Major Renovation and Modification works of T.F.Pandunath (Assam-736) of Commercial cruise service against Lachit ghat.

Amount

Dry docking of vessel/boat carefully and placing over roller/blocks for major repairing works without causing any damage to the boat as per direction.

Up to 10 ton

Additional 40 Ton

Supplying/Providing of wooden blocks up to the sizes (75x45x30) cm under lifted vessel/boat etc. including necessary wooden packing per direction complete.(Non-Sal)

Cutting /removing old damaged plate, angle, etc. by using gas including the cost of labour as directed. 5 mm plate

Supplying of I.S. Grade 2026 Mild Steel Plate of required size and specified thickness in keel , bottom hull, side hull, transom, side keelson etc. for the hull erecting in position by cutting welding straighten etc. in proper shape and size and welding the same including all cost of labour, material etc. complete as directed. (5mm & above)

Providing M S Plate cutting into required size fitting & fixing by welding in superstructure wheel house, passengers accommodation, cabin etc. including cost of labour and materials complete. M. S. Plate below 5mm thick

Providing steel Fender cutting from M.S. pipe having 6 mm thick half round fitting and fixing by welding including cost of labour and materials complete. (20mm dia pipe )

Providing Double Bollard including making/ repairing of its base frame.

Double Bollard

Single Bollard

Supplying fitting and fixing M.S. pipe railing in deck and super structure of vessel / boat etc. complete as direction. (M.S. pipe)

Applying priming coat:

13.50.3- With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works

Painting on G.S. sheet with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : 13.53.1 New work (two or more coats) including a coat of approved steel primer but excluding a coat of mordant solution

Painting two coat (excluding primary coat) on new steel and other metal surface with ready Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade : 13.65.1- Two or more coats on new work

Applying a coat of mordant solution on G.S. sheet: 13.54.1 With a solution of 38 gms of copper acetate in a litre of soft water

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with piano type switch, phenolic laminated sheet, suitable size MS box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.

1.1.1-Group-A

1.1.2-Group-B

Supplying including fitting & fixing of electronics igniters complete as direction and specification by the Dept. (Philips/ Havells/Bajaj of equivalent make)

Letter writing

IWT Logo-4 nos