Loading
Loading…
Loading…
| # | Company | Amount | Status |
|---|---|---|---|
| 1 | ₹2.2 Cr | ₹2.2 Cr | - |
| 2 | Not Qualified | - | Not Qualified |
| 3 | Qualified | - | Qualified |
| 4 | Qualified | - | Qualified |
| 5 | Qualified | - | Qualified |
Tender Value
Refer Docs
EMD Value
₹5.7 L
Closing Date
15 Oct 2020, 11:00 amClosed
KIRAN
Power Grid Corporation of India Limited Northern Region-III Headquarter 12, Rana Pratap Marg Lucknow (UP) - 226001.
Construction of Balance work of New store Area including Platform, Road, Approach and culvert, Drain & Fencing at 400/220KV Kanpur Substation
5002001387/OTHERS/DOM/K00 - NR3 RHQ -1
Open
Civil - All
Works
kanpur
₹12,500
₹5.7 L
5 Jan 2021
15 Sept 2020
16 Oct 2020
15 Sept 2020
14 Oct 2020
15 Sept 2020
Felling trees of the girth (measured at a height of 1 m above ground level), including cutting of trunks and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material.Beyond 30 cm girth upto and including 60 cm girth
Felling trees of the girth (measured at a height of 1 m above ground level), including cutting of trunks and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material. Beyond 60 cm girth upto and including 120 cm girth
Felling trees of the girth (measured at a height of 1 m above ground level), including cutting of trunks and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material. Beyond 120 cm girth upto and including 240 cm girth
Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by Engineer-in- Charge: All kinds of soil
Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earthwith lead upto 50 metres.
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil
Supplying of good earth at site and filling earth in layers (each layer should not exceed 15cm) with intermediate layer of compacted layer (soil density of 98%) including compacting each layer by rolling /ramming and watering,all complete as per drawing and direction of Engineer -in -charge
Supplying and stacking at site.
Laying, spreading and compacting stone aggregate of specified sizes to WBM specifications in uniform thickness, hand picking, rolling with 3 wheeled road/vibratory roller 8-10 tonne capacity in stages to proper grade and camber, applying and brooming requisite type of screening / binding material to fill up interstices of coarse aggregate, watering and compacting to the required density .
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size)
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)
Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand)
Providing and laying C.C. pavement of mix M-25 with ready mixed concrete from batching plant. The ready mixed concrete shall be laid and finished with screed board vibrator , vacuum dewatering process and finally finished by floating, brooming with wire brush etc. complete as per specifications and directions of Engineer-incharge. (The panel shuttering work shall be paid for separately). Deduct for using of M-20 grade concrete instead of M-25 grade concrete in C.C. pavement.
Providing and fixing in position pre-moulded joint filler in expansion joints.
Providing and laying in position bitumen hot sealing compound for expansion joints etc. Using grade ‘A’ sealing compound.
Centering and shuttering including strutting, propping etc. and removal of form for :Foundations, footings, bases of columns, etc. for mass concrete
Centering and shuttering including strutting, propping etc. and removal of form for : Lintels, beams, plinth beams, girders, bressumers and cantilevers
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size)
Centering and shuttering including strutting, propping etc. and removal of form for :Foundations, footings, bases of columns, etc. for mass concrete
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:Cement mortar 1:6 (1 cement : 6 coarse sand)
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)
12 mm cement plaster finished with a floating coat of neat cement of mix : 1:4 (1 cement: 4 fine sand)
Making the opening in brick masonry including dismantling in floor or walls by cutting masonry and making good the damages to walls, flooring and jambs complete, to match existing surface i/c disposal of mulba/ rubbish to the nearest municipal dumping ground, all complete as per direction of Engineer-in-Charge. For door/ window/ clerestory window
Demolishing dry brick pitching in floors, drains etc. including stacking of serviceable material and disposal of unserviceable material within 50 metres lead
Dismantling barbed wire or flexible wire rope in fencing including making rolls and stacking within 50 metres lead.
Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)
Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar
Removing mortar from bricks and cleaning bricks including stacking within a lead of 50 m (stacks of cleaned bricks shall be measured): From brick work in cement mortar ((1LOT = 1000 nos)
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size)
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size)
Centering and shuttering including strutting, propping etc. and removal of form work for : Foundations, footings, bases for columns
Centering and shuttering including strutting, propping etc. and removal of form work for : Columns, piers, abutments, pillars, posts and struts
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.
Structural steel work in single section, fixed with or without connecting plate,including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
Finishing walls with water proofing cement paint of required shade : New work (Two or more coats applied @ 3.84 kg/10 sqm)
Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. All kinds of soil
Centering and shuttering including strutting, propping etc. and removal of form work for : Foundations, footings, bases for columns
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size)
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
Structural steel work in single section, fixed with or without connecting plate,including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge. Made of G.I. wire of dia 4 mm
Painting with aluminium paint of approved brand and manufacture to give an even shade . Two or more coats on new work
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:Cement mortar 1:6 (1 cement : 6 coarse sand)
Providing & laying 125micron polythene sheet between PCC & RCC
Supply & laying of hume pipe of grade(NP-3) excluding concreating & reinforcement 300 mm dia
Construction of Balance work of New store Area including Platform, Road, Approach and culvert, Drain & Fencing at 400/220KV Kanpur Substation
General guidelines for filling up the Attachments
While filling up the worksheets following may please be observed :
Fill up only green shaded cells.
Certain data type entries have been restricted, such as Numeric values or limits of numeric values.
Do not link any cell of this work book with any other work book.
Do not use copy & paste or cut & paste options for filling up the data.
Do not fill the cell by dragging the other cell value in down or adjacent cell.
Do not reformat any of the cell of the work book.
This Workbook consists of following worksheets :
Sole Bidder.
In case of JV partners more than 2, enter details of 3rd & more partners along with details of 2nd partner.
Fill up names and address of the Sole Bidder. Do not leave this cell blank.
Fill up date in dd-mmm-yyyy format from drop down menu.
Click for Sch-1 given at the right top of the worksheet to go to Sch-1.
Fill up unit rates for all the items in numeric values greater than 0 (zero). If unit rate is left blank, the corresponding item shall be deemed to be included in the total price.
Corresponding cell for mode of transaction shall be come enable only after filling up the unit rate, therefore first fill up the unit rate and then mode of transaction for the corresponding item.
Total amount shall get calculated automatically.
Type Test charges shall appear automatically after filling up Sch-7 appropriately.
Fill up unit rates for all the items in numeric values greater than 0 (zero). If unit rate is left blank, the corresponding item shall be deemed to be included in the total price.
Total amount shall get calculated automatically.
Fill up unit rates for all the items in numeric values greater than 0 (zero). If unit rate is left blank, the corresponding item shall be deemed to be included in the total price.
Total amount shall get calculated automatically.
Not applicable, hence no cell is required to be filled up.
Fill up applicable rate of Excise Duty. The amount of Excise Duty on the items mentioned as Direct in the mode of transaction in Schedule-1 shall be calculated automatically at the rate mentioned by the bidder here.
Segregate and fill up the amount on which Sales Tax shall be applicable out of Ex-works supply items mentioned as direct in the mode of transaction in Schedule-1. Applicable Excise Duty on this amount will be calculated automatically at the rate mentioned by the bidder. Further, fill up the rate of applicable Sales Tax. Amount of Sales Tax shall be automatically calculated on the amount mentioned by the bidder as subjected to Sales Tax plus applicable Excise Duty at the rate mentioned by the Bidder.
Difference of total amount quoted by the bidder as Direct Transaction and the amount mentioned by him subjected to Sales Tax shall be considered as the amount on which VAT shall become applicable and the same shall be calculated & displayed automatically. Applicable Excise Duty on this amount at the rate mentioned by the bidder shall also be calculated & displayed automatically. Fill up the rate of applicable VAT. The amount of VAT shall be calculated automatically on the amount considered to be subjected to VAT plus applicable Excise Duty at the rate mentioned by the bidder here.
Amount as per details filled up by the bidder in the work sheets Entry Tax, Octroi and other Taxes & Duties shall be displayed in this work sheet Sch-5 but will not be added to the grand total and shall be considered as applicable.
Click at the links to go to the work sheets Entry Tax, Octroi and other Taxes & Duties one by one.
Fill the description, amount and rate of applicable Entry Tax. Total of this worksheet shall be displayed in Sch -1A (Taxes & Duties)
Click at the link to go back to Sch-1A.
Fill the description, amount and rate of applicable Octroi. Total of this worksheet shall be displayed in Sch -1A (Taxes & Duties)
Click at the link to go back to Sch-1A.
Fill the description, amount and rate of applicable Other Taxes & Duties. Total of this worksheet shall be displayed in Sch -1A (Taxes & Duties)
Click at the link to go back to Sch-1A.
Summary of all the Schedules without considering discount (mentioned in the work sheet discount) shall be displayed automatically.
No cell is required to be filled in by the bidder in this worksheet.
Fill up the rates & location where type tests are proposed.
Total of this Sch-7 shall automatically appear in Sch-1.
Fill up ref. no. as bidder's ref no. of this letter.
This letter shall consider the net price as per Sch-2A.
Fill up names & Designation of the representatives of bidder.
Fill up additional information as required.
Bid Proposal Form 1st Envelope
the receipt of which is hereby acknowledged, we the undersigned, offer to execute the Works under the above-named package in full conformity with the said Bidding Documents. In accordance with ITB Clause 6.1 of the Bidding Documents, as per which the bid shall be submitted by the bidder under “Single Stage - Two Envelope” procedure of bidding. Accordingly, we hereby submit our Bid, in two envelopes i.e. First Envelope (containing EMD and Techno-commercial part) and Second Envelope - Price Part (to be opened subsequently)
Construction of Balance work of New store Area including Platform, Road, Approach and culvert, Drain & Fencing at 400/220KV Kanpur Substation
For Attachment-1, bidder has to fill the following data
FALSE
Are you NSIC/MSME Registered:
Bank Guarantee No.
All the prices and the price components stated in our bid price are firm in accordance with provisions of the bidding documents. All the prices and other terms and conditions of this proposal are valid for a period of Six [06] calendar Months from the date of opening of the bid
Erection Charges excluding GST
Name & Address of agent
Designation:
(Written power of Attorney of Signatories of bid to commit the Bidder must be enclosed with the bid. Bidders may use their own proforma for furnishing the required information with the bid)
Attachment-3
Particulars
Financial Year
Financial Year
Description
Description
Name & details of the Work
Ref. No. of Award Letter/Contract/WO
Date of Award Letter/Contract/WO (in dd-mm-yyyy format)
Name of the Client with Contact details
Value of Work as per Award Letter/Contract/WO
Value of Work as per Final Execution
Scheduled Date of Completion as per the Contract (in dd-mm-yyyy format)
Date of actual Completion (in dd-mm-yyyy format)
Copy of Award Letter/Contract/WO enclosed: (YES/NO)
Reference Details of Completion Certificate/Performance Certificate/Any Other document like Acceptance of Final Bill by client issued by the client
Ref. No. of Completion/Performance Certificate
Date of issue of Completion/Performance Certificate (in dd-mm-yyyy format)
Name and Designation of person issuing Completion/Performance Certificate
Name of Company/Client who have issued Completion/Performance Certificate
Date of actual Completion as per Completion/Performance Certificate (in dd-mm-yyyy format)
Amount of final work as per Completion/Performance Certificate
Copy of Completion/Performance Certificate attached/enclosed: (YES/NO)
File name by which Completion/Performance Certificate is attached/uploaded
Document Submitted
Affidavit for Proprietorship
Other Documents
PAN Detail
Copy of Partnership Deed/ affidavit for Proprietorship/ Company MoA and AoA or Certificate of Incorporation, as applicable submitted (Y/N)
DD-MM-YYYY
Attachment-4
Ref. of page, Clause & Name of Documents
DD-MM-YYYY
Ref. of page, Clause & Name of Documents
DD-MM-YYYY
Vol./ Clause
DD-MM-YYYY
Vol./ Clause
DD-MM-YYYY
Vol./ Section
DD-MM-YYYY
Vol./ Section
DD-MM-YYYY
Attachment-5
Name of the person with designation in POWERGRID
DD-MM-YYYY
Attachment-5A
Item Description
Category (Micro or Small)
DD-MM-YYYY
Attachment-5A
Item Description
Category (Micro or Small)
DD-MM-YYYY
Attachment-6
Name of Activity
Completion
DD-MM-YYYY
Attachment-7
DD-MM-YYYY
Attachment- 8
Contracts & Materials Department
3rd Floor, 12, Rana Pratap Marg,
Name of Materials/Labour
High Speed Diesel coefficient
Labour coefficient
Ferrous Metals coefficient
High Speed Diesel, coefficient a =
Labour, coefficient l =
Cement & Lime, coefficient b =
Structural Clay Products coefficient
DD-MM-YYYY
Attachment-9
DD-MM-YYYY
Attachment- 10
Name of client, cause of litigation/arbitration and matter in dispute
Name of Client
Value of outstanding work (Rs.)
DD-MM-YYYY
Brief description of Information
The Bidder should accordingly upload the scanned copies of the relevant documents (Refer Clause 6.3 of ITB, Volume - IA of bidding documents).
DD-MM-YYYY
Attachment-11
DD-MM-YYYY
ATTACHMENT-13
We are furnishing the following details of Statutory Registration Numbers and details of Bank for electronic payment.
Name of the Supplier/ Contractor in whose favour payment is to be made
Address with PIN Code and State
Status – Company/others
Are you a MSE owned by SC/ST* entrepreneurs in line with Public Procurement Policy for Micro & Small Enterprises (MSEs) order 2012 including subsequent Amendment/notification/order (Indicate Yes/No)
If 3(b) is 'Yes', please mention whether you are (Proprietary MSE/Private Limited Company) owned by SC/ST Entrepreneurs
Are you a MSE owned by Women in line with Public Procurement Policy for Micro & Small Enterprises (MSEs) order 2012, Public Procurement Policy for Micro & Small Enterprises (MSEs) Amendment order 2018 including subsequent Amendment/notification/order (Indicate Yes/No)
Permanent Account (PAN) No.
GSTIN Numbers
GSTIN in the States/UT from where the Supply of Goods takes place
GSTIN No.
GSTIN No.
PF Registration No. of the Company
PF Regional Office covered (with Address)
Name of Contact Person
Telephone No(s)
Bank Details for Electronic Payment
Current Account
9 digit MICR code printed at bottom in middle, next to cheque no.
IFSC (for RTGS)/NEFT Code (to be obtained from the Bank) Sample Cancelled Cheque to be enclosed
In case of proprietary MSE, proprietor(s) shall be SC/ST.
In case of partnership MSE, the SC/ST partners shall be holding atleast 51% shares in the unit.
In case of Private Limited companies, atleast 51% share shall be held by SC/ST promoters.
DD-MM-YYYY
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html
11A-GCC CIVIL WORKS Vol-I (1).pdf
pdf • 0.58 MB
11B-GCC CIVIL WORKS Vol-I (2).pdf
pdf • 0.15 MB
11C -GCC CIVIL WORKS Vol-I (1).pdf
pdf • 0.17 MB
11D -GCC CIVIL WORKS Vol-I (3).pdf
pdf • 0.09 MB
~$A Covering Letter.doc
doc • 0.00 MB
~$A Instructions to Bidders.doc
doc • 0.00 MB
~$A_ANNEXURE-I (ITB)_EMD.doc
doc • 0.00 MB
~$B_Annexure-III (ITB)_QR.doc
doc • 0.00 MB
~$C_Annexure-II (ITB)_QR.doc
doc • 0.00 MB
~$Invitation to Bids(INV).docx
docx • 0.00 MB
~WRL0001.tmp
tmp • 0.08 MB
~WRL0005.tmp
tmp • 0.16 MB
02A Instructions to Bidders.doc
doc • 0.29 MB
02B_ANNEXURE-I (ITB)_EMD.doc
doc • 0.08 MB
02C_Annexure-II (ITB)_QR.doc
doc • 0.06 MB
02D_Annexure-III(ITB)-e-RA( Applicable).docx
docx • 0.02 MB
02E-Annexure - IV (ITB) Make in India (Not Applicable).docx
docx • 0.02 MB
02F-Annexure-IV (ITB) E-RA-Business Rules(Applicable).docx
docx • 0.03 MB
1_Invitation to Bids(INV).docx
docx • 0.04 MB
~$ Special Conditions of Contract.doc
doc • 0.00 MB
~WRL2639.tmp
tmp • 0.11 MB
03 Special Conditions of Contract.doc
doc • 0.14 MB
03A_ANNEXURE-I (SCC)_CPG.doc
doc • 0.07 MB
03B_ANNEXURE-II (SCC)_Procurement from MSE.doc
doc • 0.09 MB
5 SFQP_Civil works for Site Packages_Rev_03.pdf
pdf • 5.23 MB
Drawings.pdf
pdf • 0.56 MB
TS STORAGRE PLATFORM.pdf
pdf • 0.29 MB
(Mandatory) Attachment 9P- Integrity Pact.pdf
pdf • 0.20 MB
~$tachment 14- Affidavit for self-certification.DOCX
docx • 0.00 MB
Attachment 12.doc
doc • 0.03 MB
Attachment -17-Declaration by the Bidder regarding events encountered.docx
docx • 0.03 MB
attachment 18- certificate by bidder.docx
docx • 0.02 MB
Attachment-16-E-RA(Applicable).docx
docx • 0.02 MB
BOM.xlsx
xlsx • 0.01 MB
Check List before Uploading bids.docx
docx • 0.02 MB
First Envelope-Bid Form and Attachments-Volume-III.xlsx
xlsx • 0.29 MB
F__NR-III_Dated_7.09.2016_Work_NIT-2020_01-OPEN_20-_Balance_civil_work_kanpur_SS_Bidding_Document_Notification.pdf
pdf • 0.06 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .