CERTAIN REPAIR / MAINT TO OTM ACCN IN AREA A-3 OF AGE B/R-I UNDER GE (W) JRC

Amount

Taking down cement plaster on brick or concrete wall surfaces etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for 5 mm thick rendering in cement mortar 1:3 on concrete surfaces of roof projection ceiling etc including repairing of broken portion up to 6m height and surface finished even and smooth without using extra cement, complete all as specified and directed.

M&L for 15 mm thick rendering in cement mortar 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement as on wall complete all as specified and directed.

M&L 15mm thick rendering @ 3% WPC on wall in CM 1:4 on brick/concrete surface and finishing the surface even and smooth with out using extra cement.(Water proofing compound shall be mixed as per manufactured instruction and paid separatly as per respective items)

Supply only integral water proofing compound. Make : ACC/Water Seal/Doctor Fix etc.

M&L for preparation of new plastered or unplastered surfaces of ceiling and applying three coats of white wash, complete all as specified and directed.

M & L for preparation of newly plastered surface of walls and applying two coats of oil bound distemper(white or tinted) over a coat of chalk whiting primer and putty complete all as specified and as directed by Engr-in-Charge.

M&L for applying two coats of cement base paint over new plastered surfaces , including preparation and using primer new surfaces, complete all as specified and directed.

Demolition of stone or brick masonry built in cement mortar including all quoins, arches etc.but excluding ashlar facing, dressed stone work etc, complete all as specified and directed.

M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6, complete all as specified and directed.

All as per Srl item No. 10 here-in-before but except bricks.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

M&L 75mm thick PCC 1:3:6 type C2 (using 40mm graded stone aggr) as in plinth protection/path finishing the surface even and smooth without using extra cement complete all as spd and directed. Note : Plinth protection shall be laid in (1:20) slope. The concrete shall be laid at a stretch not exceeding 3metre in length. Joint gap between adjoining slab, at corners and at junctions of walls shall not exceed 10mm in width and shall be sealed with mastic filling i.e. one part of bitumen 85/ 25 grade mixed with 3 part of sand. Top surface of concrete shall be finished even and smooth without using extra cement. Joints shall be provided at not more than 3 metre interval at corner and as junction of walls.

Taking down chowkats or frames including shutters (without taking off shutters from the frame) not exc. 1.5 Sqm each, complete all as specified and directed.

Taking down chowkats or frames including shutters (without taking off shutters from the frame) exc. 1.5 Sqm but n exc 4.0 sqm each, complete all as specified and directed.

Taking down shutters of any description exc. 1 sqm and not exc. 2 Sqm each, complete all as specified and directed.

M&L for mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing, conforming to Fe-290(Gde E-165), complete all as specified and directed.

M&L for Pressed steel frames of size 125mmx60mm made of 1.25mm thick Cold Rolled sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate with PCC 1:3:6 type C0 (using 12.5mm graded stone aggregate) as in hold fast iron fixing and back filing of pressed steel door frame including necessary form work complete all as specified.

S&F 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed.

S&F 35mm thick factory made 2nd class hardwood (Sal/ Hollock) glazed and skelton shutters open rebated and prepare to receive glass guage (without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass/guage etc size of member etc size members of shutters as specified in SSR part I Section-8 clauses 8.24(b) supplied and fitted to chowkhat, complete all as specified and directed.

S&F Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplied and fitted in openings as per specification and drawing shown in SSR Part-II, complete all as specified.

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made of MS tube for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement from stiles and plained colour PVC sheet to be fitted with MS frame welded/sealed to the styles & rails with suitable PVC sheet beading, and jointing together with solvent cement, supplied & fitted in the frame at site as per specification & drawings shown in SSR Part-II, complete as specified.

S&F butt hinges, medium weight, cold rolled, mild steel 100 mm long (ISI marked), complete all as specified.

S&F butt hinges, stainlees steel 100mm long (ISI marked), complete all as specified and directed.

S&F mild steel barrel tower bolt 200mm, stove enamelled black with bright bolts(ISI marked), complete all as specified.

S&F mild steel pressed handles 150mm, oval type, stove enamelled black (ISI marked), complete all as specified.

S&F 250mm Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate(ISI marked), complete all as specified.

S&F extruded aluminium alloy handle, fabricated type, anodised, 150mm long (ISI marked), complete all as specified.

S&F aluminium anodised, barrel tower bolt of extruded section and fixed, 200mm long (ISI marked), complete all as specified.

S&F aluminium alloy, 16mm dia and 250mm long anodised, sliding door bolt with hasp, staple (bolt type) with and fixing clips of sheet, cast or excluded sections and fixing bolts and sliding bolts of excluded sections or cast aluminum alloy and fixed, complete all as specified.(ISI Marked)

S& F in repair 300mm mild steel ordinary rat tail rod pattern springs including roller and rollar plate, fixed including welding/ fixing to steel/ wooden chowkats, complete all as specified and directed.

S&F Aluminum floor door stopper 63 mm with two rubber legged all as specified and directed.

S&F in repairs peg set of six made of stainless steel all as direcred and specified.

Supply and fixing powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed.

S&F powder coated aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.) hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified complete all as specified.

S&F powder coated aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified.

Material and labour for 5.5mm thick sheet glass ordinary quality including solar control film 25 micron reflective type sticked on glass pane as per instructions of manufacturer and glazing fixed with oil putty in squares not exceeding 0.50 Sqm in each pane complete all as specified and directed.

S&F steel window 1.25mm thick box type (primer coated) ERW hollow P section of size 60x25mmsingle rebated comprises gauged skelton shutter ERW sec 50x20mm and 1mm thick with two open able leaf consisting two Nos sash bars of T section 20x3mm completed welded to frame with one vertical mullion of ERW box type T section of size 60x25mm and 1.25mm thick incl cutting holes and making good dismantled portion PCC 1:2:4 type B1 four Nos for each window incl following fittings weld to frame shutter (a) hold fast, 150mm long of 12mmx3mm made to shape-04 Nos per window (b) handle of Z section 20x25mm, 100mm long 01 Nos per leaf (c) MS Tower bolt 150mm long of 12x3mm made to shape-04 Nos per window (b) handle of Z section 20x25mm, 100 long stoper-01 No per leaf () MS pintal of hinges of size 75mmx12mm-02 Nos per leaf (g) fabrication & fixing arrangement as per Drg No. CEJZ/TD-06-07 , Note : wire mesh and painting shall be measured and paid separately under appropriate item.

All as per Ser item No 38 above but as in glazed windows. Note : wire mesh and painting shall be measured and paid separately under appropriate item.

S & F framed work such as grills, gratings, etc .with ends of bars shouldered and/ or riveted , or forget into spikes ; framed guard bars barallel iron doors and similar work conforming to Fe.290.Gde-E-165

S&F Stainless Steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tacks, wire staples or beading etc, complete all as specified and directed.

S&F Stainless Steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tacks, wire staples or beading etc, fixed in repairs, complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frame/steel frame or stone, concrete or brick surrounds, glazed with putty or fixed with beads, exc 1.5 sqm, complete all as specified and directed.

M&L for sheet glass 3mm thick ordinary quality and glazing with oil putty or wooden beads in squares not exc. 0.5 Sqm in each pane, complete all as specified and directed.

S & F door closer hydraulically regulated, design No 3 universal type suitable for door shutter of any width and of weight 61 to 80 Kg each cast iron body all as specified.

S&F in repair 25mm dia stainless steel drappery rod cut to size and fixed in position, including stainless steel hooks, and finials/side brackets (both side) complete all as specified and as directed.

M&L for preparation of new or previously untreated steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer, complete all as specified and directed.

M&L for preparation of new or previously untreated wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer, complete all as specified and directed.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed.

M&L for coloured glazed ceramic tiles of approved shade of size 450 x 300 mm x 7 to 8mm thick as in vertical surface etc set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 10mm thick rendering in cement mortar 1:4, complete all as specified and directed.

M & L Vitrified ceramic tiles 10mm thick (Square/rectangular ) polished, area of each tiles not exceeding 0.36 sqm, in floors, skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade including 15mm thick screed bed or bedding layer in Cement Mortar (1:6) as in floor finished even and rough to receive the top layer all as specified and directed.

M&L for anti skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.11 Sqm but n exc 0.18 Sqm, in flooring, skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 15mm thick screed bed in cement mortar 1:6, complete all as specified and directed.

Demolition of stone slabs/paver block and tiles of any description or thickness in floors, aprons etc., laid, bedded and pointed in any mortar, complete all as specified and directed.

M&L for machine cut polished kota stone slab flooring 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab, laid over and including 20mm thick screed bed in cement mortar 1:6, rubbing, grinding and polishing to achieve mirror finish, complete all as specified and directed. Note : Kota stone shall be laid in one piesce for treads and risers for step, window cills and moulding/rounding of edge properly.

M&L for polished kota stone slab 20-25 mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab, laid over and including 10mm thick rendering in cement mortar 1:4, rubbing, grinding, rounding of edges and polishing to achieve mirror finish, complete all as specified and directed. Note : Kota stone shall be laid in one piesce for treads and risers for step, window cills and moulding/rounding of edge properly.

M&L Granite 18-20 mm thick of any type work(table rubbed and polished) in steps, jambs,pillars windows cill cooking platform and like including pointing in white/colour cement and pigment to match with shade of granite including bull nosing of external,including demolition of stone slab and tiles of any description or thickness complete all as specified and as directed complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in postiion not other wise specifically provided for.

M&L for reinforcement cement concrete type B-0 1:2:4 (12.5 mm graded aggregate )slab supported on wall, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like including necessary formwork complete all as specified

M&L for MS TMT bars 10 mm and over dia and cut to lenth, bent to shape required incl cranking bending spirally for hooping for clos hooking ends and binding with and incl MS wire (annealed) not less than 0.9 mm dia.

S&F in repairs Vitreous Chinaware squatting pan, orissa pattern size 580mm x 440mm with integral foot rests, white, with cast iron ‘P’ or ‘S’ trap, front or back inlet, including provision of lime concrete, making connections to trap and to flush pipe etc. and making good to floors, complete all as specified and directed.

Supply and fix in repair Vitreous china wash down water closet pan (Pedestal pattern incl one toilet paper holder, one health faucet and jet ingrated controlled by two way angle valve) incl plastic water closet seat white colour closed pattern with flat bottom and cover and MS CP aluminium/PVC hinging devices complete all as directed and specified by Engr-in-charge.

S&F in repairs, PVC valveless, dual type, syphonic action type flushing cistern, 10 litres capacity, plunger type, low level, white with inlet, ball valve, float , 32 mm dia PVC long bend flush pipe 90cm long, complete all as specified and directed.

S&F in repairs stop valves/angle valves 15mm bore, fancy type, chromium plated, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, both ends screwed for iron pipe or for union etc., complete all as specified and directed.

S&F in repairs Stop valve,15 mm cast copper alloy chromium plated fancy type with long shank &cup(concealed type) with capstan heads, screwed down, high pressure, with crutch or butterfly handle screwed for 15mm bore iron fixed complete all as specified.

S&F in repairs PVC connection 15mm dia, 600mm long, hot water grade with brass chromium plated nuts and washers at both ends, complete all as specified. MAKE: Prayag/Polytuf/Pearl.

S&F in repairs Brass chromium plated shower rose of 125mm size with or without swivel joints with arms suitable for 15mm bore pipe, complete all as specified.

S&F in repairs, wash hand basin vitreous china flat back 550 x400 mm size white, first quality, with and including PVC waste coupling 32mm size, PVC waste pipe 32mm bore, brackets of Mild Steel angle iron (35mmx35mmx5mm) of suitable size including two coat of synthetic enamel paint over a coat of primer over angle iron brackets complete to walls all specified and as directed.

S & F in repairs counter wash hand basin vitreous china white oval shape size 440X525X195mm including PVC waste coupling 32mm size, PVC waste pipe 32mm bore complete making good the surface / joints with white cement complete all as specified and as directed. Make – Hindware / Parry ware / CERA

S&F in repair Vitreous China Urinals, half stall type ( back wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement, including PVC flush pipe, grating , waste coupling and union for discharge pipe, waste pipe, CP spreader etc all as specified and directed.

S&F in repairs bib tap, 15mm bore, fancy type, chromium plated, cast copper alloy with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule, complete all as specified and directed.

S&F Pillar tap ,brass with capston head , fancy type chromium plated , screwed down high pressure with or without lettered 'Hot' or cold with long screwed for 15mm bore iron pipe and fixed complete all as specified & directed.

S&F in repairs, 15mm bore, WHB mixer, fancy type, chromium plated, cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure, with or without lettered `Hot’ or 'Cold’ with long screwed shanks and fly-nuts, screwed for iron pipe, complete all as specified.

S&F in repair wall mixer fancy type cast copper alloy chromium plated high pressure with crutch or butterfly handle non telephonic complete all as specified Make-Jaquar

S&F in repairs towel rail brass chromium plated, 20mm dia, D type, 60cm long between flanges, complete all as specified and directed.

S&F sheet glass 5.5 mm thick WHB Shelf 600 mm long and 125 mm wide as per sample approved by Engr -in-charge complete all as specifed and directed.

S&F sheet glass corner set of 5.5 mm thick glass of 3 pieces as per sample approved by Engr -in-charge all as specifed and directed.

S&F in repairs soap dish, brass chromium plated, complete all as specified and directed.

S&F in repairs PVC (SWR) pipes, 110mm dia, single socketed, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified & directed. Make: Finolex/Reliance/Supreme

S&F in repairs 110mm bore PVC (SWR) bends any radius, complete all as specified and directed.

S&F in repairs 110mm bore PVC (SWR) bends with access door of any radius, complete all as specified and directed.

S&F in repairs 110 mm bore PVC (SWR) junction single (Single T ) with access door equal or unequal, complete all as specified.

S&F in repairs 110 mm bore PVC (SWR) junction double (double T ) equal or unequal, complete all as specified.

S&F in repairs 110 mm bore PVC (SWR) vent cowl, complete all as specified.

S&F in repairs brass chromium plated grating 125mm dia with or with out hole wate, complete all as specified and directed.

M&L for cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps & similar work etc. and cutting chases for cancelled water tubing and making good, cutting exc 10cm but not exc. 20cm girth in brick walls, complete all as specified.

Taking up or down GI tubing with all connections and fittings of 15mm bore including cleaning for refixing or removal to store, complete all as specified and as directed by Engineer-in-Charge.

Taking up or down GI tubing with all connections and fittings of 20mm bore including cleaning for refixing or removal to store, complete all as specified and as directed by Engineer-in-Charge.

S&F galvanized iron water tubing, ‘medium grade’ 15mm bore, with all fittings such as bend, tee, union etc., fixed complete to walls and ceilings or laid in floors, complete all as specified & directed.

S&F galvanized iron water tubing, ‘medium grade’ 20mm bore, with all fittings such as bend, tee, union etc., fixed complete to walls and ceilings or laid in floors, complete all as specified & directed.

Refixing old steel tubing of 15mm bore and connections in new or old position (Walls, ceiling, floors etc.), complete all as specified and directed.

Refixing old steel tubing of 20mm bore and connections in new or old position (Walls, ceiling, floors etc.), complete all as specified and directed.

S & F in repair 20mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (min wt 210 gm) complete all as specified. Make:- Prayag/Polytuf

S&F in repairs rotationally moulded polyethylene white colour triple layer water storage tank (cylindrical vertical with closed top) hoisted & fixed in position of capacity 500 liters including ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed for 20mm bore pipe, complete all as specified and as directed.

S&F in reairs Rotational moulded plythelene white water storage tank tripple layered white coloured, 1000 litres capacity (cylinderical vertical with cxlosed top) hoisted with thread tank cover and fixed in position including GI tank nipple & with union(two nos each), including 20mm for ball valve brass high pressure, with polythene float and fly nut complete all as specified and directed.

S&F in repairs Gun-metal, globe or gate valves of 20mm dia, with iron wheel head, screwed both ends for iron pipe, complete all as specified.

Dismantling of wall and ceiling or insulation boards/ slabs / PVC panelling any thickness and in any position incl frame grid and cover fillets and framework etc complete all as specified and directed.

S&F Anodised aluminium snap grid frame work for false ceiling all as specified and directed.

M&L4mm th Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws complete all as specified and directed.

Providing & fixing false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595 x 595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Noncombustible as per BS 4 76 (part 4 )-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main-T runners of size 15 x 32 mm of length 3000mm,cross-T of size 15x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of size 600x 600mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000 mm length and Lshape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall I partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge.

Demolition of cement concrete (unreinforced) in concrete of any description and in any position not otherwise specifically provided for all as specified and directed.

M&L for PCC(1:2:4) type B2 (40mm graded stone aggregate) filling in post holes, surface channels, drains and other similar work complete all as specified.

Dismantling mild steel work of any description not otherwise provided for complete all as specified and directed by Engr-in-Charge.

S&F mild steel for framed structure like trrussed, purlins, crane gantries,post rails and fastenings and heavy bracket framming (Beam,Tee, Angle, Channels, tubes,flate sections) including distance pieces, cleats etc conforming to Fe410-W (Gde-E-250) quality-A

Dismantling Asbestos Cement (Corrugated, Semi corrugated etc.) sheets in roof coverings complete all as specified and directed by Engr-in-Charge.

M&L pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa with powder coating 150 gm/sqm as in roof covering/ cladding to wall , fixed with self tapping screws/ J or L type hook bolts complete as directed by Engr-in-charge.

M&L for PCC type B-0 1:2:4 using 12.5mm graded crushed stone aggregate as in roof kerbs, back of chowkhats or mud stops, rounded or chamfered on edges, complete all as specified & directed.

M&L for repairing of RCC projections, chajjas , roofs, facia etc. by necessary preparation i.e. scrapping, cutting, chiseling, derusting and cleaning exposed reinforcement, sufaces of damaged, loose RCC surfaces and applying one coat of cement slurry and filling the surfaces with cement concrete (1:1.5:3) using 12.5mm graded crushed stone aggregate and reinforced with welded mesh of weight exc 2kg per sq mtr but n.exc 3kg/sqm with or without facia and finished with cement sand mortar (1:3) using coarse sand in patches are n.exc 70mm including applying two coats of finishes to match with the existing surfaces in at any height complete all as specified. Note:- Cost of formwork and welded mesh shall be deemed to be included in unit rate quoted by the contractor.

G S TRADERS (BID ID -3358108)

AXIS SALES (BID ID -3365156)

SARASWATI CONSTRUCTION CO (BID ID -3366073)

M/S Mittal Builders (BID ID -3366152)