8963/GWL/E8 SPECIAL REPAIR TO BLDG NO T-21, BLDG NO T-3A IN THE AREA OF AGE B/R-I AND PROVN OF 3 X 2 TON SPLIT AC FOR COMPUTER INSTALLATION OF UIFOS UNDER GE GWALIOR

Amount

Dismantling of AC (corrugated/semi-corrugated) sheets in roof covering including any type of ridges complete all as specified and directed.

M & L Pre -painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of approved colour haviing tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M & L Pre -painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of approved colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as in ridge complete all as specified and directed.

S & F Anodised aluminium snap grid frame work for false ceiling consists of powder coated aluminium angle 22x22x1.3 mm and Tee 35x25x1.3 mm of grid size 600x600 mm complete all as specified and directed.

M & L Non asbestos fibre cement building boards 6 mm thick fixed or laid/inserted to Aluminium anodised frame and hinges framework fixed with Hangers 3-4 mm dia G.I. (upto reqd length) adjusting level, fixed to roof slabs by means of ceilling cleats etc complete all as specifed and directed.

Demolition of cement concrete (unreinforced) in ground floor and paving not exceeding 15 cm thickness (below or above ground level) including the disposal upto 50m distance complete all as specified and directed.

M & L Plain cement concrete 1:2:4 type B-0, using 12.5mm graded stone aggregate as in 25 mm thick leveling course complete all as specified and directed.

M & L Non-skid Ceramic coloured tiles 7 to 8 mm thick (square/rectangular), area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match over & including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

M & L Non - skid ceramic coloured tile 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, on vertical surface such as skirting, dados and risers to steps etc set and jointed in neat cement slurry and pointed in coloured cement to match, over and including backing coat 10 mm thick cement mortar 1:4 on fair faces brick work or concrete surface complete all as specified and directed.

M & L Non - skid ceramic coloured tile 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match, laid over and including screed bed 15mm thick in cement mortar 1:6 complete all as specified and directed.

Dismantling floor, hearth or wall tiling of any description and in any position including cement mortar bedding (but not backing) complete all as specified and directed.

M & L Glazed ceramic coloured tiles in vertical surface 350 x 250 x 7 mm/ 450 x 300 x 7 mm thick set and jointed in neat cement slurry and pointed in coloured cement to match, over and including backing coat 10 mm thick in cement mortar 1:4 on fair faces brick work or concrete surface complete all as specified and directed.

Dismantling of stone slab and tiles of any description or thickness in floor, aprons etc laid dry and pointed in any mortar complete all as specified and directed.

M & L for screed bed or bedding layer of 20 mm thick cement mortar 1:6 for laying floor finishes complete all as specified and directed.

M & L for machine cut kota stone flooring 18 to 20mm thick laid over cement screed base and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing etc complete all as specified and directed.

M & L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6, finished even and smooth without using extra cement, complete all as specified and directed.

M & L for machine cut Kota stone slab 18-20 mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed complete all as specified and directed.

Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.

Demolition of Brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M & L for Brickwork with sub class 'B' bricks, old size, straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:6 complete all as specified and directed.

M & L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6, finished even and smooth without using extra cement, complete all as specified and directed.

M & L for rendering 5 mm thick on faces or brick work, concrete surfaces, in ceiling & sunkan floor etc, finished even and smooth without using extra cement, complete all as specified and directed.

M & L for rendering 15 mm thick on other than fair faces of brick work or concrete surfaces in cement mortar 1:4, mixed with water proofing compound, finished even and smooth without using extra lime or cement complete all as specified and directed. Note:- Water proofing compound shall be measured & paid seperately.

M & L for preparation of new plastered ceiling surface and applying three coats of white wash complete all as specified and directed.

M & L Preparation of new plastered wall surface and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and directed.

M & L for preparation of new plasterd wall surface and applying two coats of distemper oil emulsion over a coat of self primer and including a layer of 3mm thick wall care putty finished to smooth surface complete all as specified and directed.

M & L for complete removal of existing treatment from external walls surfaces (any No of layers) by scrapping down with steel scrappers or any other means, preapration of surface and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and directed.

M & L for preparing of old treated wall surfaces by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efforecent salt and trading oil and greasy spots plastered or un-plastered surfaces of wall including cornices, pilasters etc and applying two coats of oil emulsion distemper complete all as specified and directed.

M & L for preparation of old treated wall surface and applying one coat of white wash (lime) on walls including cornices plastered or un-plastered surfaces complete all as specified and directed.

Taking down steel tubing and connection 15mm dia bore and removing from site complete all as specified and directed.

All as per item No 30 herein before but 20 mm dia pipe complete all as specified and directed.

M & L for Galvanised iron tubing 15mm dia, medium grade, with all fittings fixed to wall and floor complete all as specified and directed.

All as per item No 32 herein before but 20 mm dia pipe complete all as specified and directed.

S & F in renew PVC (SWR) floor trap, 75mm dia outlet, plain with grating including jointing with solvent cement and fixed complete all as specified and directed.

S & F in renew Bib tap 15mm bore, fancy type, chromium plated cast copper alloy with capaston head handle, screwed down screwed iron pipe or brass ferule fixed, complete all as specified and directed.

S & F Angle stop valve 15mm, chromium plated cast copper alloy, screwed for iron pipe or for union fixed complete all as specified and directed.

S & F in renew PVC connection 15mm size with PTMT nuts on both ends of length 450 mm complete all as specified and directed.

S & F in renew swivel shower of brass chromium plated of size 125mm for fixing with 15mm bore pipe complete all as specified and directed.

S & F in renew tabular towel rail, brass 20 mm dia D type 60 cm long between flanges, complete all as specified and directed.

S&F in renew for Soap dish of brass Chromium plated fixed with pvc rawal plugs and screw, complete all as specified and directed.

S & F in renew Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

S & F for Stainless Steel Peg Set of 6 hooks, ISI marked, medium weight complete all as specified and directed.

S & F in renew PTMT grating 100/125 mm dia fixed over Nahani trap complete all as specified and directed.

S & F in renew wash hand basin vitreous china, flat back of size 550 x 400 mm excluding taps, waste, chain and plug and porcelain stopper but including brackets cutting for and pinning in ends complete all as specified and directed.

S & F in renew waste fittings 32 mm, brass chromium plated for glazed ware sinks, basins, etc with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.

S & F in renew Brass chromium plated mixer for basin, mixing hot and cold water, screwed down for iron pipe and fixed complete all as specified and directed.

S & F in renew fancy type wall mixer with telephonic shower (3-in-1 system) for cold & hot water 15 mm bore, cast copper alloy chromium plated complete all as specified and directed.

S & F in renew vitreous china squatting pan "(Orrissa" pattern) size 580 x 440mm white with integral foot rests (excluding flushing cistern and flush pipe) including provision of lime concrete bedding complete all as specified and directed.

S & F in renew PVC flushing cistern 10 Ltrs capacity including all fitting flush pipe etc complete all as specified and directed.

Dismantling of water tank exceeding 250 Ltrs but not exceeding 500 Ltrs complete all as specified and directed.

S & F for rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of capacity 500 litres double layered, hoisted and fixed in position all as specified in SSR Part-I, complete all as specified and directed.

S & F Ball valves, brass, high pressure with polythene float and flynut complete screwed for iron pipe of 20mm bore of brass ferrule complete all as specified and directed

S & F stop valves 20mm, cast copper alloy screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for union fixed complete all as specified and directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc, including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories), complete all as specified and directed.

S & F PVC (SWR) pipes 110 mm, single socketed in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and directed.

S & F PVC (SWR) pipes 75 mmsingle socketed in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and directed.

S & F PVC (SWR) bends any radius 110mm bore, complete all as specified and directed.

S & F PVC (SWR) bends any radius 75mm bore, complete all as specified and directed.

S & F PVC (SWR) junction single (single T), equal or unequal 110mm bore, complete all as specified and directed.

S & F PVC (SWR) junction single (single T), equal or unequal 75mm bore, complete all as specified and directed.

S & F for 110mm dia PVC(SWR) vent cowl complete all as specified and directed.

M & L for PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed.

Taking down chowkhat frame with shutter (without taking out shutter from the frame) n.exc 1.50 Sqm each complete all as specified and directed.

Taking down chowkhat frame with shutter (without taking out shutter from the frame) exc 1.50 Sqm but n.exc 4 sqm each complete all as specified and directed.

M & L for pressed steel frame of size 125 x 60 mm for door with one or more rebates making necessary fixing lugs, hinges, lock strike plate, etc, complete all as specified and directed.

S & F for pressed steel frame of size 105 x 60 mm for door with one or more rebates makaing necessary fixing lugs,hinges, lock strike plate, etc, complete all as specified and directed.

S & F for solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S square tube, fixing in opening as per specification complete all as specified and directed.

S & F factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face, with particle board core, fixing in frame at site as per specification complete all as specified and directed.

S & F for Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed. Note: stainless steel butt hinges and necessary S S screws shall be paid separately

S & F Second class hardwood skeleton shutters 35 mm thick, open rebated and prepare to reveive glass, guage etc (without sash bars ) edges of framing plain chamfered or rounded, fitted with for securing glass etc, size of members of shutters as specified in SSR Pt-I, section 8, clause 8.24(a) complete all as specified and directed.

M & L for Anodised powder coated aluminium frame for windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed.

S & F andoised powder coated aluminium windows, ventilators shutters, sliding type, aluminium section weighing not less than 0.55 Kg/m including necessary jointing cleats, Glazing clips, rubber neoprene packing, andoised aluminium snap beading screws, locking latches etc complete all as specified and directed.

S & F Mild steel framed work as in grill or framed guard bars with end of bars welded or riveted into spikes conforming to Fe- 290 Gde E-165 complete all as specified and directed.

S & F for Sheet glass 4mm thick ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane complete all as specified and directed.

S & F for galvanised mild steel wire cloth 0.46 nominal dia of wires and average width of aprature 1.18mm and fixed with tinned tacks galvanised wire staples fixed including a coat of french blue paints complete all as specified and directed.

S & F for 150 mm aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S & F for extruded aluminium alloy handles 150 mm, fabricated type, anodised complete all as specified and directed.

S & F for Mild steel butt hinges 100 mm, medium weight, cold rolled mild steel, and fixed complete all as specified and directed.

S & F aluminum alloy anodized sliding door bolt 300mm long with hasp and staple (bolt type) and fixing clip of sheet and cast in extruded section and fixing bolts and sliding bolt of extruded section complete all as specified and directed.

Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed.

S & F for Prelaminated particle board 18/19mm thick, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed.

S & F for continuous (piano) hinges, mild steel, bright finished or electrogalvanised, width of flap 30mm complete all as specified and directed.

S&F in renew block boards 19/20mm thick, grade 2 quality, interior grade, commercial type, fixed with screws to timber frame-work, complete all as specified and directed.

S & F for magnate catcher of metal body and striking plate heavy duty including fixed with screw, complete all as specified and directed.

S & F Cupboard locks, Brass, 2 Levers grade 1, Size 50mm complete all as specified and directed.

S&F figured glass, pin head type 4mm thick and glazing with oil putty in square not exceeding 0.5 Sqm in each pane complete all as specified and directed.

M&L for preparation of new wood or wood based surface of any description exceeding 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparation of new steel surface of any description exceeding 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for cutting out cracks to V section in existing walls, roofing or terrace, cleaning out wetting grouting with cement and sand slurry 1:3 complete all as specified and directed.

S&F in renew fancy type vista pattern curtain roads aluminium 20 mm dia with required colour powder coated of approved shade including bracket/juctions /wall to wall and with rings of best quality complete all as specified and directed.

M&L for providing cement concrete 1:3:6 type C1 using 20 mm graded stone aggregate as filling inside pressed steel frame including necessary form work complete all as specified and directed.

Supply only integral liquid water proofing compound (ISI marked) complete all as specified and directed.

M & L for PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in 75 mm thick plinth protection/path and the like including finishing even & fair complete all as specified and directed.

M & L for cement concrete 1:4:8 type D-2 using 40 mm graded stone aggregate, as in 100 mm thick sub base to floor, finished even and rough complete all as specified and directed.

M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

M & L for rubber moulded machine pressed precast concrete interlocking paver block 60 mm thickness, M-35 grade, any shape and size, confirming to IS 15658-2006 in grey cement glossy finish laid dry over sand cushioning complete all as specified and directed.

M & L, hard core of for broken stone boulder of gauge not exceeding 63mm, deposited, spread and levelled in layers not exceeding 15 cm thick watered and rammed to a true surfaces complete all as specified and directed.

M & L Granite (of any type) tiles 18 mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete, laid over and including 15mm thick screed in cement mortar 1:4 complete all as specified and directed.

M & L for Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed.

S & F for factory made shutter, Plain framed, panelled shutter 35 mm thick (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed.

S & F for box type steel window with side hung shutters (double shutters for glass and gauze) jointed together with and including grill using 10 mm square bars @ 10 cm C/C as per TD No CEBZ/TD/14/2011 including box type hinges with steel handle and steel peg stay complete with glazing bars devetailed and welded complete all as specified and as directed Note : Glass/gauge shall be measured and paid separately

M&L for applying one coat of synthetic enamel paint on old steel & iron surfaces (previously decorated) for grills, guard bars of any description not otherwise described over 10cm in width or girth including preparation of old surfaces complete all as specified and as directed.

M&L for preparing old painted wood and wood based surfaces exceeding 10cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

S&F for stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed.

Taking down carefully existing aluminum / copper point wiring (light, fan, socket or power point) complete of any description including fitting such as switches, ceiling roses, pendants, tube light fitting, ceiling fan with regulators, sockets, wooden boards, laminated sheets from sunken boxes, boards, shades light fitting etc and making good the disturbed surfaces of walls, floors, ceiling etc to match with existing surfaces complete all as specified and directed.

Taking down ceiling/Exhaust fan of any sweep, removing blades, cleaning the fan completely of dust and dirt and Re-hanging the same back to its original positions including connecting with three core flexible copper wire to ceiling rose etc after the completion of the point wiring including replacement of old unserviceable fan hook rubber pad, nut bolts and washers etc, complete all as specified and as directed.

Taking down submain wiring of any size any type and in any position metalic/non metallic PVC conduit of wooden batten complete all as specified and directed.

Taking down unserviceable Sheet metal box & MCB DB SPN with MCB's of any make/capacity complete all as specified and directed.

Taking down unserviceable TPN DB with MCB's of any make/capacity complete all as specified and directed.

M & L concealed point wiring with PVC insulated and unsheathed electric cable 1100 volts grade single core FRLSH confirming to IS 694:2010 having multi stranded copper conductor of 1.5 Sqmm nominal cross sectional area (ISI marked with valid CML No) drawn in and including concealed non metallic rigid PVC conduit medium grade (ISI marked with valid CML No) not less than 20 mm dia with all fitting and fixing accessories and 1.5 Sqmm FRLSH confirming to PVC insulated unsheathed multistranded copper conductor cable as continuous earth conductor, connected to common earth dolly by providing suitable lugs with & including pressed steel sunken terminal boxes factory made for mounting switch, regulators etc with and including 2.8 mm thick plastic laminated sheet cover (white) ISI marked, fixed with brass screws and cup washers duly painted with two coats of anti corrosive paint/black bituminous paint outside and two coats of aluminium paint inside for mounting switches. sockets etc complete all as specified and directed for following :-

One light point controlled by one switch.

One Ceiling fan point controlled by one switch.

One Exhaust fan point controlled by one switch.

One 5 pin multipurpose socket out let 5/6 Amps on the same board with other switch.

One 3 pin/5 pin switch socket outlet, 5 Amps on independent board.

All as per item No 112 here in before but point wiring with 2.5 sqmm FRLSH cable for one six pin socket outlet 15 Amps controlled by one switch on independent board.

S&F switch piano, flush button single pole one way 5 Amp complete all as specified and directed.

S&F socket out let, multipurpose, 2 in 1, 5 pin, 5 Amp complete all as specified and directed.

S&F switch piano, flush button single pole one way 15 Amp complete all as specified and directed.

S&F socket outlet multipurpose flush type, 2 in 1, 6 Pin 5/15 amps complete all as specified and directed.

S&F ceiling rose surface bakelite 63.5 mm dia three terminal complete all as specified and directed.

S&F electronic step rotary type fan regulator of two module, capacity 80 to 100 Watt, 240 volts, AC 50Hz complete all as specified and directed.

S&F Lamp holder with metal ring, PVC/Polycarbonate type with back plate suitable for batten fittings ISI Marked complete all as specified and directed.

S&F LED Lamp 09/10, efficiency > 100 lumen/watt complete with 5 star rating complete all as specified and directed.

M&L, sub main wiring with two single core PVC insulated unsheathed FRLSH confirming to IS 694:2010, multi stranded copper conductor (ISI marked with valid CML No), cable 1100 Volt grade, 4 sqmm size drawn in and including non metallic rigid PVC concealed conduit medium grade (ISI marked with valid CML No) not less than 25 mm dia with all fitting & fixing accessories including one run single core PVC insulated unsheathed 4 Sqmm FRLSH copper conductor (ISI marked with valid CML No) colour code as a earth continuity and connected upto DB complete all as specified and directed. NOTE: (i) Two runs of single core PVC cable with one run of earth conductor and one run of conduit shall be measured as one unit. (ii) Quoted rates shall be deemed to be inclusive for cutting chases in wall/pillars/columns etc. of any description for concealing the conduits to required depth & making good the disturbed surface in cement mortar 1:4 including finishing the surface with putty/distemper to match with the existing surface.

M & L sub main wiring with two single core PVC insulated unsheathed FRLSH confirming to IS 694:2010, multi stranded copper conductor (ISI marked with valid CML No), cable 1100 Volt grade, 2.5 sqmm size drawn in and including non metallic rigid PVC concealed conduit medium grade (ISI marked with valid CML No) not less than 20 mm dia with all fitting & fixing accessories including one run single core PVC insulated unsheathed 2.5 Sqmm FRLSH copper conductor (ISI marked with valid CML No) colour code as a earth continuity and connected upto DB complete all as specified and directed. NOTE: (i) Two runs of single core PVC cable with one run of earth conductor and one run of conduit shall be measured as one unit. (ii) Quoted rates shall be deemed to be inclusive for cutting chases in wall/pillars/columns etc. of any description for concealing the conduits to required depth & making good the disturbed surface in cement mortar 1:4 including finishing the surface with putty/distemper to match with the existing surface.

S&F Decorative ultra slim LED Tubelight fitting of LED with extruded polycarbonate, enviormental friendly energy efficient ready to use, 20 watt, 6500K fitting, Efficiency >100 lumen /watt including reqd length of not less than 1.0 Sqmm PVC multistranded BIS marked 03/02 core copper conductor for electrical connection from ceiling rose to connector of LED fitting including testing on completion all as specified and directed.

S & F security light fittings LED of 30 watt with photometric sensor, pressure die cast aluminium housing, better optics for uniform distribution IP 65 protection, Heat resistance glass, including bracket 25mm dia galvanised iron pipe light grade bent to shape over all length 0.60mtr fixed to wall with 02 Nos FI clamps made of 40 x 5 mm, 15 cm long, 8 mm dia bolts and nuts with washers grouted in wall complete including reqd length of 1.5 Sqmm PVC multistranded BIS marked, 03 core copper conductor for connection from ceiling rose to light fittings including testing on completion complete all as specified and directed.

S & F Photometric sensor outdoor type 220-240 volt ambient light <5-15 lux working temparature-20~+40C working humidity <93% RH along with PVC connection of 6 to 10 amp capacity complete all as specified and directed.

S & F sheet metal enclosure, double door for distribution board factory made for MCB DB load link VTPN 4 way suitable for MCCB as incomer, 100 Amp, 4 pole & including MCCB 100 amps 4 pole 16 KA complete.(when MCB's are to be used) with suitable size of busbar complete, fixed flush in wall including chases wall for fixing DB and making good the distributed wall surfaces to match with existing surface including taking down old enclosure complete all as specified and directed.

S&F MCB DB, sheet metal enclosures double door SPN 12 way with bus bar 240 volts 2 in 1 shutter type (METAL DOOR) type, IP 43 degree protection with blank plates where required and complete all as specified and directed.

S & F MCB DB, sheet metal enclosures double door SPN 8 way with 200 Amps rated bus bar 240 volts 2 in 1 shutter type (METAL DOOR) type, IP 43 degree protection with blanking plates where required complete all as specified and directed.

S&F MCB SPN 63 Amps, 240 volts 'C' series 16 KA, including connection with suitable size copper lugs complete all as specified and directed.

S&F MCB SP 240 volts, 6 to 32 Amps, 'C' series 10 KA including connection with suitable size copper lugs complete all as specified and directed.

S & F Single pole and neutral enclosure with a two pin and earth plug and socket with one single pole MCB 20 Amp complete all as specified and directed.

Supplying, laying, testing and commissioning of XLPE insulated screened PVC bedded galvanised steel strip or wire armoured electric power cable (Heavy duty) with aluminium conductor 1100 volts grade, cross sectional area size 25 Sqmm 3.5 Core complete all as specified and directed.

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed.

Returning, filling of excavated soil, including spreading leveling, watering and well ramming in layers, not exceeding 25cm complete all as specified and directed.

Removing of surplus soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.

Supplying and laying un reinforced precast concrete cable cover Class LV, Type I, flat size 250mm x 150mm x 40mm complete all as specified and directed.

Supply and fix cable jointing kit for 1.1 KV grade cable for end joint complete with Jointing material heat Shrink type and accessories suitable for 3 ½ / 4 core XLPE, armoured, Aluminium conductor cable of size 25 to 50 sqmm, Indoor/Outdoor type complete all as specified and directed.

S & F Galvanised iron tubing, Light grade 50 mm dia with all fitting laid in trenches, fixed to wall and floor of for cable protection complete all as specified and directed.

Taking out old unserviceable pipe line 25 mm dia alongwith fittings from existing connections complete all as specified and directed.

All as item No. 140.00 herein before but 20 mm dia complete all as specified and directed.

M & L for Galvanised Iron pipe 25mm dia, Medium grade alongwith all fittings and fixtures complete laid in trenches complete all as specified and directed.

All as item No.142.00 herein before but of size 20 mm dia complete all as specified and directed.

S & F cast iron/Brass Gate Valve 25 mmm size confirming to IS 14846/2000, ISI Mark MS Spindle and iron wheel head with both ends flanged with new rubber gasket, bolts and nuts including dismantling of old unserviceable Gate valve complete all as specified and directed.

All as per item No 144.00 herein before but of size 20 mm complete all as specified and directed.

M&L, sub main wiring with two single core PVC insulated unsheathed FRLSH confirming to IS 694:2010, multi stranded copper conductor (ISI marked with valid CML No), cable 1100 Volt grade, 6 sqmm size drawn in and including non metallic rigid PVC concealed conduit not less than 25 mm dia with all fitting & fixing accessories including one run single core PVC insulated unsheathed 6 Sqmm FRLSH, copper conductor (ISI marked with valid CML No) colour code as a earth continuity and connected upto DB complete all as specified and directed. NOTE: (i) Two runs of single core PVC cable with one run of earth conductor and one run of conduit shall be measured as one unit. (ii) Quoted rates shall be deemed to be inclusive for cutting chases in wall/pillars/columns etc of any description for concealing the conduits to required depth & making good the disturbed surface in cement mortar 1:4 including finishing the surface with putty/distemper to match with the existing surface.

Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc complete all as specified and directed.

Supply and fix exhaust fan, steel body AC single Phase 230Volts of size 450mm sweep with blades and frame and louvers complete all as specified and directed.

Supplying, laying, testing and commissioning of XLPE insulated screened PVC bedded galvanised steel strip or wire armured electric power cable (Heavy duty) with aluminium conductor 1100 volts grade, cross sectional area size 35 Sqmm 3.5 Core complete all as specified and directed.

Supply and laying old size sub class `B' bricks, laid in trenches with width wise along the alignment of the cable as protection complete all as specified and directed.

M & L for Earthing with galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm thick burried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) vertically, with top edge of plate not less than 1.5 metre below normal ground level connected to galvanised earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 of MES Schedule Part-I connecting to earthing test. Testing on completion with and including necessary excavation and earth work in any type soil, earth lead connected to earth test point & to main switch board etc with & including adequate quantity of charcoal dust and common salt, test point, PCC (1:3:6) type C-1 (using 20mm graded BT stone aggregate) for earth pit with 40 x 40 x 6mm mild steel angle iron frame for cover, internal surface of concrete shall be given 10mm thick plaster in CM 1:4, pre cast RCC (1:2:4) type B-1 using 40mm graded stone aggregate thick cover, reinforced with 8mm dia deformed or TMT bars 3 Nos both way with 12 mm dia round bar handle, GI medium grade watering pipe 20 mm dia with funnel and wire mesh and 15mm dia GI medium grade earth lead protection pipe including provn of earth test point made of 50 x 5 mm MS Flat in 'D' shape 500 mm legth grouted in wall complete 1 x 6 mm multistrand PVC insulated copper conductor (Green Colour) to be provided from test point to DB through 20 mm dia concealed non metallic conduit complete all as specified and directed.

Supply and fix air cooled inverter type 5 Star split unit air conditioner of Hi Wall mounted, remote controlled 2 Ton split AC with 100% copper coiled anti corrosive film protected, rotary type, R-32/R-22/R-410A refrigerant based compressor/condenser unit. The Indoor Unit having LED/LCD Panel display, Auto/cool/Fan/Dry mode capable of performing, remote control with LCD/LED Display, suitable to work on 230V, 50 Hz AC supply etc complete as per Technical specification sheet complete all as specified and directed.

Supply & installation, commissioning of voltage stabilizer for automatic operation single phase naturally air cooled indoor type & designed for input variation between 170 volts to 250 volts 50 Hz with output voltage stablized at 230 volts with accuracy of +2.5% and of capacity 4 KVA complete all as specified and directed.

S & F for MCB SPN 240 volts, 40 Amps, 'C' series 10 KA including connection with suitable size copper lugs complete all as specified and directed.

S & F for XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 16 sqmm x 4 Core complete all as specified and directed.

S & F tube 'Light' grade galvanised with all fitting laid in trenches, fixed to wall and floor of 40 mm dia for cable protection complete all as specified and directed.

M & L Cable joining kit for LT cable for outdoor termination in repair heat shrink type joint complete with joining material and accessories suitable for 4/3.5 core XLPE armoured aluminium conductor cable of size 16 sqmm to 25 sqmm complete all as specified and directed.

M & L for cross arms, bracing, supports, clamps and back plated fabricated from structural steel sections including nuts, bolts, washers, welding bending cold or hot drilling holes for bolts in any shape or size as directed inclusive of 2 coats of aluminium paint over a coat of red oxide primer after dismantling old unserviceable cross arms complete all as specified and as directed.

M/s Tirupati construction

M/s Subhash Construction Co.

M/S NIRMAL SINGH DHANJAL

RAJ AND BROTHERS

MAHARAJ KUNWAR SAHAB CONSTRUCTION

M/S MAHAVIR SINGH

mahamaya constructions

BEHL CONSTRUCTION CO

Babatia super works