amps Make:- Anchor/Indoasian/havells or equivalent

Supplying and fixing of 5 amps to 32 amps rating 240/415 volts "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required of Approved Brand. Make:- Hager/LEGRAND/Schneider or equivalent

Wiring for circuit/ submain wiring along with earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. Make :- Anchor/finolex/polycab or Equivalent

2 x 2.5 Sqmm + 1 x 2.5 sqmm

2 x 4 Sqmm + 1 x 4 sqmm

4 x 10 Sqmm + 2 x 10 sqmm earth wire

Supply & fixing suitable size GI Boxwith modular plate and cover infront including providing and fixing 6pin 5/6 & 15/16 amps modular Socket outlet and 15/16 amps modular Switch, connections etc as required. Make:- LEGRAND(My link)/Anchor/Roma/Crabtree

Supplying and fixing following 3 pin 5/6 A modular switch /socket on the existing modular plate & swich box including connections etc. as reqd. Make:- LEGRAND(My link)/Anchor/Roma/Crabtree

Providing & fixing of 25mm X 5mm Copper strip on surface or in recess for connections etc as required Make:- Anchor/Indoasian/havells or equivalent

Disposal of unwanted debris

Earthing with copper earth plate 600mm X 600mm X 3mm thick including accessories and providing massonary enclosure with cover plate having locking arrangemets and watering pipe of 2.7 mtr long etc with Charcoal / coke salt as required Make:- Anchor/Indoasian/havells

M/S BHAT ENGINEERING

ABDUL RASHID MALIK

M/S NAZIR AHMAD KAR

M/S YASIR IMRAN CONTRACTOR

M/S REYAZ ELECTRICALS